Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753692Ab0GWDZT (ORCPT ); Thu, 22 Jul 2010 23:25:19 -0400 Received: from mx3-phx2.redhat.com ([209.132.183.24]:40020 "EHLO mx01.colomx.prod.int.phx2.redhat.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751005Ab0GWDZQ (ORCPT ); Thu, 22 Jul 2010 23:25:16 -0400 Date: Thu, 22 Jul 2010 23:25:15 -0400 (EDT) From: caiqian@redhat.com To: linux-kernel Cc: Dave Anderson , Avi Kivity Message-ID: <198123598.1050221279855515402.JavaMail.root@zmail06.collab.prod.int.phx2.redhat.com> In-Reply-To: <1289916563.1050101279855288046.JavaMail.root@zmail06.collab.prod.int.phx2.redhat.com> Subject: 2.6.35-rc5 panic at __br_deliver+0x64/0xe0 with kvm bridge networking MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_56377_113474362.1279855515400" X-Originating-IP: [10.5.5.72] X-Mailer: Zimbra 5.0.21_GA_3150.RHEL4_64 (ZimbraWebClient - FF3.0 (Linux)/5.0.21_GA_3150.RHEL4_64) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 96808 Lines: 2162 ------=_Part_56377_113474362.1279855515400 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I met consistently host panic when operated under kvm guest with bridge networking. I got a vmcore (unfortunately, the crash utility had some problems to analyse it fully), and full panic log is attached. general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0A:00/power_supply/BAT0/energy_full CPU 0 Modules linked in: xfs exportfs sit tunnel4 fuse ebtable_nat ebtables rfcomm sco bridge stp llc bnep l2cap autofs4 sunrpc xt_physdev ipt_MASQUERADE iptable_nat nf_nat ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm_intel kvm uinput usb_storage sr_mod cdrom pcspkr xhci_hcd ext4 mbcache jbd2 cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt sg sd_mod crc_t10dif i2c_i801 ahci libahci arc4 iTCO_wdt ecb iTCO_vendor_support iwlagn iwlcore mac80211 cfg80211 snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd_page_alloc thinkpad_acpi hwmon snd soundcore wmi e1000e btusb bluetooth rfkill i915 drm_kms_helper drm i2c_algo_bit i2c_core video output dm_mod [last unloaded: microcode] Pid: 1604, comm: cups-polld Not tainted 2.6.35-rc5 #1 7459H94/7459H94 RIP: 0010:[] [] __br_deliver+0x64/0xe0 [bridge] RSP: 0018:ffff880134cbb778 EFLAGS: 00010296 RAX: 5a5a5a5a5a5a5a5a RBX: ffff880035d2c980 RCX: 0000000000000003 RDX: 0000000000001c70 RSI: ffff880125154c98 RDI: 0000000000000000 RBP: ffff880134cbb798 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88012331c288 R13: ffff88012331c2b0 R14: ffff88012e252c16 R15: ffff880035d2c000 FS: 00007ffa879807c0(0000) GS:ffff88000b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f99ba6c5020 CR3: 0000000125c6d000 CR4: 00000000000426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cups-polld (pid: 1604, threadinfo ffff880134cba000, task ffff8801251542d0) Stack: ffff880180000000 ffffffff81098ebd ffff88012331c288 ffff880035d2c980 <0> ffff880134cbb7a8 ffffffffa061cc05 ffff880134cbb7d8 ffffffffa061b7b4 <0> ffff88012331c288 ffffffff81c3e5c0 ffff88012331cac8 ffffffff81c3e600 Call Trace: [] ? lock_release_holdtime+0x3d/0x190 [] br_deliver+0x35/0x40 [bridge] [] br_dev_xmit+0xb4/0x160 [bridge] [] dev_hard_start_xmit+0x2fd/0x450 [] ? dev_hard_start_xmit+0x69/0x450 [] ? get_parent_ip+0x11/0x50 [] dev_queue_xmit+0x4f6/0x7b0 [] ? dev_queue_xmit+0x4f/0x7b0 [] ? trace_hardirqs_on+0xd/0x10 [] ? local_bh_enable_ip+0x97/0x100 [] neigh_resolve_output+0x113/0x3f0 [] ip_finish_output+0x1a4/0x4b0 [] ip_output+0xbb/0x110 [] ip_local_out+0x2d/0x80 [] ip_queue_xmit+0x1c2/0x500 [] ? ip_queue_xmit+0x0/0x500 [] ? __kmalloc_node_track_caller+0x87/0x110 [] ? kmem_cache_alloc_node_notrace+0x10b/0x210 [] ? __kmalloc_node_track_caller+0x87/0x110 [] tcp_transmit_skb+0x3f8/0x8a0 [] tcp_send_ack+0xdd/0x130 [] tcp_cleanup_rbuf+0x76/0x110 [] tcp_recvmsg+0x450/0xd10 [] inet_recvmsg+0xcd/0xf0 [] sock_recvmsg+0xfd/0x130 [] ? sock_sendmsg+0xf3/0x130 [] ? sched_clock+0x9/0x10 [] ? sched_clock_local+0x25/0x90 [] ? sched_clock_cpu+0xb8/0x110 [] ? trace_hardirqs_off+0xd/0x10 [] ? cpu_clock+0x6f/0x80 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? trace_hardirqs_on+0xd/0x10 [] sys_recvfrom+0xe1/0x170 [] ? hrtimer_nanosleep+0x132/0x190 [] ? sysret_check+0x2e/0x69 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: c9 49 c7 c1 90 ca 61 a0 4c 89 e2 be 03 00 00 00 bf 07 00 00 00 c7 04 24 00 00 00 80 e8 96 c6 e1 e0 83 f8 01 74 31 49 8b 44 24 20 <48> 8b 80 08 05 00 00 48 85 c0 74 0e 48 8b 80 d0 01 00 00 48 8b RIP [] __br_deliver+0x64/0xe0 [bridge] RSP ------=_Part_56377_113474362.1279855515400 Content-Type: application/octet-stream; name=log Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=log Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-rc5 (root@dhcp-65-141.nay.redhat.com) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Jul 16 18:59:17 CST 2010 Command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LUKS_UUID=luks-fb264012-c3c0-4582-ab76-23b4454215b3 rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rdshell rdinitdebug crashkernel=128M 1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable) BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved) BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable) BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved) BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable) BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS) BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data) BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved) BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS) BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved) BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS) BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data) BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved) BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS) BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data) BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable) BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) NX (Execute Disable) protection: active DMI present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x13c000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 13C000000 mask FFC000000 uncachable 1 base 0BE000000 mask FFE000000 uncachable 2 base 000000000 mask F80000000 write-back 3 base 080000000 mask FC0000000 write-back 4 base 100000000 mask FC0000000 write-back 5 base 0BDE00000 mask FFFE00000 uncachable 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 5056MB, range: 64MB, type UC reg 1, base: 3040MB, range: 32MB, type UC reg 2, base: 0GB, range: 2GB, type WB reg 3, base: 2GB, range: 1GB, type WB reg 4, base: 4GB, range: 1GB, type WB reg 5, base: 3038MB, range: 2MB, type UC total RAM covered: 3998M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3038MB, range: 2MB, type UC reg 3, base: 3040MB, range: 32MB, type UC reg 4, base: 4GB, range: 1GB, type WB reg 5, base: 5056MB, range: 64MB, type UC e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbda00 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f72e0] f72e0 init_memory_mapping: 0000000000000000-00000000bda00000 0000000000 - 00bda00000 page 2M kernel direct mapping tables up to bda00000 @ 8000-c000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ a000-10000 RAMDISK: 3410a000 - 37ff0000 Reserving 128MB of memory at 48MB for crashkernel (System RAM: 5056MB) ACPI: RSDP 00000000000f72a0 00024 (v02 LENOVO) ACPI: XSDT 00000000bd95b8ab 00094 (v01 LENOVO TP-6D 00003100 LTP 00000000) ACPI: FACP 00000000bd95ba00 000F4 (v03 LENOVO TP-6D 00003100 LNVO 00000001) ACPI: DSDT 00000000bd95bdf4 0DF28 (v01 LENOVO TP-6D 00003100 MSFT 03000000) ACPI: FACS 00000000bd98e000 00040 ACPI: SSDT 00000000bd95bbb4 00240 (v01 LENOVO TP-6D 00003100 MSFT 03000000) ACPI: ECDT 00000000bd969d1c 00052 (v01 LENOVO TP-6D 00003100 LNVO 00000001) ACPI: APIC 00000000bd969d6e 00078 (v01 LENOVO TP-6D 00003100 LNVO 00000001) ACPI: MCFG 00000000bd969de6 0003C (v01 LENOVO TP-6D 00003100 LNVO 00000001) ACPI: HPET 00000000bd969e22 00038 (v01 LENOVO TP-6D 00003100 LNVO 00000001) ACPI: BOOT 00000000bd969f38 00028 (v01 LENOVO TP-6D 00003100 LTP 00000001) ACPI: ASF! 00000000bd969f60 000A0 (v16 LENOVO TP-6D 00003100 PTL 00000001) ACPI: SSDT 00000000bd98d1ea 00578 (v01 LENOVO TP-6D 00003100 INTL 20050513) ACPI: TCPA 00000000bd707000 00032 (v00 00000000 00000000) ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001 00000000) ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000013c000000 Initmem setup node 0 0000000000000000-000000013c000000 NODE_DATA [0000000100000000 - 0000000100026fff] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000001 -> 0x0000009e 0: 0x00000100 -> 0x000bd4a1 0: 0x000bd4a7 -> 0x000bd5b7 0: 0x000bd60f -> 0x000bd6c6 0: 0x000bd9ff -> 0x000bda00 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1021446 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3941 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 757409 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [7000 - 77ff] early_res array is doubled to 128 at [b000 - bfff] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000 PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000 PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000 PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000 PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000 PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000 PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000 PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000 PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000 PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000 PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000 PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000 PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000 PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 479 pages/cpu @ffff88000b000000 s1932352 r8192 d21440 u2097152 pcpu-alloc: s1932352 r8192 d21440 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003750 Policy zone: Normal Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LUKS_UUID=luks-fb264012-c3c0-4582-ab76-23b4454215b3 rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rdshell rdinitdebug crashkernel=128M 1 PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Subtract (85 early reservations) #1 [0001000000 - 0002ea71f8] TEXT DATA BSS #2 [003410a000 - 0037ff0000] RAMDISK #3 [0002ea8000 - 0002ea814c] BRK #4 [00000f72f0 - 0000100000] BIOS reserved #5 [00000f72e0 - 00000f72f0] MP-table mpf #6 [000009ec00 - 000009f171] BIOS reserved #7 [000009f27d - 00000f72e0] BIOS reserved #8 [000009f171 - 000009f27d] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000b000] PGTABLE #13 [0003000000 - 000b000000] CRASH KERNEL #14 [0100000000 - 0100027000] NODE_DATA #15 [0002ea8180 - 0002ea9180] BOOTMEM #16 [0002ea7200 - 0002ea7500] BOOTMEM #17 [0100027000 - 0100028000] BOOTMEM #18 [0100028000 - 0100029000] BOOTMEM #19 [0100200000 - 0103a00000] MEMMAP 0 #20 [0002ea9180 - 0002ef9180] BOOTMEM #21 [0002ef9180 - 0002f49180] BOOTMEM #22 [0002f49180 - 0002f99180] BOOTMEM #23 [0002f9a000 - 0002f9b000] BOOTMEM #24 [0002ea7500 - 0002ea7541] BOOTMEM #25 [0002ea7580 - 0002ea75c3] BOOTMEM #26 [0002ea7600 - 0002ea7c90] BOOTMEM #27 [0002ea7cc0 - 0002ea7d28] BOOTMEM #28 [0002ea7d40 - 0002ea7da8] BOOTMEM #29 [0002ea7dc0 - 0002ea7e28] BOOTMEM #30 [0002ea7e40 - 0002ea7ea8] BOOTMEM #31 [0002ea7ec0 - 0002ea7f28] BOOTMEM #32 [0002ea7f40 - 0002ea7fa8] BOOTMEM #33 [0002f99180 - 0002f991e8] BOOTMEM #34 [0002f99200 - 0002f99268] BOOTMEM #35 [0002f99280 - 0002f992e8] BOOTMEM #36 [0002f99300 - 0002f99368] BOOTMEM #37 [0002f99380 - 0002f993e8] BOOTMEM #38 [0002f99400 - 0002f99468] BOOTMEM #39 [0002f99480 - 0002f994e8] BOOTMEM #40 [0002f99500 - 0002f99568] BOOTMEM #41 [0002f99580 - 0002f995e8] BOOTMEM #42 [0002f99600 - 0002f99668] BOOTMEM #43 [0002f99680 - 0002f996e8] BOOTMEM #44 [0002f99700 - 0002f99768] BOOTMEM #45 [0002f99780 - 0002f997e8] BOOTMEM #46 [0002f99800 - 0002f99868] BOOTMEM #47 [0002f99880 - 0002f998e8] BOOTMEM #48 [0002f99900 - 0002f99968] BOOTMEM #49 [0002f99980 - 0002f999e8] BOOTMEM #50 [0002f99a00 - 0002f99a68] BOOTMEM #51 [0002f99a80 - 0002f99ae8] BOOTMEM #52 [0002f99b00 - 0002f99b68] BOOTMEM #53 [0002f99b80 - 0002f99be8] BOOTMEM #54 [0002f99c00 - 0002f99c68] BOOTMEM #55 [0002f99c80 - 0002f99ce8] BOOTMEM #56 [0002ea7fc0 - 0002ea7fe0] BOOTMEM #57 [0002f99d00 - 0002f99d20] BOOTMEM #58 [0002f99d40 - 0002f99d60] BOOTMEM #59 [0002f99d80 - 0002f99da0] BOOTMEM #60 [0002f99dc0 - 0002f99de0] BOOTMEM #61 [0002f99e00 - 0002f99ef7] BOOTMEM #62 [0002f99f00 - 0002f99ff7] BOOTMEM #63 [000b000000 - 000b1df000] BOOTMEM #64 [000b200000 - 000b3df000] BOOTMEM #65 [000b400000 - 000b5df000] BOOTMEM #66 [000b600000 - 000b7df000] BOOTMEM #67 [0002f9d000 - 0002f9d008] BOOTMEM #68 [0002f9d040 - 0002f9d048] BOOTMEM #69 [0002f9d080 - 0002f9d090] BOOTMEM #70 [0002f9d0c0 - 0002f9d0e0] BOOTMEM #71 [0002f9d100 - 0002f9d250] BOOTMEM #72 [0002f9d280 - 0002f9d300] BOOTMEM #73 [0002f9d300 - 0002f9d380] BOOTMEM #74 [0002f9b000 - 0002f9b200] BOOTMEM #75 [0002f9b200 - 0002f9b400] BOOTMEM #76 [0002f9b400 - 0002f9b600] BOOTMEM #77 [0002f9b600 - 0002f9b800] BOOTMEM #78 [0002f9b800 - 0002f9ba00] BOOTMEM #79 [0002f9d380 - 0002fa5380] BOOTMEM #80 [0002f9ba00 - 0002f9bc40] BOOTMEM #81 [000b7df000 - 000f7df000] BOOTMEM #82 [0002fa5380 - 0002fc5380] BOOTMEM #83 [000f7df000 - 000f81f000] BOOTMEM #84 [000000c000 - 0000014000] BOOTMEM Memory: 3726740k/5177344k available (5054k kernel code, 1091560k absent, 359044k reserved, 7493k data, 3428k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:262400 nr_irqs:712 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 12 of 12 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 2393.634 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.26 BogoMIPS (lpj=2393634) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100428 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 18587 entries in 73 pages DMAR: Host address width 36 DMAR: DRHD base: 0x000000feb03000 flags: 0x0 IOMMU 0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000 DMAR: DRHD base: 0x000000feb01000 flags: 0x0 IOMMU 1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000 DMAR: DRHD base: 0x000000feb00000 flags: 0x0 IOMMU 2: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000 DMAR: DRHD base: 0x000000feb02000 flags: 0x1 IOMMU 3: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000 DMAR: RMRR base: 0x000000f2826c00 end: 0x000000f28273ff DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff DMAR: No ATSR found Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a lockdep: fixing up alternatives. Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (9575.02 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] DMAR: Forcing write-buffer flush capability DMAR: Disabling IOMMU for graphics on this chipset pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [mem 0xf1f00000-0xf1f01fff 64bit] pci 0000:05:00.0: PME# supported from D0 D3hot pci 0000:05:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009ec00 - 000000000009ffff reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff reserve RAM buffer: 00000000bda00000 - 00000000bfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] has been reserved system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved system 00:02: [io 0x1000-0x107f] has been reserved system 00:02: [io 0x1180-0x11ff] has been reserved system 00:02: [io 0x0800-0x080f] has been reserved system 00:02: [io 0x15e0-0x15ef] has been reserved system 00:02: [io 0x1600-0x167f] has been reserved system 00:02: [io 0x1680-0x169f] has been reserved system 00:02: [mem 0xe0000000-0xefffffff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 6, 327680 bytes) UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 64408k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config DMAR: Device scope device [0000:00:03.02] not found DMAR: Device scope device [0000:00:03.02] not found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88000b7df000 - ffff88000f7df000 software IO TLB at phys 0xb7df000 - 0xf7df000 Simple Boot Flag at 0x35 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1279766654.219:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7404 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5832 bytes left cryptomgr_test used greatest stack depth: 5768 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 40 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 41 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 42 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: Slot 1 already registered by another hotplug driver pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet kwatchdog used greatest stack depth: 5688 bytes left thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (64 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (64 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel GM45 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory ACPI: Battery Slot [BAT0] (battery present) agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A brd: module loaded loop: module loaded Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-rc5 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.35-rc5 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! rtc_cmos 00:07: setting system clock to 2010-07-22 02:44:15 UTC (1279766655) Initalizing network drop monitor service Freeing unused kernel memory: 3428k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1072k freed Freeing unused kernel memory: 1728k freed mknod used greatest stack depth: 5504 bytes left mount used greatest stack depth: 5296 bytes left dracut: + mkdir /dev/shm dracut: + mkdir /dev/pts dracut: + mount -t devpts -o gid=5,mode=620 devpts /dev/pts dracut: + mount -t tmpfs tmpfs /dev/shm dracut: + udevadm --version dracut: + UDEVVERSION=147 dracut: + source_conf /etc/conf.d dracut: + local f dracut: + [ /etc/conf.d ] dracut: + [ -d //etc/conf.d ] dracut: + return dracut: + getarg rdbreak=cmdline dracut: + set +x dracut: + return 1 dracut: + source_all cmdline dracut: + local f dracut: + [ cmdline ] dracut: + [ -d /cmdline ] dracut: + [ -e /cmdline/01parse-kernel.sh ] dracut: + . /cmdline/01parse-kernel.sh dracut: + getargs rdloaddriver= dracut: + set +x dracut: + return 1 dracut: + [ -e /cmdline/01version.sh ] dracut: + . /cmdline/01version.sh dracut: + [ -f dracut-004-23.el6 ] dracut: + vinfo dracut: + read line dracut: dracut-004-23.el6 dracut: + info dracut-004-23.el6 dracut: + check_quiet dracut: + [ -z ] dracut: + DRACUT_QUIET=yes dracut: + getarg rdinfo dracut: + set +x dracut: + return 1 dracut: + getarg quiet dracut: + set +x dracut: + return 1 dracut: + DRACUT_QUIET=yes dracut: + echo <6>dracut: dracut-004-23.el6 dracut: + [ yes != yes ] dracut: + read line dracut: + unset i dracut: + [ -e /cmdline/10parse-resume.sh ] dracut: + . /cmdline/10parse-resume.sh dracut: + getarg resume= dracut: + set +x dracut: + return 1 dracut: + resume= dracut: + unset resume dracut: + [ -e /cmdline/10parse-root-opts.sh ] dracut: + . /cmdline/10parse-root-opts.sh dracut: + getarg root= dracut: + set +x dracut: + return 0 dracut: + root=/dev/mapper/VolGroup-lv_root dracut: + getarg rootflags= dracut: + set +x dracut: + return 1 dracut: + rflags= dracut: + getarg rw dracut: + set +x dracut: + return 1 dracut: + rflags=ro dracut: + getarg rootfstype= dracut: + set +x dracut: + return 1 dracut: + fstype= dracut: + [ -z ] dracut: + fstype=auto dracut: + [ -e /cmdline/20parse-blacklist.sh ] dracut: + . /cmdline/20parse-blacklist.sh dracut: + getargs rdblacklist= dracut: + set +x dracut: + return 1 dracut: + [ -e /cmdline/20parse-i18n.sh ] dracut: + . /cmdline/20parse-i18n.sh dracut: + mkdir -p /etc/sysconfig dracut: + inst_key_val KEYBOARDTYPE /etc/sysconfig/keyboard dracut: + local value dracut: + getarg KEYBOARDTYPE dracut: + set +x dracut: + return 0 dracut: + value=pc dracut: + [ -n pc ] dracut: + printf %s="%s"n KEYBOARDTYPE pc dracut: + inst_key_val KEYTABLE /etc/sysconfig/keyboard dracut: + local value dracut: + getarg KEYTABLE dracut: + set +x dracut: + return 0 dracut: + value=us dracut: + [ -n us ] dracut: + printf %s="%s"n KEYTABLE us dracut: + inst_key_val SYSFONT /etc/sysconfig/i18n dracut: + local value dracut: + getarg SYSFONT dracut: + set +x dracut: + return 0 dracut: + value=latarcyrheb-sun16 dracut: + [ -n latarcyrheb-sun16 ] dracut: + printf %s="%s"n SYSFONT latarcyrheb-sun16 dracut: + inst_key_val SYSFONTACM /etc/sysconfig/i18n dracut: + local value dracut: + getarg SYSFONTACM dracut: + set +x dracut: + return 1 dracut: + value= dracut: + [ -n ] dracut: + inst_key_val UNIMAP /etc/sysconfig/i18n dracut: + local value dracut: + getarg UNIMAP dracut: + set +x dracut: + return 1 dracut: + value= dracut: + [ -n ] dracut: + inst_key_val LANG /etc/sysconfig/i18n dracut: + local value dracut: + getarg LANG dracut: + set +x dracut: + return 0 dracut: + value=en_US.UTF-8 dracut: + [ -n en_US.UTF-8 ] dracut: + printf %s="%s"n LANG en_US.UTF-8 dracut: + [ -f /etc/sysconfig/i18n ] dracut: + . /etc/sysconfig/i18n dracut: + SYSFONT=latarcyrheb-sun16 dracut: + LANG=en_US.UTF-8 dracut: + export LANG dracut: + [ -e /cmdline/30parse-crypt.sh ] dracut: + . /cmdline/30parse-crypt.sh dracut: + getarg rd_NO_LUKS dracut: + set +x dracut: + return 1 dracut: + [ -e /cmdline/30parse-dmsquash-live.sh ] dracut: + . /cmdline/30parse-dmsquash-live.sh dracut: + [ -z /dev/mapper/VolGroup-lv_root ] dracut: + getarg liveimg dracut: + set +x dracut: + return 1 dracut: + [ /dev/mapper/VolGroup-lv_root = live ] dracut: + [ = live ] dracut: + return dracut: + [ -e /cmdline/30parse-lvm.sh ] dracut: + . /cmdline/30parse-lvm.sh dracut: + getarg rd_NO_LVM dracut: + set +x dracut: + return 1 dracut: + [ -e /etc/lvm/lvm.conf ] dracut: + getarg rd_NO_LVMCONF dracut: + set +x dracut: + return 1 dracut: + [ -e /cmdline/95parse-block.sh ] dracut: + . /cmdline/95parse-block.sh dracut: + root=block:/dev/mapper/VolGroup-lv_root dracut: + rootok=1 dracut: + [ -z block:/dev/mapper/VolGroup-lv_root ] dracut: + [ -z 1 ] dracut: + echo root='block:/dev/mapper/VolGroup-lv_root' dracut: + echo rflags='ro' dracut: + echo fstype='auto' dracut: + echo netroot='' dracut: + echo NEWROOT='/sysroot' dracut: + getarg rdbreak=pre-udev dracut: + set +x dracut: + return 1 dracut: + source_all pre-udev dracut: + local f dracut: + [ pre-udev ] dracut: + [ -d /pre-udev ] dracut: + [ -e /pre-udev/30block-genrules.sh ] dracut: + . /pre-udev/30block-genrules.sh dracut: + [ block = block ] dracut: + [ -d /dev/.udev/rules.d ] dracut: + mkdir -p /dev/.udev/rules.d dracut: + printf KERNEL=="%s", SYMLINK+="root"n mapper/VolGroup-lv_root dracut: + printf SYMLINK=="%s", SYMLINK+="root"n mapper/VolGroup-lv_root dracut: + printf [ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }n /dev/mapper/VolGroup-lv_root /dev/mapper/VolGroup-lv_root dracut: + echo [ -e /dev/root ] dracut: + [ -e /pre-udev/30dm-pre-udev.sh ] dracut: + . /pre-udev/30dm-pre-udev.sh dracut: + modprobe dm_mod device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com dracut: + [ -e /pre-udev/30dmsquash-live-genrules.sh ] dracut: + . /pre-udev/30dmsquash-live-genrules.sh dracut: + [ block = live ] dracut: + [ -e /pre-udev/30dmsquash-liveiso-genrules.sh ] dracut: + . /pre-udev/30dmsquash-liveiso-genrules.sh dracut: + [ block = liveiso ] dracut: + [ -e /pre-udev/30mdmon-pre-udev.sh ] dracut: + . /pre-udev/30mdmon-pre-udev.sh dracut: + mkdir /dev/.mdadm dracut: + [ -e /var/run/mdadm ] dracut: + ln -s /dev/.mdadm /var/run/mdadm dracut: + [ -e /pre-udev/30resume-genrules.sh ] dracut: + . /pre-udev/30resume-genrules.sh dracut: + [ -n ] dracut: + getarg noresume dracut: + set +x dracut: + return 1 dracut: + echo SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend", RUN+="/bin/sh -c 'echo %M:%m > /sys/power/resume'" dracut: + udevd --daemon --resolve-names=never udev: starting version 147 dracut: + UDEV_LOG_PRIO_ARG=--log-priority dracut: + UDEV_QUEUE_EMPTY=udevadm settle --timeout=0 dracut: + [ 147 -lt 140 ] dracut: + getarg rdudevinfo dracut: + set +x dracut: + return 1 dracut: + getarg rdudevdebug dracut: + set +x dracut: + return 1 dracut: + getarg rdbreak=pre-trigger dracut: + set +x dracut: + return 1 dracut: + source_all pre-trigger dracut: + local f dracut: + [ pre-trigger ] dracut: + [ -d /pre-trigger ] dracut: + [ -e /pre-trigger/10plymouth-pretrigger.sh ] dracut: + . /pre-trigger/10plymouth-pretrigger.sh dracut: + getarg rd_NO_PLYMOUTH dracut: + set +x dracut: + return 1 dracut: + [ -c /dev/null ] dracut: + udevadm trigger --attr-match=class=0x030000 udevadm used greatest stack depth: 5232 bytes left dracut: + udevadm trigger --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty dracut: + udevadm settle --timeout=30 dracut: + vinfo dracut: + read line [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 usb 1-5: new high speed USB device using ehci_hcd and address 4 alloc irq_desc for 43 on node -1 alloc kstat_irqs on node -1 i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] set up 31M of stolen space IBM TrackPoint firmware: 0x0e, buttons: 3/3 usb 1-5: New USB device found, idVendor=17ef, idProduct=1005 usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 usb 4-1: new full speed USB device using uhci_hcd and address 2 async/0 used greatest stack depth: 2904 bytes left usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: Fingerprint Sensor usb 4-2: new full speed USB device using uhci_hcd and address 3 fbcon: inteldrmfb (fb0) is primary device usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready acpi device:01: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 modprobe used greatest stack depth: 2496 bytes left Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb dracut: + [ -c /dev/zero ] dracut: + [ -c /dev/systty ] dracut: + mknod /dev/systty c 4 0 dracut: + [ -c /dev/fb ] dracut: + mknod /dev/fb c 29 0 dracut: + [ -c /dev/hvc0 ] dracut: + mknod /dev/hvc0 c 229 0 dracut: + info Starting plymouth daemon dracut: Starting plymouth daemon dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: Starting plymouth daemon dracut: + [ yes != yes ] dracut: + [ -x /bin/plymouthd ] dracut: + /bin/plymouthd --attach-to-session dracut: + /lib/udev/console_init tty0 dracut: + vinfo dracut: + read line dracut: + /bin/plymouth --show-splash dracut: + [ -e /pre-trigger/30parse-dm.sh ] dracut: + . /pre-trigger/30parse-dm.sh dracut: + getarg rd_NO_DM dracut: + set +x dracut: + return 0 dracut: rd_NO_DM: removing DM RAID activation dracut: + info rd_NO_DM: removing DM RAID activation dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: rd_NO_DM: removing DM RAID activation dracut: + [ yes != yes ] dracut: + udevproperty rd_NO_DM=1 dracut: + [ -z 147 ] dracut: + [ 147 -ge 143 ] dracut: + udevadm control --property=rd_NO_DM=1 dracut: rd_NO_MD: removing MD RAID activation dracut: + [ -e /pre-trigger/30parse-md.sh ] dracut: + . /pre-trigger/30parse-md.sh dracut: + getarg rd_NO_MD dracut: + set +x dracut: + return 0 dracut: + info rd_NO_MD: removing MD RAID activation dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: rd_NO_MD: removing MD RAID activation dracut: + [ yes != yes ] dracut: + udevproperty rd_NO_MD=1 dracut: + [ -z 147 ] dracut: + [ 147 -ge 143 ] dracut: + udevadm control --property=rd_NO_MD=1 dracut: + [ -e /etc/mdadm.conf ] dracut: + getarg rd_NO_MDIMSM dracut: + set +x dracut: + return 1 dracut: + getarg noiswmd dracut: + set +x dracut: + return 1 dracut: + getarg nodmraid dracut: + set +x dracut: + return 1 dracut: + udevadm trigger --action=add dracut: + getarg rdbreak=initqueue dracut: + set +x dracut: + return 1 dracut: + i=0 dracut: + : dracut: + check_finished dracut: + local f dracut: + [ -e /initqueue-finished/block.sh ] dracut: + . /initqueue-finished/block.sh dracut: + [ -e /dev/root ] dracut: + return 1 dracut: + udevsettle dracut: + [ -z 147 ] dracut: + [ 147 -ge 143 ] dracut: + udevadm settle --exit-if-exists=/initqueue/work e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 44 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 44 for MSI/MSI-X e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:32:0e:33 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff ACPI: WMI: Mapper loaded thinkpad_acpi: ThinkPad ACPI Extras v0.24 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 6DET60WW (3.10 ), EC 7XHT22WW-1.04 thinkpad_acpi: Lenovo ThinkPad X200, model 7459H94 thinkpad_acpi: detected a 16-level brightness capable ThinkPad thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. thinkpad_acpi: Console audio control enabled, mode: monitor (read only) input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 alloc irq_desc for 45 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 cfg80211: Calling CRDA to update world regulatory domain iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 46 on node -1 alloc kstat_irqs on node -1 iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) phy0: Selected rate control algorithm 'iwl-agn-rs' iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 47 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 47 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 47 ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 47 ata3: DUMMY ata4: DUMMY ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: ST9160412AS, 0003LVM1, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA ST9160412AS 0003 PQ: 0 ANSI: 5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, MX05, max UDMA/133 ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/133 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MX05 PQ: 0 ANSI: 5 i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 dracut: + check_finished dracut: + local f dracut: + [ -e /initqueue-finished/block.sh ] dracut: + . /initqueue-finished/block.sh dracut: + [ -e /dev/root ] dracut: + return 1 dracut: + [ -f /initqueue/work ] dracut: + rm /initqueue/work dracut: + [ -e /initqueue/cryptroot-ask-sda2.sh ] dracut: + job=/initqueue/cryptroot-ask-sda2.sh . /initqueue/cryptroot-ask-sda2.sh dracut: + [ -e /initqueue/cryptroot-ask-sda2.sh ] dracut: + rm /initqueue/cryptroot-ask-sda2.sh dracut: + /sbin/cryptroot-ask /dev/sda2 luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + luksname=luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + [ /dev/sda2 != /dev/sda2 ] dracut: + device=/dev/sda2 dracut: + [ -f /etc/crypttab ] dracut: + getargs rd_NO_CRYPTTAB dracut: + set +x dracut: + return 1 dracut: + read name dev rest dracut: + [ -z luks-fb264012-c3c0-4582-ab76-23b4454215b3 -o luks-fb264012-c3c0-4582-ab76-23b4454215b3 != luks-fb264012-c3c0-4582-ab76-23b4454215b3 ] dracut: + [ UUID = UUID ] dracut: + [ luks-fb264012-c3c0-4582-ab76-23b4454215b3 = luks-fb264012-c3c0-4582-ab76-23b4454215b3 ] dracut: + luksname=luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + break dracut: + unset name dev rest dracut: + getargs rd_LUKS_UUID= dracut: + set +x dracut: + return 0 dracut: + LUKS=luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + ask=1 dracut: + num=0 dracut: + [ -n luks-fb264012-c3c0-4582-ab76-23b4454215b3 ] dracut: + ask=0 dracut: + luuid=fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + num=1 dracut: + luks=fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + [ != fb264012-c3c0-4582-ab76-23b4454215b3 ] dracut: + ask=1 dracut: + [ 1 -ge 2 -a 1 = 1 ] dracut: luksOpen /dev/sda2 luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + unset LUKS luks luuid dracut: + [ 1 -gt 0 ] dracut: + info luksOpen /dev/sda2 luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + check_quiet dracut: + [ -z ] dracut: + DRACUT_QUIET=yes dracut: + getarg rdinfo dracut: + set +x dracut: + return 1 dracut: + getarg quiet dracut: + set +x dracut: + return 1 dracut: + DRACUT_QUIET=yes dracut: + echo <6>dracut: luksOpen /dev/sda2 luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + [ yes != yes ] dracut: + [ 1 -eq 1 ] dracut: + prompt=Password for filesystem dracut: + flock -s 9 dracut: + /bin/plymouth ask-for-password --prompt Password for filesystem --command=/sbin/cryptsetup luksOpen -T1 /dev/sda2 luks-fb264012-c3c0-4582-ab76-23b4454215b3 padlock: VIA PadLock not detected. Intel AES-NI instructions are not detected. dracut: + unset ask device luksname dracut: + dracut: + udevsettle dracut: + [ -z ] dracut: + udevadm --version dracut: + UDEVVERSION=147 dracut: + [ 147 -ge 143 ] dracut: + udevadm settle --exit-if-exists=/initqueue/work dracut: + exit 0 dracut: + check_finished dracut: + local f dracut: + [ -e /initqueue-finished/block.sh ] dracut: + . /initqueue-finished/block.sh dracut: + [ -e /dev/root ] dracut: + return 1 dracut: + udevadm settle --timeout=0 dracut: + modprobe scsi_wait_scan dracut: + rmmod scsi_wait_scan dracut: + udevadm settle --timeout=0 dracut: + [ -e /initqueue-settled/blocksymlink.sh ] dracut: + job=/initqueue-settled/blocksymlink.sh . /initqueue-settled/blocksymlink.sh dracut: + [ -e /dev/mapper/VolGroup-lv_root ] dracut: + check_finished dracut: + local f dracut: + [ -e /initqueue-finished/block.sh ] dracut: + . /initqueue-finished/block.sh dracut: + [ -e /dev/root ] dracut: + return 1 dracut: + [ -e /initqueue-settled/lvm_scan.sh ] dracut: + job=/initqueue-settled/lvm_scan.sh . /initqueue-settled/lvm_scan.sh dracut: + [ -e /initqueue-settled/lvm_scan.sh ] dracut: + rm /initqueue-settled/lvm_scan.sh dracut: + /sbin/lvm_scan dracut: + getargs rd_LVM_VG= dracut: + set +x dracut: + return 1 dracut: + VGS= dracut: + getargs rd_LVM_LV= dracut: + set +x dracut: + return 0 dracut: + LVS=VolGroup/lv_root dracut: + [ -d /etc/lvm ] dracut: + [ -e /tmp/.lvm_scan-dm-0 ] dracut: + echo -n dm-0 dracut: + lvmdevs=dm-0 dracut: + [ ! -e /etc/lvm/lvm.conf ] dracut: + lvm version dracut: + nopoll= --poll n dracut: + [ -n VolGroup/lv_root ] dracut: + info Scanning devices dm-0 for LVM logical volumes VolGroup/lv_root dracut: + check_quiet dracut: + [ -z ] dracut: + DRACUT_QUIET=yes dracut: + getarg rdinfo dracut: + set +x dracut: + return 1 dracut: Scanning devices dm-0 for LVM logical volumes VolGroup/lv_root dracut: + getarg quiet dracut: + set +x dracut: + return 1 dracut: + DRACUT_QUIET=yes dracut: + echo <6>dracut: Scanning devices dm-0 for LVM logical volumes VolGroup/lv_root dracut: + [ yes != yes ] dracut: + lvm lvscan --ignorelockingfailure dracut: + vinfo dracut: + read line dracut: + info inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: + check_quiet dracut: + [ -z yes ] dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: + echo <6>dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: + [ yes != yes ] dracut: + read line dracut: + info inactive '/dev/VolGroup/lv_home' [94.83 GiB] inherit dracut: inactive '/dev/VolGroup/lv_home' [94.83 GiB] inherit dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: inactive '/dev/VolGroup/lv_home' [94.83 GiB] inherit dracut: + [ yes != yes ] dracut: + read line dracut: + info inactive '/dev/VolGroup/lv_swap' [3.72 GiB] inherit dracut: inactive '/dev/VolGroup/lv_swap' [3.72 GiB] inherit dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: inactive '/dev/VolGroup/lv_swap' [3.72 GiB] inherit dracut: + [ yes != yes ] dracut: + read line dracut: + lvm lvchange -ay --ignorelockingfailure --poll n+ --ignoremonitoringvinfo dracut: + read line dracut: VolGroup/lv_root dracut: + [ -z VolGroup/lv_root -o -n ] dracut: + [ ] dracut: + unset lvmwritten dracut: + check_finished dracut: + local f dracut: + [ -e /initqueue-finished/block.sh ] dracut: + . /initqueue-finished/block.sh dracut: + [ -e /dev/root ] dracut: + return 0 dracut: + break 2 dracut: + unset job dracut: + unset queuetriggered dracut: + getarg rdbreak=pre-mount dracut: + set +x dracut: + return 1 dracut: + source_all pre-mount dracut: + local f dracut: + [ pre-mount ] dracut: + [ -d /pre-mount ] dracut: + return dracut: + getarg rdbreak=mount dracut: + set +x dracut: + return 1 dracut: + i=0 dracut: + : dracut: + [ -d /sysroot/proc ] dracut: + [ -f /mount/10resume.sh ] dracut: + . /mount/10resume.sh dracut: + [ -s /.resume -a -b ] dracut: + [ -d /sysroot/proc ] dracut: + [ -f /mount/99mount-root.sh ] dracut: + . /mount/99mount-root.sh dracut: + . /lib/dracut-lib.sh dracut: + setdebug dracut: + [ -z yes ] dracut: + [ yes = yes ] dracut: + set -x dracut: + [ -n block:/dev/mapper/VolGroup-lv_root -a -z ] dracut: + mount -t auto -o ro /dev/mapper/VolGroup-lv_root /sysroot EXT4-fs (dm-1): INFO: recovery required on readonly filesystem EXT4-fs (dm-1): write access will be enabled during recovery EXT4-fs (dm-1): recovery complete EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) dracut: + ROOTFS_MOUNTED=yes dracut: + getarg rd_NO_FSTAB dracut: + set +x dracut: + return 1 dracut: + getarg rootflags dracut: + set +x dracut: + return 1 dracut: + [ -f /sysroot/etc/fstab ] dracut: + [ -L /sysroot/etc/fstab ] dracut: + rootfs=auto dracut: + rootopts=defaults dracut: + read dev mp fs opts rest dracut: + [ != ] dracut: + [ = / ] dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ != # ] dracut: + continue dracut: + read dev mp fs opts rest dracut: + [ /dev/mapper/VolGroup-lv_root != /dev/mapper/VolGroup-lv_root ] dracut: + [ / = / ] dracut: + rootfs=ext4 dracut: + rootopts=defaults dracut: + break dracut: + filter_rootopts defaults dracut: + rootopts=defaults dracut: + local OLDIFS= dracut: dracut: + IFS=, dracut: + set -- defaults dracut: + IFS= dracut: dracut: + local v dracut: + [ 1 -gt 0 ] dracut: + shift dracut: + [ 0 -gt 0 ] dracut: + rootopts= dracut: + echo dracut: + rootopts= dracut: + [ -n ] dracut: + [ -d /sysroot/proc ] dracut: + break dracut: + i=1 dracut: + [ 1 -gt 20 ] dracut: + : dracut: + [ -d /sysroot/proc ] dracut: + break dracut: + + echo -n Mounted root filesystem dracut: vinfo dracut: + + read lineread dev mp rest dracut: dracut: + [ / = /sysroot ] dracut: + read dev mp rest dracut: + [ /proc = /sysroot ] dracut: + read dev mp rest dracut: + [ /sys = /sysroot ] dracut: + read dev mp rest dracut: + [ /dev = /sysroot ] dracut: + read dev mp rest dracut: + [ /dev/pts = /sysroot ] dracut: + read dev mp rest dracut: + [ /dev/shm = /sysroot ] dracut: + read dev mp rest dracut: + [ /sysroot = /sysroot ] dracut: + echo /dev/mapper/VolGroup-lv_root dracut: + read dev mp rest dracut: + info Mounted root filesystem /dev/mapper/VolGroup-lv_root dracut: + check_quiet dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root dracut: + [ -z yes ] dracut: + echo <6>dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root dracut: + [ yes != yes ] dracut: + read line dracut: + getarg rdbreak=pre-pivot dracut: + set +x dracut: + return 1 dracut: + source_all pre-pivot dracut: + local f dracut: + [ pre-pivot ] dracut: + [ -d /pre-pivot ] dracut: + [ -e /pre-pivot/30crypt-cleanup.sh ] dracut: + . /pre-pivot/30crypt-cleanup.sh dracut: + cryptsetup luksClose /dev/mapper/luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + [ -e /pre-pivot/31crypt-cleanup.sh ] dracut: + . /pre-pivot/31crypt-cleanup.sh dracut: + cryptsetup luksClose /dev/mapper/luks-fb264012-c3c0-4582-ab76-23b4454215b3 dracut: + [ -e /pre-pivot/50selinux-loadpolicy.sh ] dracut: + . /pre-pivot/50selinux-loadpolicy.sh dracut: + rd_load_policy dracut: + getarg selinux=0 dracut: + set +x dracut: + return 1 dracut: + SELINUX=enforcing dracut: + [ -e /sysroot/etc/selinux/config ] dracut: + . /sysroot/etc/selinux/config dracut: + SELINUX=enforcing dracut: + SELINUXTYPE=targeted dracut: + permissive=0 dracut: + getarg enforcing=0 dracut: + set +x dracut: + return 1 dracut: + [ 1 -eq 0 -o enforcing = permissive ] dracut: + [ -x /sysroot/usr/sbin/load_policy -o -x /sysroot/sbin/load_policy ] dracut: Loading SELinux policy dracut: + ret=0 dracut: + info Loading SELinux policy dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: Loading SELinux policy dracut: + [ yes != yes ] dracut: + vinfo dracut: + read line dracut: + info + [ -x /sysroot/sbin/load_policy ] dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: + [ -x /sysroot/sbin/load_policy ] dracut: + [ -x /sysroot/sbin/load_policy ] dracut: + [ yes != yes ] dracut: + read line dracut: + info + chroot /sysroot /sbin/load_policy -i dracut: + chroot /sysroot /sbin/load_policy -i dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: + chroot /sysroot /sbin/load_policy -i dracut: + [ yes != yes ] dracut: + read line type=1404 audit(1279766668.584:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 198429 rules. SELinux: 2048 avtab hash slots, 198429 rules. SELinux: 9 users, 13 roles, 3305 types, 164 bools, 1 sens, 1024 cats SELinux: 77 classes, 198429 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev dm-1, type ext4), uses xattr type=1403 audit(1279766669.412:3): policy loaded auid=4294967295 ses=4294967295 dracut: + info + ret=0 dracut: + check_quiet dracut: + [ -z yes ] dracut: + ret=0 dracut: + echo <6>dracut: + ret=0 dracut: + [ yes != yes ] dracut: + read line dracut: + [ enforcing = disabled ] dracut: + [ 0 -eq 0 -o 0 -eq 2 ] dracut: + [ -e /sysroot/.autorelabel ] dracut: + mount --bind /dev /sysroot/dev dracut: + chroot /sysroot /sbin/restorecon -R /dev dracut: + return 0 dracut: + [ -e /pre-pivot/90plymouth-newroot.sh ] dracut: + . /pre-pivot/90plymouth-newroot.sh dracut: + [ -x /bin/plymouth ] dracut: + /bin/plymouth --newroot=/sysroot dracut: + getarg init= dracut: + set +x dracut: + return 1 dracut: + [ -f /sysroot -a -x /sysroot ] dracut: + [ -f /sysroot/sbin/init -a -x /sysroot/sbin/init ] dracut: + INIT=/sbin/init dracut: + break dracut: + [ /sbin/init ] dracut: + getarg rdbreak dracut: + set +x dracut: + return 1 dracut: + udevadm control --stop-exec-queue dracut: + HARD= dracut: + pidof udevd dracut: + pidof udevd dracut: + kill 362 dracut: + kill 354 dracut: + kill 83 dracut: + HARD=-9 dracut: + pidof udevd dracut: + pidof udevd dracut: + kill -9 354 dracut: + HARD=-9 dracut: + pidof udevd dracut: + export -p dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=HOME='/' dracut: + i=HOME='/' dracut: + i=HOME dracut: + [ HOME = root -o HOME = PATH -o HOME = HOME -o HOME = TERM ] dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=KEYBOARDTYPE='pc' dracut: + i=KEYBOARDTYPE='pc' dracut: + i=KEYBOARDTYPE dracut: + [ KEYBOARDTYPE = root -o KEYBOARDTYPE = PATH -o KEYBOARDTYPE = HOME -o KEYBOARDTYPE = TERM ] dracut: + unset KEYBOARDTYPE dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=KEYTABLE='us' dracut: + i=KEYTABLE='us' dracut: + i=KEYTABLE dracut: + [ KEYTABLE = root -o KEYTABLE = PATH -o KEYTABLE = HOME -o KEYTABLE = TERM ] dracut: + unset KEYTABLE dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=LANG='en_US.UTF-8' dracut: + i=LANG='en_US.UTF-8' dracut: + i=LANG dracut: + [ LANG = root -o LANG = PATH -o LANG = HOME -o LANG = TERM ] dracut: + unset LANG dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=PATH='/sbin:/bin:/usr/sbin:/usr/bin' dracut: + i=PATH='/sbin:/bin:/usr/sbin:/usr/bin' dracut: + i=PATH dracut: + [ PATH = root -o PATH = PATH -o PATH = HOME -o PATH = TERM ] dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=PWD='/' dracut: + i=PWD='/' dracut: + i=PWD dracut: + [ PWD = root -o PWD = PATH -o PWD = HOME -o PWD = TERM ] dracut: + unset PWD dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: Switching root dracut: + unset dracut: + i=SYSFONT='latarcyrheb-sun16' dracut: + i=SYSFONT='latarcyrheb-sun16' dracut: + i=SYSFONT dracut: + [ SYSFONT = root -o SYSFONT = PATH -o SYSFONT = HOME -o SYSFONT = TERM ] dracut: + unset SYSFONT dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=TERM='linux' dracut: + i=TERM='linux' dracut: + i=TERM dracut: + [ TERM = root -o TERM = PATH -o TERM = HOME -o TERM = TERM ] dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=crashkernel='128M' dracut: + i=crashkernel='128M' dracut: + i=crashkernel dracut: + [ crashkernel = root -o crashkernel = PATH -o crashkernel = HOME -o crashkernel = TERM ] dracut: + unset crashkernel dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=rd_LUKS_UUID='luks-fb264012-c3c0-4582-ab76-23b4454215b3' dracut: + i=rd_LUKS_UUID='luks-fb264012-c3c0-4582-ab76-23b4454215b3' dracut: + i=rd_LUKS_UUID dracut: + [ rd_LUKS_UUID = root -o rd_LUKS_UUID = PATH -o rd_LUKS_UUID = HOME -o rd_LUKS_UUID = TERM ] dracut: + unset rd_LUKS_UUID dracut: + i=export dracut: + i= dracut: + i= dracut: + [ = root -o = PATH -o = HOME -o = TERM ] dracut: + unset dracut: + i=rd_LVM_LV='VolGroup/lv_root' dracut: + i=rd_LVM_LV='VolGroup/lv_root' dracut: + i=rd_LVM_LV dracut: + [ rd_LVM_LV = root -o rd_LVM_LV = PATH -o rd_LVM_LV = HOME -o rd_LVM_LV = TERM ] dracut: + unset rd_LVM_LV dracut: + initargs= dracut: + read CLINE dracut: + getarg init= dracut: + set +x dracut: + return 1 dracut: + set ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LUKS_UUID=luks-fb264012-c3c0-4582-ab76-23b4454215b3 rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rdshell rdinitdebug crashkernel=128M 1 dracut: + shift dracut: + initargs= 1 dracut: + getarg rdcopystate dracut: + set +x dracut: + return 1 dracut: + info Switching root dracut: + check_quiet dracut: + [ -z yes ] dracut: + echo <6>dracut: Switching root dracut: + [ yes != yes ] dracut: + wait_for_loginit dracut: + getarg rdinitdebug dracut: + set +x dracut: + return 0 dracut: + set +x udev: starting version 147 WARNING! power/level is deprecated; use power/control instead cfg80211: Calling CRDA for country: CN xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 xhci_hcd 0000:05:00.0: setting latency timer to 64 xhci_hcd 0000:05:00.0: xHCI Host Controller xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9 xhci_hcd 0000:05:00.0: irq 19, io mem 0xf1f00000 usb usb9: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb9: Product: xHCI Host Controller usb usb9: Manufacturer: Linux 2.6.35-rc5 xhci_hcd usb usb9: SerialNumber: 0000:05:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 9-0:1.0: USB hub found hub 9-0:1.0: 4 ports detected usb 9-1: new SuperSpeed USB device using xhci_hcd and address 2 xhci_hcd 0000:05:00.0: WARN: short transfer on control ep xhci_hcd 0000:05:00.0: WARN: short transfer on control ep xhci_hcd 0000:05:00.0: WARN: short transfer on control ep xhci_hcd 0000:05:00.0: WARN: short transfer on control ep usb 9-1: New USB device found, idVendor=1058, idProduct=1123 usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 9-1: Product: My Book 3.0 usb 9-1: Manufacturer: Western Digital usb 9-1: SerialNumber: 574341545230383135353130 input: PC Speaker as /devices/platform/pcspkr/input/input11 cfg80211: Regulatory domain changed to country: CN (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Initializing USB Mass Storage driver... scsi4 : usb-storage 9-1:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky scsi 4:0:0:0: Direct-Access WD My Book 3.0 1123 1006 PQ: 0 ANSI: 4 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:0: [sdb] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) xhci_hcd 0000:05:00.0: WARN: Stalled endpoint sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 0a 00 10 00 sd 4:0:0:0: [sdb] Assuming drive cache: write through xhci_hcd 0000:05:00.0: WARN: Stalled endpoint sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 xhci_hcd 0000:05:00.0: WARN: Stalled endpoint sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Attached SCSI disk EXT4-fs (dm-1): re-mounted. Opts: (null) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) SELinux: initialized (dev sda1, type ext4), uses xattr EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) SELinux: initialized (dev dm-2, type ext4), uses xattr Adding 3899388k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:3899388k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: Microcode Update Driver: v2.00 removed. SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): wlan0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Ebtables v2.0 registered SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts fuse init (API version 7.14) EXT4-fs (sdb1): recovery complete EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) SELinux: initialized (dev sdb1, type ext4), uses xattr wlan0: deauthenticating from 00:1c:f6:62:f3:00 by local choice (reason=3) wlan0: direct probe to 00:1c:f6:62:f1:d0 (try 1) wlan0: direct probe to 00:1c:f6:62:f1:d0 (try 1) wlan0: authenticate with 00:1c:f6:62:f3:00 (try 1) wlan0: authenticated wlan0: associate with 00:1c:f6:62:f3:00 (try 1) wlan0: RX AssocResp from 00:1c:f6:62:f3:00 (capab=0x431 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions lo: Disabled Privacy Extensions e1000e 0000:00:19.0: irq 44 for MSI/MSI-X e1000e 0000:00:19.0: irq 44 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 1(eth0) entering forwarding state br0: port 1(eth0) entering forwarding state br0: no IPv6 routers present eth0: no IPv6 routers present device vnet0 entered promiscuous mode br0: new device vnet0 does not support netpoll (disabling) br0: port 2(vnet0) entering forwarding state br0: port 2(vnet0) entering forwarding state vnet0: no IPv6 routers present kvm: 19605: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 19605: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 19605: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 19605: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 kvm: 19605: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 19605: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 19605: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 19605: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x530079 br0: port 2(vnet0) entering forwarding state device vnet0 left promiscuous mode br0: port 2(vnet0) entering disabled state xhci_hcd 0000:05:00.0: WARN: Stalled endpoint sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sdb2 Ending clean XFS mount for filesystem: sdb2 SELinux: initialized (dev sdb2, type xfs), uses xattr flush-8:16 used greatest stack depth: 2136 bytes left device vnet0 entered promiscuous mode br0: new device vnet0 does not support netpoll (disabling) br0: port 2(vnet0) entering forwarding state br0: port 2(vnet0) entering forwarding state vnet0: no IPv6 routers present kvm: 21822: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 21822: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 21822: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 21822: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 kvm: 21822: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 21822: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 21822: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 21822: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x530079 br0: port 2(vnet0) entering forwarding state device vnet0 left promiscuous mode br0: port 2(vnet0) entering disabled state device vnet0 entered promiscuous mode br0: new device vnet0 does not support netpoll (disabling) br0: port 2(vnet0) entering forwarding state br0: port 2(vnet0) entering forwarding state vnet0: no IPv6 routers present kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x530079 kvm: 23215: cpu0 unhandled wrmsr: 0x198 data 0 kvm: 23215: cpu1 unhandled wrmsr: 0x198 data 0 kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 23215: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0x0 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0xc1 data 0xffdb79de kvm: 23215: cpu1 unimplemented perfctr wrmsr: 0x186 data 0x530079 general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0A:00/power_supply/BAT0/energy_full CPU 0 Modules linked in: xfs exportfs sit tunnel4 fuse ebtable_nat ebtables rfcomm sco bridge stp llc bnep l2cap autofs4 sunrpc xt_physdev ipt_MASQUERADE iptable_nat nf_nat ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm_intel kvm uinput usb_storage sr_mod cdrom pcspkr xhci_hcd ext4 mbcache jbd2 cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt sg sd_mod crc_t10dif i2c_i801 ahci libahci arc4 iTCO_wdt ecb iTCO_vendor_support iwlagn iwlcore mac80211 cfg80211 snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd_page_alloc thinkpad_acpi hwmon snd soundcore wmi e1000e btusb bluetooth rfkill i915 drm_kms_helper drm i2c_algo_bit i2c_core video output dm_mod [last unloaded: microcode] Pid: 1604, comm: cups-polld Not tainted 2.6.35-rc5 #1 7459H94/7459H94 RIP: 0010:[] [] __br_deliver+0x64/0xe0 [bridge] RSP: 0018:ffff880134cbb778 EFLAGS: 00010296 RAX: 5a5a5a5a5a5a5a5a RBX: ffff880035d2c980 RCX: 0000000000000003 RDX: 0000000000001c70 RSI: ffff880125154c98 RDI: 0000000000000000 RBP: ffff880134cbb798 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88012331c288 R13: ffff88012331c2b0 R14: ffff88012e252c16 R15: ffff880035d2c000 FS: 00007ffa879807c0(0000) GS:ffff88000b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f99ba6c5020 CR3: 0000000125c6d000 CR4: 00000000000426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cups-polld (pid: 1604, threadinfo ffff880134cba000, task ffff8801251542d0) Stack: ffff880180000000 ffffffff81098ebd ffff88012331c288 ffff880035d2c980 <0> ffff880134cbb7a8 ffffffffa061cc05 ffff880134cbb7d8 ffffffffa061b7b4 <0> ffff88012331c288 ffffffff81c3e5c0 ffff88012331cac8 ffffffff81c3e600 Call Trace: [] ? lock_release_holdtime+0x3d/0x190 [] br_deliver+0x35/0x40 [bridge] [] br_dev_xmit+0xb4/0x160 [bridge] [] dev_hard_start_xmit+0x2fd/0x450 [] ? dev_hard_start_xmit+0x69/0x450 [] ? get_parent_ip+0x11/0x50 [] dev_queue_xmit+0x4f6/0x7b0 [] ? dev_queue_xmit+0x4f/0x7b0 [] ? trace_hardirqs_on+0xd/0x10 [] ? local_bh_enable_ip+0x97/0x100 [] neigh_resolve_output+0x113/0x3f0 [] ip_finish_output+0x1a4/0x4b0 [] ip_output+0xbb/0x110 [] ip_local_out+0x2d/0x80 [] ip_queue_xmit+0x1c2/0x500 [] ? ip_queue_xmit+0x0/0x500 [] ? __kmalloc_node_track_caller+0x87/0x110 [] ? kmem_cache_alloc_node_notrace+0x10b/0x210 [] ? __kmalloc_node_track_caller+0x87/0x110 [] tcp_transmit_skb+0x3f8/0x8a0 [] tcp_send_ack+0xdd/0x130 [] tcp_cleanup_rbuf+0x76/0x110 [] tcp_recvmsg+0x450/0xd10 [] inet_recvmsg+0xcd/0xf0 [] sock_recvmsg+0xfd/0x130 [] ? sock_sendmsg+0xf3/0x130 [] ? sched_clock+0x9/0x10 [] ? sched_clock_local+0x25/0x90 [] ? sched_clock_cpu+0xb8/0x110 [] ? trace_hardirqs_off+0xd/0x10 [] ? cpu_clock+0x6f/0x80 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? trace_hardirqs_on+0xd/0x10 [] sys_recvfrom+0xe1/0x170 [] ? hrtimer_nanosleep+0x132/0x190 [] ? sysret_check+0x2e/0x69 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: c9 49 c7 c1 90 ca 61 a0 4c 89 e2 be 03 00 00 00 bf 07 00 00 00 c7 04 24 00 00 00 80 e8 96 c6 e1 e0 83 f8 01 74 31 49 8b 44 24 20 <48> 8b 80 08 05 00 00 48 85 c0 74 0e 48 8b 80 d0 01 00 00 48 8b RIP [] __br_deliver+0x64/0xe0 [bridge] RSP ------=_Part_56377_113474362.1279855515400-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/