Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754148Ab0DLU7J (ORCPT ); Mon, 12 Apr 2010 16:59:09 -0400 Received: from mga05.intel.com ([192.55.52.89]:7385 "EHLO fmsmga101.fm.intel.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754130Ab0DLU7G (ORCPT ); Mon, 12 Apr 2010 16:59:06 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.52,192,1270450800"; d="scan'208";a="788510431" Date: Mon, 12 Apr 2010 13:58:37 -0700 From: Sarah Sharp To: Robert Hancock Cc: Daniel Mack , alsa-devel@alsa-project.org, Greg KH , Takashi Iwai , Greg KH , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Alan Stern , Pedro Ribeiro , akpm@linux-foundation.org Subject: Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems Message-ID: <20100412205837.GA18665@xanatos> References: <20100408003313.GE4365@kroah.com> <4BBE6E57.6020600@gmail.com> <20100409165014.GC5184@xanatos> <20100410083453.GN30801@buzzloop.caiaq.de> <20100412185621.GA6101@xanatos> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3440 Lines: 67 On Mon, Apr 12, 2010 at 02:39:04PM -0600, Robert Hancock wrote: > On Mon, Apr 12, 2010 at 12:56 PM, Sarah Sharp > wrote: > > On Sat, Apr 10, 2010 at 11:02:53AM -0600, Robert Hancock wrote: > >> On Sat, Apr 10, 2010 at 2:34 AM, Daniel Mack wrote: > >> > On Fri, Apr 09, 2010 at 05:38:13PM -0600, Robert Hancock wrote: > >> >> On Fri, Apr 9, 2010 at 10:50 AM, Sarah Sharp > >> >> wrote: > >> >> > What makes you think that? ?I've seen URB buffers with 64-bit DMA > >> >> > addresses. ?I can tell when the debug polling loop runs and I look at > >> >> > the DMA addresses the xHCI driver is feeding to the hardware: > >> >> > > >> >> > Dev 1 endpoint ring 0: > >> >> > xhci_hcd 0000:05:00.0: @71a49800 01000680 00080000 00000008 00000841 > >> >> > > >> >> > So the TRB at address 71a49800 is pointing to a buffer at address > >> >> > 0x0008000001000680. > >> >> > >> >> I'm not sure why the address would be that huge, unless it's not > >> >> actually a physical address, or there's some kind of remapping going > >> >> on? > >> >> > >> >> > > >> >> > If I'm setting a DMA mask wrong somewhere, or doing something else to > >> >> > limit the DMA to 32-bit, then please let me know. > >> >> > >> >> The DMA mask for the controller isn't being set anywhere (in the > >> >> version that's in Linus' current git anyway). In that case it'll > >> >> default to 32-bit and any DMA mappings above 4GB will need to be > >> >> remapped. The controller driver doesn't do the mapping itself but the > >> >> USB core does, passing in the controller device as the one doing the > >> >> DMA, so if the controller's DMA mask is set to 32-bit then the buffers > >> >> passed in will get remapped/bounced accordingly. > >> > > >> > So if we're seeing physical addresses in the log above, and the xHCI > >> > driver does not explicitly allow the USB core to use addresses above > >> > 4GB, why shouldn't the same thing be true as well for EHCI? > >> > (Which would then be exactly the case we're seeing) > >> > >> That is a bit suspicious, yes. With the DMA mask at default I don't > >> expect that should happen. Sarah, what kind of traffic was happening > >> when you saw that (bulk, isochronous, etc)? > > > > Ring 0 is the default control ring, so it must be control transfers. > > That's the first control transfer on the ring (and it didn't fill), so > > it must have come from the USB core. > > > > I was running the USB mass storage driver, and the bulk endpoint rings > > don't have the high 32-bits of the address set. ?It mostly uses the > > scatter-gather interface, which calls usb_buffer_map_sg(), so that's not > > surprising. > > Is this machine using an IOMMU or something which would be remapping > physical addresses? That address 0x0008000001000680 seems huge, I > don't see how it could even be a valid bus address otherwise.. Oh, shoot, nevermind. That TRB has a slightly different format, where the setup data for the control transfer is substituted for the DMA buffer address. I'll have to look through my logs to see if there's any real 64-bit DMA addresses in there, and fix xHCI's DMA mask. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/