Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755802Ab0FXXH0 (ORCPT ); Thu, 24 Jun 2010 19:07:26 -0400 Received: from imr1.ericy.com ([198.24.6.9]:47750 "EHLO imr1.ericy.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754752Ab0FXXHZ (ORCPT ); Thu, 24 Jun 2010 19:07:25 -0400 Date: Thu, 24 Jun 2010 16:05:59 -0700 From: Guenter Roeck To: Randy Dunlap , Jean Delvare , Andrew Morton , "Ira W. Snyder" , Hans de Goede , Mark Brown , Samuel Ortiz , Jonathan Cameron CC: "lm-sensors@lm-sensors.org" , "linux-kernel@vger.kernel.org" , "linux-doc@vger.kernel.org" Subject: Re: [PATCH v3 1/4] hwmon: Driver for SMM665 Six-Channel Active DC Output Controller/Monitor Message-ID: <20100624230559.GA25629@ericsson.com> References: <1277416861-32494-1-git-send-email-guenter.roeck@ericsson.com> <1277416861-32494-2-git-send-email-guenter.roeck@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <1277416861-32494-2-git-send-email-guenter.roeck@ericsson.com> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30381 Lines: 816 Couple of comments inline. On Thu, Jun 24, 2010 at 06:00:58PM -0400, Guenter Roeck wrote: > This driver adds support for the monitoring features of the Summit > Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor. > > Signed-off-by: Guenter Roeck > --- > drivers/hwmon/Kconfig | 15 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/smm665.c | 744 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 760 insertions(+), 0 deletions(-) > create mode 100644 drivers/hwmon/smm665.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index e19cf8e..c45c17e 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -739,6 +739,21 @@ config SENSORS_SIS5595 > This driver can also be built as a module. If so, the module > will be called sis5595. > > +config SENSORS_SMM665 > + tristate "Summit Microelectronics SMM665" > + depends on I2C && EXPERIMENTAL > + default n > + help > + If you say yes here you get support for the hardware monitoring > + features of the Summit Microelectronics SMM665/SMM665B Six-Channel > + Active DC Output Controller / Monitor. > + > + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. > + Support for those chips is untested. > + > + This driver can also be built as a module. If so, the module will > + be called smm665. > + > config SENSORS_DME1737 > tristate "SMSC DME1737, SCH311x and compatibles" > depends on I2C && EXPERIMENTAL > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 2138ceb..55b0940 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o > obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o > obj-$(CONFIG_SENSORS_SHT15) += sht15.o > obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o > +obj-$(CONFIG_SENSORS_SMM665) += smm665.o > obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o > obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o > obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o > diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c > new file mode 100644 > index 0000000..d340f61 > --- /dev/null > +++ b/drivers/hwmon/smm665.c > @@ -0,0 +1,744 @@ > +/* > + * Driver for SMM665 Power Controller / Monitor > + * > + * Copyright (C) 2010 Ericsson AB. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; version 2 of the License. > + * > + * This driver should also work for SMM465, SMM764, and SMM766, but is untested > + * for those chips. Only monitoring functionality is implemented. > + * > + * Datasheets: > + * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf > + * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* Internal reference voltage (VREF, x 1000 */ > +#define SMM665_VREF_ADC_X1000 1250 > + > +/* module parameters */ > +static int vref = SMM665_VREF_ADC_X1000; > +module_param(vref, int, 0); > +MODULE_PARM_DESC(vref, "Reference voltage in mV"); > + > +enum chips { smm465, smm665, smm665c, smm764, smm766 }; > + > +/* > + * ADC channel addresses > + */ > +#define SMM665_MISC16_ADC_DATA_A 0x00 > +#define SMM665_MISC16_ADC_DATA_B 0x01 > +#define SMM665_MISC16_ADC_DATA_C 0x02 > +#define SMM665_MISC16_ADC_DATA_D 0x03 > +#define SMM665_MISC16_ADC_DATA_E 0x04 > +#define SMM665_MISC16_ADC_DATA_F 0x05 > +#define SMM665_MISC16_ADC_DATA_VDD 0x06 > +#define SMM665_MISC16_ADC_DATA_12V 0x07 > +#define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08 > +#define SMM665_MISC16_ADC_DATA_AIN1 0x09 > +#define SMM665_MISC16_ADC_DATA_AIN2 0x0a > + > +/* > + * Command registers > + */ > +#define SMM665_MISC8_CMD_STS 0x80 > +#define SMM665_MISC8_STATUS1 0x81 > +#define SMM665_MISC8_STATUSS2 0x82 > +#define SMM665_MISC8_IO_POLARITY 0x83 > +#define SMM665_MISC8_PUP_POLARITY 0x84 > +#define SMM665_MISC8_ADOC_STATUS1 0x85 > +#define SMM665_MISC8_ADOC_STATUS2 0x86 > +#define SMM665_MISC8_WRITE_PROT 0x87 > +#define SMM665_MISC8_STS_TRACK 0x88 > + > +/* > + * Configuration registers and register groups > + */ > +#define SMM665_ADOC_ENABLE 0x0d > +#define SMM665_LIMIT_BASE 0x80 /* First limit register */ > + > +/* > + * Limit register bit masks > + */ > +#define SMM665_TRIGGER_RST 0x8000 > +#define SMM665_TRIGGER_HEALTHY 0x4000 > +#define SMM665_TRIGGER_POWEROFF 0x2000 > +#define SMM665_TRIGGER_SHUTDOWN 0x1000 > +#define SMM665_ADC_MASK 0x03ff > + > +#define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \ > + | SMM665_TRIGGER_POWEROFF \ > + | SMM665_TRIGGER_SHUTDOWN)) > +/* > + * Fault register bit definitions > + * Values are merged from status registers 1/2, > + * with status register 1 providing the upper 8 bits. > + */ > +#define SMM665_FAULT_A 0x0001 > +#define SMM665_FAULT_B 0x0002 > +#define SMM665_FAULT_C 0x0004 > +#define SMM665_FAULT_D 0x0008 > +#define SMM665_FAULT_E 0x0010 > +#define SMM665_FAULT_F 0x0020 > +#define SMM665_FAULT_VDD 0x0040 > +#define SMM665_FAULT_12V 0x0080 > +#define SMM665_FAULT_TEMP 0x0100 > +#define SMM665_FAULT_AIN1 0x0200 > +#define SMM665_FAULT_AIN2 0x0400 > + > +/* > + * I2C Register addresses > + * > + * The configuration register needs to be the configured base register. > + * The command/status register address is derived from it. > + */ > +#define SMM665_REGMASK 0x78 > +#define SMM665_CMDREG_BASE 0x48 > +#define SMM665_CONFREG_BASE 0x50 > + > +/* > + * Equations given by chip manufacturer to calculate voltage/temperature values > + * vref = Reference voltage on VREF_ADC pin (module parameter) > + * adc = 10bit ADC value read back from registers > + */ > + > +/* Voltage A-F and VDD */ > +#define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256) > + > +/* Voltage 12VIN */ > +#define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256) > + > +/* Voltage AIN1, AIN2 */ > +#define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512) > + > +/* Temp Sensor */ > +#define SMM665_TEMP_ADC_TO_CELSIUS(adc) ((adc) <= 511) ? \ > + ((int)(adc) * 1000 / 4) : \ > + (((int)(adc) - 0x400) * 1000 / 4) > + > +#define SMM665_NUM_ADC 11 > + > +/* > + * Chip dependent ADC conversion time, in uS > + */ > +#define SMM665_ADC_WAIT_SMM665 70 > +#define SMM665_ADC_WAIT_SMM766 185 > + > +struct smm665_data { > + enum chips type; > + int conversion_time; /* ADC conversion time */ > + struct device *hwmon_dev; > + struct mutex update_lock; > + bool valid; > + unsigned long last_updated; /* in jiffies */ > + u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */ > + u16 faults; /* fault status */ > + /* The following values are in mV */ > + int critical_min_limit[SMM665_NUM_ADC]; > + int alarm_min_limit[SMM665_NUM_ADC]; > + int critical_max_limit[SMM665_NUM_ADC]; > + int alarm_max_limit[SMM665_NUM_ADC]; > + struct i2c_client *cmdreg; > +}; > + > +/* > + * smm665_read16() > + * > + * Read 16 bit value from , . Upper 8 bits are in . > + */ > +static int smm665_read16(struct i2c_client *client, int reg) > +{ > + int rv, val; > + > + rv = i2c_smbus_read_byte_data(client, reg); > + if (rv < 0) > + return rv; > + val = rv << 8; > + rv = i2c_smbus_read_byte_data(client, reg + 1); > + if (rv < 0) > + return rv; > + val |= rv; > + return val; > +} > + > +/* > + * Read adc value. > + */ > +static int smm665_read_adc(struct smm665_data *data, int adc) > +{ > + struct i2c_client *client = data->cmdreg; > + int rv; > + int radc; > + > + /* > + * Algorithm for reading ADC, per SMM665 datasheet > + * > + * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]} > + * [wait conversion time] > + * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]} > + * > + * To implement the first part of this exchange, > + * do a full read transaction and expect a failure/Nack. > + * This sets up the address pointer on the SMM665 > + * and starts the ADC conversion. > + * Then do a two-byte read transaction. > + */ > + rv = i2c_smbus_read_byte_data(client, adc << 3); > + if (rv != -ENXIO) { > + /* > + * We expect ENXIO to reflect NACK > + * (per Documentation/i2c/fault-codes). > + * Everything else is an error. > + */ > + dev_dbg(&client->dev, > + "Unexpected return code %d when setting ADC index", rv); > + return (rv < 0) ? rv : -EIO; > + } > + > + udelay(data->conversion_time); > + > + /* > + * Now read two bytes. > + * > + * Neither i2c_smbus_read_byte() nor > + * i2c_smbus_read_block_data() worked here, > + * so use i2c_smbus_read_word_data() instead. > + * We could also try to use i2c_master_recv(), > + * but that is not always supported. > + */ > + rv = i2c_smbus_read_word_data(client, 0); > + if (rv < 0) { > + dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv); > + return -1; > + } > + /* > + * Validate/verify readback adc channel (in bit 11..14). > + * High byte is in lower 8 bit of rv, so only shift by 3. > + */ > + radc = (rv >> 3) & 0x0f; > + if (radc != adc) { > + dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d", > + adc, radc); > + return -EIO; > + } > + /* > + * Chip replies with H/L, while SMBus expects L/H. > + * Thus, byte order is reversed, and we have to swap > + * the result. > + */ > + rv = swab16(rv) & SMM665_ADC_MASK; > + > + return rv; > +} > + > +static struct smm665_data *smm665_update_device(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct smm665_data *data = i2c_get_clientdata(client); > + > + mutex_lock(&data->update_lock); > + > + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { > + int i, val; > + > + /* > + * read status registers > + */ > + val = smm665_read16(client, SMM665_MISC8_STATUS1); > + if (unlikely(val < 0)) > + return ERR_PTR(val); unlock() missing. Will be fixed in v4. > + data->faults = val; > + > + /* Read adc registers */ > + for (i = 0; i < SMM665_NUM_ADC; i++) { > + val = smm665_read_adc(data, i); > + if (unlikely(val < 0)) > + return ERR_PTR(val); unlock() missing. Will be fixed in v4. > + data->adc[i] = val; > + } > + data->last_updated = jiffies; > + data->valid = 1; > + } > + > + mutex_unlock(&data->update_lock); > + > + return data; > +} > + > +/* Return converted value from given adc */ > +static int smm665_convert(u16 adcval, int index) > +{ > + int val = 0; > + > + switch (index) { > + case SMM665_MISC16_ADC_DATA_12V: > + val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); > + break; > + > + case SMM665_MISC16_ADC_DATA_VDD: > + case SMM665_MISC16_ADC_DATA_A: > + case SMM665_MISC16_ADC_DATA_B: > + case SMM665_MISC16_ADC_DATA_C: > + case SMM665_MISC16_ADC_DATA_D: > + case SMM665_MISC16_ADC_DATA_E: > + case SMM665_MISC16_ADC_DATA_F: > + val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); > + break; > + > + case SMM665_MISC16_ADC_DATA_AIN1: > + case SMM665_MISC16_ADC_DATA_AIN2: > + val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); > + break; > + > + case SMM665_MISC16_ADC_DATA_INT_TEMP: > + val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK); > + break; > + > + default: > + /* If we get here, the developer messed up */ > + WARN_ON_ONCE(1); > + break; > + } > + > + return val; > +} > + > +static int smm665_get_min(struct device *dev, int index) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct smm665_data *data = i2c_get_clientdata(client); > + > + return data->alarm_min_limit[index]; > +} > + > +static int smm665_get_max(struct device *dev, int index) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct smm665_data *data = i2c_get_clientdata(client); > + > + return data->alarm_max_limit[index]; > +} > + > +static int smm665_get_lcrit(struct device *dev, int index) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct smm665_data *data = i2c_get_clientdata(client); > + > + return data->critical_min_limit[index]; > +} > + > +static int smm665_get_crit(struct device *dev, int index) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct smm665_data *data = i2c_get_clientdata(client); > + > + return data->critical_max_limit[index]; > +} > + > +static ssize_t smm665_show_fault(struct device *dev, > + struct device_attribute *da, char *buf) > +{ > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); > + struct smm665_data *data = smm665_update_device(dev); > + int val = 0; > + > + if (IS_ERR(data)) > + return PTR_ERR(data); > + > + if (data->faults & (1 << attr->index)) > + val = 1; > + > + return snprintf(buf, PAGE_SIZE, "%d\n", val); > +} > + > +static ssize_t smm665_show_input(struct device *dev, > + struct device_attribute *da, char *buf) > +{ > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); > + struct smm665_data *data = smm665_update_device(dev); > + int adc = attr->index; > + int val; > + > + if (IS_ERR(data)) > + return PTR_ERR(data); > + > + val = smm665_convert(data->adc[adc], adc); > + return snprintf(buf, PAGE_SIZE, "%d\n", val); > +} > + > +#define SMM665_SHOW(what) \ > + static ssize_t smm665_show_##what(struct device *dev, \ > + struct device_attribute *da, char *buf) \ > +{ \ > + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ > + const int val = smm665_get_##what(dev, attr->index); \ > + return snprintf(buf, PAGE_SIZE, "%d\n", val); \ > +} > + > +SMM665_SHOW(min); > +SMM665_SHOW(max); > +SMM665_SHOW(lcrit); > +SMM665_SHOW(crit); > + > +/* These macros are used below in constructing device attribute objects > + * for use with sysfs_create_group() to make a sysfs device file > + * for each register. > + */ > + > +#define SMM665_ATTR(name, type, cmd_idx) \ > + static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \ > + smm665_show_##type, NULL, cmd_idx) > + > +/* Construct a sensor_device_attribute structure for each register */ > + > +/* Input voltages */ > +SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V); > +SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD); > +SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A); > +SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B); > +SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C); > +SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D); > +SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E); > +SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F); > +SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1); > +SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2); > + > +/* Input voltages min */ > +SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V); > +SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD); > +SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A); > +SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B); > +SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C); > +SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D); > +SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E); > +SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F); > +SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1); > +SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2); > + > +/* Input voltages max */ > +SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V); > +SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD); > +SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A); > +SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B); > +SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C); > +SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D); > +SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E); > +SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F); > +SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1); > +SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2); > + > +/* Input voltages lcrit */ > +SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V); > +SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD); > +SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A); > +SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B); > +SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C); > +SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D); > +SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E); > +SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F); > +SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1); > +SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2); > + > +/* Input voltages crit */ > +SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V); > +SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD); > +SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A); > +SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B); > +SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C); > +SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D); > +SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E); > +SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F); > +SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1); > +SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2); > + > +/* Faults */ > +SMM665_ATTR(in1, fault, SMM665_FAULT_12V); > +SMM665_ATTR(in2, fault, SMM665_FAULT_VDD); > +SMM665_ATTR(in3, fault, SMM665_FAULT_A); > +SMM665_ATTR(in4, fault, SMM665_FAULT_B); > +SMM665_ATTR(in5, fault, SMM665_FAULT_C); > +SMM665_ATTR(in6, fault, SMM665_FAULT_D); > +SMM665_ATTR(in7, fault, SMM665_FAULT_E); > +SMM665_ATTR(in8, fault, SMM665_FAULT_F); > +SMM665_ATTR(in9, fault, SMM665_FAULT_AIN1); > +SMM665_ATTR(in10, fault, SMM665_FAULT_AIN2); > + > +/* Temperature */ > +SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP); > +SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP); > +SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP); > +SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP); > +SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP); > +SMM665_ATTR(temp1, fault, SMM665_FAULT_TEMP); > + > +/* > + * Finally, construct an array of pointers to members of the above objects, > + * as required for sysfs_create_group() > + */ > +static struct attribute *smm665_attributes[] = { > + &sensor_dev_attr_in1_input.dev_attr.attr, > + &sensor_dev_attr_in1_min.dev_attr.attr, > + &sensor_dev_attr_in1_max.dev_attr.attr, > + &sensor_dev_attr_in1_lcrit.dev_attr.attr, > + &sensor_dev_attr_in1_crit.dev_attr.attr, > + &sensor_dev_attr_in1_fault.dev_attr.attr, > + > + &sensor_dev_attr_in2_input.dev_attr.attr, > + &sensor_dev_attr_in2_min.dev_attr.attr, > + &sensor_dev_attr_in2_max.dev_attr.attr, > + &sensor_dev_attr_in2_lcrit.dev_attr.attr, > + &sensor_dev_attr_in2_crit.dev_attr.attr, > + &sensor_dev_attr_in2_fault.dev_attr.attr, > + > + &sensor_dev_attr_in3_input.dev_attr.attr, > + &sensor_dev_attr_in3_min.dev_attr.attr, > + &sensor_dev_attr_in3_max.dev_attr.attr, > + &sensor_dev_attr_in3_lcrit.dev_attr.attr, > + &sensor_dev_attr_in3_crit.dev_attr.attr, > + &sensor_dev_attr_in3_fault.dev_attr.attr, > + > + &sensor_dev_attr_in4_input.dev_attr.attr, > + &sensor_dev_attr_in4_min.dev_attr.attr, > + &sensor_dev_attr_in4_max.dev_attr.attr, > + &sensor_dev_attr_in4_lcrit.dev_attr.attr, > + &sensor_dev_attr_in4_crit.dev_attr.attr, > + &sensor_dev_attr_in4_fault.dev_attr.attr, > + > + &sensor_dev_attr_in5_input.dev_attr.attr, > + &sensor_dev_attr_in5_min.dev_attr.attr, > + &sensor_dev_attr_in5_max.dev_attr.attr, > + &sensor_dev_attr_in5_lcrit.dev_attr.attr, > + &sensor_dev_attr_in5_crit.dev_attr.attr, > + &sensor_dev_attr_in5_fault.dev_attr.attr, > + > + &sensor_dev_attr_in6_input.dev_attr.attr, > + &sensor_dev_attr_in6_min.dev_attr.attr, > + &sensor_dev_attr_in6_max.dev_attr.attr, > + &sensor_dev_attr_in6_lcrit.dev_attr.attr, > + &sensor_dev_attr_in6_crit.dev_attr.attr, > + &sensor_dev_attr_in6_fault.dev_attr.attr, > + > + &sensor_dev_attr_in7_input.dev_attr.attr, > + &sensor_dev_attr_in7_min.dev_attr.attr, > + &sensor_dev_attr_in7_max.dev_attr.attr, > + &sensor_dev_attr_in7_lcrit.dev_attr.attr, > + &sensor_dev_attr_in7_crit.dev_attr.attr, > + &sensor_dev_attr_in7_fault.dev_attr.attr, > + > + &sensor_dev_attr_in8_input.dev_attr.attr, > + &sensor_dev_attr_in8_min.dev_attr.attr, > + &sensor_dev_attr_in8_max.dev_attr.attr, > + &sensor_dev_attr_in8_lcrit.dev_attr.attr, > + &sensor_dev_attr_in8_crit.dev_attr.attr, > + &sensor_dev_attr_in8_fault.dev_attr.attr, > + > + &sensor_dev_attr_in9_input.dev_attr.attr, > + &sensor_dev_attr_in9_min.dev_attr.attr, > + &sensor_dev_attr_in9_max.dev_attr.attr, > + &sensor_dev_attr_in9_lcrit.dev_attr.attr, > + &sensor_dev_attr_in9_crit.dev_attr.attr, > + &sensor_dev_attr_in9_fault.dev_attr.attr, > + > + &sensor_dev_attr_in10_input.dev_attr.attr, > + &sensor_dev_attr_in10_min.dev_attr.attr, > + &sensor_dev_attr_in10_max.dev_attr.attr, > + &sensor_dev_attr_in10_lcrit.dev_attr.attr, > + &sensor_dev_attr_in10_crit.dev_attr.attr, > + &sensor_dev_attr_in10_fault.dev_attr.attr, > + > + &sensor_dev_attr_temp1_input.dev_attr.attr, > + &sensor_dev_attr_temp1_min.dev_attr.attr, > + &sensor_dev_attr_temp1_max.dev_attr.attr, > + &sensor_dev_attr_temp1_lcrit.dev_attr.attr, > + &sensor_dev_attr_temp1_crit.dev_attr.attr, > + &sensor_dev_attr_temp1_fault.dev_attr.attr, > + > + NULL, > +}; > + > +static const struct attribute_group smm665_group = { > + .attrs = smm665_attributes, > +}; > + > +static int smm665_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct i2c_adapter *adapter = client->adapter; > + struct smm665_data *data; > + int i, ret; > + > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA > + | I2C_FUNC_SMBUS_WORD_DATA)) > + return -ENODEV; > + > + if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0) > + return -ENODEV; > + > + ret = -ENOMEM; > + data = kzalloc(sizeof(*data), GFP_KERNEL); > + if (!data) > + goto out_return; > + > + i2c_set_clientdata(client, data); > + mutex_init(&data->update_lock); > + > + data->type = id->driver_data; > + data->cmdreg = i2c_new_dummy(adapter, (client->addr & ~SMM665_REGMASK) > + | SMM665_CMDREG_BASE); > + if (!data->cmdreg) > + goto out_kfree; > + > + switch (data->type) { > + case smm465: > + case smm665: > + data->conversion_time = SMM665_ADC_WAIT_SMM665; > + break; > + case smm665c: > + case smm764: > + case smm766: > + data->conversion_time = SMM665_ADC_WAIT_SMM766; > + break; > + } > + > + ret = -ENODEV; > + if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0) > + goto out_unregister; > + > + /* > + * Read limits. > + * > + * Limit registers start with register SMM665_LIMIT_BASE. > + * Each channel uses 8 registers, providing four limit values > + * per channel. Each limit value requires two registers, with the > + * high byte in the first register and the low byte in the second > + * register. The first two limits are under limit values, followed > + * by two over limit values. > + * > + * Limit register order matches the ADC register order, so we use > + * ADC register defines throughout the code to index limit registers. > + * > + * We save the first retrieved value both as "critical" and "alarm" > + * value. The second value overwrites either the critical or the > + * alarm value, depending on its configuration. This ensures that both > + * critical and alarm values are initialized, even if both registers are > + * configured as critical or non-critical. > + * > + * Note: Critical values for voltage channels are saved, even though > + * this information is currently not used by the driver. This is mostly > + * for consistency, though it might eventually be useful if future APIs > + * support reporting "critical" voltage values. > + */ > + for (i = 0; i < SMM665_NUM_ADC; i++) { > + int val; > + > + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8); > + if (unlikely(val < 0)) > + goto out_unregister; > + data->critical_min_limit[i] = data->alarm_min_limit[i] > + = smm665_convert(val, i); > + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2); > + if (unlikely(val < 0)) > + goto out_unregister; > + if (smm665_is_critical(val)) > + data->critical_min_limit[i] = smm665_convert(val, i); > + else > + data->alarm_min_limit[i] = smm665_convert(val, i); > + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4); > + if (unlikely(val < 0)) > + goto out_unregister; > + data->critical_max_limit[i] = data->alarm_max_limit[i] > + = smm665_convert(val, i); > + val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6); > + if (unlikely(val < 0)) > + goto out_unregister; > + if (smm665_is_critical(val)) > + data->critical_max_limit[i] = smm665_convert(val, i); > + else > + data->alarm_max_limit[i] = smm665_convert(val, i); > + } > + > + /* Register sysfs hooks */ > + ret = sysfs_create_group(&client->dev.kobj, &smm665_group); > + if (ret) > + goto out_unregister; > + > + data->hwmon_dev = hwmon_device_register(&client->dev); > + if (IS_ERR(data->hwmon_dev)) { > + ret = PTR_ERR(data->hwmon_dev); > + goto out_remove_group; > + } > + > + return 0; > + > +out_remove_group: > + sysfs_remove_group(&client->dev.kobj, &smm665_group); > +out_unregister: > + i2c_unregister_device(data->cmdreg); > +out_kfree: > + kfree(data); > +out_return: > + return ret; > +} > + > +static int smm665_remove(struct i2c_client *client) > +{ > + struct smm665_data *data = i2c_get_clientdata(client); > + > + i2c_unregister_device(data->cmdreg); > + hwmon_device_unregister(data->hwmon_dev); > + sysfs_remove_group(&client->dev.kobj, &smm665_group); > + > + kfree(data); > + > + return 0; > +} > + > +static const struct i2c_device_id smm665_id[] = { > + {"smm465", smm465}, > + {"smm665", smm665}, > + {"smm665c", smm665c}, > + {"smm764", smm764}, > + {"smm766", smm766}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, smm665_id); > + > +/* This is the driver that will be inserted */ > +static struct i2c_driver smm665_driver = { > + .driver = { > + .name = "smm665", > + }, > + .probe = smm665_probe, > + .remove = smm665_remove, > + .id_table = smm665_id, > +}; > + > +static int __init smm665_init(void) > +{ > + return i2c_add_driver(&smm665_driver); > +} > + > +static void __exit smm665_exit(void) > +{ > + i2c_del_driver(&smm665_driver); > +} > + > +MODULE_AUTHOR("Guenter Roeck"); > +MODULE_DESCRIPTION("SMM665 driver"); > +MODULE_LICENSE("GPL"); > + > +module_init(smm665_init); > +module_exit(smm665_exit); > -- > 1.7.0.87.g0901d > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/