Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933148Ab0FBULL (ORCPT ); Wed, 2 Jun 2010 16:11:11 -0400 Received: from mail.perches.com ([173.55.12.10]:2581 "EHLO mail.perches.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758531Ab0FBULI (ORCPT ); Wed, 2 Jun 2010 16:11:08 -0400 Subject: [PATCH] drivers/staging/batman-adv: Use (pr|netdev)_ macro helpers From: Joe Perches To: Marek Lindner , Simon Wunderlich , Andrew Lunn , Greg Kroah-Hartman Cc: devel , linux-kernel@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.net In-Reply-To: <1275498615.23599.12.camel@Joe-Laptop.home> References: <1275498615.23599.12.camel@Joe-Laptop.home> Content-Type: text/plain; charset="UTF-8" Date: Wed, 02 Jun 2010 13:11:06 -0700 Message-ID: <1275509466.23599.43.camel@Joe-Laptop.home> Mime-Version: 1.0 X-Mailer: Evolution 2.28.3 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23175 Lines: 675 Compile tested only Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove "batman-adv:" from format strings Use pr_ Use netdev_ Signed-off-by: Joe Perches --- drivers/staging/batman-adv/aggregation.c | 2 + drivers/staging/batman-adv/bat_sysfs.c | 53 ++++++++++++----------- drivers/staging/batman-adv/bitarray.c | 2 + drivers/staging/batman-adv/device.c | 19 ++++---- drivers/staging/batman-adv/hard-interface.c | 31 +++++-------- drivers/staging/batman-adv/main.c | 17 +++---- drivers/staging/batman-adv/main.h | 18 ++++---- drivers/staging/batman-adv/originator.c | 17 +++---- drivers/staging/batman-adv/routing.c | 14 +++---- drivers/staging/batman-adv/send.c | 11 ++--- drivers/staging/batman-adv/translation-table.c | 8 ++-- drivers/staging/batman-adv/vis.c | 11 +++-- 12 files changed, 98 insertions(+), 105 deletions(-) diff --git a/drivers/staging/batman-adv/aggregation.c b/drivers/staging/batman-adv/aggregation.c index ce8b8a6..66ee09e 100644 --- a/drivers/staging/batman-adv/aggregation.c +++ b/drivers/staging/batman-adv/aggregation.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "aggregation.h" #include "send.h" diff --git a/drivers/staging/batman-adv/bat_sysfs.c b/drivers/staging/batman-adv/bat_sysfs.c index e2c000b..5da7b92 100644 --- a/drivers/staging/batman-adv/bat_sysfs.c +++ b/drivers/staging/batman-adv/bat_sysfs.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "bat_sysfs.h" #include "translation-table.h" @@ -99,18 +101,19 @@ static ssize_t store_aggr_ogm(struct kobject *kobj, struct attribute *attr, if (buff[count - 1] == '\n') buff[count - 1] = '\0'; - printk(KERN_INFO "batman-adv:Invalid parameter for 'aggregate OGM' setting on mesh %s received: %s\n", - net_dev->name, buff); + netdev_info(net_dev, + "Invalid parameter for 'aggregate OGM' setting on mesh received: %s\n", + buff); return -EINVAL; } if (atomic_read(&bat_priv->aggregation_enabled) == aggr_tmp) return count; - printk(KERN_INFO "batman-adv:Changing aggregation from: %s to: %s on mesh: %s\n", - atomic_read(&bat_priv->aggregation_enabled) == 1 ? - "enabled" : "disabled", aggr_tmp == 1 ? "enabled" : "disabled", - net_dev->name); + netdev_info(net_dev, "Changing aggregation from: %s to: %s on mesh\n", + atomic_read(&bat_priv->aggregation_enabled) == 1 ? + "enabled" : "disabled", + aggr_tmp == 1 ? "enabled" : "disabled"); atomic_set(&bat_priv->aggregation_enabled, (unsigned)aggr_tmp); return count; @@ -152,18 +155,18 @@ static ssize_t store_vis_mode(struct kobject *kobj, struct attribute *attr, if (buff[count - 1] == '\n') buff[count - 1] = '\0'; - printk(KERN_INFO "batman-adv:Invalid parameter for 'vis mode' setting on mesh %s received: %s\n", - net_dev->name, buff); + netdev_info(net_dev, "Invalid parameter for 'vis mode' setting on mesh received: %s\n", + buff); return -EINVAL; } if (atomic_read(&bat_priv->vis_mode) == vis_mode_tmp) return count; - printk(KERN_INFO "batman-adv:Changing vis mode from: %s to: %s on mesh: %s\n", - atomic_read(&bat_priv->vis_mode) == VIS_TYPE_CLIENT_UPDATE ? - "client" : "server", vis_mode_tmp == VIS_TYPE_CLIENT_UPDATE ? - "client" : "server", net_dev->name); + netdev_info(net_dev, "Changing vis mode from: %s to: %s on mesh\n", + atomic_read(&bat_priv->vis_mode) == VIS_TYPE_CLIENT_UPDATE ? + "client" : "server", + vis_mode_tmp == VIS_TYPE_CLIENT_UPDATE ? "client" : "server"); atomic_set(&bat_priv->vis_mode, (unsigned)vis_mode_tmp); return count; @@ -190,23 +193,23 @@ static ssize_t store_orig_interval(struct kobject *kobj, struct attribute *attr, ret = strict_strtoul(buff, 10, &orig_interval_tmp); if (ret) { - printk(KERN_INFO "batman-adv:Invalid parameter for 'orig_interval' setting on mesh %s received: %s\n", - net_dev->name, buff); + netdev_info(net_dev, "Invalid parameter for 'orig_interval' setting on mesh received: %s\n", + buff); return -EINVAL; } if (orig_interval_tmp <= JITTER * 2) { - printk(KERN_INFO "batman-adv:New originator interval too small: %li (min: %i)\n", - orig_interval_tmp, JITTER * 2); + netdev_info(net_dev, "New originator interval too small: %li (min: %i)\n", + orig_interval_tmp, JITTER * 2); return -EINVAL; } if (atomic_read(&bat_priv->orig_interval) == orig_interval_tmp) return count; - printk(KERN_INFO "batman-adv:Changing originator interval from: %i to: %li on mesh: %s\n", - atomic_read(&bat_priv->orig_interval), - orig_interval_tmp, net_dev->name); + netdev_info(net_dev, "Changing originator interval from: %i to: %li on mesh\n", + atomic_read(&bat_priv->orig_interval), + orig_interval_tmp); atomic_set(&bat_priv->orig_interval, orig_interval_tmp); return count; @@ -297,7 +300,7 @@ int sysfs_add_meshif(struct net_device *dev) bat_priv->mesh_obj = kobject_create_and_add(SYSFS_IF_MESH_SUBDIR, batif_kobject); if (!bat_priv->mesh_obj) { - printk(KERN_ERR "batman-adv:Can't add sysfs directory: %s/%s\n", + pr_err("Can't add sysfs directory: %s/%s\n", dev->name, SYSFS_IF_MESH_SUBDIR); goto out; } @@ -306,7 +309,7 @@ int sysfs_add_meshif(struct net_device *dev) err = sysfs_create_file(bat_priv->mesh_obj, &((*bat_attr)->attr)); if (err) { - printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n", + pr_err("Can't add sysfs file: %s/%s/%s\n", dev->name, SYSFS_IF_MESH_SUBDIR, ((*bat_attr)->attr).name); goto rem_attr; @@ -316,7 +319,7 @@ int sysfs_add_meshif(struct net_device *dev) for (bin_attr = mesh_bin_attrs; *bin_attr; ++bin_attr) { err = sysfs_create_bin_file(bat_priv->mesh_obj, (*bin_attr)); if (err) { - printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n", + pr_err("Can't add sysfs file: %s/%s/%s\n", dev->name, SYSFS_IF_MESH_SUBDIR, ((*bin_attr)->attr).name); goto rem_bin_attr; @@ -390,7 +393,7 @@ static ssize_t store_mesh_iface(struct kobject *kobj, struct attribute *attr, if (buff[count - 1] == '\n') buff[count - 1] = '\0'; - printk(KERN_ERR "batman-adv:Invalid parameter for 'mesh_iface' setting received: %s\n", + pr_err("Invalid parameter for 'mesh_iface' setting received: %s\n", buff); return -EINVAL; } @@ -453,7 +456,7 @@ int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev) hardif_kobject); if (!*hardif_obj) { - printk(KERN_ERR "batman-adv:Can't add sysfs directory: %s/%s\n", + pr_err("Can't add sysfs directory: %s/%s\n", dev->name, SYSFS_IF_BAT_SUBDIR); goto out; } @@ -461,7 +464,7 @@ int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev) for (hardif_attr = batman_attrs; *hardif_attr; ++hardif_attr) { err = sysfs_create_file(*hardif_obj, &((*hardif_attr)->attr)); if (err) { - printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n", + pr_err("Can't add sysfs file: %s/%s/%s\n", dev->name, SYSFS_IF_BAT_SUBDIR, ((*hardif_attr)->attr).name); goto rem_attr; diff --git a/drivers/staging/batman-adv/bitarray.c b/drivers/staging/batman-adv/bitarray.c index 2fef6e3..d493625 100644 --- a/drivers/staging/batman-adv/bitarray.c +++ b/drivers/staging/batman-adv/bitarray.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "bitarray.h" diff --git a/drivers/staging/batman-adv/device.c b/drivers/staging/batman-adv/device.c index 7eb6559..d4c4e7d 100644 --- a/drivers/staging/batman-adv/device.c +++ b/drivers/staging/batman-adv/device.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include "main.h" @@ -57,17 +59,15 @@ int bat_device_setup(void) /* register our device - kernel assigns a free major number */ tmp_major = register_chrdev(0, DRIVER_DEVICE, &fops); if (tmp_major < 0) { - printk(KERN_ERR "batman-adv:" - "Registering the character device failed with %d\n", - tmp_major); + pr_err("Registering the character device failed with %d\n", + tmp_major); return 0; } batman_class = class_create(THIS_MODULE, "batman-adv"); if (IS_ERR(batman_class)) { - printk(KERN_ERR "batman-adv:" - "Could not register class 'batman-adv'\n"); + pr_err("Could not register class 'batman-adv'\n"); return 0; } @@ -110,8 +110,7 @@ int bat_device_open(struct inode *inode, struct file *file) } if (i == ARRAY_SIZE(device_client_hash)) { - printk(KERN_ERR "batman-adv:" - "Error - can't add another packet client: " + pr_err("Error - can't add another packet client: " "maximum number of clients reached\n"); kfree(device_client); return -EXFULL; @@ -213,7 +212,7 @@ ssize_t bat_device_write(struct file *file, const char __user *buff, unsigned long flags; if (len < sizeof(struct icmp_packet)) { - bat_dbg(DBG_BATMAN, "batman-adv:" + bat_dbg(DBG_BATMAN, "Error - can't send packet from char device: " "invalid packet size\n"); return -EINVAL; @@ -226,14 +225,14 @@ ssize_t bat_device_write(struct file *file, const char __user *buff, return -EFAULT; if (icmp_packet.packet_type != BAT_ICMP) { - bat_dbg(DBG_BATMAN, "batman-adv:" + bat_dbg(DBG_BATMAN, "Error - can't send packet from char device: " "got bogus packet type (expected: BAT_ICMP)\n"); return -EINVAL; } if (icmp_packet.msg_type != ECHO_REQUEST) { - bat_dbg(DBG_BATMAN, "batman-adv:" + bat_dbg(DBG_BATMAN, "Error - can't send packet from char device: " "got bogus message type (expected: ECHO_REQUEST)\n"); return -EINVAL; diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c index 7a582e8..1c6cdd7 100644 --- a/drivers/staging/batman-adv/hard-interface.c +++ b/drivers/staging/batman-adv/hard-interface.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "hard-interface.h" #include "soft-interface.h" @@ -149,12 +151,9 @@ static void check_known_mac_addr(uint8_t *addr) if (!compare_orig(batman_if->net_dev->dev_addr, addr)) continue; - printk(KERN_WARNING "batman-adv:" - "The newly added mac address (%pM) already exists on: %s\n", - addr, batman_if->dev); - printk(KERN_WARNING "batman-adv:" - "It is strongly recommended to keep mac addresses unique" - "to avoid problems!\n"); + pr_warning("The newly added mac address (%pM) already exists on: %s\n", + addr, batman_if->dev); + pr_warning("It is strongly recommended to keep mac addresses unique to avoid problems!\n"); } rcu_read_unlock(); } @@ -206,8 +205,7 @@ static void hardif_activate_interface(struct bat_priv *bat_priv, if (!bat_priv->primary_if) set_primary_if(bat_priv, batman_if); - printk(KERN_INFO "batman-adv:Interface activated: %s\n", - batman_if->dev); + pr_info("Interface activated: %s\n", batman_if->dev); if (atomic_read(&module_state) == MODULE_INACTIVE) activate_module(); @@ -226,8 +224,7 @@ static void hardif_deactivate_interface(struct batman_if *batman_if) batman_if->if_status = IF_INACTIVE; - printk(KERN_INFO "batman-adv:Interface deactivated: %s\n", - batman_if->dev); + pr_info("Interface deactivated: %s\n", batman_if->dev); update_min_mtu(); } @@ -245,8 +242,7 @@ int hardif_enable_interface(struct batman_if *batman_if) batman_if->packet_buff = kmalloc(batman_if->packet_len, GFP_ATOMIC); if (!batman_if->packet_buff) { - printk(KERN_ERR "batman-adv:" - "Can't add interface packet (%s): out of memory\n", + pr_err("Can't add interface packet (%s): out of memory\n", batman_if->dev); goto err; } @@ -265,14 +261,12 @@ int hardif_enable_interface(struct batman_if *batman_if) orig_hash_add_if(batman_if, bat_priv->num_ifaces); atomic_set(&batman_if->seqno, 1); - printk(KERN_INFO "batman-adv:Adding interface: %s\n", batman_if->dev); + pr_info("Adding interface: %s\n", batman_if->dev); if (hardif_is_iface_up(batman_if)) hardif_activate_interface(bat_priv, batman_if); else - printk(KERN_ERR "batman-adv:" - "Not using interface %s " - "(retrying later): interface not active\n", + pr_err("Not using interface %s (retrying later): interface not active\n", batman_if->dev); /* begin scheduling originator messages on that interface */ @@ -296,7 +290,7 @@ void hardif_disable_interface(struct batman_if *batman_if) if (batman_if->if_status != IF_INACTIVE) return; - printk(KERN_INFO "batman-adv:Removing interface: %s\n", batman_if->dev); + pr_info("Removing interface: %s\n", batman_if->dev); bat_priv->num_ifaces--; orig_hash_del_if(batman_if, bat_priv->num_ifaces); @@ -323,8 +317,7 @@ static struct batman_if *hardif_add_interface(struct net_device *net_dev) batman_if = kmalloc(sizeof(struct batman_if), GFP_ATOMIC); if (!batman_if) { - printk(KERN_ERR "batman-adv:" - "Can't add interface (%s): out of memory\n", + pr_err("Can't add interface (%s): out of memory\n", net_dev->name); goto out; } diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c index 72851cd..46682c0 100644 --- a/drivers/staging/batman-adv/main.c +++ b/drivers/staging/batman-adv/main.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "bat_sysfs.h" #include "routing.h" @@ -99,16 +101,14 @@ int init_module(void) interface_setup); if (!soft_device) { - printk(KERN_ERR "batman-adv:" - "Unable to allocate the batman interface\n"); + pr_err("Unable to allocate the batman interface\n"); goto end; } retval = register_netdev(soft_device); if (retval < 0) { - printk(KERN_ERR "batman-adv:" - "Unable to register the batman interface: %i\n", retval); + pr_err("Unable to register the batman interface: %i\n", retval); goto free_soft_device; } @@ -120,9 +120,8 @@ int init_module(void) register_netdevice_notifier(&hard_if_notifier); dev_add_pack(&batman_adv_packet_type); - printk(KERN_INFO "batman-adv:" - "B.A.T.M.A.N. advanced %s%s (compatibility version %i) loaded\n", - SOURCE_VERSION, REVISION_VERSION_STR, COMPAT_VERSION); + pr_info("B.A.T.M.A.N. advanced %s%s (compatibility version %i) loaded\n", + SOURCE_VERSION, REVISION_VERSION_STR, COMPAT_VERSION); return 0; @@ -182,9 +181,7 @@ void activate_module(void) goto end; err: - printk(KERN_ERR "batman-adv:" - "Unable to allocate memory for mesh information structures: " - "out of mem ?\n"); + pr_err("Unable to allocate memory for mesh information structures: out of mem ?\n"); deactivate_module(); end: return; diff --git a/drivers/staging/batman-adv/main.h b/drivers/staging/batman-adv/main.h index 5f8343d..afc322d 100644 --- a/drivers/staging/batman-adv/main.h +++ b/drivers/staging/batman-adv/main.h @@ -85,15 +85,17 @@ extern int debug; extern int bat_debug_type(int type); -#define bat_dbg(type, fmt, arg...) do { \ - if (bat_debug_type(type)) \ - printk(KERN_DEBUG "batman-adv:" fmt, ## arg); \ - } \ - while (0) +#define bat_dbg(type, fmt, arg...) \ +do { \ + if (bat_debug_type(type)) \ + printk(KERN_DEBUG pr_fmt(fmt), ##arg); \ +} while (0) #else /* !CONFIG_BATMAN_ADV_DEBUG */ -#define bat_dbg(type, fmt, arg...) do { \ - } \ - while (0) +#define bat_dbg(type, fmt, arg...) \ +do { \ + if (0) \ + printk(KERN_DEBUG pr_fmt(fmt), ##arg); \ +} while (0) #endif /* diff --git a/drivers/staging/batman-adv/originator.c b/drivers/staging/batman-adv/originator.c index 568aef8..1a61887 100644 --- a/drivers/staging/batman-adv/originator.c +++ b/drivers/staging/batman-adv/originator.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* increase the reference counter for this originator */ #include "main.h" @@ -163,8 +165,7 @@ struct orig_node *get_orig_node(uint8_t *addr) swaphash = hash_resize(orig_hash, orig_hash->size * 2); if (swaphash == NULL) - printk(KERN_ERR - "batman-adv:Couldn't resize orig hash table\n"); + pr_err("Couldn't resize orig hash table\n"); else orig_hash = swaphash; } @@ -373,8 +374,7 @@ static int orig_node_add_if(struct orig_node *orig_node, int max_if_num) data_ptr = kmalloc(max_if_num * sizeof(TYPE_OF_WORD) * NUM_WORDS, GFP_ATOMIC); if (!data_ptr) { - printk(KERN_ERR - "batman-adv:Can't resize orig: out of memory\n"); + pr_err("Can't resize orig: out of memory\n"); return -1; } @@ -385,8 +385,7 @@ static int orig_node_add_if(struct orig_node *orig_node, int max_if_num) data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC); if (!data_ptr) { - printk(KERN_ERR - "batman-adv:Can't resize orig: out of memory\n"); + pr_err("Can't resize orig: out of memory\n"); return -1; } @@ -435,8 +434,7 @@ static int orig_node_del_if(struct orig_node *orig_node, chunk_size = sizeof(TYPE_OF_WORD) * NUM_WORDS; data_ptr = kmalloc(max_if_num * chunk_size, GFP_ATOMIC); if (!data_ptr) { - printk(KERN_ERR - "batman-adv:Can't resize orig: out of memory\n"); + pr_err("Can't resize orig: out of memory\n"); return -1; } @@ -457,8 +455,7 @@ free_bcast_own: data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC); if (!data_ptr) { - printk(KERN_ERR - "batman-adv:Can't resize orig: out of memory\n"); + pr_err("Can't resize orig: out of memory\n"); return -1; } diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c index 066dc8b..b04ddcb 100644 --- a/drivers/staging/batman-adv/routing.c +++ b/drivers/staging/batman-adv/routing.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "routing.h" #include "send.h" @@ -731,10 +733,8 @@ static int recv_icmp_ttl_exceeded(struct sk_buff *skb) /* send TTL exceeded if packet is an echo request (traceroute) */ if (icmp_packet->msg_type != ECHO_REQUEST) { - printk(KERN_WARNING "batman-adv:" - "Warning - can't forward icmp packet from %pM to %pM: " - "ttl exceeded\n", - icmp_packet->orig, icmp_packet->dst); + pr_warning("Warning - can't forward icmp packet from %pM to %pM: ttl exceeded\n", + icmp_packet->orig, icmp_packet->dst); return NET_RX_DROP; } @@ -899,10 +899,8 @@ int recv_unicast_packet(struct sk_buff *skb) /* TTL exceeded */ if (unicast_packet->ttl < 2) { - printk(KERN_WARNING "batman-adv:Warning - " - "can't forward unicast packet from %pM to %pM: " - "ttl exceeded\n", - ethhdr->h_source, unicast_packet->dest); + pr_warning("Warning - can't forward unicast packet from %pM to %pM: ttl exceeded\n", + ethhdr->h_source, unicast_packet->dest); return NET_RX_DROP; } diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index ac69ed8..f5d6b69 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "send.h" #include "routing.h" @@ -64,10 +66,8 @@ int send_skb_packet(struct sk_buff *skb, goto send_skb_err; if (!(batman_if->net_dev->flags & IFF_UP)) { - printk(KERN_WARNING - "batman-adv:Interface %s " - "is not up - can't send packet via that interface!\n", - batman_if->dev); + pr_warning("Interface %s is not up - can't send packet via that interface!\n", + batman_if->dev); goto send_skb_err; } @@ -179,8 +179,7 @@ static void send_packet(struct forw_packet *forw_packet) unsigned char directlink = (batman_packet->flags & DIRECTLINK ? 1 : 0); if (!forw_packet->if_incoming) { - printk(KERN_ERR "batman-adv: Error - can't forward packet: " - "incoming iface not specified\n"); + pr_err("Error - can't forward packet: incoming iface not specified\n"); return; } diff --git a/drivers/staging/batman-adv/translation-table.c b/drivers/staging/batman-adv/translation-table.c index 63d0967..a41bedd 100644 --- a/drivers/staging/batman-adv/translation-table.c +++ b/drivers/staging/batman-adv/translation-table.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "translation-table.h" #include "soft-interface.h" @@ -111,8 +113,7 @@ void hna_local_add(uint8_t *addr) hna_local_hash->size * 2); if (swaphash == NULL) - printk(KERN_ERR "batman-adv:" - "Couldn't resize local hna hash table\n"); + pr_err("Couldn't resize local hna hash table\n"); else hna_local_hash = swaphash; } @@ -364,8 +365,7 @@ void hna_global_add_orig(struct orig_node *orig_node, hna_global_hash->size * 2); if (swaphash == NULL) - printk(KERN_ERR "batman-adv:" - "Couldn't resize global hna hash table\n"); + pr_err("Couldn't resize global hna hash table\n"); else hna_global_hash = swaphash; } diff --git a/drivers/staging/batman-adv/vis.c b/drivers/staging/batman-adv/vis.c index 1d3d954..380e996 100644 --- a/drivers/staging/batman-adv/vis.c +++ b/drivers/staging/batman-adv/vis.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "main.h" #include "send.h" #include "translation-table.h" @@ -628,7 +630,7 @@ static void send_vis_packet(struct vis_info *info) int packet_length; if (info->packet.ttl < 2) { - printk(KERN_WARNING "batman-adv: Error - can't send vis packet: ttl exceeded\n"); + pr_warning("Error - can't send vis packet: ttl exceeded\n"); return; } @@ -690,13 +692,13 @@ int vis_init(void) vis_hash = hash_new(256, vis_info_cmp, vis_info_choose); if (!vis_hash) { - printk(KERN_ERR "batman-adv:Can't initialize vis_hash\n"); + pr_err("Can't initialize vis_hash\n"); goto err; } my_vis_info = kmalloc(1000, GFP_ATOMIC); if (!my_vis_info) { - printk(KERN_ERR "batman-adv:Can't initialize vis packet\n"); + pr_err("Can't initialize vis packet\n"); goto err; } @@ -717,8 +719,7 @@ int vis_init(void) memcpy(my_vis_info->packet.sender_orig, mainIfAddr, ETH_ALEN); if (hash_add(vis_hash, my_vis_info) < 0) { - printk(KERN_ERR - "batman-adv:Can't add own vis packet into hash\n"); + pr_err("Can't add own vis packet into hash\n"); /* not in hash, need to remove it manually. */ kref_put(&my_vis_info->refcount, free_info); goto err; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/