Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932849Ab0DHPrt (ORCPT ); Thu, 8 Apr 2010 11:47:49 -0400 Received: from mail-fx0-f223.google.com ([209.85.220.223]:42710 "EHLO mail-fx0-f223.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932763Ab0DHPrp (ORCPT ); Thu, 8 Apr 2010 11:47:45 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:cc:subject:message-id:mime-version:content-type :content-disposition:content-transfer-encoding:in-reply-to :user-agent; b=kZfrAAgOLvzT7E+R0q9Dm5eQDS1m7rV7Xt+FkFR/wrKavzJhQcobRFkvMmxxw9tzzs CmZCUd6BfJhT31Is0tL0h7F90STGjZxRts0o4BEC/xuioF/r9YbI1obt1Xvbm8Pzqeqg Sccf6AOtQcjUTgoytlsCRC40PpPqUcyYzxVTA= Date: Thu, 8 Apr 2010 17:47:49 +0200 From: Martin Jansa To: Zaurus PDA developers list Cc: Eric Miao , thommycheck@gmail.com, lenz@cs.wisc.edu, dbaryshkov@gmail.com, Cyril Hrubis , arminlitzel@web.de, kernel list , "Rafael J. Wysocki" , Marek Vasut , rpurdie@rpsys.net, linux-arm-kernel@lists.infradead.org, maciej.rutecki@gmail.com Subject: Re: [Zaurus-devel] [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots Message-ID: <20100408154749.GE3269@jama> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20100408110533.GA14451@atrey.karlin.mff.cuni.cz> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14172 Lines: 315 On Thu, Apr 08, 2010 at 01:05:32PM +0200, Pavel Machek wrote: > > > >> > > > > I tried compiling 2.6.34-rc1, and it does not boot :-(. It does not > > >> > > > > seem to even reset the framebuffer (I'm using kexec -- so it stays > > >> > > > > stuck on on previous screen). > > >> > > > > >> > > Tried again with -rc2 and -rc3, and neither boots :-(. I did not have > > >> > > time to set up serial console, yet :-(. Any ideas? > > >> > > > >> > I created a Bugzilla entry at > > >> > https://bugzilla.kernel.org/show_bug.cgi?id=15712 > > >> > for your bug report, please add your address to the CC list in there, > > >> >  thanks! > > >> > > > >> Pavel, you broke it ... and here you say something about sane arm maintainers > > >> ;-) > > > > > > ? You know which patch causes it ? > > > > Just have some time to try this out on my corgi, and the kernel runs > > happily. > > > > Pavel, > > > > Which exact model are you running your kernel? > > It is Zaurus SL-C3000 (aka spitz). I'm using kexec, but that used to > work. Should I try minimal config? > Pavel FYI: I've just booted on my spitz 2.6.34-rc3 built with OE (config from Andrea), then kexec to 2.6.33. http://git.openembedded.org/cgit.cgi/openembedded/commit/?id=adadb0343015894e33032b53d87e3e03a368a594 ��Linux version 2.6.34-rc3 (bitbake@jama) (gcc version 4.3.3 (GCC) ) #1 Wed Apr 7 09:53:53 CEST 2010 CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE), cr=0000397f CPU: VIVT data cache, VIVT instruction cache Machine: SHARP Spitz Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writeback Run Mode clock: 208.00MHz (*16) Turbo Mode clock: 416.00MHz (*2.0, active) Memory clock: 208.00MHz (/2) System bus clock: 208.00MHz Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=tty1 console=ttyS0,115200n8 fbcon=rotate:1 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62256k/62256k available, 3280k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc4800000 - 0xe8000000 ( 568 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc007c000 ( 464 kB) .text : 0xc007c000 - 0xc027d000 (2052 kB) .data : 0xc027e000 - 0xc02970e0 ( 101 kB) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:288 start_kernel(): bug: interrupts were enabled early Console: colour dummy device 80x30 console [tty1] enabled Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized Sharp Scoop Device found at 0x10800000 -> 0xc4814000 Sharp Scoop Device found at 0x08800040 -> 0xc4818040 bio: create slab at 0 I2C: i2c-0: PXA I2C adapter Switching to clocksource oscr0 Switched to NOHz mode on CPU #0 JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 121 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) Console: switching to colour frame buffer device 80x30 pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART console [ttyS0] enabled pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 physmap platform flash device: 00800000 at 00000000 RedBoot partition parsing not available Using physmap partition information Creating 1 MTD partitions on "physmap-flash": 0x000000140000-0x000000800000 : "Boot PROM Filesystem" NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V 8-bit) Scanning device for bad blocks Creating 3 MTD partitions on "sharpsl-nand": 0x000000000000-0x000000700000 : "System Area" 0x000000700000-0x000000c00000 : "Root Filesystem" 0x000000c00000-0x000001000000 : "Home Filesystem" mice: PS/2 mouse device common for all mice input: matrix-keypad as /devices/platform/matrix-keypad/input/input0 ads7846 spi2.0: touchscreen, irq 107 input: ADS7846 Touchscreen as /devices/platform/pxa2xx-spi.2/spi2.0/input/input1 APM Battery Driver CAUTION: XScale iWMMXt coprocessor detected, but kernel support is missing. Freeing init memory: 464K mmc0: new SD card at address 0001 mmcblk0: mmc0:0001 128MB 119 MiB mmcblk0: p1 pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 pcmcia 0.0: pcmcia: registering new device pcmcia0.0 pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 pcmcia 1.0: pcmcia: registering new device pcmcia1.0 hda: HMS360404D5CF00, CFA DISK drive Uncompressing Linux... done, booting the kernel. Linux version 2.6.33 (bitbake@jama) (gcc version 4.3.3 (GCC) ) #1 Thu Feb 25 09:29:39 CET 2010 CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE), cr=0000397f CPU: VIVT data cache, VIVT instruction cache Machine: SHARP Spitz Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 16384 free_area_init_node: node 0, pgdat c02fbee8, node_mem_map c0338000 Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3 Run Mode clock: 208.00MHz (*16) Turbo Mode clock: 416.00MHz (*2.0, active) Memory clock: 208.00MHz (/2) System bus clock: 208.00MHz Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext3 rootwait mtdparts=sharpsl-nand:7168k(smf),5120k(root),-(home) fbcon=rotate:1 console=ttyS0,115200n8 console=tty1 noinitrd fbcon=rotate:1 debug PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61620KB available (2724K code, 355K data, 88K init, 0K highmem) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:288 Console: colour dummy device 80x30 console [tty1] enabled Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized NET: Registered protocol family 16 Sharp Scoop Device found at 0x10800000 -> 0xc4814000 Sharp Scoop Device found at 0x08800040 -> 0xc4818040 bio: create slab at 0 I2C: i2c-0: PXA I2C adapter Switching to clocksource oscr0 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 JFFS2 version 2.2. (NAND) (SUMMARY) �੩ 2001-2006 Red Hat, Inc. msgmni has been set to 120 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered (default) Console: switching to colour frame buffer device 80x30 PXA Overlay driver loaded successfully! pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART console [ttyS0] enabled pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 physmap platform flash device: 00800000 at 00000000 RedBoot partition parsing not available Using physmap partition information Creating 1 MTD partitions on "physmap-flash": 0x000000140000-0x000000800000 : "Boot PROM Filesystem" NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V 8-bit) Scanning device for bad blocks 3 cmdlinepart partitions found on MTD device sharpsl-nand Creating 3 MTD partitions on "sharpsl-nand": 0x000000000000-0x000000700000 : "smf" 0x000000700000-0x000000c00000 : "root" 0x000000c00000-0x000001000000 : "home" mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 input: matrix-keypad as /devices/platform/matrix-keypad/input/input1 ads7846 spi2.0: touchscreen, irq 107 pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 pcmcia 0.0: pcmcia: registering new device pcmcia0.0 pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 pcmcia 1.0: pcmcia: registering new device pcmcia1.0 input: ADS7846 Touchscreen as /devices/platform/pxa2xx-spi.2/spi2.0/input/input2 APM Battery Driver TCP cubic registered XScale iWMMXt coprocessor detected. Probing IDE interface ide0... mmc0: new SDHC card at address 8131 mmcblk0: mmc0:8131 SD08G 7.50 GiB mmcblk0: p1 p2 p3 hda: HMS360404D5CF00, CFA DISK drive ide0 at 0xc4840000-0xc4840007,0xc484000e on irq 202 hda: max request size: 128KiB hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 ide-cs: hda: Vpp = 0.0 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 179:1. devtmpfs: mounted Freeing init memory: 88K usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub pxa27x_udc: version 2008-04-18 NET: Registered protocol family 23 usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 In ohci_hcd_pxa27x_drv_probe pxa27x-ohci pxa27x-ohci: PXA27x OHCI drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1 pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000 pxa27x-ohci pxa27x-ohci: ohci_pxa27x_start, ohci:c328cc94 pxa27x-ohci pxa27x-ohci: created debug files pxa27x-ohci pxa27x-ohci: OHCI controller state pxa27x-ohci pxa27x-ohci: OHCI 1.0, NO legacy support registers pxa27x-ohci pxa27x-ohci: control 0x083 HCFS=operational CBSR=3 pxa27x-ohci pxa27x-ohci: cmdstatus 0x00000 SOC=0 pxa27x-ohci pxa27x-ohci: intrstatus 0x00000004 SF pxa27x-ohci pxa27x-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH pxa27x-ohci pxa27x-ohci: hcca frame #0027 pxa27x-ohci pxa27x-ohci: roothub.a 04001202 POTPGT=4 NOCP NPS NDP=2(3) pxa27x-ohci pxa27x-ohci: roothub.b 00000000 PPCM=0000 DR=0000 pxa27x-ohci pxa27x-ohci: roothub.status 00008000 DRWE pxa27x-ohci pxa27x-ohci: roothub.portstatus [0] 0x00000100 PPS pxa27x-ohci pxa27x-ohci: roothub.portstatus [1] 0x00000100 PPS pxa27x-ohci pxa27x-ohci: roothub.portstatus [2] 0x00000100 PPS usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: PXA27x OHCI usb usb1: Manufacturer: Linux 2.6.33 ohci_hcd usb usb1: SerialNumber: pxa27x usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: no over-current protection hub 1-0:1.0: power on to power good time: 8ms hub 1-0:1.0: 150mA bus power budget for each child hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' hostap_cs: setting Vcc=33 (constant) Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt->io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 hostap_cs: Registered netdevice wifi0 hostap_cs: index 0x01: , irq 201, io 0xc4820000-0xc482003f prism2_hw_init: initialized in 870 ms wifi0: NIC: id=0x800c v1.0.0 usb usb1: uevent wifi0: PRI: id=0x15 v1.1.1 wifi0: STA: id=0x1f v1.8.2 wifi0: registered netdevice wlan0 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode EXT3-fs (mmcblk0p1): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (mmcblk0p1): using internal journal .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution zjama ttyS0 Angstrom 2010.4-test-20100401 zjama ttyS0 zjama login: -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/