Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756192Ab0FSO6i (ORCPT ); Sat, 19 Jun 2010 10:58:38 -0400 Received: from blue-ld-261.synserver.de ([217.119.54.83]:33249 "EHLO smtp-out-036.synserver.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756142Ab0FSO6g (ORCPT ); Sat, 19 Jun 2010 10:58:36 -0400 X-Greylist: delayed 402 seconds by postgrey-1.27 at vger.kernel.org; Sat, 19 Jun 2010 10:58:36 EDT X-SynServer-TrustedSrc: 1 X-SynServer-AuthUser: lars@laprican.de X-SynServer-PPID: 17533 From: 1276924111-11158-27-git-send-email-lars@metafoo.de To: Ralf Baechle Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Lars-Peter Clausen , Mark Brown , Liam Girdwood , alsa-devel@alsa-project.org Subject: [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver Date: Sat, 19 Jun 2010 16:51:22 +0200 Message-Id: <1276959082-9184-1-git-send-email-1276924111-11158-27-git-send-email-lars@metafoo.de> X-Mailer: git-send-email 1.5.6.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6668 Lines: 235 From: Lars-Peter Clausen This patch adds ASoC support for the qi_lb60 board. Signed-off-by: Lars-Peter Clausen Cc: Mark Brown Cc: Liam Girdwood Cc: alsa-devel@alsa-project.org -- Changes since v1 - Refer to AMP gpios always by their define - Do not try to set codecs format, since the set_fmt callback for the codec was dropped. Changes since v2 - The codec prefix was removed from jz4740 codec include file - This patch accidentally contained a few bits meant for ASoC JZ4740 platform support patch. Removed them. --- sound/soc/jz4740/Kconfig | 9 +++ sound/soc/jz4740/Makefile | 4 + sound/soc/jz4740/qi_lb60.c | 166 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+), 0 deletions(-) create mode 100644 sound/soc/jz4740/qi_lb60.c diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 27480f2..5351cba 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -12,3 +12,12 @@ config SND_JZ4740_SOC_I2S help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 based boards. + +config SND_JZ4740_SOC_QI_LB60 + tristate "SoC Audio support for Qi LB60" + depends on SND_JZ4740_SOC && JZ4740_QI_LB60 + select SND_JZ4740_SOC_I2S + select SND_SOC_JZ4740_CODEC + help + Say Y if you want to add support for ASoC audio on the Qi LB60 board + a.k.a Qi Ben NanoNote. diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile index 1be8d19..be873c1 100644 --- a/sound/soc/jz4740/Makefile +++ b/sound/soc/jz4740/Makefile @@ -7,3 +7,7 @@ snd-soc-jz4740-i2s-objs := jz4740-i2s.o obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o +# Jz4740 Machine Support +snd-soc-qi-lb60-objs := qi_lb60.o + +obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c new file mode 100644 index 0000000..f15f491 --- /dev/null +++ b/sound/soc/jz4740/qi_lb60.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../codecs/jz4740.h" +#include "jz4740-pcm.h" +#include "jz4740-i2s.h" + + +#define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29) +#define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4) + +static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *ctrl, int event) +{ + int on = 0; + if (event & SND_SOC_DAPM_POST_PMU) + on = 1; + else if (event & SND_SOC_DAPM_PRE_PMD) + on = 0; + + gpio_set_value(QI_LB60_SND_GPIO, on); + gpio_set_value(QI_LB60_AMP_GPIO, on); + + return 0; +} + +static const struct snd_soc_dapm_widget qi_lb60_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event), + SND_SOC_DAPM_MIC("Mic", NULL), +}; + +static const struct snd_soc_dapm_route qi_lb60_routes[] = { + {"Mic", NULL, "MIC"}, + {"Speaker", NULL, "LOUT"}, + {"Speaker", NULL, "ROUT"}, +}; + +#define QI_LB60_DAIFMT (SND_SOC_DAIFMT_I2S | \ + SND_SOC_DAIFMT_NB_NF | \ + SND_SOC_DAIFMT_CBM_CFM) + +static int qi_lb60_codec_init(struct snd_soc_codec *codec) +{ + int ret; + struct snd_soc_dai *cpu_dai = codec->socdev->card->dai_link->cpu_dai; + + snd_soc_dapm_nc_pin(codec, "LIN"); + snd_soc_dapm_nc_pin(codec, "RIN"); + + ret = snd_soc_dai_set_fmt(cpu_dai, QI_LB60_DAIFMT); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret); + return ret; + } + + snd_soc_dapm_new_controls(codec, qi_lb60_widgets, ARRAY_SIZE(qi_lb60_widgets)); + snd_soc_dapm_add_routes(codec, qi_lb60_routes, ARRAY_SIZE(qi_lb60_routes)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link qi_lb60_dai = { + .name = "jz4740", + .stream_name = "jz4740", + .cpu_dai = &jz4740_i2s_dai, + .codec_dai = &jz4740_codec_dai, + .init = qi_lb60_codec_init, +}; + +static struct snd_soc_card qi_lb60 = { + .name = "QI LB60", + .dai_link = &qi_lb60_dai, + .num_links = 1, + .platform = &jz4740_soc_platform, +}; + +static struct snd_soc_device qi_lb60_snd_devdata = { + .card = &qi_lb60, + .codec_dev = &soc_codec_dev_jz4740_codec, +}; + +static struct platform_device *qi_lb60_snd_device; + +static int __init qi_lb60_init(void) +{ + int ret; + + qi_lb60_snd_device = platform_device_alloc("soc-audio", -1); + + if (!qi_lb60_snd_device) + return -ENOMEM; + + ret = gpio_request(QI_LB60_SND_GPIO, "SND"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n", + QI_LB60_SND_GPIO, ret); + goto err_device_put; + } + + ret = gpio_request(QI_LB60_AMP_GPIO, "AMP"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n", + QI_LB60_AMP_GPIO, ret); + goto err_gpio_free_snd; + } + + gpio_direction_output(QI_LB60_SND_GPIO, 0); + gpio_direction_output(QI_LB60_AMP_GPIO, 0); + + platform_set_drvdata(qi_lb60_snd_device, &qi_lb60_snd_devdata); + qi_lb60_snd_devdata.dev = &qi_lb60_snd_device->dev; + + ret = platform_device_add(qi_lb60_snd_device); + if (ret) { + pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret); + goto err_unset_pdata; + } + + return 0; + +err_unset_pdata: + platform_set_drvdata(qi_lb60_snd_device, NULL); +/*err_gpio_free_amp:*/ + gpio_free(QI_LB60_AMP_GPIO); +err_gpio_free_snd: + gpio_free(QI_LB60_SND_GPIO); +err_device_put: + platform_device_put(qi_lb60_snd_device); + + return ret; +} +module_init(qi_lb60_init); + +static void __exit qi_lb60_exit(void) +{ + gpio_free(QI_LB60_AMP_GPIO); + gpio_free(QI_LB60_SND_GPIO); + platform_device_unregister(qi_lb60_snd_device); +} +module_exit(qi_lb60_exit); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); +MODULE_LICENSE("GPL v2"); -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/