Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932224Ab0FYSBG (ORCPT ); Fri, 25 Jun 2010 14:01:06 -0400 Received: from fep18.mx.upcmail.net ([62.179.121.38]:33449 "EHLO fep18.mx.upcmail.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753124Ab0FYSBB (ORCPT ); Fri, 25 Jun 2010 14:01:01 -0400 X-SourceIP: 77.57.188.152 Message-ID: <4C24EED2.4020300@odi.ch> Date: Fri, 25 Jun 2010 20:00:50 +0200 From: =?ISO-8859-1?Q?Ortwin_Gl=FCck?= User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.4) Gecko/20100608 Thunderbird/3.1 MIME-Version: 1.0 To: Tejun Heo CC: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Subject: Re: ata link not reset properly References: <4C223F8A.9030306@odi.ch> <4C224429.6010705@kernel.org> <4C224502.2040206@kernel.org> <4C2305A8.4070708@odi.ch> <4C24C903.1070705@kernel.org> In-Reply-To: <4C24C903.1070705@kernel.org> X-Enigmail-Version: 1.1.1 Content-Type: multipart/mixed; boundary="------------060206010001020708030708" X-Cloudmark-Analysis: v=1.1 cv=K3uBg944YaUT+Qsu6bWO0a0V3uPy4DQNslbdoMCD4tw= c=1 sm=0 a=mI6YO6ZdSLUA:10 a=HrRr-ctSOON7R7BZ2zkA:9 a=mAHUl_L5W6c8nLBhwG0A:7 a=s8fwVIWBnj-gR52q38mgGeusBn0A:4 a=wPNLvfGTeEIA:10 a=20KFwNOVAAAA:8 a=mpL0Cdj5O3gC8B4sBOgA:9 a=fkH3GJj3JwRieStynEIA:7 a=77axS_TqaEAAP90l3hwV5uVv4hUA:4 a=jEp0ucaQiEUA:10 a=Ze6ms1oJD0sKpCZt:21 a=YYrEhmExSVVjGCp4:21 a=HpAAvcLHHh0Zw7uRqdWCyQ==:117 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25748 Lines: 578 This is a multi-part message in MIME format. --------------060206010001020708030708 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit On 25.06.2010 17:19, Tejun Heo wrote: > Patch attached, but please see below. Cheers, I will give it a try and provide feedback if "it" happens again. > Is it PATA? Yes. This chipset doesn't have SATA, only PATA. CONFIG_ATA=y CONFIG_ATA_SFF=y CONFIG_SATA_NV=y CONFIG_PATA_AMD=y > Why do you have 2.01? for the DVD drive? > Can you please attach full boot > log? attached. Thanks. Ortwin --------------060206010001020708030708 Content-Type: text/plain; name="bootlog.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="bootlog.txt" Linux version 2.6.32-gentoo-r7 (root@gollum.odi.ch) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #3 PREEMPT Tue May 11 09:11:24 CEST 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. last_pfn = 0x1fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 0E8000000 mask FFE000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 01c00000 init_memory_mapping: 0000000000000000-000000001fff0000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fff0000 page 4k kernel direct mapping tables up to 1fff0000 @ 7000-c000 ACPI: RSDP 000f6d80 00014 (v00 XPC ) ACPI: RSDT 1fff3000 0002C (v01 XPC AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 1fff3040 00074 (v01 XPC AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 1fff30c0 04137 (v01 XPC SN45 00001000 MSFT 0100000E) ACPI: FACS 1fff0000 00040 ACPI: APIC 1fff7200 0006E (v01 XPC AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 511MB LOWMEM available. mapped low ram: 0 - 1fff0000 low ram: 0 - 1fff0000 node 0 low ram: 00000000 - 1fff0000 node 0 bootmap 00001000 - 00005000 (6 early reservations) ==> bootmem [0000000000 - 001fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001699160] TEXT DATA BSS ==> [0001000000 - 0001699160] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #3 [000169a000 - 00016a109a] BRK ==> [000169a000 - 00016a109a] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x0001fff0 On node 0 totalpages: 130960 free_area_init_node: node 0, pgdat c15e55a0, node_mem_map c16a2000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3968 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125968 pages, LIFO batch:31 Using APIC driver default Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129936 Kernel command line: root=/dev/md1 vga=3840 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Initializing CPU#0 Memory: 512372k/524224k available (4344k kernel code, 11296k reserved, 1727k data, 344k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) vmalloc : 0xe07f0000 - 0xfffa2000 ( 503 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc15ef000 - 0xc1645000 ( 344 kB) .data : 0xc143e2b2 - 0xc15ee074 (1727 kB) .text : 0xc1000000 - 0xc143e2b2 (4344 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1202.776 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2405.55 BogoMIPS (lpj=12027760) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) mce: CPU supports 4 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f CPU: AMD Athlon(tm) processor stepping 04 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb790, last bus=3 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xe9ffffff] pci 0000:00:01.1: reg 10 io port: [0xc000-0xc01f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xef087000-0xef087fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xef082000-0xef082fff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10 32bit mmio: [0xef083000-0xef0830ff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:04.0: reg 10 32bit mmio: [0xef086000-0xef086fff] pci 0000:00:04.0: reg 14 io port: [0xc400-0xc407] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xef000000-0xef07ffff] pci 0000:00:05.0: supports D1 D2 pci 0000:00:06.0: reg 10 io port: [0xb000-0xb0ff] pci 0000:00:06.0: reg 14 io port: [0xb400-0xb47f] pci 0000:00:06.0: reg 18 32bit mmio: [0xef080000-0xef080fff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] pci 0000:00:0d.0: reg 10 32bit mmio: [0xef084000-0xef0847ff] pci 0000:00:0d.0: reg 14 32bit mmio: [0xef085000-0xef08503f] pci 0000:00:0d.0: supports D1 D2 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:01:06.0: reg 10 io port: [0x9000-0x90ff] pci 0000:01:06.0: reg 14 32bit mmio: [0xee000000-0xee0000ff] pci 0000:01:06.0: supports D1 D2 pci 0000:01:06.0: PME# supported from D1 D2 D3hot pci 0000:01:06.0: PME# disabled pci 0000:00:08.0: bridge io port: [0x9000-0x9fff] pci 0000:00:08.0: bridge 32bit mmio: [0xee000000-0xeeffffff] pci 0000:03:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] pci 0000:03:00.0: reg 14 32bit mmio pref: [0xe0000000-0xe7ffffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:00:1e.0: bridge 32bit mmio: [0xec000000-0xedffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: ioport range 0x4000-0x407f has been reserved system 00:00: ioport range 0x4080-0x40ff has been reserved system 00:00: ioport range 0x4400-0x447f has been reserved system 00:00: ioport range 0x4480-0x44ff has been reserved system 00:00: ioport range 0x4200-0x427f has been reserved system 00:00: ioport range 0x4280-0x42ff has been reserved system 00:01: ioport range 0x5000-0x503f has been reserved system 00:01: ioport range 0x5100-0x513f has been reserved system 00:02: iomem range 0xd1800-0xd3fff has been reserved system 00:02: iomem range 0xf0000-0xf7fff could not be reserved system 00:02: iomem range 0xf8000-0xfbfff could not be reserved system 00:02: iomem range 0xfc000-0xfffff could not be reserved system 00:02: iomem range 0x1fff0000-0x1fffffff could not be reserved system 00:02: iomem range 0xffff0000-0xffffffff has been reserved system 00:02: iomem range 0x0-0x9ffff could not be reserved system 00:02: iomem range 0x100000-0x1ffeffff could not be reserved system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x800-0x805 has been reserved system 00:04: ioport range 0x290-0x297 has been reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: 0x9000-0x9fff pci 0000:00:08.0: MEM window: 0xee000000-0xeeffffff pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xec000000-0xedffffff pci 0000:00:1e.0: PREFETCH window: 0xe0000000-0xe7ffffff pci 0000:00:08.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xee000000-0xeeffffff] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xe7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:03:00.0: Boot video device Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Slow work thread pool: Starting up Slow work thread pool: Ready fuse init (API version 7.13) msgmni has been set to 1001 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) lp: driver loaded but no devices found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart: Detected NVIDIA nForce2 chipset agpgart-nvidia 0000:00:00.0: AGP aperture is 32M @ 0xe8000000 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 nvidiafb 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 nvidiafb: Device ID: 10de0110 i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. nvidiafb: Unable to detect display type... ...Using default of CRT nvidiafb: Unable to detect which CRTCNumber... ...Defaulting to CRTCNumber 0 nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON Console: switching to colour frame buffer device 80x30 nvidiafb: PCI nVidia NV11 framebuffer (64MB @ 0xE0000000) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) processor LNXCPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (39 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport0: Printer, Hewlett-Packard HP LaserJet 1100 lp0: using parport0 (interrupt-driven). brd: module loaded loop: module loaded pata_amd 0000:00:09.0: version 0.4.1 pata_amd 0000:00:09.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22 forcedeth 0000:00:04.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ata1.00: ATA-5: MAXTOR 6L020J1, A93.0500, max UDMA/133 ata1.00: 40132503 sectors, multi 16: LBA ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc700c6c0) ACPI=0x7f01f (15:600:0x13) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L020J1 A93. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 40132503 512-byte logical blocks: (20.5 GB/19.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100 ata2.00: 58605120 sectors, multi 16: LBA ata2.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-115 0127, E1.27, max UDMA/33 ata2: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc700c6c0) ACPI=0x3f01f (20:60:0x1f) ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c6c0) ACPI=0x701f (20:60:0x1f) ata2.00: configured for UDMA/100 ata2.01: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 1:0:0:0: Attached scsi generic sg1 type 0 forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:30:1b:b3:da:f5 forcedeth 0000:00:04.0: timirq lnktim desc-v1 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 8139too 0000:01:06.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 eth1: RealTek RTL8139 at 0xe0864000, 00:30:4f:19:09:35, IRQ 18 ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21 ohci1394 0000:00:0d.0: setting latency timer to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ef084000-ef0847ff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20 ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 64 is not supported ehci_hcd 0000:00:02.2: irq 20, io mem 0xef083000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd usb usb1: SerialNumber: 0000:00:02.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xef087000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 21, io mem 0xef082000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 ohci_hcd usb usb3: SerialNumber: 0000:00:02.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. sdb1 sdb2 sdb3 scsi 1:0:1:0: CD-ROM PIONEER DVD-ROM DVD-115F 1.27 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 sr 1:0:1:0: Attached scsi generic sg2 type 5 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram i2c /dev entries driver i2c i2c-3: nForce2 SMBus adapter at 0x5000 i2c i2c-4: nForce2 SMBus adapter at 0x5100 it87: Found IT8712F chip at 0x290, revision 5 ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region SPIO [0x295-0x296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver md: raid1 personality registered for level 1 md: multipath personality registered for level -4 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GACT probability NOT on u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8008 buckets, 32032 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2010-06-23 16:46:12 UTC (1277311572) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: md: kicking non-fresh sdb3 from array! md: unbind md: export_rdev(sdb3) raid1: raid set md1 active with 1 out of 2 mirrors md1: detected capacity change from 0 to 20267008000 md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md: kicking non-fresh sdb1 from array! md: unbind md: export_rdev(sdb1) raid1: raid set md0 active with 1 out of 2 mirrors md0: detected capacity change from 0 to 16318464 md: ... autorun DONE. md1: unknown partition table EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 9:1. Freeing unused kernel memory: 344k freed Write protecting the kernel text: 4348k Write protecting the kernel read-only data: 1428k kjournald starting. Commit interval 5 seconds ohci1394: fw-host0: SelfID received outside of bus reset sequence ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301b301bb3db59] udev: starting version 149 md0: unknown partition table EXT3 FS on md1, internal journal Adding 257032k swap on /dev/sda2. Priority:-1 extents:1 across:257032k Adding 257032k swap on /dev/sdb2. Priority:-2 extents:1 across:257032k eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 eth1: no IPv6 routers present eth0: no IPv6 routers present --------------060206010001020708030708-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/