Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753993Ab0DSMDQ (ORCPT ); Mon, 19 Apr 2010 08:03:16 -0400 Received: from cpsmtpb-ews01.kpnxchange.com ([213.75.39.4]:3513 "EHLO cpsmtpb-ews01.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753866Ab0DSMDO (ORCPT ); Mon, 19 Apr 2010 08:03:14 -0400 From: Frans Pop To: Dave Airlie Subject: Re: [regression,bisected] Missing boot messages with VESAFB after VT initialization Date: Mon, 19 Apr 2010 14:03:08 +0200 User-Agent: KMail/1.9.9 Cc: linux-kernel@vger.kernel.org, "H. Peter Anvin" , x86@kernel.org References: <201004171718.55867.elendil@planet.nl> <1271625028.19111.0.camel@t60prh> In-Reply-To: <1271625028.19111.0.camel@t60prh> MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_9ZEzLEmRLWYbOlg" Message-Id: <201004191403.09593.elendil@planet.nl> X-OriginalArrivalTime: 19 Apr 2010 12:03:09.0763 (UTC) FILETIME=[475B6930:01CADFB8] X-RecipientDomain: vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38822 Lines: 781 --Boundary-00=_9ZEzLEmRLWYbOlg Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Sunday 18 April 2010, you wrote: > On Sat, 2010-04-17 at 17:18 +0200, Frans Pop wrote: > > Initially all messages from init scripts are displayed correctly, but > > after the init script to set up the VT1-VT6 is run, messages from init > > scripts are no longer displayed. Instead the display is blank with > > only a cursor. > > > > However, if I switch back to VT1 from X.Org after the boot has > > completed, the missing messages are visible. > > > > System is x86_64 running Debian stable ("Lenny"). I'm using VESAFB > > (vga=791) and no KMS. > > > > I've bisected this to the following commit: > > commit 477346ff74f4c2aed50e8a0db96a61069f3e5b80 > > Author: Dave Airlie > > Date: Thu Jan 7 17:04:54 2010 +1000 > > x86-64: Allow fbdev primary video code > > Can you diff dmesg with/without this? There is no relevant difference between the dmesg for 477346ff ("bisect-5": bad) and its predecessor b0483e78 ("bisect-6": good). See attachment. > It shouldn't do anything unless you have multiple framebuffer drivers. Unfortunately "shouldn't" isn't always the same as "doesn't" :-) $ cat /proc/fb 0 VESA VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) Cheers, FJP --Boundary-00=_9ZEzLEmRLWYbOlg Content-Type: text/x-diff; charset="utf-8"; name="dmesg_2.6.34-bisect.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_2.6.34-bisect.diff" --- ../aragorn/2.6.34-bisect-5 2010-04-19 13:53:01.000000000 +0200 +++ ../aragorn/2.6.34-bisect-6 2010-04-19 13:45:17.000000000 +0200 @@ -1,674 +1,674 @@ -Linux version 2.6.34-bisect (fjp@aragorn) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #10 SMP Sat Apr 17 16:35:15 CEST 2010 +Linux version 2.6.34-bisect (fjp@aragorn) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #11 SMP Sat Apr 17 16:46:53 CEST 2010 Command line: root=/dev/mapper/main-root ro vga=791 quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable) BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved) BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS) BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. No AGP bridge found last_pfn = 0x7e7b0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F000000 mask FFF000000 uncachable 2 base 07E800000 mask FFF800000 uncachable 3 base 0FEDA0000 mask FFFFE0000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007e7b0000 0000000000 - 007e600000 page 2M 007e600000 - 007e7b0000 page 4k kernel direct mapping tables up to 7e7b0000 @ 8000-c000 -RAMDISK: 37a74000 - 37feffa4 +RAMDISK: 37a74000 - 37fefdac ACPI: RSDP 00000000000f7980 00024 (v02 HP ) ACPI: XSDT 000000007e7c81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 000000007e7c8084 000F4 (v04 HP 30C9 00000003 HP 00000001) ACPI: DSDT 000000007e7c8538 13484 (v01 HP nc2500 00010000 MSFT 03000001) ACPI: FACS 000000007e7e7d80 00040 ACPI: SLIC 000000007e7c8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 000000007e7c83bc 00038 (v01 HP 30C9 00000001 HP 00000001) ACPI: APIC 000000007e7c83f4 00068 (v01 HP 30C9 00000001 HP 00000001) ACPI: MCFG 000000007e7c845c 0003C (v01 HP 30C9 00000001 HP 00000001) ACPI: TCPA 000000007e7c8498 00032 (v02 HP 30C9 00000001 HP 00000001) ACPI: ASF! 000000007e7c84cc 00069 (v16 HP CHIMAYU 00000001 HP 00000000) ACPI: SSDT 000000007e7db9bc 002BE (v01 HP HPQPAT 00000001 MSFT 03000001) ACPI: SSDT 000000007e7dc640 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc89f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc945 004D7 (v01 HP CpuPm 00003000 INTL 20060317) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 007e7b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00015bee70] TEXT DATA BSS ==> [0001000000 - 00015bee70] - #2 [0037a74000 - 0037feffa4] RAMDISK ==> [0037a74000 - 0037feffa4] + #2 [0037a74000 - 0037fefdac] RAMDISK ==> [0037a74000 - 0037fefdac] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [00015bf000 - 00015bf18c] BRK ==> [00015bf000 - 00015bf18c] #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001a00000-ffff8800035fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007e7b0 On node 0 totalpages: 517967 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 7027 pages used for memmap DMA32 zone: 506941 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 7f000000 (gap: 7f000000:7fc00000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001600000 s82008 r8192 d24488 u1048576 pcpu-alloc: s82008 r8192 d24488 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510779 Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found -Memory: 2027468k/2072256k available (2732k kernel code, 388k absent, 43660k reserved, 1952k data, 524k init) +Memory: 2027468k/2072256k available (2732k kernel code, 388k absent, 43660k reserved, 1953k data, 524k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT -Detected 1330.008 MHz processor. -Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.01 BogoMIPS (lpj=5320032) +Detected 1329.929 MHz processor. +Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.85 BogoMIPS (lpj=5319716) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 -ftrace: allocating 13895 entries in 55 pages +ftrace: allocating 13894 entries in 55 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d Booting Node 0, Processors #1 Ok. CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs -Total of 2 processors activated (5319.99 BogoMIPS). +Total of 2 processors activated (5319.82 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [C29F] (on) ACPI: Power Resource [C1C7] (off) ACPI: Power Resource [C3AD] (off) ACPI: Power Resource [C3B0] (off) ACPI: Power Resource [C3C3] (off) ACPI: Power Resource [C3C4] (off) ACPI: Power Resource [C3C5] (off) ACPI: Power Resource [C3C6] (off) ACPI: Power Resource [C3C7] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [C003] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x7e800000-0xfedfffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xfffffffe] invalid; aligning end to 16-byte boundary pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xe0400000-0xe04fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x2000-0x2007] pci 0000:00:02.1: reg 10: [mem 0xe0500000-0xe05fffff 64bit] pci 0000:00:03.0: reg 10: [mem 0xe0600000-0xe060000f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10: [io 0x2008-0x200f] pci 0000:00:03.2: reg 14: [io 0x2010-0x2013] pci 0000:00:03.2: reg 18: [io 0x2018-0x201f] pci 0000:00:03.2: reg 1c: [io 0x2020-0x2023] pci 0000:00:03.2: reg 20: [io 0x2030-0x203f] pci 0000:00:03.3: reg 10: [io 0x2040-0x2047] pci 0000:00:03.3: reg 14: [mem 0xe0601000-0xe0601fff] pci 0000:00:19.0: reg 10: [mem 0xe0620000-0xe063ffff] pci 0000:00:19.0: reg 14: [mem 0xe0640000-0xe0640fff] pci 0000:00:19.0: reg 18: [io 0x2060-0x207f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x2080-0x209f] pci 0000:00:1a.1: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1a.7: reg 10: [mem 0xe0641000-0xe06413ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xe0644000-0xe0647fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x20c0-0x20df] pci 0000:00:1d.1: reg 20: [io 0x20e0-0x20ff] pci 0000:00:1d.2: reg 20: [io 0x2100-0x211f] pci 0000:00:1d.7: reg 10: [mem 0xe0648000-0xe06483ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x2120-0x212f] pci 0000:00:1c.0: PCI bridge to [bus 08-08] pci 0000:10:00.0: reg 10: [mem 0xe0000000-0xe0001fff 64bit] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 10-10] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] pci 0000:02:06.0: reg 10: [mem 0xe0100000-0xe0100fff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: reg 10: [mem 0xe0101000-0xe01017ff] pci 0000:02:06.1: supports D1 D2 pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.1: PME# disabled pci 0000:02:06.2: reg 10: [mem 0xe0102000-0xe01020ff] pci 0000:02:06.2: supports D1 D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.2: PME# disabled pci 0000:02:06.3: reg 10: [mem 0xe0103000-0xe01030ff] pci 0000:02:06.3: supports D1 D2 pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.3: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs *10 11) ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20091214/pci_link-184) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0x7e7fffff] could not be reserved system 00:0a: [io 0x0500-0x055f] has been reserved system 00:0a: [io 0x0800-0x080f] has been reserved system 00:0a: [mem 0xffb00000-0xffbfffff] has been reserved system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved system 00:0c: [io 0x04d0-0x04d1] has been reserved system 00:0c: [io 0x02f8-0x02ff] has been reserved system 00:0c: [io 0x03f8-0x03ff] has been reserved system 00:0c: [io 0x1000-0x107f] has been reserved system 00:0c: [io 0x1100-0x113f] has been reserved system 00:0c: [io 0x1200-0x121f] has been reserved system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved system 00:0c: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0c: [mem 0xfed90000-0xfed99fff] has been reserved system 00:0d: [mem 0x000cee00-0x000cffff] has been reserved system 00:0d: [mem 0x000d2000-0x000d3fff] has been reserved system 00:0d: [mem 0xfeda0000-0xfedbffff] has been reserved system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:00:1e.0: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:00:1c.0: PCI bridge to [bus 08-08] pci 0000:00:1c.0: bridge window [io disabled] pci 0000:00:1c.0: bridge window [mem disabled] pci 0000:00:1c.0: bridge window [mem pref disabled] pci 0000:00:1c.1: PCI bridge to [bus 10-10] pci 0000:00:1c.1: bridge window [io disabled] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff] pci 0000:00:1c.1: bridge window [mem pref disabled] pci 0000:02:06.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:02:06.0: BAR 10: assigned [mem 0x84000000-0x87ffffff] pci 0000:02:06.0: BAR 7: assigned [io 0x3000-0x30ff] pci 0000:02:06.0: BAR 8: assigned [io 0x3400-0x34ff] pci 0000:02:06.0: CardBus bridge to [bus 03-06] pci 0000:02:06.0: bridge window [io 0x3000-0x30ff] pci 0000:02:06.0: bridge window [io 0x3400-0x34ff] pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:02:06.0: bridge window [mem 0x84000000-0x87ffffff] pci 0000:00:1e.0: PCI bridge to [bus 02-03] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:10: resource 1 [mem 0xe0000000-0xe00fffff] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe03fffff] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:02: resource 3 [io 0x0000-0xffff] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:03: resource 0 [io 0x3000-0x30ff] pci_bus 0000:03: resource 1 [io 0x3400-0x34ff] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:03: resource 3 [mem 0x84000000-0x87ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 4, 98304 bytes) UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5615k freed audit: initializing netlink socket (disabled) -type=2000 audit(1271677647.651:1): initialized +type=2000 audit(1271677401.651:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3972 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 7616k vesafb: mode is 1024x768x16, linelength=2048, pages=3 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 17) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 -rtc_cmos 00:06: setting system clock to 2010-04-19 11:47:28 UTC (1271677648) +rtc_cmos 00:06: setting system clock to 2010-04-19 11:43:22 UTC (1271677402) Freeing unused kernel memory: 524k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Fan [C3B1] (off) ACPI: Fan [C3B2] (off) ACPI: Fan [C3C8] (off) ACPI: Fan [C3C9] (off) ACPI: Fan [C3CA] (off) ACPI: Fan [C3CB] (off) ACPI: Fan [C3CC] (off) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ6] (25 C) thermal LNXTHERM:02: registered as thermal_zone1 -ACPI: Thermal Zone [TZ0] (54 C) +ACPI: Thermal Zone [TZ0] (53 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ1] (55 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (43 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (30 C) thermal LNXTHERM:06: registered as thermal_zone5 -ACPI: Thermal Zone [TZ5] (49 C) -ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 -ehci_hcd 0000:00:1a.7: setting latency timer to 64 -ehci_hcd 0000:00:1a.7: EHCI Host Controller -ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 -ehci_hcd 0000:00:1a.7: debug port 1 -ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported +ACPI: Thermal Zone [TZ5] (50 C) e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. -SCSI subsystem initialized -ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000 -ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 4 ports detected e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 26 for MSI/MSI-X +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. +SCSI subsystem initialized libata version 3.00 loaded. -ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman -ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO +ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff +ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +ehci_hcd 0000:00:1a.7: setting latency timer to 64 +ehci_hcd 0000:00:1a.7: EHCI Host Controller +ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 +ehci_hcd 0000:00:1a.7: debug port 1 +ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported +ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000 +ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000 -usb 1-2: new high speed USB device using ehci_hcd and address 3 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15 +ata2: port disabled. ignoring. pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled -ata2: port disabled. ignoring. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected -hub 1-2:1.0: USB hub found -hub 1-2:1.0: 4 ports detected ata1.00: ATA-7: SAMSUNG HS122JC, GQ100-04, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA ata1.01: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2 ata1.00: configured for UDMA/100 ata1.01: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS122JC GQ10 PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda3 sda4 < sda5 sda6 sda7 > +sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 -sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 +usb 1-2: new high speed USB device using ehci_hcd and address 3 +hub 1-2:1.0: USB hub found +hub 1-2:1.0: 4 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 -usb 5-2: new full speed USB device using uhci_hcd and address 2 -ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com +ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210] +usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 1-2.2: new full speed USB device using ehci_hcd and address 4 usb 1-2.3: new low speed USB device using ehci_hcd and address 5 usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input1 generic-usb 0003:046D:C50D.0001: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-2.3/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 1-2.4: new low speed USB device using ehci_hcd and address 6 input: USB Compliant Keyboard as /class/input/input2 generic-usb 0003:05A4:9841.0002: input: USB HID v1.10 Keyboard [USB Compliant Keyboard] on usb-0000:00:1a.7-2.4/input0 input: USB Compliant Keyboard as /class/input/input3 generic-usb 0003:05A4:9841.0003: input: USB HID v1.10 Device [USB Compliant Keyboard] on usb-0000:00:1a.7-2.4/input1 PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): mounted filesystem with ordered data mode udevd version 125 started input: Sleep Button as /class/input/input4 ACPI: Sleep Button [C2BF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C155] input: Power Button as /class/input/input6 ACPI: Power Button [PWRF] ACPI: SSDT 000000007e7dbd42 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 000000007e7dc046 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) ACPI: AC Adapter [C23B] (on-line) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle -Switching to clocksource hpet ACPI: SSDT 000000007e7dbc7a 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 000000007e7dbfc1 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) +Switching to clocksource hpet agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory +agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ACPI: Battery Slot [C23D] (battery present) ACPI: WMI: Mapper loaded -agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 lis3lv02d: hardware type NC2510 found. lis3lv02d: 12 bits sensor found -tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) input: ST LIS3LV02DL Accelerometer as /class/input/input7 Registered led device: hp::hddprotect lis3lv02d driver loaded. +tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) input: PC Speaker as /class/input/input8 +usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3102 +usbcore: registered new interface driver usblp +input: PS/2 Generic Mouse as /class/input/input9 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: 00 (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) cfg80211: Calling CRDA to update world regulatory domain cfg80211: Calling CRDA for country: EU yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c9] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 18 yenta_cardbus 0000:02:06.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff -usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3102 -usbcore: registered new interface driver usblp -input: HP WMI hotkeys as /class/input/input9 +input: HP WMI hotkeys as /class/input/input10 +Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 +input: SynPS/2 Synaptics TouchPad as /class/input/input11 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.34-bisect-kd iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:10:00.0: setting latency timer to 64 iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels iwlagn 0000:10:00.0: irq 27 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' -input: PS/2 Generic Mouse as /class/input/input10 HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 -input: HDA Digital PCBeep as /class/input/input11 -Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 -input: SynPS/2 Synaptics TouchPad as /class/input/input12 +input: HDA Digital PCBeep as /class/input/input12 EXT3-fs (dm-1): using internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3-fs (dm-5): using internal journal EXT3-fs (dm-5): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-3): using internal journal EXT3-fs (dm-3): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-4): using internal journal EXT3-fs (dm-4): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-6): using internal journal EXT3-fs (dm-6): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-9): using internal journal EXT3-fs (dm-9): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-12): using internal journal EXT3-fs (dm-12): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-8): using internal journal EXT3-fs (dm-8): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-10): using internal journal EXT3-fs (dm-10): mounted filesystem with ordered data mode Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 across:2097144k iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:10:00.0: loaded firmware version 228.57.2.23 wlan0: direct probe to AP 00:14:c1:38:e5:15 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:14:c1:38:e5:15 (try 1) wlan0: authenticated wlan0: associate with AP 00:14:c1:38:e5:15 (try 1) wlan0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1) wlan0: associated RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found ppdev: user-space parallel port driver wlan0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 29 for MSI/MSI-X acpi device:00: registered as cooling_device9 input: Video Bus as /class/input/input13 ACPI: Video Device [C09A] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 --Boundary-00=_9ZEzLEmRLWYbOlg-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/