Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 9 Dec 2000 16:37:27 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 9 Dec 2000 16:37:17 -0500 Received: from ja.ssi.bg ([193.68.177.189]:18436 "EHLO u.domain.uli") by vger.kernel.org with ESMTP id ; Sat, 9 Dec 2000 16:37:08 -0500 Date: Sat, 9 Dec 2000 23:05:28 +0000 (GMT) From: Julian Anastasov To: "Victor J. Orlikowski" cc: linux-kernel Subject: Re: 2.2.18pre25, S3, AMD K6-2, and MTRR.... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, On Sat, 9 Dec 2000, Victor J. Orlikowski wrote: > However, in X I get *random* lock-ups (sometimes when gdm > starts, sometimes when using gmc, etc.) > Disabling MTRR seems to have cured the problem, for now (I > haven't *seen* anything random *yet*; I'll report back if I do.) > I'm using XFree 3.3.6, and the SVGA server. > Ideas? Huh, the same problem, lockups with K6-2 500MHz but with another S3 card. I have changed only the CPU from K6-2 266 (overclocked to 300, running stable for more than 2 years) with a K6-2 500MHz model 8 stepping 12. The change occured in 2.2.18pre19 but I tried with different kernels: 2.2.18pre19 - plain, no MTRR support 2.2.17 - plain, no MTRR support 2.2.18pre22 - with 2.2.18pre21aa2 and ide patches, with MTRR support 2.4.0-test11 - plain, with MTRR support When MTRR support is compiled in, I don't put any settings in /proc/mtrr Sometimes the lockups are forever (I don't wait them for more than 15mins => power off) or for 3-5 seconds, mouse stops, vmstat shows 100% user CPU busy in these 3-5 seconds, 17 blocks written: 2 0 0 0 46664 8024 71316 0 0 0 0 607 919 39 3 58 2 0 0 0 46660 8028 71316 0 0 0 0 565 146 99 1 0 procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 3 0 0 0 46660 8028 71316 0 0 0 17 475 131 100 0 0 ^^^ 2 0 0 0 46660 8028 71316 0 0 0 0 375 134 100 0 0 3 0 0 0 46656 8032 71316 0 0 0 0 327 136 99 1 0 2 0 0 0 46652 8032 71316 0 0 0 0 102 902 89 1 10 2 0 0 0 46656 8032 71316 0 0 0 0 227 590 9 1 90 1 0 0 0 46652 8032 71316 0 0 0 19 224 1181 16 4 80 The CPU is cold. The problems occur when there is no big CPU/disk activity. It can work without problems even when I make bzImage or running benchmark software (nbench). Tested on XFree 3.3.5 and 3.3.6: the same lockups. The lockups can occur when I switch the virtual destktops from the KDE panel, when working with the pine program or when starting new console terminal on the same desktop. No problems in text consoles, only in KDE 1.1.2 and 2.0. Two times I saw something strange: the video image was zoomed and showed twice in the upper half of the screen. No lockups but switching to/from text consoles solves the problem. Tested with Windows 95/98, works on the same hardware with no problems!!! The hardware: Video S3 GX2 4MB AGP, Motherboard: Shuttle 591P Via MVP3, BIOS image 591pwiqf, 192MB RAM Bus 1, device 0, function 0: VGA compatible controller: S3 Inc. ViRGE/GX2 (rev 6). Medium devsel. IRQ 10. Master Capable. Latency=64. Min Gnt=4.Max Lat=255. Non-prefetchable 32 bit memory at 0xd0000000 [0xd0000000]. So, is this a S3 problem with many different cards or this is a K6-2 stepping 12 problem, kernel K6 support or XFree problem? Regards -- Julian Anastasov - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/