Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752559Ab0DZTzU (ORCPT ); Mon, 26 Apr 2010 15:55:20 -0400 Received: from mail1-out1.atlantis.sk ([80.94.52.55]:48273 "EHLO mail.atlantis.sk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750849Ab0DZTzS (ORCPT ); Mon, 26 Apr 2010 15:55:18 -0400 From: Ondrej Zary To: Alan Stern Subject: Re: [linux-pm] Invalid opcode on resume from STR on Asus P4P800-VM Date: Mon, 26 Apr 2010 21:55:05 +0200 User-Agent: KMail/1.9.10 Cc: linux-pm@lists.linux-foundation.org, linux-kernel@vger.kernel.org References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201004262155.06949.linux@rainbow-software.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2509 Lines: 54 On Monday 26 April 2010 21:17:27 Alan Stern wrote: > On Mon, 26 Apr 2010, Ondrej Zary wrote: > > Hello, > > I'm trying to debug oops on resume from suspend-to-RAM on Asus P4P800-VM > > mainboard. It crashes with invalid opcode (see below). The kernel is > > 2.6.32-trunk from Debian but the same problem is present with vanilla > > kernels - both newer and older (but screen remains blank most of the > > time, only keyboard LEDs blink indicating an oops). > > > > What can cause this problem? > > > > 8.000339 invalid opcode: 0000 [#1] SMP > > 8.003529 last sysfs file: /sys/power/state > > 8.004265 Modules linked in: sco bridge stp bnep l2cacp crc16 > > bluetooth rfkill loop i2c_i801 snd_intel8x0 snd_ac97_codec shpchp > > ac97_bus parport_pc parport > > rng_core pci_hotplug snd_pcsp snd_pcm snd_timer snd soundcore psmouse > > snd_page_alloc serio_raw evdev processor ext3 jbd mbcache ide_gd_mod > > ata_generic libata scsi_mod > > ide_pci_generic i915 drm_kms_helper uhci_hcd drm i2c_algo_bit piix > > i2c_core ehci_hcd intel_agp e100 video ide_core mii floppy agpgart output > > usbcore nls_base button > > thermal fan thermal_sys [last unloaded: scsi_wait_scan] > > [ 148.004265] > > [ 148.004265] Pid: 0, comm: swapper Not tainted (2.6.32-trunk-686 #1) To > > Be Filled By O.E.M. [ 148.004265] EIP: 0060:[] EFLAGS: > > 00010086 CPU: 0 > > [ 148.004265] EIP is at mwait_idle+0x4e/0x6c > > I had exactly the same problem (on an HP computer with an Intel > chipset). As far as anyone could figure out, it is caused by a bug in > the BIOS. It's not entirely clear that this is the complete answer, > but nothing else turned up. See > > http://bugzilla.kernel.org/show_bug.cgi?id=15385 > > for the complete record. The best solution I could find was to boot > with "idle=halt" on the command line. You might check to see if any > BIOS updates are available. Thanks, it does not crash with "idle=halt" or "idle=poll". According to this: http://siyobik.info/index.php?module=x86&id=215 the MWAIT instruction can be enabled/disabled in IA32_MISC_ENABLES MSR. Kernel probably should enable it at boot and also on resume. Here's some more info: http://software.intel.com/en-us/forums/showthread.php?t=63654 -- Ondrej Zary -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/