Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 26 Apr 2002 15:08:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 26 Apr 2002 15:08:18 -0400 Received: from mailout09.sul.t-online.com ([194.25.134.84]:27785 "EHLO mailout09.sul.t-online.com") by vger.kernel.org with ESMTP id ; Fri, 26 Apr 2002 15:08:18 -0400 To: linux-kernel@vger.kernel.org Cc: stephan@maciej.muc.de Subject: Re: [BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot) In-Reply-To: <200204251757.07947.stephan@maciej.muc.de> From: Andi Kleen X-No-Archive: yes Date: 26 Apr 2002 21:08:13 +0200 Message-ID: Lines: 18 User-Agent: Gnus/5.070095 (Pterodactyl Gnus v0.95) Emacs/20.7 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Stephan Maciej writes: > later > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 > ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio > hda: HITACHI_DK23CA-20, ATA DISK drive > hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive > > That's the last line I see from a 2.5.10 kernel booting up. 2.5.9 does go > farther: I have a similar problem on the VirtuHammer simulator. On trying to access the virtual disk using PIO mode the simular breaks with an error in a rep ; outsb loop complaining about "writing data while in data in phase". I guess your problem could be the same, as the DVD is likely accessed using PIO. 2.5.10 fails, 2.5.9 works. -Andi - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/