Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932129Ab0FYOmL (ORCPT ); Fri, 25 Jun 2010 10:42:11 -0400 Received: from imr3.ericy.com ([198.24.6.13]:57271 "EHLO imr3.ericy.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756184Ab0FYOmI (ORCPT ); Fri, 25 Jun 2010 10:42:08 -0400 From: Guenter Roeck To: Jean Delvare , Hans de Goede , Mark Brown , Andrew Morton , Samuel Ortiz , Jonathan Cameron CC: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org, Guenter Roeck Subject: [PATCH v4 0/3] hwmon: Driver for SMM665 Six-Channel Active DC Output Controller/Monitor Date: Fri, 25 Jun 2010 07:40:29 -0700 Message-ID: <1277476832-28480-1-git-send-email-guenter.roeck@ericsson.com> X-Mailer: git-send-email 1.7.0.87.g0901d MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1859 Lines: 41 This patchset adds support for the monitoring features of the Summit Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor. ------ v2 changes: - Added (untested) support for SMM465, SMM764, and SMM766. - Added vref module parameter to support non-default values of VREF_ADC. - Added an explanation describing what the chip does with _min and _max limit values. - Removed alarm sysfs files (since the chip does not report alarm status in a register, alarm detection was implemented by comparing limits with ADC readings, which can as well be done in userland). - Replaced register enums with defines. - Made limit variable names better readable. - Removed retries from smm665_read_adc(). - Check error reply from i2c_smbus_read_byte_data() and only accept ENXIO when expecting NACK. - Explained reason for byte swap after reading ADC registers in some more detail. - Added debug messages to display the error reason when reading ADC registers failed. v3 changes: - Return error codes from smm665_read_adc(). - Abort after first error in smm665_update_device() and return error code. - Return ADC read errors to user. - Added inX_lcrit and inX_crit attributes for min/max critical voltages. - Added tempX_lcrit attribute for critical low temperature. - Updated sysfs-interface to document support for new attributes. v4 changes: - Added missing unlock in error handling of smm665_update_device(). - Fixed minor style issue in MAINTAINERS - Removed update to sysfs-interface from patchset since it has already been applied. - Added lcrit and crit attributes to driver documentation. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/