Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754937Ab0G1Kym (ORCPT ); Wed, 28 Jul 2010 06:54:42 -0400 Received: from smtp02.citrix.com ([66.165.176.63]:19098 "EHLO SMTP02.CITRIX.COM" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754901Ab0G1Kyi (ORCPT ); Wed, 28 Jul 2010 06:54:38 -0400 X-IronPort-AV: E=Sophos;i="4.55,273,1278302400"; d="scan'208";a="107382894" From: Ian Campbell To: linux-kernel@vger.kernel.org Cc: Ian Campbell , Thomas Gleixner , Benjamin Herrenschmidt , Paul Mackerras , Grant Likely , linuxppc-dev@ozlabs.org, devicetree-discuss@lists.ozlabs.org Subject: [PATCH 3/4] powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts Date: Wed, 28 Jul 2010 11:54:26 +0100 Message-Id: <1280314467-5637-3-git-send-email-ian.campbell@citrix.com> X-Mailer: git-send-email 1.5.6.5 In-Reply-To: <1280314445.24292.90.camel@zakaz.uk.xensource.com> References: <1280314445.24292.90.camel@zakaz.uk.xensource.com> X-OriginalArrivalTime: 28 Jul 2010 10:54:37.0224 (UTC) FILETIME=[4566C280:01CB2E43] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2604 Lines: 60 kw_i2c_irq and via_pmu_interrupt are not timer interrupts and therefore should not use IRQF_TIMER. Use the recently introduced IRQF_NO_SUSPEND instead since that is the actual desired behaviour. Signed-off-by: Ian Campbell Cc: Thomas Gleixner Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Grant Likely Cc: linuxppc-dev@ozlabs.org Cc: devicetree-discuss@lists.ozlabs.org --- arch/powerpc/platforms/powermac/low_i2c.c | 4 ++-- drivers/macintosh/via-pmu.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 06a137c..1554d29 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -542,11 +542,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); - /* Request chip interrupt. We set IRQF_TIMER because we don't + /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't * want that interrupt disabled between the 2 passes of driver * suspend or we'll have issues running the pfuncs */ - if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host)) + if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND, "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 3d4fc0f..5c6b5be 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -400,11 +400,11 @@ static int __init via_pmu_start(void) printk(KERN_ERR "via-pmu: can't map interrupt\n"); return -ENODEV; } - /* We set IRQF_TIMER because we don't want the interrupt to be disabled + /* We set IRQF_NO_SUSPEND because we don't want the interrupt to be disabled * between the 2 passes of driver suspend, we control our own disabling * for that one */ - if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) { + if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND, "VIA-PMU", (void *)0)) { printk(KERN_ERR "via-pmu: can't request irq %d\n", irq); return -ENODEV; } -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/