Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757152Ab0HCQko (ORCPT ); Tue, 3 Aug 2010 12:40:44 -0400 Received: from xenotime.net ([72.52.115.56]:48341 "HELO xenotime.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1756696Ab0HCQkn (ORCPT ); Tue, 3 Aug 2010 12:40:43 -0400 Date: Tue, 3 Aug 2010 09:40:31 -0700 From: Randy Dunlap To: Donald Parsons Cc: Stefan Richter , Harald Hoyer , Bjorn Helgaas , linux-kernel , Linus Torvalds Subject: Re: Linux 2.6.35 Message-Id: <20100803094031.2fb8e538.rdunlap@xenotime.net> In-Reply-To: <1280852810.5209.40.camel@falcon.homelinux.org> References: <1280716262.5125.42.camel@falcon.homelinux.org> <201008012138.39036.bjorn.helgaas@hp.com> <1280722876.5125.83.camel@falcon.homelinux.org> <1280802701.5836.10.camel@falcon.homelinux.org> <20100802214249.b0fee617.rdunlap@xenotime.net> <1280852810.5209.40.camel@falcon.homelinux.org> Organization: YPO4 X-Mailer: Sylpheed 2.7.1 (GTK+ 2.16.6; x86_64-unknown-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10583 Lines: 311 On Tue, 03 Aug 2010 12:26:50 -0400 Donald Parsons wrote: > Resending to all... > On Mon, 2010-08-02 at 21:42 -0700, Randy Dunlap wrote: > > On Mon, 02 Aug 2010 22:31:41 -0400 Donald Parsons wrote: > > > > > On Mon, 2010-08-02 at 18:08 +0200, Harald Hoyer wrote: > > > > On Mon, Aug 2, 2010 at 6:21 AM, Donald Parsons wrote: > > > > > On Sun, 2010-08-01 at 21:38 -0600, Bjorn Helgaas wrote: > > > > >> On Sunday, August 01, 2010 08:31:02 pm Donald Parsons wrote: > > > > >> > 2.6.35 still fails to boot for me, as first reported here: > > > > >> > http://lkml.indiana.edu/hypermail/linux/kernel/1007.3/01144.html > > > > >> > > > > > >> > I've manually bisected it down to around May 20 between > > > > >> > 2.6.34-git4 (boots) and 2.6.34-git5 (boot fails) > > > > >> > Also -git[23] boot, and -git8, -rc[126], rc6-git[136] all fail. > > > > >> > > > > > >> > Unfortunately first time I tried was with 2.6.35-rc6 and > > > > >> > it failed to boot. > > > > >> > > > > > >> > Failure when switching from initramfs to real /root? > > > > >> > Removing kernel "quiet" param appears to show several > > > > >> > lines listing: > > > > >> > > > > > >> > usb drives/hubs? followed by > > > > >> > dracut switching root (when booting works) > > > > >> > or > > > > >> > usb drives/hubs? followed by > > > > >> > (missing dracut... line) > > > > >> > No root device found > > > > >> > Boot has failed, sleeping forever. (when it does not boot) > > > > >> > > > > > >> > Grub, typical entry: > > > > >> > title Fedora (2.6.35) > > > > >> > root (hd0,0) > > > > >> > kernel /vmlinuz-2.6.35 ro > > > > >> > root=UUID=686dc496-8814-4c36-8fb7-5ded2916e825 rhgb > > > > >> > SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us > > > > >> > rdblacklist=nouveau init=/sbin/bootchartd > > > > >> > initrd /initramfs-2.6.35.img > > > > >> > > > > > >> > > > > > >> > My boot failure seems to be different than other two reported > > > > >> > in the thread "2.6.35-rc6-git6: Reported regressions from 2.6.34" > > > > >> > under Bug #16173 and #16228 > > > > >> > > > > >> Will it boot with the "pci=nocrs" option? If so, please open a > > > > > > > > > > No, I tried this on a few attempts when I saw it mentioned under > > > > > bug #16228. But it had no effect/benefit. Sorry, I should have > > > > > mentioned this. > > > > > > > > > >> report at https://bugzilla.kernel.org, mark it a regression, assign > > > > >> it to me, and attach the complete dmesg log. And please respond to > > > > >> this thread with a pointer to the bugzilla. > > > > >> > > > > >> Otherwise, a complete console log should have a clue. The best > > > > >> thing would be a log from a serial console or netconsole, with > > > > >> "ignore_loglevel". > > > > > > > > > > Maybe I will try netconsole tomorrow. But is Ethernet up when > > > > > this boot failure happens? I think not, since initramfs should > > > > > not need networking. > > > > > > > > > > Should I try building sata driver into kernel? Oh, I am using > > > > > ext3, and fdisk -l shows: > > > > > > > > # dracut --add-drivers "sata" .... > > > > > > > > or edit /etc/dracut.conf: > > > > > > > > add_drivers+=" sata " > > > > > > But the kernel used to boot with same identical modules before > > > but not after 2.6.34-git4. > > > -------- > > > > > > Using your suggestion as to where the problem lies, I investigated > > > more deeply and found: > > > > > > I've now got 2.6.35-rc6-git3 to boot (and almost certainly 2.6.35 final) > > > > > > Make oldconfig broke at the transition where boot began failed, ie, > > > between 2.6.34-git4 and 2.6.34-git5. Even though modules are the > > > same, boot fails. If I use gconfig and set CONFIG_SATA_AHCI=y > > > instead of CONFIG_SATA_AHCI=m it works, except cannot select =y > > > unless CONFIG_ATA changed from m to y. > > > > > > So at some point in past, make oldconfig had apparently changed > > > CONFIG_SATA_AHCI from y to m and system still booted. But between > > > 2.6.34-git4 and 2.6.34-git5 the ability to boot was lost. > > > > > > So make oldconfig is not 100% trustworthy in this case. I do not > > > know if this is a problem that should be fixed. Ask if you want > > > any .config diffs. > > > > > > I am going to reboot with 2.6.35 to make sure it boots. Yes! > > > > > > I consider this boot problem solved unless someone wants to > > > improve "make oldconfig" behavior. > > > > It would be good to be able to explain what you are seeing & describing, > > so yes, if you can send a .config file that exhibits the problem, I'd > > love to look at it. > > > > thanks, > > --- > > ~Randy > > > Okay, here is the diff between 2.6.34-git4 and 2.6.34-git5 > It should be equivalent to make silentoldconfig as I made no > changes, just enter to accept defaults. The git4 boots and > git5 does not boot. (Both based off 2.6.34.1.config) Yes, I had just generated this same diff. The only config change that could remotely make a difference is: > +# CONFIG_SATA_AHCI_PLATFORM is not set and I don't see how it could matter. > (and attached config-2.6.34-git4.gz, because .config was too > big for mail list last time.) Last time being recently? lkml accepts email sizes (with attachments) up to 300 KB, IIRC. > --- config-2.6.34-git4 2010-08-01 19:52:48.000000000 -0400 > +++ config-2.6.34-git5 2010-08-01 18:10:14.000000000 -0400 > @@ -1,7 +1,7 @@ > # > # Automatically generated make config: don't edit > -# Linux kernel version: 2.6.34-git4 > -# Sun Aug 1 19:52:48 2010 > +# Linux kernel version: 2.6.34-git5 > +# Sun Aug 1 18:10:14 2010 > # > CONFIG_64BIT=y > # CONFIG_X86_32 is not set > @@ -544,7 +544,7 @@ > CONFIG_YENTA_TOSHIBA=y > CONFIG_PD6729=m > CONFIG_I82092=m > -CONFIG_PCCARD_NONSTATIC=m > +CONFIG_PCCARD_NONSTATIC=y > CONFIG_HOTPLUG_PCI=y > CONFIG_HOTPLUG_PCI_FAKE=m > CONFIG_HOTPLUG_PCI_ACPI=m > @@ -1474,7 +1474,9 @@ > CONFIG_ATA_ACPI=y > CONFIG_SATA_PMP=y > CONFIG_SATA_AHCI=m > +# CONFIG_SATA_AHCI_PLATFORM is not set > CONFIG_SATA_SIL24=m > +CONFIG_SATA_INIC162X=m > CONFIG_ATA_SFF=y > CONFIG_SATA_SVW=m > CONFIG_ATA_PIIX=m > @@ -1489,7 +1491,6 @@ > CONFIG_SATA_ULI=m > CONFIG_SATA_VIA=m > CONFIG_SATA_VITESSE=m > -CONFIG_SATA_INIC162X=m > CONFIG_PATA_ACPI=m > CONFIG_PATA_ALI=m > CONFIG_PATA_AMD=m > @@ -1882,6 +1883,7 @@ > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_QT2160 is not set > # CONFIG_KEYBOARD_LKKBD is not set > +# CONFIG_KEYBOARD_TCA6416 is not set > # CONFIG_KEYBOARD_LM8323 is not set > # CONFIG_KEYBOARD_MAX7359 is not set > # CONFIG_KEYBOARD_NEWTON is not set > @@ -1944,6 +1946,7 @@ > # CONFIG_TOUCHSCREEN_AD7879_I2C is not set > # CONFIG_TOUCHSCREEN_AD7879 is not set > # CONFIG_TOUCHSCREEN_DYNAPRO is not set > +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set > # CONFIG_TOUCHSCREEN_EETI is not set > CONFIG_TOUCHSCREEN_FUJITSU=m > CONFIG_TOUCHSCREEN_GUNZE=m > @@ -1977,6 +1980,7 @@ > # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set > # CONFIG_TOUCHSCREEN_TSC2007 is not set > CONFIG_INPUT_MISC=y > +# CONFIG_INPUT_AD714X is not set > CONFIG_INPUT_PCSPKR=m > CONFIG_INPUT_APANEL=m > CONFIG_INPUT_ATLAS_BTNS=m > @@ -1988,6 +1992,7 @@ > # CONFIG_INPUT_CM109 is not set > CONFIG_INPUT_UINPUT=m > # CONFIG_INPUT_WINBOND_CIR is not set > +# CONFIG_INPUT_PCF8574 is not set > > # > # Hardware I/O ports > @@ -2377,7 +2382,6 @@ > # CONFIG_HTC_PASIC3 is not set > # CONFIG_MFD_TMIO is not set > # CONFIG_MFD_WM8400 is not set > -# CONFIG_MFD_WM8994 is not set > # CONFIG_MFD_PCF50633 is not set > # CONFIG_LPC_SCH is not set > # CONFIG_REGULATOR is not set > @@ -2398,6 +2402,13 @@ > # > CONFIG_IR_CORE=m > CONFIG_VIDEO_IR=m > +CONFIG_RC_MAP=m > +CONFIG_IR_NEC_DECODER=m > +CONFIG_IR_RC5_DECODER=m > +CONFIG_IR_RC6_DECODER=m > +CONFIG_IR_JVC_DECODER=m > +CONFIG_IR_SONY_DECODER=m > +# CONFIG_IR_IMON is not set > # CONFIG_MEDIA_ATTACH is not set > CONFIG_MEDIA_TUNER=m > # CONFIG_MEDIA_TUNER_CUSTOMISE is not set > @@ -2416,8 +2427,8 @@ > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set > CONFIG_VIDEO_HELPER_CHIPS_AUTO=y > CONFIG_VIDEO_IR_I2C=m > -# CONFIG_VIDEO_VIVI is not set > # CONFIG_VIDEO_BT848 is not set > +# CONFIG_VIDEO_W9966 is not set > # CONFIG_VIDEO_SAA5246A is not set > # CONFIG_VIDEO_SAA5249 is not set > # CONFIG_VIDEO_ZORAN is not set > @@ -2477,10 +2488,10 @@ > # CONFIG_USB_ET61X251 is not set > # CONFIG_USB_SN9C102 is not set > # CONFIG_USB_ZC0301 is not set > -CONFIG_USB_PWC_INPUT_EVDEV=y > # CONFIG_USB_ZR364XX is not set > # CONFIG_USB_STKWEBCAM is not set > # CONFIG_USB_S2255 is not set > +# CONFIG_V4L_MEM2MEM_DRIVERS is not set > CONFIG_RADIO_ADAPTERS=y > # CONFIG_RADIO_GEMTEK_PCI is not set > # CONFIG_RADIO_MAXIRADIO is not set > @@ -2695,6 +2706,7 @@ > CONFIG_SND_ALS300=m > CONFIG_SND_ALS4000=m > CONFIG_SND_ALI5451=m > +# CONFIG_SND_ASIHPI is not set > CONFIG_SND_ATIIXP=m > CONFIG_SND_ATIIXP_MODEM=m > CONFIG_SND_AU8810=m > @@ -2734,6 +2746,7 @@ > CONFIG_SND_ENS1371=m > CONFIG_SND_ES1938=m > CONFIG_SND_ES1968=m > +# CONFIG_SND_ES1968_INPUT is not set > CONFIG_SND_FM801=m > # CONFIG_SND_FM801_TEA575X_BOOL is not set > CONFIG_SND_HDA_INTEL=m > @@ -2769,6 +2782,7 @@ > CONFIG_SND_KORG1212=m > # CONFIG_SND_LX6464ES is not set > CONFIG_SND_MAESTRO3=m > +# CONFIG_SND_MAESTRO3_INPUT is not set > CONFIG_SND_MIXART=m > CONFIG_SND_NM256=m > CONFIG_SND_PCXHR=m > @@ -3148,10 +3162,6 @@ > # CONFIG_UIO_SERCOS3 is not set > # CONFIG_UIO_PCI_GENERIC is not set > # CONFIG_UIO_NETX is not set > - > -# > -# TI VLYNQ > -# > # CONFIG_STAGING is not set > CONFIG_X86_PLATFORM_DEVICES=y > # CONFIG_ACER_WMI is not set > > ------------------------------------------- > > Can possibly duplicate problem if you have a > sata based PC from last few years. > > Set CONFIG_ATA=m That's already =m in this config file. > and this becomes CONFIG_SATA_AHCI=m (cannot select=y) That's as expected. CONFIG_ATA value controls CONFIG_SATA_AHCI possible values. > > Then 2.6.34.[01] (probably 2 also) will boot. > Make silentoldconfig with this .config and see > that 2.6.35 will not boot. So with CONFIG_ATA=m and CONFIG_SATA_AHCI=m, does 2.6.34-git4 boot but 2.6.34-git5 fails to boot? thanks, --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/