Message-ID: <4C47EE50.4020903@cn.fujitsu.com>
Date: Thu, 22 Jul 2010 15:08:00 +0800
From: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
User-Agent: Thunderbird 2.0.0.24 (Windows/20100228)
MIME-Version: 1.0
To: Vivek Goyal <vgoyal@redhat.com>
CC: linux-kernel@vger.kernel.org, axboe@kernel.dk, nauman@google.com,
        dpshah@google.com, jmoyer@redhat.com, czoccolo@gmail.com
Subject: Re: [RFC PATCH] cfq-iosced: Implement IOPS mode and group_idle tunable
 V3
References: <1279739181-24482-1-git-send-email-vgoyal@redhat.com>
In-Reply-To: <1279739181-24482-1-git-send-email-vgoyal@redhat.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3843
Lines: 89

Vivek Goyal wrote:
> Hi,
> 
> This is V3 of the group_idle and CFQ IOPS mode implementation patchset. Since V2
> I have cleaned up the code a bit to clarify the confusion lingering around in
> what cases do we charge time slice and in what cases do we charge number of
> requests.
> 
> What's the problem
> ------------------
> On high end storage (I got on HP EVA storage array with 12 SATA disks in 
> RAID 5), CFQ's model of dispatching requests from a single queue at a
> time (sequential readers/write sync writers etc), becomes a bottleneck.
> Often we don't drive enough request queue depth to keep all the disks busy
> and suffer a lot in terms of overall throughput.
> 
> All these problems primarily originate from two things. Idling on per
> cfq queue and quantum (dispatching limited number of requests from a
> single queue) and till then not allowing dispatch from other queues. Once
> you set the slice_idle=0 and quantum to higher value, most of the CFQ's
> problem on higher end storage disappear.
> 
> This problem also becomes visible in IO controller where one creates
> multiple groups and gets the fairness but overall throughput is less. In
> the following table, I am running increasing number of sequential readers
> (1,2,4,8) in 8 groups of weight 100 to 800.
> 
> Kernel=2.6.35-rc5-iops+
> GROUPMODE=1          NRGRP=8
> DIR=/mnt/iostestmnt/fio        DEV=/dev/dm-4
> Workload=bsr      iosched=cfq     Filesz=512M bs=4K
> group_isolation=1 slice_idle=8    group_idle=8    quantum=8
> =========================================================================
> AVERAGE[bsr]    [bw in KB/s]
> -------
> job     Set NR  cgrp1  cgrp2  cgrp3  cgrp4  cgrp5  cgrp6  cgrp7  cgrp8  total
> ---     --- --  ---------------------------------------------------------------
> bsr     3   1   6186   12752  16568  23068  28608  35785  42322  48409  213701
> bsr     3   2   5396   10902  16959  23471  25099  30643  37168  42820  192461
> bsr     3   4   4655   9463   14042  20537  24074  28499  34679  37895  173847
> bsr     3   8   4418   8783   12625  19015  21933  26354  29830  36290  159249
> 
> Notice that overall throughput is just around 160MB/s with 8 sequential reader
> in each group.
> 
> With this patch set, I have set slice_idle=0 and re-ran same test.
> 
> Kernel=2.6.35-rc5-iops+
> GROUPMODE=1          NRGRP=8
> DIR=/mnt/iostestmnt/fio        DEV=/dev/dm-4
> Workload=bsr      iosched=cfq     Filesz=512M bs=4K
> group_isolation=1 slice_idle=0    group_idle=8    quantum=8
> =========================================================================
> AVERAGE[bsr]    [bw in KB/s]
> -------
> job     Set NR  cgrp1  cgrp2  cgrp3  cgrp4  cgrp5  cgrp6  cgrp7  cgrp8  total
> ---     --- --  ---------------------------------------------------------------
> bsr     3   1   6523   12399  18116  24752  30481  36144  42185  48894  219496
> bsr     3   2   10072  20078  29614  38378  46354  52513  58315  64833  320159
> bsr     3   4   11045  22340  33013  44330  52663  58254  63883  70990  356520
> bsr     3   8   12362  25860  37920  47486  61415  47292  45581  70828  348747
> 
> Notice how overall throughput has shot upto 348MB/s while retaining the ability
> to do the IO control.
> 
> So this is not the default mode. This new tunable group_idle, allows one to
> set slice_idle=0 to disable some of the CFQ features and and use primarily
> group service differentation feature.
> 
> If you have thoughts on other ways of solving the problem, I am all ears
> to it.

Hi Vivek

Would you attach your fio job config file?

Thanks
Gui

> 
> Thanks
> Vivek
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/