Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754996Ab0HKQqr (ORCPT ); Wed, 11 Aug 2010 12:46:47 -0400 Received: from mail.logicpd.com ([66.162.60.3]:43783 "EHLO smtp.logicpd.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752478Ab0HKQqY (ORCPT ); Wed, 11 Aug 2010 12:46:24 -0400 X-Greylist: delayed 850 seconds by postgrey-1.27 at vger.kernel.org; Wed, 11 Aug 2010 12:46:22 EDT From: Jacob Tanenbaum To: linux@arm.linux.org.uk Cc: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, rmk@arm.linux.org.uk, tony@atomide.com, Jacob Tanenbaum Subject: [PATCH 1/4] initial support for LogicPD's OMAP3 SOM and TORPEDO development kits Date: Wed, 11 Aug 2010 12:31:34 -0400 Message-Id: <1281544297-18015-1-git-send-email-Jacob.Tanenbaum@logicpd.com> X-Mailer: git-send-email 1.6.0.4 X-OriginalArrivalTime: 11 Aug 2010 16:32:11.0074 (UTC) FILETIME=[BF6B8220:01CB3972] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7429 Lines: 260 Adding LogicPD OMAP3 board support Adding support for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Tested against: linux-next 81e09f50c93edff607259cbe374a3006c9c5fa74 Signed-off-by: Jacob Tanenbaum --- arch/arm/configs/omap3_defconfig | 2 + arch/arm/mach-omap2/Kconfig | 8 ++ arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-omap3logic.c | 184 ++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-omap3logic.c diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index 5db9a6b..f510dfd 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -37,6 +37,8 @@ CONFIG_MACH_OMAP_2430SDP=y CONFIG_MACH_OMAP3_BEAGLE=y CONFIG_MACH_DEVKIT8000=y CONFIG_MACH_OMAP_LDP=y +CONFIG_MACH_OMAP3530_LV_SOM=y +CONFIG_MACH_OMAP3_TORPEDO=y CONFIG_MACH_OVERO=y CONFIG_MACH_OMAP3EVM=y CONFIG_MACH_OMAP3517EVM=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b48bacf..42e7d4a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -135,6 +135,14 @@ config MACH_OMAP_LDP default y select OMAP_PACKAGE_CBB +config MACH_OMAP3530_LV_SOM + bool "OMAP3 Logic 3530 LV SOM board" + depends on ARCH_OMAP3 + +config MACH_OMAP3_TORPEDO + bool "OMAP3 Logic 35x Torpedo board" + depends on ARCH_OMAP3 + config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 63b2d88..bc77d32 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -114,6 +114,10 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ board-flash.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \ + hsmmc.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \ + hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c new file mode 100644 index 0000000..b449f9e --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -0,0 +1,184 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3logic.c + * + * Copyright (C) 2010 Li-Pro.Net + * Stephan Linz + * + * Copyright (C) 2010 Logic Product Development, Inc. + * Peter Barada + * + * Modified from Beagle, EVM, and RX51 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include +#include +#include +#include + +#include "mux.h" + +#include +#include +#include +#include +#include +#include + +/* Micron MT46H32M32LF-6 */ +/* FIXME: borrowed from sdram-micron-mt46h32m32lf-6.h because on LogicPD + * boards we can't use the default values -- why? I suspect the reason + * lies in the boot strap code. We correct this part if we have ported + * U-Boot and X-Load. */ + +static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0xaa9db4c6, + .actim_ctrlb = 0x00011517, + .rfr_ctrl = 0x0004e201, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0xaa9db4c6, + .actim_ctrlb = 0x00011517, + .rfr_ctrl = 0x0004e201, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x8a99b481, + .actim_ctrlb = 0x00011312, + .rfr_ctrl = 0x0003de01, + .mr = 0x00000032, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x8a99b481, + .actim_ctrlb = 0x00011312, + .rfr_ctrl = 0x0003de01, + .mr = 0x00000032, + }, + [4] = { + .rate = 0 + }, +}; + +static int omap3logic_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + return 0; +} + +static struct twl4030_gpio_platform_data omap3logic_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) + | BIT(13) | BIT(15) | BIT(16) | BIT(17), + .setup = omap3logic_twl_gpio_setup, +}; + +static struct twl4030_platform_data omap3logic_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &omap3logic_gpio_data, +}; + +static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3logic_twldata, + }, +}; + +static int __init omap3logic_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, + ARRAY_SIZE(omap3logic_i2c_boardinfo)); + return 0; +} + +static struct omap_board_config_kernel omap3logic_config[] __initdata = { +}; + +static void __init omap3logic_init_irq(void) +{ + omap_board_config = omap3logic_config; + omap_board_config_size = ARRAY_SIZE(omap3logic_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + + + +static void __init omap3logic_init(void) +{ + omap3logic_i2c_init(); + omap_serial_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ +/* omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_cfg_reg(SDRC_CKE0); + omap_cfg_reg(SDRC_CKE1); */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3logic_map_io(void) +{ + omap2_set_globals_3xxx(); + omap34xx_map_common_io(); +} +#ifdef CONFIG_MACH_OMAP3_TORPEDO + MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3logic_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, + MACHINE_END +#endif + +#ifdef CONFIG_MACH_OMAP3530_LV_SOM + MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3logic_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, + MACHINE_END +#endif -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/