Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753561Ab0GIV2L (ORCPT ); Fri, 9 Jul 2010 17:28:11 -0400 Received: from mga02.intel.com ([134.134.136.20]:18796 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751607Ab0GIV2G (ORCPT ); Fri, 9 Jul 2010 17:28:06 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.55,175,1278313200"; d="scan'208";a="637084278" Message-ID: <4C379462.1020704@intel.com> Date: Fri, 09 Jul 2010 14:28:02 -0700 From: Dan Williams User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.10) Gecko/20100512 Thunderbird/3.0.5 MIME-Version: 1.0 To: Chris Li CC: David Woodhouse , linux-kernel Subject: Re: BUG in drivers/dma/ioat/dma_v2.c:314 References: <4C2A8879.8010000@intel.com> <4C2AC55E.3040303@intel.com> <1277923422.16256.8.camel@localhost> <4C2B9DAC.1030806@intel.com> <1277928125.18854.0.camel@localhost> <4C2BBACF.3080405@intel.com> <1277965264.18854.16.camel@localhost> <4C2C3B07.7050200@intel.com> <1277968336.4945.3.camel@localhost> <4C2C4319.6090906@intel.com> <1277972137.12558.2.camel@localhost> <4C2CCE67.6070600@intel.com> <1278324973.16975.68.camel@localhost> <1278463901.20082.34.camel@dwillia2-linux> <1278474039.31393.8.camel@localhost> <4C34BDCD.9080607@intel.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 60898 Lines: 1192 On 7/7/2010 2:56 PM, Chris Li wrote: > No problem. Is this what you are expecting? No crash when modprobe ioatdma. Not really, I was expecting the BIOS misconfiguration to be caught... On 7/6/2010 8:40 PM, David Woodhouse wrote: > (I'm still only checking for include_all rather than checking for > !cap_write_drain() because that _really_ ought to work; looking at > Chris' latest dmesg it _is_ being assigned to the catch-all unit.) It doesn't appear to from the dmesg below. I agree, I would prefer to do a topology based check like this rather than cheating with !cap_write_drain(), but it looks like cheating is the reliable option. > ioatdma 0000:00:0f.0: failed to start channel chanerr: 0x10 > ioatdma 0000:00:0f.0: Freeing 1 in use descriptors! > ioatdma 0000:00:0f.0: selftest cannot allocate chan resource > ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed > ioatdma 0000:00:0f.0: can't derive routing for PCI INT A Same as the original result, ioatdma blocked from accessing memory, no report about BIOS borkage. -- Dan > > The full dmesg follows. > > Chris > > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.35-rc3+ () (gcc version 4.4.4 20100503 (Red Hat > 4.4.4-2) (GCC) ) #46 SMP Wed Jul 7 14:17:31 PDT 2010 > Command line: root=UUID=e953c66f-e484-4e5b-8b21-93fe8a024879 ro > nomodeset noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 > KEYBOARDTYPE=pc KEYTABLE=us > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f67e000 (usable) > BIOS-e820: 000000007f67e000 - 000000007f6ec000 (ACPI NVS) > BIOS-e820: 000000007f6ec000 - 000000007f6ed000 (ACPI data) > BIOS-e820: 000000007f6ed000 - 000000007f6f5000 (ACPI NVS) > BIOS-e820: 000000007f6f5000 - 000000007f991000 (ACPI data) > BIOS-e820: 000000007f991000 - 000000007f995000 (reserved) > BIOS-e820: 000000007f995000 - 000000007fc00000 (ACPI data) > BIOS-e820: 000000007fc00000 - 0000000080000000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000280000000 (usable) > NX (Execute Disable) protection: active > DMI 2.4 present. > e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) > e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > No AGP bridge found > last_pfn = 0x280000 max_arch_pfn = 0x400000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-FFFFF uncachable > MTRR variable ranges enabled: > 0 base 0080000000 mask 3F80000000 uncachable > 1 base 007FC00000 mask 3FFFC00000 uncachable > 2 base 0000000000 mask 3000000000 write-back > 3 disabled > 4 disabled > 5 disabled > 6 disabled > 7 disabled > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > original variable MTRRs > reg 0, base: 2GB, range: 2GB, type UC > reg 1, base: 2044MB, range: 4MB, type UC > reg 2, base: 0GB, range: 64GB, type WB > total RAM covered: 63484M > Found optimal setting for mtrr clean up > gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G > New variable MTRRs > reg 0, base: 0GB, range: 2GB, type WB > reg 1, base: 2044MB, range: 4MB, type UC > reg 2, base: 4GB, range: 4GB, type WB > reg 3, base: 8GB, range: 8GB, type WB > reg 4, base: 16GB, range: 16GB, type WB > reg 5, base: 32GB, range: 32GB, type WB > e820 update range: 000000007fc00000 - 0000000100000000 (usable) ==> (reserved) > last_pfn = 0x7f67e max_arch_pfn = 0x400000000 > initial memory mapped : 0 - 20000000 > found SMP MP-table at [ffff8800000fec60] fec60 > init_memory_mapping: 0000000000000000-000000007f67e000 > 0000000000 - 007f600000 page 2M > 007f600000 - 007f67e000 page 4k > kernel direct mapping tables up to 7f67e000 @ 8000-c000 > init_memory_mapping: 0000000100000000-0000000280000000 > 0100000000 - 0280000000 page 2M > kernel direct mapping tables up to 280000000 @ a000-15000 > RAMDISK: 3736a000 - 37ff0000 > ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) > ACPI: XSDT 000000007f7441c0 000F4 (v01 APPLE Apple00 0000006C 01000013) > ACPI: FACP 000000007f740000 000F4 (v04 APPLE Apple00 0000006C Loki 0000005F) > ACPI: DSDT 000000007f737000 049CC (v01 APPLE Apple00 00010001 Loki 0000005F) > ACPI: FACS 000000007f68b000 00040 > ACPI: ECDT 000000007f742000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) > ACPI: HPET 000000007f73f000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) > ACPI: APIC 000000007f73d000 000BC (v02 APPLE Apple00 00000000 Loki 0000005F) > ACPI: MCFG 000000007f73c000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) > ACPI: SSDT 000000007f736000 00146 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) > ACPI: SSDT 000000007f735000 0034B (v01 CPUPST Cpu0Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f734000 00047 (v01 PmRef Cpu1Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f733000 00337 (v01 CPUPST Cpu1Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f732000 00047 (v01 PmRef Cpu2Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f731000 00337 (v01 CPUPST Cpu2Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f730000 00047 (v01 PmRef Cpu3Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f72f000 00337 (v01 CPUPST Cpu3Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f72e000 00047 (v01 PmRef Cpu4Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f72d000 00337 (v01 CPUPST Cpu4Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f72c000 00047 (v01 PmRef Cpu5Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f72b000 00337 (v01 CPUPST Cpu5Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f72a000 00047 (v01 PmRef Cpu6Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f729000 00337 (v01 CPUPST Cpu6Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f728000 00047 (v01 PmRef Cpu7Cst 00003000 INTL 20061109) > ACPI: SSDT 000000007f727000 00337 (v01 CPUPST Cpu7Ist 00000012 INTL 20061109) > ACPI: SSDT 000000007f726000 0003D (v01 PmRef CpuPm 00003000 INTL 20061109) > ACPI: SSDT 000000007f71d000 004BE (v01 PCIRef Pci8844 00001000 INTL 20061109) > ACPI: DMAR 000000007f71a000 00088 (v01 APPLE Apple00 00000001 Loki 0000005F) > ACPI: SSDT 000000007f724000 00892 (v01 SataRe SataPri 00001000 INTL 20061109) > ACPI: SSDT 000000007f723000 005F4 (v01 SataRe SataSec 00001000 INTL 20061109) > ACPI: Local APIC address 0xfee00000 > No NUMA configuration found > Faking a node at 0000000000000000-0000000280000000 > Initmem setup node 0 0000000000000000-0000000280000000 > NODE_DATA [0000000100000000 - 0000000100013fff] > [ffffea0000000000-ffffea0008bfffff] PMD -> > [ffff880100200000-ffff8801071fffff] on node 0 > Zone PFN ranges: > DMA 0x00000001 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00280000 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > 0: 0x00000001 -> 0x0000009f > 0: 0x00000100 -> 0x0007f67e > 0: 0x00100000 -> 0x00280000 > On node 0 totalpages: 2094620 > DMA zone: 56 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3942 pages, LIFO batch:0 > DMA32 zone: 14280 pages used for memmap > DMA32 zone: 503478 pages, LIFO batch:31 > Normal zone: 21504 pages used for memmap > Normal zone: 1551360 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x07] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > SMP: Allowing 8 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 40 > early_res array is doubled to 64 at [7000 - 77ff] > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > PM: Registered nosave memory: 000000007f67e000 - 000000007f6ec000 > PM: Registered nosave memory: 000000007f6ec000 - 000000007f6ed000 > PM: Registered nosave memory: 000000007f6ed000 - 000000007f6f5000 > PM: Registered nosave memory: 000000007f6f5000 - 000000007f991000 > PM: Registered nosave memory: 000000007f991000 - 000000007f995000 > PM: Registered nosave memory: 000000007f995000 - 000000007fc00000 > PM: Registered nosave memory: 000000007fc00000 - 0000000080000000 > PM: Registered nosave memory: 0000000080000000 - 00000000ffe00000 > PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 > Allocating PCI resources starting at 80000000 (gap: 80000000:7fe00000) > Booting paravirtualized kernel on bare hardware > setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 > PERCPU: Embedded 30 pages/cpu @ffff880002200000 s90304 r8192 d24384 u262144 > pcpu-alloc: s90304 r8192 d24384 u262144 alloc=1*2097152 > pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > early_res array is doubled to 128 at [10000 - 10fff] > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058780 > Policy zone: Normal > Kernel command line: root=UUID=e953c66f-e484-4e5b-8b21-93fe8a024879 ro > nomodeset noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 > KEYBOARDTYPE=pc KEYTABLE=us > PID hash table entries: 4096 (order: 3, 32768 bytes) > Checking aperture... > No AGP bridge found > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > Subtract (62 early reservations) > #1 [0001000000 - 0001deed10] TEXT DATA BSS > #2 [003736a000 - 0037ff0000] RAMDISK > #3 [0001def000 - 0001def1f1] BRK > #4 [000009fc00 - 00000fec60] BIOS reserved > #5 [00000fec60 - 00000fec70] MP-table mpf > #6 [00000feea4 - 0000100000] BIOS reserved > #7 [00000fec70 - 00000feea4] MP-table mpc > #8 [0000001000 - 0000003000] TRAMPOLINE > #9 [0000003000 - 0000007000] ACPI WAKEUP > #10 [0000008000 - 000000a000] PGTABLE > #11 [000000a000 - 0000010000] PGTABLE > #12 [0100000000 - 0100014000] NODE_DATA > #13 [0001def200 - 0001df0200] BOOTMEM > #14 [00021f0200 - 00021f0800] BOOTMEM > #15 [0100014000 - 0100015000] BOOTMEM > #16 [0100015000 - 0100016000] BOOTMEM > #17 [0100200000 - 0107200000] MEMMAP 0 > #18 [0001deed40 - 0001deeec0] BOOTMEM > #19 [0001df0200 - 0001e08200] BOOTMEM > #20 [0001e08200 - 0001e20200] BOOTMEM > #21 [0001e21000 - 0001e22000] BOOTMEM > #22 [0001deeec0 - 0001deef01] BOOTMEM > #23 [0001deef40 - 0001deef83] BOOTMEM > #24 [0001e20200 - 0001e20510] BOOTMEM > #25 [0001e20540 - 0001e205a8] BOOTMEM > #26 [0001e205c0 - 0001e20628] BOOTMEM > #27 [0001e20640 - 0001e206a8] BOOTMEM > #28 [0001e206c0 - 0001e20728] BOOTMEM > #29 [0001e20740 - 0001e207a8] BOOTMEM > #30 [0001e207c0 - 0001e20828] BOOTMEM > #31 [0001e20840 - 0001e208a8] BOOTMEM > #32 [0001e208c0 - 0001e20928] BOOTMEM > #33 [0001e20940 - 0001e209a8] BOOTMEM > #34 [0001e209c0 - 0001e20a28] BOOTMEM > #35 [0001e20a40 - 0001e20aa8] BOOTMEM > #36 [0001e20ac0 - 0001e20b28] BOOTMEM > #37 [0001e20b40 - 0001e20ba8] BOOTMEM > #38 [0001deefc0 - 0001deefe0] BOOTMEM > #39 [0001e20bc0 - 0001e20be0] BOOTMEM > #40 [0001e20c00 - 0001e20c8b] BOOTMEM > #41 [0001e20cc0 - 0001e20d4b] BOOTMEM > #42 [0002200000 - 000221e000] BOOTMEM > #43 [0002240000 - 000225e000] BOOTMEM > #44 [0002280000 - 000229e000] BOOTMEM > #45 [00022c0000 - 00022de000] BOOTMEM > #46 [0002300000 - 000231e000] BOOTMEM > #47 [0002340000 - 000235e000] BOOTMEM > #48 [0002380000 - 000239e000] BOOTMEM > #49 [00023c0000 - 00023de000] BOOTMEM > #50 [0001e20d80 - 0001e20d88] BOOTMEM > #51 [0001e20dc0 - 0001e20dc8] BOOTMEM > #52 [0001e20e00 - 0001e20e20] BOOTMEM > #53 [0001e20e40 - 0001e20e80] BOOTMEM > #54 [0001e20e80 - 0001e20fa0] BOOTMEM > #55 [0001e24000 - 0001e24048] BOOTMEM > #56 [0001e24080 - 0001e240c8] BOOTMEM > #57 [0001e24100 - 0001e2c100] BOOTMEM > #58 [00023de000 - 00063de000] BOOTMEM > #59 [0001e2c100 - 0001e4c100] BOOTMEM > #60 [0001e4c100 - 0001e8c100] BOOTMEM > #61 [0000011000 - 0000019000] BOOTMEM > Memory: 8169400k/10485760k available (4310k kernel code, 2107280k > absent, 209080k reserved, 6881k data, 1508k init) > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > Hierarchical RCU implementation. > RCU-based detection of stalled CPUs is disabled. > Verbose stalled-CPUs detection is disabled. > NR_IRQS:16640 nr_irqs:744 > Extended CMOS year: 2000 > Console: colour VGA+ 80x25 > console [tty0] enabled > allocated 83886080 bytes of page_cgroup > please try 'cgroup_disable=memory' option if you don't want memory cgroups > hpet clockevent registered > Fast TSC calibration using PIT > Detected 2793.018 MHz processor. > Calibrating delay loop (skipped), value calculated using timer > frequency.. 5586.03 BogoMIPS (lpj=2793018) > pid_max: default: 32768 minimum: 301 > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 6 MCE banks > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. > ... version: 2 > ... bit width: 40 > ... generic registers: 2 > ... value mask: 000000ffffffffff > ... max period: 000000007fffffff > ... fixed-purpose events: 3 > ... event mask: 0000000700000003 > ACPI: Core revision 20100428 > ftrace: converting mcount calls to 0f 1f 44 00 00 > ftrace: allocating 20113 entries in 79 pages > DMAR: Host address width 38 > DMAR: DRHD base: 0x000000fe710000 flags: 0x0 > IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900000c2f0462 ecap e01 > DMAR: DRHD base: 0x000000fe714000 flags: 0x0 > IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900000c2f0462 ecap e01 > DMAR: DRHD base: 0x000000fe719000 flags: 0x0 > IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900000c2f0462 ecap e01 > DMAR: DRHD base: 0x000000fe718000 flags: 0x1 > IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900000c2f0462 ecap e01 > DMAR: No RMRR found > DMAR: No ATSR found > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Xeon(R) CPU E5462 @ 2.80GHz stepping 06 > Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. > Brought up 8 CPUs > Total of 8 processors activated (44687.76 BogoMIPS). > regulator: core version 0.5 > Time: 14:21:29 Date: 07/07/10 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > PCI: not using MMCONFIG > PCI: Using configuration type 1 for base access > bio: create slab at 0 > ACPI: EC: EC description table is found, configuring boot EC > ACPI: BIOS _OSI(Linux) query ignored > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: BIOS offers _GTS > ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org > ACPI: Using IOAPIC for interrupt routing > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI > motherboard resources > ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 > ACPI: No dock devices found. > PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] > pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] > pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] > pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] > pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfe000000] > pci 0000:00:00.0: PME# supported from D0 D3hot D3cold > pci 0000:00:00.0: PME# disabled > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > pci 0000:00:05.0: PME# disabled > pci 0000:00:09.0: PME# supported from D0 D3hot D3cold > pci 0000:00:09.0: PME# disabled > pci 0000:00:0f.0: reg 10: [mem 0x90b00000-0x90b03fff 64bit] > pci 0000:00:1b.0: reg 10: [mem 0x90b04000-0x90b07fff 64bit] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.3: PME# disabled > pci 0000:00:1d.0: reg 20: [io 0x30a0-0x30bf] > pci 0000:00:1d.1: reg 20: [io 0x3080-0x309f] > pci 0000:00:1d.2: reg 20: [io 0x3060-0x307f] > pci 0000:00:1d.3: reg 20: [io 0x3040-0x305f] > pci 0000:00:1d.7: reg 10: [mem 0x90b08400-0x90b087ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.1: reg 10: [io 0x30e8-0x30ef] > pci 0000:00:1f.1: reg 14: [io 0x30fc-0x30ff] > pci 0000:00:1f.1: reg 18: [io 0x30e0-0x30e7] > pci 0000:00:1f.1: reg 1c: [io 0x30f8-0x30fb] > pci 0000:00:1f.1: reg 20: [io 0x30c0-0x30cf] > pci 0000:00:1f.2: reg 10: [io 0x30d8-0x30df] > pci 0000:00:1f.2: reg 14: [io 0x30f4-0x30f7] > pci 0000:00:1f.2: reg 18: [io 0x30d0-0x30d7] > pci 0000:00:1f.2: reg 1c: [io 0x30f0-0x30f3] > pci 0000:00:1f.2: reg 20: [io 0x3020-0x302f] > pci 0000:00:1f.2: reg 24: [mem 0x90b08000-0x90b083ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:02:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref] > pci 0000:02:00.0: reg 18: [mem 0x90a20000-0x90a2ffff 64bit] > pci 0000:02:00.0: reg 20: [io 0x2000-0x20ff] > pci 0000:02:00.0: reg 30: [mem 0x90a00000-0x90a1ffff pref] > pci 0000:02:00.0: supports D1 D2 > pci 0000:00:05.0: PCI bridge to [bus 02-02] > pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:05.0: bridge window [mem 0x90a00000-0x90afffff] > pci 0000:00:05.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] > pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > pci 0000:03:00.0: PME# disabled > pci 0000:03:00.3: PME# supported from D0 D3hot D3cold > pci 0000:03:00.3: PME# disabled > pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:00:09.0: PCI bridge to [bus 03-08] > pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] > pci 0000:00:09.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:04:00.0: PME# supported from D0 D3hot D3cold > pci 0000:04:00.0: PME# disabled > pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:04:01.0: PME# supported from D0 D3hot D3cold > pci 0000:04:01.0: PME# disabled > pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:04:02.0: PME# supported from D0 D3hot D3cold > pci 0000:04:02.0: PME# disabled > pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:03:00.0: PCI bridge to [bus 04-07] > pci 0000:03:00.0: bridge window [io 0x1000-0x1fff] > pci 0000:03:00.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:04:00.0: PCI bridge to [bus 05-05] > pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:04:01.0: PCI bridge to [bus 06-06] > pci 0000:04:01.0: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:04:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:04:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:07:00.0: reg 10: [mem 0x90820000-0x9083ffff] > pci 0000:07:00.0: reg 14: [mem 0x90400000-0x907fffff] > pci 0000:07:00.0: reg 18: [io 0x1020-0x103f] > pci 0000:07:00.0: PME# supported from D0 D3hot D3cold > pci 0000:07:00.0: PME# disabled > pci 0000:07:00.1: reg 10: [mem 0x90800000-0x9081ffff] > pci 0000:07:00.1: reg 14: [mem 0x90000000-0x903fffff] > pci 0000:07:00.1: reg 18: [io 0x1000-0x101f] > pci 0000:07:00.1: PME# supported from D0 D3hot D3cold > pci 0000:07:00.1: PME# disabled > pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:04:02.0: PCI bridge to [bus 07-07] > pci 0000:04:02.0: bridge window [io 0x1000-0x1fff] > pci 0000:04:02.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:04:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:03:00.3: PCI bridge to [bus 08-08] > pci 0000:03:00.3: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:03:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:03:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:00:1c.0: PCI bridge to [bus 09-09] > pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:00:1c.1: PCI bridge to [bus 0a-0a] > pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:0b:00.0: supports D1 D2 > pci 0000:00:1c.2: PCI bridge to [bus 0b-0c] > pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:00:1c.2: bridge window [mem 0x90900000-0x909fffff] > pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:0c:00.0: reg 10: [mem 0x90904000-0x909047ff] > pci 0000:0c:00.0: reg 14: [mem 0x90900000-0x90903fff] > pci 0000:0c:00.0: supports D1 D2 > pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot > pci 0000:0c:00.0: PME# disabled > pci 0000:0b:00.0: PCI bridge to [bus 0c-0c] > pci 0000:0b:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) > pci 0000:0b:00.0: bridge window [mem 0x90900000-0x909fffff] > pci 0000:0b:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:00:1c.3: PCI bridge to [bus 0d-0d] > pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode) > pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] > (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] > (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfe000000] > (subtractive decode) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.P9P2.P2P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NRP5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NRP1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 9 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 9 *10 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11) > ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 9 10 11) *3 > ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 9 10 11) > ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 9 10 *11) > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 9 *10 11) > vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: pci_cache_line_size set to 64 bytes > reserve RAM buffer: 000000000009fc00 - 000000000009ffff > reserve RAM buffer: 000000007f67e000 - 000000007fffffff > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > HPET: 3 timers in total, 0 timers will be used for per-cpu timer > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 comparators, 64-bit 14.318180 MHz counter > Switching to clocksource tsc > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 10 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: [mem 0xe0000000-0xefffffff] has been reserved > system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved > system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved > system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved > system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved > system 00:01: [mem 0xfe700000-0xfe7003ff] has been reserved > system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved > system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved > system 00:08: [io 0x0320-0x037f] has been reserved > system 00:08: [io 0x0400-0x047f] has been reserved > system 00:08: [io 0x0500-0x053f] has been reserved > system 00:08: [io 0x0872-0x0875] has been reserved > pci 0000:00:1c.0: BAR 14: assigned [mem 0x90c00000-0x90dfffff] > pci 0000:00:1c.0: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref] > pci 0000:00:1c.1: BAR 14: assigned [mem 0x91000000-0x911fffff] > pci 0000:00:1c.1: BAR 15: assigned [mem 0x91200000-0x913fffff 64bit pref] > pci 0000:00:1c.2: BAR 15: assigned [mem 0x91400000-0x915fffff 64bit pref] > pci 0000:00:1c.3: BAR 14: assigned [mem 0x91600000-0x917fffff] > pci 0000:00:1c.3: BAR 15: assigned [mem 0x91800000-0x919fffff 64bit pref] > pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] > pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] > pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] > pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io disabled] > pci 0000:00:01.0: bridge window [mem disabled] > pci 0000:00:01.0: bridge window [mem pref disabled] > pci 0000:00:05.0: PCI bridge to [bus 02-02] > pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:05.0: bridge window [mem 0x90a00000-0x90afffff] > pci 0000:00:05.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] > pci 0000:04:00.0: PCI bridge to [bus 05-05] > pci 0000:04:00.0: bridge window [io disabled] > pci 0000:04:00.0: bridge window [mem disabled] > pci 0000:04:00.0: bridge window [mem pref disabled] > pci 0000:04:01.0: PCI bridge to [bus 06-06] > pci 0000:04:01.0: bridge window [io disabled] > pci 0000:04:01.0: bridge window [mem disabled] > pci 0000:04:01.0: bridge window [mem pref disabled] > pci 0000:04:02.0: PCI bridge to [bus 07-07] > pci 0000:04:02.0: bridge window [io 0x1000-0x1fff] > pci 0000:04:02.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:04:02.0: bridge window [mem pref disabled] > pci 0000:03:00.0: PCI bridge to [bus 04-07] > pci 0000:03:00.0: bridge window [io 0x1000-0x1fff] > pci 0000:03:00.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:03:00.0: bridge window [mem pref disabled] > pci 0000:03:00.3: PCI bridge to [bus 08-08] > pci 0000:03:00.3: bridge window [io disabled] > pci 0000:03:00.3: bridge window [mem disabled] > pci 0000:03:00.3: bridge window [mem pref disabled] > pci 0000:00:09.0: PCI bridge to [bus 03-08] > pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] > pci 0000:00:09.0: bridge window [mem 0x90000000-0x908fffff] > pci 0000:00:09.0: bridge window [mem pref disabled] > pci 0000:00:1c.0: PCI bridge to [bus 09-09] > pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > pci 0000:00:1c.0: bridge window [mem 0x90c00000-0x90dfffff] > pci 0000:00:1c.0: bridge window [mem 0x90e00000-0x90ffffff 64bit pref] > pci 0000:00:1c.1: PCI bridge to [bus 0a-0a] > pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] > pci 0000:00:1c.1: bridge window [mem 0x91000000-0x911fffff] > pci 0000:00:1c.1: bridge window [mem 0x91200000-0x913fffff 64bit pref] > pci 0000:0b:00.0: PCI bridge to [bus 0c-0c] > pci 0000:0b:00.0: bridge window [io disabled] > pci 0000:0b:00.0: bridge window [mem 0x90900000-0x909fffff] > pci 0000:0b:00.0: bridge window [mem pref disabled] > pci 0000:00:1c.2: PCI bridge to [bus 0b-0c] > pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] > pci 0000:00:1c.2: bridge window [mem 0x90900000-0x909fffff] > pci 0000:00:1c.2: bridge window [mem 0x91400000-0x915fffff 64bit pref] > pci 0000:00:1c.3: PCI bridge to [bus 0d-0d] > pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff] > pci 0000:00:1c.3: bridge window [mem 0x91600000-0x917fffff] > pci 0000:00:1c.3: bridge window [mem 0x91800000-0x919fffff 64bit pref] > pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] > pci 0000:00:1e.0: bridge window [io disabled] > pci 0000:00:1e.0: bridge window [mem disabled] > pci 0000:00:1e.0: bridge window [mem pref disabled] > alloc irq_desc for 16 on node -1 > alloc kstat_irqs on node -1 > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:01.0: setting latency timer to 64 > pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:05.0: setting latency timer to 64 > pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:09.0: setting latency timer to 64 > pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:03:00.0: setting latency timer to 64 > pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:04:00.0: setting latency timer to 64 > alloc irq_desc for 17 on node -1 > alloc kstat_irqs on node -1 > pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:04:01.0: setting latency timer to 64 > alloc irq_desc for 18 on node -1 > alloc kstat_irqs on node -1 > pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > pci 0000:04:02.0: setting latency timer to 64 > pci 0000:03:00.3: setting latency timer to 64 > pci 0000:00:1c.0: enabling device (0000 -> 0003) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: enabling device (0000 -> 0003) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:0b:00.0: setting latency timer to 64 > pci 0000:00:1c.3: enabling device (0000 -> 0003) > alloc irq_desc for 19 on node -1 > alloc kstat_irqs on node -1 > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1c.3: setting latency timer to 64 > pci 0000:00:1e.0: power state changed by ACPI to D0 > pci 0000:00:1e.0: power state changed by ACPI to D0 > pci 0000:00:1e.0: setting latency timer to 64 > pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff] > pci_bus 0000:00: resource 8 [mem 0x80000000-0xfe000000] > pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] > pci_bus 0000:02: resource 1 [mem 0x90a00000-0x90afffff] > pci_bus 0000:02: resource 2 [mem 0x80000000-0x8fffffff 64bit pref] > pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:03: resource 1 [mem 0x90000000-0x908fffff] > pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:04: resource 1 [mem 0x90000000-0x908fffff] > pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:07: resource 1 [mem 0x90000000-0x908fffff] > pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] > pci_bus 0000:09: resource 1 [mem 0x90c00000-0x90dfffff] > pci_bus 0000:09: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref] > pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff] > pci_bus 0000:0a: resource 1 [mem 0x91000000-0x911fffff] > pci_bus 0000:0a: resource 2 [mem 0x91200000-0x913fffff 64bit pref] > pci_bus 0000:0b: resource 0 [io 0x6000-0x6fff] > pci_bus 0000:0b: resource 1 [mem 0x90900000-0x909fffff] > pci_bus 0000:0b: resource 2 [mem 0x91400000-0x915fffff 64bit pref] > pci_bus 0000:0c: resource 1 [mem 0x90900000-0x909fffff] > pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff] > pci_bus 0000:0d: resource 1 [mem 0x91600000-0x917fffff] > pci_bus 0000:0d: resource 2 [mem 0x91800000-0x919fffff 64bit pref] > pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7] > pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff] > pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff] > pci_bus 0000:0e: resource 7 [mem 0x000d8000-0x000dbfff] > pci_bus 0000:0e: resource 8 [mem 0x80000000-0xfe000000] > NET: Registered protocol family 2 > IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > UDP hash table entries: 4096 (order: 5, 131072 bytes) > UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > NET: Registered protocol family 1 > pci 0000:00:1f.0: rerouting interrupts for [8086:2670] > pci 0000:02:00.0: Boot video device > PCI: CLS mismatch (256 != 64), using 64 bytes > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 12824k freed > IOMMU 2 0xfe719000: using Register based invalidation > IOMMU 1 0xfe714000: using Register based invalidation > IOMMU 0 0xfe710000: using Register based invalidation > IOMMU 3 0xfe718000: using Register based invalidation > IOMMU: Setting RMRR: > IOMMU: Prepare 0-16MiB unity mapping for LPC > IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] > alloc irq_desc for 40 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 41 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 42 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 43 on node 0 > alloc kstat_irqs on node 0 > PCI-DMA: Intel(R) Virtualization Technology for Directed I/O > audit: initializing netlink socket (disabled) > type=2000 audit(1278512489.009:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 16109 > SELinux: Registering netfilter hooks > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:01.0: setting latency timer to 64 > alloc irq_desc for 44 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:01.0: irq 44 for MSI/MSI-X > pcieport 0000:00:05.0: setting latency timer to 64 > alloc irq_desc for 45 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:05.0: irq 45 for MSI/MSI-X > pcieport 0000:00:09.0: setting latency timer to 64 > alloc irq_desc for 46 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:09.0: irq 46 for MSI/MSI-X > pcieport 0000:00:1c.0: setting latency timer to 64 > alloc irq_desc for 47 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:1c.0: irq 47 for MSI/MSI-X > pcieport 0000:00:1c.1: setting latency timer to 64 > alloc irq_desc for 48 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:1c.1: irq 48 for MSI/MSI-X > pcieport 0000:00:1c.2: setting latency timer to 64 > alloc irq_desc for 49 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:1c.2: irq 49 for MSI/MSI-X > pcieport 0000:00:1c.3: setting latency timer to 64 > alloc irq_desc for 50 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:00:1c.3: irq 50 for MSI/MSI-X > pcieport 0000:03:00.0: setting latency timer to 64 > pcieport 0000:04:00.0: setting latency timer to 64 > alloc irq_desc for 51 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:04:00.0: irq 51 for MSI/MSI-X > pcieport 0000:04:01.0: setting latency timer to 64 > alloc irq_desc for 52 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:04:01.0: irq 52 for MSI/MSI-X > pcieport 0000:04:02.0: setting latency timer to 64 > alloc irq_desc for 53 on node -1 > alloc kstat_irqs on node -1 > pcieport 0000:04:02.0: irq 53 for MSI/MSI-X > aer 0000:00:01.0:pcie02: service driver aer loaded > aer 0000:00:05.0:pcie02: service driver aer loaded > aer 0000:00:09.0:pcie02: service driver aer loaded > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > pci-stub: invalid id string "" > input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > ACPI: acpi_idle registered with cpuidle > Monitor-Mwait will be used to enter C-1 state > Non-volatile memory driver v1.3 > Linux agpgart interface v0.103 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > brd: module loaded > loop: module loaded > ata_piix 0000:00:1f.1: version 2.13 > alloc irq_desc for 20 on node -1 > alloc kstat_irqs on node -1 > ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > ata_piix 0000:00:1f.1: setting latency timer to 64 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: PATA max UDMA/100 cmd 0x30e8 ctl 0x30fc bmdma 0x30c0 irq 20 > ata2: PATA max UDMA/100 cmd 0x30e0 ctl 0x30f8 bmdma 0x30c8 irq 20 > alloc irq_desc for 21 on node -1 > alloc kstat_irqs on node -1 > ata_piix 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ata_piix 0000:00:1f.2: setting latency timer to 64 > scsi2 : ata_piix > scsi3 : ata_piix > ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 21 > ata4: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 21 > Fixed MDIO Bus: probed > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90b08400 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.35-rc3+ ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 19, io base 0x000030a0 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003080 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > alloc irq_desc for 22 on node -1 > alloc kstat_irqs on node -1 > uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 > uhci_hcd 0000:00:1d.3: setting latency timer to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.3 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > PNP: No PS/2 controller found. Probing ports directly. > i8042.c: No controller found. > mice: PS/2 mouse device common for all mice > rtc_cmos 00:07: RTC can wake from S4 > rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 17 > PM: Resume from disk failed. > registered taskstats version 1 > IMA: No TPM chip found, activating TPM-bypass! > Magic number: 2:837:383 > usb usb1: hash matches > rtc_cmos 00:07: setting system clock to 2010-07-07 14:21:29 UTC (1278512489) > Initalizing network drop monitor service > ata1.00: ATAPI: PIONEER DVD-RW DVR-112D, BC14, max UDMA/66 > ata3.00: ATA-8: ST3750330AS, SD15, max UDMA/133 > ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata1.00: configured for UDMA/66 > scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D BC14 PQ: 0 ANSI: 5 > sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 0:0:0:0: Attached scsi CD-ROM sr0 > sr 0:0:0:0: Attached scsi generic sg0 type 5 > ata3.01: ATA-7: ST3320820AS_P, 3.BQE, max UDMA/133 > ata3.01: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) > ata4.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 > ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata3.00: configured for UDMA/133 > ata3.01: configured for UDMA/133 > scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5 > sd 2:0:0:0: Attached scsi generic sg1 type 0 > sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 > scsi 2:0:1:0: Direct-Access ATA ST3320820AS_P 3.BQ PQ: 0 ANSI: 5 > sd 2:0:1:0: Attached scsi generic sg2 type 0 > sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) > sd 2:0:1:0: [sdb] Write Protect is off > sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 > sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > > sdb: > sd 2:0:0:0: [sda] Attached SCSI disk > ata4.00: configured for UDMA/133 > scsi 3:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB) > sd 3:0:0:0: Attached scsi generic sg3 type 0 > sd 3:0:0:0: [sdc] Write Protect is off > sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sdc: sdb1 sdb2 > sd 2:0:1:0: [sdb] Attached SCSI disk > sdc1 sdc2 sdc3 sdc4 sdc5 > sd 3:0:0:0: [sdc] Attached SCSI disk > Freeing unused kernel memory: 1508k freed > Write protecting the kernel read-only data: 10240k > Freeing unused kernel memory: 1816k freed > Freeing unused kernel memory: 1968k freed > dracut: dracut-005-3.fc13 > udev: starting version 151 > [drm] Initialized drm 1.1.0 20060810 > [drm] VGACON disable radeon kernel modesetting. > pci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > pci 0000:02:00.0: setting latency timer to 64 > [drm] Initialized radeon 1.33.0 20080528 for 0000:02:00.0 on minor 0 > dracut: Starting plymouth daemon > firewire_ohci 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > usb 2-1: new full speed USB device using uhci_hcd and address 2 > firewire_ohci: Added fw-ohci device 0000:0c:00.0, OHCI v1.10, 8 IR + 8 > IT contexts, quirks 0x2 > usb 2-1: New USB device found, idVendor=05a4, idProduct=9835 > usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-1: Product: USB Keyboard Hub > usb 2-1: Manufacturer: ORTEK > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 3 ports detected > usb 4-2: new full speed USB device using uhci_hcd and address 2 > firewire_core: created device fw0: GUID 001ff3fffe8908b0, S800 > firewire_core: phy config: card 0, new root=ffc1, gap_count=5 > usb 4-2: New USB device found, idVendor=05ac, idProduct=1000 > usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) > input: HID 05ac:1000 as > /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2 > generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard > [HID 05ac:1000] on usb-0000:00:1d.2-2/input0 > dracut: Mounted root filesystem /dev/sdc2 > input: HID 05ac:1000 as > /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input3 > generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse > [HID 05ac:1000] on usb-0000:00:1d.2-2/input1 > dracut: Loading SELinux policy > usb 2-1.3: new full speed USB device using uhci_hcd and address 3 > usb 2-1.3: New USB device found, idVendor=05a4, idProduct=9860 > usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-1.3: Product: USB Keyboard Hub > usb 2-1.3: Manufacturer: ORTEK > input: ORTEK USB Keyboard Hub as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4 > generic-usb 0003:05A4:9860.0003: input,hidraw2: USB HID v1.10 Keyboard > [ORTEK USB Keyboard Hub] on usb-0000:00:1d.0-1.3/input0 > input: ORTEK USB Keyboard Hub as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input5 > generic-usb 0003:05A4:9860.0004: input,hidraw3: USB HID v1.10 Device > [ORTEK USB Keyboard Hub] on usb-0000:00:1d.0-1.3/input1 > SELinux: 2048 avtab hash slots, 196346 rules. > SELinux: 2048 avtab hash slots, 196346 rules. > SELinux: 9 users, 13 roles, 3270 types, 159 bools, 1 sens, 1024 cats > SELinux: 77 classes, 196346 rules > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev sdc2, type ext4), uses xattr > type=1403 audit(1278512491.340:2): policy loaded auid=4294967295 ses=4294967295 > dracut: Switching root > readahead: starting > udev: starting version 151 > usb 4-2: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 > usb 4-2: USB disconnect, address 2 > iTCO_vendor_support: vendor-support=0 > i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > ACPI: resource 0000:00:1f.3 [io 0x3000-0x301f] conflicts with ACPI > region SMBI [mem 0x00003000-0x0000300f window] > ACPI: If an ACPI driver is available for this device, you should use > it instead of the native driver > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 > iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it > usb 4-2: new full speed USB device using uhci_hcd and address 3 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > applesmc: Apple MacPro3 detected: > applesmc: - Model without accelerometer > applesmc: - Model without light sensors and backlight > applesmc: - Model with 40 temperature sensors > applesmc: device successfully initialized. > applesmc: 4 fans found. > applesmc: driver successfully loaded. > usb 4-2: New USB device found, idVendor=05ac, idProduct=8206 > usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > i5k_amb: probe of i5k_amb.0 failed with error -16 > type=1400 audit(1278537694.813:3): avc: denied { mmap_zero } for > pid=754 comm="vbetool" > scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 > tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect > EDAC MC: Ver: 2.1.0 Jun 29 2010 > EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0 > EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC > PCI controller': DEV '0000:00:10.0' (POLLED) > Bluetooth: Core ver 2.15 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: Generic Bluetooth USB driver ver 0.6 > usbcore: registered new interface driver btusb > alloc irq_desc for 23 on node -1 > alloc kstat_irqs on node -1 > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > alloc irq_desc for 54 on node -1 > alloc kstat_irqs on node -1 > HDA Intel 0000:00:1b.0: irq 54 for MSI/MSI-X > HDA Intel 0000:00:1b.0: setting latency timer to 64 > e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 > e1000e: Copyright (c) 1999 - 2009 Intel Corporation. > e1000e 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > e1000e 0000:07:00.0: setting latency timer to 64 > alloc irq_desc for 55 on node -1 > alloc kstat_irqs on node -1 > e1000e 0000:07:00.0: irq 55 for MSI/MSI-X > e1000e 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:1f:5b:39:85:28 > e1000e 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection > e1000e 0000:07:00.0: eth0: MAC: 5, PHY: 5, PBA No: 3070ff-0ff > e1000e 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > e1000e 0000:07:00.1: setting latency timer to 64 > alloc irq_desc for 56 on node -1 > alloc kstat_irqs on node -1 > e1000e 0000:07:00.1: irq 56 for MSI/MSI-X > hda_codec: ALC889A: SKU not ready 0x400000f0 > input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 > e1000e 0000:07:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:1f:5b:39:85:29 > e1000e 0000:07:00.1: eth1: Intel(R) PRO/1000 Network Connection > e1000e 0000:07:00.1: eth1: MAC: 5, PHY: 5, PBA No: 3070ff-0ff > EXT4-fs (sdc2): re-mounted. Opts: (null) > EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) > SELinux: initialized (dev sdc1, type ext4), uses xattr > EXT3-fs: barriers not enabled > kjournald starting. Commit interval 5 seconds > EXT3-fs (sdc5): using internal journal > EXT3-fs (sdc5): mounted filesystem with ordered data mode > SELinux: initialized (dev sdc5, type ext3), uses xattr > Adding 9215996k swap on /dev/sdc4. Priority:-1 extents:1 across:9215996k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > e1000e 0000:07:00.0: irq 55 for MSI/MSI-X > e1000e 0000:07:00.0: irq 55 for MSI/MSI-X > ADDRCONF(NETDEV_UP): eth0: link is not ready > e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > Bluetooth: L2CAP ver 2.14 > Bluetooth: L2CAP socket layer initialized > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bridge firewalling registered > Bluetooth: SCO (Voice Link) ver 0.6 > Bluetooth: SCO socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > fuse init (API version 7.14) > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts > dca service started, version 1.12.1 > ioatdma: Intel(R) QuickData Technology Driver 4.00 > ioatdma 0000:00:0f.0: can't derive routing for PCI INT A > ioatdma 0000:00:0f.0: PCI INT A: no GSI > ioatdma 0000:00:0f.0: setting latency timer to 64 > alloc irq_desc for 57 on node -1 > alloc kstat_irqs on node -1 > ioatdma 0000:00:0f.0: irq 57 for MSI/MSI-X > alloc irq_desc for 58 on node -1 > alloc kstat_irqs on node -1 > ioatdma 0000:00:0f.0: irq 58 for MSI/MSI-X > alloc irq_desc for 59 on node -1 > alloc kstat_irqs on node -1 > ioatdma 0000:00:0f.0: irq 59 for MSI/MSI-X > alloc irq_desc for 60 on node -1 > alloc kstat_irqs on node -1 > ioatdma 0000:00:0f.0: irq 60 for MSI/MSI-X > ioatdma 0000:00:0f.0: failed to start channel chanerr: 0x10 > ioatdma 0000:00:0f.0: Freeing 1 in use descriptors! > ioatdma 0000:00:0f.0: selftest cannot allocate chan resource > ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed > ioatdma 0000:00:0f.0: can't derive routing for PCI INT A -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/