Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761297Ab0HMDDr (ORCPT ); Thu, 12 Aug 2010 23:03:47 -0400 Received: from stargate.chelsio.com ([67.207.112.58]:5488 "EHLO stargate.chelsio.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753472Ab0HMDDo (ORCPT ); Thu, 12 Aug 2010 23:03:44 -0400 From: kxie@chelsio.com Message-Id: <201008130257.o7D2vLSX001286@localhost.localdomain> Date: Thu, 12 Aug 2010 19:57:21 -0700 To: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, open-iscsi@googlegroups.com Subject: [PATCH v2 3/3] cxgb3i: change cxgb3i to use libcxgbi Cc: rranjan@chelsio.com, kxie@chelsio.com, James.Bottomley@HansenPartnership.com, michaelc@cs.wisc.edu User-Agent: Heirloom mailx 12.4 7/29/08 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 49190 Lines: 1607 [PATCH v2 3/3] cxgb3i: change cxgb3i to use libcxgbi From: Karen Xie Changed cxgb3i to make use of libcxgbi. Signed-off-by: Karen Xie --- drivers/scsi/Kconfig | 1 drivers/scsi/Makefile | 2 drivers/scsi/cxgbi/Kconfig | 1 drivers/scsi/cxgbi/Makefile | 1 drivers/scsi/cxgbi/cxgb3i/Kbuild | 3 drivers/scsi/cxgbi/cxgb3i/Kconfig | 7 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 1454 ++++++++++++++++++++++++++++++++++++ drivers/scsi/cxgbi/cxgb3i/cxgb3i.h | 51 + 8 files changed, 1518 insertions(+), 2 deletions(-) create mode 100644 drivers/scsi/cxgbi/cxgb3i/Kbuild create mode 100644 drivers/scsi/cxgbi/cxgb3i/Kconfig create mode 100644 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c create mode 100644 drivers/scsi/cxgbi/cxgb3i/cxgb3i.h diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index efe66bb..0c85653 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -378,7 +378,6 @@ config ISCSI_BOOT_SYSFS via sysfs to userspace. If you wish to export this information, say Y. Otherwise, say N. -source "drivers/scsi/cxgb3i/Kconfig" source "drivers/scsi/cxgbi/Kconfig" source "drivers/scsi/bnx2i/Kconfig" source "drivers/scsi/be2iscsi/Kconfig" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index cb31f8c..2e9a87e 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -133,7 +133,7 @@ obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_SCSI_STEX) += stex.o obj-$(CONFIG_SCSI_MVSAS) += mvsas/ obj-$(CONFIG_PS3_ROM) += ps3rom.o -obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/ +obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/ obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/ diff --git a/drivers/scsi/cxgbi/Kconfig b/drivers/scsi/cxgbi/Kconfig index a470e38..17eb5d5 100644 --- a/drivers/scsi/cxgbi/Kconfig +++ b/drivers/scsi/cxgbi/Kconfig @@ -1 +1,2 @@ +source "drivers/scsi/cxgbi/cxgb3i/Kconfig" source "drivers/scsi/cxgbi/cxgb4i/Kconfig" diff --git a/drivers/scsi/cxgbi/Makefile b/drivers/scsi/cxgbi/Makefile index 9e8f604..86007e3 100644 --- a/drivers/scsi/cxgbi/Makefile +++ b/drivers/scsi/cxgbi/Makefile @@ -1 +1,2 @@ +obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libcxgbi.o cxgb3i/ obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libcxgbi.o cxgb4i/ diff --git a/drivers/scsi/cxgbi/cxgb3i/Kbuild b/drivers/scsi/cxgbi/cxgb3i/Kbuild new file mode 100644 index 0000000..09dbf9e --- /dev/null +++ b/drivers/scsi/cxgbi/cxgb3i/Kbuild @@ -0,0 +1,3 @@ +EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3 + +obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o diff --git a/drivers/scsi/cxgbi/cxgb3i/Kconfig b/drivers/scsi/cxgbi/cxgb3i/Kconfig new file mode 100644 index 0000000..5cf4e98 --- /dev/null +++ b/drivers/scsi/cxgbi/cxgb3i/Kconfig @@ -0,0 +1,7 @@ +config SCSI_CXGB3_ISCSI + tristate "Chelsio T3 iSCSI support" + depends on CHELSIO_T3_DEPENDS + select CHELSIO_T3 + select SCSI_ISCSI_ATTRS + ---help--- + This driver supports iSCSI offload for the Chelsio T3 devices. diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c new file mode 100644 index 0000000..6cd9bd6 --- /dev/null +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c @@ -0,0 +1,1454 @@ +/* + * cxgb3i.c: Chelsio S3xx iscsi offload driver + * + * Copyright (C) 2003-2008 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + * + * Written by: Dimitris Michailidis (dm@chelsio.com) + * Karen Xie (kxie@chelsio.com) + */ + +#include +#include +#include +#include + +#include "common.h" +#include "t3_cpl.h" +#include "t3cdev.h" +#include "cxgb3_defs.h" +#include "cxgb3_ctl_defs.h" +#include "cxgb3_offload.h" +#include "firmware_exports.h" +#include "cxgb3i.h" + +static unsigned int dbg_level; +#include "../libcxgbi.h" + +#define DRV_MODULE_NAME "cxgb3i" +#define DRV_MODULE_DESC "Chelsio T3 iSCSI Driver" +#define DRV_MODULE_VERSION "2.0.0" +#define DRV_MODULE_RELDATE "Jun. 2010" + +static char version[] = + DRV_MODULE_DESC " " DRV_MODULE_NAME + " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Chelsio Communications, Inc."); +MODULE_DESCRIPTION(DRV_MODULE_DESC); +MODULE_VERSION(DRV_MODULE_VERSION); +MODULE_LICENSE("GPL"); + +module_param(dbg_level, uint, 0644); +MODULE_PARM_DESC(dbg_level, "debug flag (default=0)"); + +static int cxgb3i_rcv_win = 256 * 1024; +module_param(cxgb3i_rcv_win, int, 0644); +MODULE_PARM_DESC(cxgb3i_rcv_win, "TCP receive window in bytes (default=256KB)"); + +static int cxgb3i_snd_win = 128 * 1024; +module_param(cxgb3i_snd_win, int, 0644); +MODULE_PARM_DESC(cxgb3i_snd_win, "TCP send window in bytes (default=128KB)"); + +static int cxgb3i_rx_credit_thres = 10 * 1024; +module_param(cxgb3i_rx_credit_thres, int, 0644); +MODULE_PARM_DESC(rx_credit_thres, + "RX credits return threshold in bytes (default=10KB)"); + +static unsigned int cxgb3i_max_connect = 8 * 1024; +module_param(cxgb3i_max_connect, uint, 0644); +MODULE_PARM_DESC(cxgb3i_max_connect, "Max. # of connections (default=8092)"); + +static unsigned int cxgb3i_sport_base = 20000; +module_param(cxgb3i_sport_base, uint, 0644); +MODULE_PARM_DESC(cxgb3i_sport_base, "starting port number (default=20000)"); + +#define cxgb3i_log_error cxgbi_dbg_error +#define cxgb3i_log_warn cxgbi_dbg_warn +#define cxgb3i_log_info cxgbi_dbg_info +#define cxgb3i_log_debug(flag, fmt, args...) \ + cxgbi_dbg_print(flag, fmt, ## args) + +static void cxgb3i_dev_open(struct t3cdev *); +static void cxgb3i_dev_close(struct t3cdev *); +static void cxgb3i_dev_event_handler(struct t3cdev *, u32, u32); + +static struct cxgb3_client t3_client = { + .name = DRV_MODULE_NAME, + .handlers = cxgb3i_cpl_handlers, + .add = cxgb3i_dev_open, + .remove = cxgb3i_dev_close, + .event_handler = cxgb3i_dev_event_handler, +}; + +static struct scsi_host_template cxgb3i_host_template = { + .module = THIS_MODULE, + .name = DRV_MODULE_NAME, + .proc_name = DRV_MODULE_NAME, + .can_queue = CXGB3I_SCSI_HOST_QDEPTH, + .queuecommand = iscsi_queuecommand, + .change_queue_depth = iscsi_change_queue_depth, + .sg_tablesize = SG_ALL, + .max_sectors = 0xFFFF, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, + .eh_abort_handler = iscsi_eh_abort, + .eh_device_reset_handler = iscsi_eh_device_reset, + .eh_target_reset_handler = iscsi_eh_recover_target, + .target_alloc = iscsi_target_alloc, + .use_clustering = DISABLE_CLUSTERING, + .this_id = -1, +}; + +static struct iscsi_transport cxgb3i_iscsi_transport = { + .owner = THIS_MODULE, + .name = DRV_MODULE_NAME, + /* owner and name should be set already */ + .caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST + | CAP_DATADGST | CAP_DIGEST_OFFLOAD | + CAP_PADDING_OFFLOAD, + .param_mask = ISCSI_MAX_RECV_DLENGTH | ISCSI_MAX_XMIT_DLENGTH | + ISCSI_HDRDGST_EN | ISCSI_DATADGST_EN | + ISCSI_INITIAL_R2T_EN | ISCSI_MAX_R2T | + ISCSI_IMM_DATA_EN | ISCSI_FIRST_BURST | + ISCSI_MAX_BURST | ISCSI_PDU_INORDER_EN | + ISCSI_DATASEQ_INORDER_EN | ISCSI_ERL | + ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS | + ISCSI_EXP_STATSN | ISCSI_PERSISTENT_PORT | + ISCSI_PERSISTENT_ADDRESS | + ISCSI_TARGET_NAME | ISCSI_TPGT | + ISCSI_USERNAME | ISCSI_PASSWORD | + ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN | + ISCSI_FAST_ABORT | ISCSI_ABORT_TMO | + ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO | + ISCSI_PING_TMO | ISCSI_RECV_TMO | + ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME, + .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS | + ISCSI_HOST_INITIATOR_NAME | + ISCSI_HOST_NETDEV_NAME, + .get_host_param = cxgbi_get_host_param, + .set_host_param = cxgbi_set_host_param, + /* session management */ + .create_session = cxgbi_create_session, + .destroy_session = cxgbi_destroy_session, + .get_session_param = iscsi_session_get_param, + /* connection management */ + .create_conn = cxgbi_create_conn, + .bind_conn = cxgbi_bind_conn, + .destroy_conn = iscsi_tcp_conn_teardown, + .start_conn = iscsi_conn_start, + .stop_conn = iscsi_conn_stop, + .get_conn_param = cxgbi_get_conn_param, + .set_param = cxgbi_set_conn_param, + .get_stats = cxgbi_get_conn_stats, + /* pdu xmit req from user space */ + .send_pdu = iscsi_conn_send_pdu, + /* task */ + .init_task = iscsi_tcp_task_init, + .xmit_task = iscsi_tcp_task_xmit, + .cleanup_task = cxgbi_cleanup_task, + /* pdu */ + .alloc_pdu = cxgbi_conn_alloc_pdu, + .init_pdu = cxgbi_conn_init_pdu, + .xmit_pdu = cxgbi_conn_xmit_pdu, + .parse_pdu_itt = cxgbi_parse_pdu_itt, + /* TCP connect/disconnect */ + .ep_connect = cxgbi_ep_connect, + .ep_poll = cxgbi_ep_poll, + .ep_disconnect = cxgbi_ep_disconnect, + /* Error recovery timeout call */ + .session_recovery_timedout = iscsi_session_recovery_timedout, +}; + +static struct scsi_transport_template *cxgb3i_stt; + +/* + * CPL (Chelsio Protocol Language) defines a message passing interface between + * the host driver and Chelsio asic. + * The section below implments CPLs that related to iscsi tcp connection + * open/close/abort and data send/receive. + */ + +static int push_tx_frames(struct cxgbi_sock *csk, int req_completion); + +static void send_act_open_req(struct cxgbi_sock *csk, struct sk_buff *skb, + const struct l2t_entry *e) +{ + unsigned int wscale = cxgbi_sock_compute_wscale(cxgb3i_rcv_win); + struct cpl_act_open_req *req = (struct cpl_act_open_req *)skb->head; + + skb->priority = CPL_PRIORITY_SETUP; + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, csk->atid)); + req->local_port = csk->saddr.sin_port; + req->peer_port = csk->daddr.sin_port; + req->local_ip = csk->saddr.sin_addr.s_addr; + req->peer_ip = csk->daddr.sin_addr.s_addr; + + req->opt0h = htonl(V_KEEP_ALIVE(1) | F_TCAM_BYPASS | + V_WND_SCALE(wscale) | V_MSS_IDX(csk->mss_idx) | + V_L2T_IDX(e->idx) | V_TX_CHANNEL(e->smt_idx)); + req->opt0l = htonl(V_ULP_MODE(ULP2_MODE_ISCSI) | + V_RCV_BUFSIZ(cxgb3i_rcv_win>>10)); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, %pI4:%u-%pI4:%u, %u,%u,%u.\n", + csk, csk->state, csk->flags, csk->atid, + &req->local_ip, ntohs(req->local_port), + &req->peer_ip, ntohs(req->peer_port), + csk->mss_idx, e->idx, e->smt_idx); + + l2t_send(csk->cdev->lldev, skb, csk->l2t); +} + +static inline void act_open_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + cxgbi_sock_act_open_req_arp_failure(NULL, skb); +} + +/* + * CPL connection close request: host -> + * + * Close a connection by sending a CPL_CLOSE_CON_REQ message and queue it to + * the write queue (i.e., after any unsent txt data). + */ +static void send_close_req(struct cxgbi_sock *csk) +{ + struct sk_buff *skb = csk->cpl_close; + struct cpl_close_con_req *req = (struct cpl_close_con_req *)skb->head; + unsigned int tid = csk->tid; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u.\n", + csk, csk->state, csk->flags, csk->tid); + + csk->cpl_close = NULL; + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); + req->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, tid)); + req->rsvd = htonl(csk->write_seq); + + cxgbi_sock_skb_entail(csk, skb); + if (csk->state >= CTP_ESTABLISHED) + push_tx_frames(csk, 1); +} + +/* + * CPL connection abort request: host -> + * + * Send an ABORT_REQ message. Makes sure we do not send multiple ABORT_REQs + * for the same connection and also that we do not try to send a message + * after the connection has closed. + */ +static void abort_arp_failure(struct t3cdev *tdev, struct sk_buff *skb) +{ + struct cpl_abort_req *req = cplhdr(skb); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "t3dev 0x%p, tid %u, skb 0x%p.\n", + tdev, GET_TID(req), skb); + req->cmd = CPL_ABORT_NO_RST; + cxgb3_ofld_send(tdev, skb); +} + +static void send_abort_req(struct cxgbi_sock *csk) +{ + struct sk_buff *skb = csk->cpl_abort_req; + struct cpl_abort_req *req; + + if (unlikely(csk->state == CTP_ABORTING || !skb)) + return; + cxgbi_sock_set_state(csk, CTP_ABORTING); + cxgbi_sock_set_flag(csk, CTPF_ABORT_RPL_PENDING); + /* Purge the send queue so we don't send anything after an abort. */ + cxgbi_sock_purge_write_queue(csk); + + csk->cpl_abort_req = NULL; + req = (struct cpl_abort_req *)skb->head; + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, abort_arp_failure); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); + req->wr.wr_lo = htonl(V_WR_TID(csk->tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, csk->tid)); + req->rsvd0 = htonl(csk->snd_nxt); + req->rsvd1 = !cxgbi_sock_flag(csk, CTPF_TX_DATA_SENT); + req->cmd = CPL_ABORT_SEND_RST; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, snd_nxt %u, 0x%x.\n", + csk, csk->state, csk->flags, csk->tid, csk->snd_nxt, + req->rsvd1); + + l2t_send(csk->cdev->lldev, skb, csk->l2t); +} + +/* + * CPL connection abort reply: host -> + * + * Send an ABORT_RPL message in response of the ABORT_REQ received. + */ +static void send_abort_rpl(struct cxgbi_sock *csk, int rst_status) +{ + struct sk_buff *skb = csk->cpl_abort_rpl; + struct cpl_abort_rpl *rpl = (struct cpl_abort_rpl *)skb->head; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, status %d.\n", + csk, csk->state, csk->flags, csk->tid, rst_status); + + csk->cpl_abort_rpl = NULL; + skb->priority = CPL_PRIORITY_DATA; + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(csk->tid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, csk->tid)); + rpl->cmd = rst_status; + cxgb3_ofld_send(csk->cdev->lldev, skb); +} + +/* + * CPL connection rx data ack: host -> + * Send RX credits through an RX_DATA_ACK CPL message. Returns the number of + * credits sent. + */ +static u32 send_rx_credits(struct cxgbi_sock *csk, u32 credits) +{ + struct sk_buff *skb; + struct cpl_rx_data_ack *req; + u32 dack = F_RX_DACK_CHANGE | V_RX_DACK_MODE(1); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_RX, + "csk 0x%p,%u,0x%lx,%u, credit %u, dack %u\n", + csk, csk->state, csk->flags, csk->tid, credits, dack); + + skb = alloc_cpl(sizeof(*req), 0, GFP_ATOMIC); + if (!skb) { + cxgb3i_log_info("csk 0x%p, credit %u, OOM.\n", csk, credits); + return 0; + } + req = (struct cpl_rx_data_ack *)skb->head; + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, csk->tid)); + req->credit_dack = htonl(F_RX_DACK_CHANGE | V_RX_DACK_MODE(1) | + V_RX_CREDITS(credits)); + skb->priority = CPL_PRIORITY_ACK; + cxgb3_ofld_send(csk->cdev->lldev, skb); + return credits; +} + +/* + * CPL connection tx data: host -> + * + * Send iscsi PDU via TX_DATA CPL message. Returns the number of + * credits sent. + * Each TX_DATA consumes work request credit (wrs), so we need to keep track of + * how many we've used so far and how many are pending (i.e., yet ack'ed by T3). + */ + +static unsigned int wrlen __read_mostly; +static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly; + +static void init_wr_tab(unsigned int wr_len) +{ + int i; + + if (skb_wrs[1]) /* already initialized */ + return; + for (i = 1; i < SKB_WR_LIST_SIZE; i++) { + int sgl_len = (3 * i) / 2 + (i & 1); + + sgl_len += 3; + skb_wrs[i] = (sgl_len <= wr_len + ? 1 : 1 + (sgl_len - 2) / (wr_len - 1)); + } + wrlen = wr_len * 8; +} + +static inline void make_tx_data_wr(struct cxgbi_sock *csk, struct sk_buff *skb, + int len, int req_completion) +{ + struct tx_data_wr *req; + struct l2t_entry *l2t = csk->l2t; + + skb_reset_transport_header(skb); + req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) | + (req_completion ? F_WR_COMPL : 0)); + req->wr_lo = htonl(V_WR_TID(csk->tid)); + /* len includes the length of any HW ULP additions */ + req->len = htonl(len); + /* V_TX_ULP_SUBMODE sets both the mode and submode */ + req->flags = htonl(V_TX_ULP_SUBMODE(cxgbi_skcb_ulp_mode(skb)) | + V_TX_SHOVE((skb_peek(&csk->write_queue) ? 0 : 1))); + req->sndseq = htonl(csk->snd_nxt); + req->param = htonl(V_TX_PORT(l2t->smt_idx)); + + if (!cxgbi_sock_flag(csk, CTPF_TX_DATA_SENT)) { + req->flags |= htonl(V_TX_ACK_PAGES(2) | F_TX_INIT | + V_TX_CPU_IDX(csk->rss_qid)); + /* sendbuffer is in units of 32KB. */ + req->param |= htonl(V_TX_SNDBUF(cxgb3i_snd_win >> 15)); + cxgbi_sock_set_flag(csk, CTPF_TX_DATA_SENT); + } +} + +/** + * push_tx_frames -- start transmit + * @c3cn: the offloaded connection + * @req_completion: request wr_ack or not + * + * Prepends TX_DATA_WR or CPL_CLOSE_CON_REQ headers to buffers waiting in a + * connection's send queue and sends them on to T3. Must be called with the + * connection's lock held. Returns the amount of send buffer space that was + * freed as a result of sending queued data to T3. + */ + +static void arp_failure_skb_discard(struct t3cdev *dev, struct sk_buff *skb) +{ + kfree_skb(skb); +} + +static int push_tx_frames(struct cxgbi_sock *csk, int req_completion) +{ + int total_size = 0; + struct sk_buff *skb; + + if (unlikely(csk->state < CTP_ESTABLISHED || + csk->state == CTP_CLOSE_WAIT_1 || csk->state >= CTP_ABORTING)) { + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | + 1 << CXGBI_DBG_PDU_TX, + "csk 0x%p,%u,0x%lx,%u, in closing state.\n", + csk, csk->state, csk->flags, csk->tid); + return 0; + } + + while (csk->wr_cred && (skb = skb_peek(&csk->write_queue)) != NULL) { + int len = skb->len; /* length before skb_push */ + int frags = skb_shinfo(skb)->nr_frags + (len != skb->data_len); + int wrs_needed = skb_wrs[frags]; + + if (wrs_needed > 1 && len + sizeof(struct tx_data_wr) <= wrlen) + wrs_needed = 1; + + WARN_ON(frags >= SKB_WR_LIST_SIZE || wrs_needed < 1); + + if (csk->wr_cred < wrs_needed) { + cxgb3i_log_debug(1 << CXGBI_DBG_PDU_TX, + "csk 0x%p, skb len %u/%u, frag %u, " + "wr %d < %u.\n", + csk, skb->len, skb->data_len, frags, + wrs_needed, csk->wr_cred); + break; + } + + __skb_unlink(skb, &csk->write_queue); + skb->priority = CPL_PRIORITY_DATA; + skb->csum = wrs_needed; /* remember this until the WR_ACK */ + csk->wr_cred -= wrs_needed; + csk->wr_una_cred += wrs_needed; + cxgbi_sock_enqueue_wr(csk, skb); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_TX, + "csk 0x%p, enqueue, skb len %u/%u, frag %u, " + "wr %d, left %u, unack %u.\n", + csk, skb->len, skb->data_len, frags, + skb->csum, csk->wr_cred, csk->wr_una_cred); + + if (likely(cxgbi_skcb_test_flag(skb, SKCBF_TX_NEED_HDR))) { + if ((req_completion && + csk->wr_una_cred == wrs_needed) || + csk->wr_una_cred >= csk->wr_max_cred / 2) { + req_completion = 1; + csk->wr_una_cred = 0; + } + len += cxgbi_ulp_extra_len(cxgbi_skcb_ulp_mode(skb)); + make_tx_data_wr(csk, skb, len, req_completion); + csk->snd_nxt += len; + cxgbi_skcb_clear_flag(skb, SKCBF_TX_NEED_HDR); + } + total_size += skb->truesize; + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_TX, + "csk 0x%p, tid 0x%x, send skb 0x%p.\n", + csk, csk->tid, skb); + set_arp_failure_handler(skb, arp_failure_skb_discard); + l2t_send(csk->cdev->lldev, skb, csk->l2t); + } + return total_size; +} + +/* + * Process a CPL_ACT_ESTABLISH message: -> host + * Updates connection state from an active establish CPL message. Runs with + * the connection lock held. + */ + +static inline void free_atid(struct cxgbi_sock *csk) +{ + if (cxgbi_sock_flag(csk, CTPF_HAS_ATID)) { + cxgb3_free_atid(csk->cdev->lldev, csk->atid); + cxgbi_sock_clear_flag(csk, CTPF_HAS_ATID); + cxgbi_sock_put(csk); + } +} + +static int do_act_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cxgbi_sock *csk = ctx; + struct cpl_act_establish *req = cplhdr(skb); + unsigned int tid = GET_TID(req); + unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + u32 rcv_isn = ntohl(req->rcv_isn); /* real RCV_ISN + 1 */ + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "atid 0x%x,tid 0x%x, csk 0x%p,%u,0x%lx, isn %u.\n", + atid, atid, csk, csk->state, csk->flags, rcv_isn); + + cxgbi_sock_get(csk); + cxgbi_sock_set_flag(csk, CTPF_HAS_TID); + csk->tid = tid; + cxgb3_insert_tid(csk->cdev->lldev, &t3_client, csk, tid); + + free_atid(csk); + + csk->rss_qid = G_QNUM(ntohs(skb->csum)); + + spin_lock_bh(&csk->lock); + if (csk->retry_timer.function) { + del_timer(&csk->retry_timer); + csk->retry_timer.function = NULL; + } + + if (unlikely(csk->state != CTP_ACTIVE_OPEN)) + cxgb3i_log_info("csk 0x%p,%u,0x%lx,%u, got EST.\n", + csk, csk->state, csk->flags, csk->tid); + + csk->copied_seq = csk->rcv_wup = csk->rcv_nxt = rcv_isn; + if (cxgb3i_rcv_win > (M_RCV_BUFSIZ << 10)) + csk->rcv_wup -= cxgb3i_rcv_win - (M_RCV_BUFSIZ << 10); + + cxgbi_sock_established(csk, ntohl(req->snd_isn), ntohs(req->tcp_opt)); + + if (unlikely(cxgbi_sock_flag(csk, CTPF_ACTIVE_CLOSE_NEEDED))) + /* upper layer has requested closing */ + send_abort_req(csk); + else { + if (skb_queue_len(&csk->write_queue)) + push_tx_frames(csk, 1); + cxgbi_conn_tx_open(csk); + } + + spin_unlock_bh(&csk->lock); + __kfree_skb(skb); + return 0; +} + +/* + * Process a CPL_ACT_OPEN_RPL message: -> host + * Handle active open failures. + */ +static int act_open_rpl_status_to_errno(int status) +{ + switch (status) { + case CPL_ERR_CONN_RESET: + return -ECONNREFUSED; + case CPL_ERR_ARP_MISS: + return -EHOSTUNREACH; + case CPL_ERR_CONN_TIMEDOUT: + return -ETIMEDOUT; + case CPL_ERR_TCAM_FULL: + return -ENOMEM; + case CPL_ERR_CONN_EXIST: + return -EADDRINUSE; + default: + return -EIO; + } +} + +static void act_open_retry_timer(unsigned long data) +{ + struct sk_buff *skb; + struct cxgbi_sock *csk = (struct cxgbi_sock *)data; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u.\n", + csk, csk->state, csk->flags, csk->tid); + + cxgbi_sock_get(csk); + spin_lock_bh(&csk->lock); + skb = alloc_cpl(sizeof(struct cpl_act_open_req), 0, GFP_ATOMIC); + if (!skb) + cxgbi_sock_fail_act_open(csk, -ENOMEM); + else { + skb->sk = (struct sock *)csk; + set_arp_failure_handler(skb, act_open_arp_failure); + send_act_open_req(csk, skb, csk->l2t); + } + spin_unlock_bh(&csk->lock); + cxgbi_sock_put(csk); +} + +static int do_act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cxgbi_sock *csk = ctx; + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, status %u.\n", + csk, csk->state, csk->flags, csk->atid, rpl->status); + + if (rpl->status != CPL_ERR_TCAM_FULL && + rpl->status != CPL_ERR_CONN_EXIST && + rpl->status != CPL_ERR_ARP_MISS) + cxgb3_queue_tid_release(tdev, GET_TID(rpl)); + + cxgbi_sock_get(csk); + spin_lock_bh(&csk->lock); + if (rpl->status == CPL_ERR_CONN_EXIST && + csk->retry_timer.function != act_open_retry_timer) { + csk->retry_timer.function = act_open_retry_timer; + mod_timer(&csk->retry_timer, jiffies + HZ / 2); + } else + cxgbi_sock_fail_act_open(csk, + act_open_rpl_status_to_errno(rpl->status)); + + spin_unlock_bh(&csk->lock); + cxgbi_sock_put(csk); + __kfree_skb(skb); + return 0; +} + +/* + * Process PEER_CLOSE CPL messages: -> host + * Handle peer FIN. + */ +static int do_peer_close(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct cxgbi_sock *csk = ctx; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u.\n", + csk, csk->state, csk->flags, csk->tid); + + cxgbi_sock_rcv_peer_close(csk); + __kfree_skb(skb); + return 0; +} + +/* + * Process CLOSE_CONN_RPL CPL message: -> host + * Process a peer ACK to our FIN. + */ +static int do_close_con_rpl(struct t3cdev *cdev, struct sk_buff *skb, + void *ctx) +{ + struct cxgbi_sock *csk = ctx; + struct cpl_close_con_rpl *rpl = cplhdr(skb); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, snxt %u.\n", + csk, csk->state, csk->flags, csk->tid, + ntohl(rpl->snd_nxt)); + + cxgbi_sock_rcv_close_conn_rpl(csk, ntohl(rpl->snd_nxt)); + __kfree_skb(skb); + return 0; +} + +/* + * Process ABORT_REQ_RSS CPL message: -> host + * Process abort requests. If we are waiting for an ABORT_RPL we ignore this + * request except that we need to reply to it. + */ + +static int abort_status_to_errno(struct cxgbi_sock *csk, int abort_reason, + int *need_rst) +{ + switch (abort_reason) { + case CPL_ERR_BAD_SYN: /* fall through */ + case CPL_ERR_CONN_RESET: + return csk->state > CTP_ESTABLISHED ? + -EPIPE : -ECONNRESET; + case CPL_ERR_XMIT_TIMEDOUT: + case CPL_ERR_PERSIST_TIMEDOUT: + case CPL_ERR_FINWAIT2_TIMEDOUT: + case CPL_ERR_KEEPALIVE_TIMEDOUT: + return -ETIMEDOUT; + default: + return -EIO; + } +} + +static int do_abort_req(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + const struct cpl_abort_req_rss *req = cplhdr(skb); + struct cxgbi_sock *csk = ctx; + int rst_status = CPL_ABORT_NO_RST; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u.\n", + csk, csk->state, csk->flags, csk->tid); + + if (req->status == CPL_ERR_RTX_NEG_ADVICE || + req->status == CPL_ERR_PERSIST_NEG_ADVICE) { + goto done; + } + + cxgbi_sock_get(csk); + spin_lock_bh(&csk->lock); + + if (!cxgbi_sock_flag(csk, CTPF_ABORT_REQ_RCVD)) { + cxgbi_sock_set_flag(csk, CTPF_ABORT_REQ_RCVD); + cxgbi_sock_set_state(csk, CTP_ABORTING); + goto out; + } + + cxgbi_sock_clear_flag(csk, CTPF_ABORT_REQ_RCVD); + send_abort_rpl(csk, rst_status); + + if (!cxgbi_sock_flag(csk, CTPF_ABORT_RPL_PENDING)) { + csk->err = abort_status_to_errno(csk, req->status, &rst_status); + cxgbi_sock_closed(csk); + } + +out: + spin_unlock_bh(&csk->lock); + cxgbi_sock_put(csk); +done: + __kfree_skb(skb); + return 0; +} + +/* + * Process ABORT_RPL_RSS CPL message: -> host + * Process abort replies. We only process these messages if we anticipate + * them as the coordination between SW and HW in this area is somewhat lacking + * and sometimes we get ABORT_RPLs after we are done with the connection that + * originated the ABORT_REQ. + */ +static int do_abort_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_abort_rpl_rss *rpl = cplhdr(skb); + struct cxgbi_sock *csk = ctx; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "status 0x%x, csk 0x%p, s %u, 0x%lx.\n", + rpl->status, csk, csk ? csk->state : 0, + csk ? csk->flags : 0UL); + /* + * Ignore replies to post-close aborts indicating that the abort was + * requested too late. These connections are terminated when we get + * PEER_CLOSE or CLOSE_CON_RPL and by the time the abort_rpl_rss + * arrives the TID is either no longer used or it has been recycled. + */ + if (rpl->status == CPL_ERR_ABORT_FAILED) + goto rel_skb; + /* + * Sometimes we've already closed the connection, e.g., a post-close + * abort races with ABORT_REQ_RSS, the latter frees the connection + * expecting the ABORT_REQ will fail with CPL_ERR_ABORT_FAILED, + * but FW turns the ABORT_REQ into a regular one and so we get + * ABORT_RPL_RSS with status 0 and no connection. + */ + if (csk) + cxgbi_sock_rcv_abort_rpl(csk); +rel_skb: + __kfree_skb(skb); + return 0; +} + +/* + * Process RX_ISCSI_HDR CPL message: -> host + * Handle received PDUs, the payload could be DDP'ed. If not, the payload + * follow after the bhs. + */ +static int do_iscsi_hdr(struct t3cdev *t3dev, struct sk_buff *skb, void *ctx) +{ + struct cxgbi_sock *csk = ctx; + struct cpl_iscsi_hdr *hdr_cpl = cplhdr(skb); + struct cpl_iscsi_hdr_norss data_cpl; + struct cpl_rx_data_ddp_norss ddp_cpl; + unsigned int hdr_len, data_len, status; + unsigned int len; + int err; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_RX, + "csk 0x%p,%u,0x%lx,%u, skb 0x%p,%u.\n", + csk, csk->state, csk->flags, csk->tid, skb, skb->len); + + spin_lock_bh(&csk->lock); + + if (unlikely(csk->state >= CTP_PASSIVE_CLOSE)) { + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u, bad state.\n", + csk, csk->state, csk->flags, csk->tid); + if (csk->state != CTP_ABORTING) + goto abort_conn; + else + goto discard; + } + + cxgbi_skcb_tcp_seq(skb) = ntohl(hdr_cpl->seq); + cxgbi_skcb_flags(skb) = 0; + + skb_reset_transport_header(skb); + __skb_pull(skb, sizeof(struct cpl_iscsi_hdr)); + + len = hdr_len = ntohs(hdr_cpl->len); + /* msg coalesce is off or not enough data received */ + if (skb->len <= hdr_len) { + cxgb3i_log_error("%s: TID %u, ISCSI_HDR, skb len %u < %u.\n", + csk->cdev->ports[csk->port_id]->name, + csk->tid, skb->len, hdr_len); + goto abort_conn; + } + cxgbi_skcb_set_flag(skb, SKCBF_RX_COALESCED); + + err = skb_copy_bits(skb, skb->len - sizeof(ddp_cpl), &ddp_cpl, + sizeof(ddp_cpl)); + if (err < 0) { + cxgb3i_log_error("%s: TID %u, copy cpl_ddp %u-%lu failed %d.\n", + csk->cdev->ports[csk->port_id]->name, + csk->tid, skb->len, sizeof(ddp_cpl), err); + goto abort_conn; + } + + cxgbi_skcb_set_flag(skb, SKCBF_RX_STATUS); + cxgbi_skcb_rx_pdulen(skb) = ntohs(ddp_cpl.len); + cxgbi_skcb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc); + status = ntohl(ddp_cpl.ddp_status); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_RX, + "csk 0x%p, skb 0x%p,%u, pdulen %u, status 0x%x.\n", + csk, skb, skb->len, cxgbi_skcb_rx_pdulen(skb), status); + + if (status & (1 << CPL_RX_DDP_STATUS_HCRC_SHIFT)) + cxgbi_skcb_set_flag(skb, SKCBF_RX_HCRC_ERR); + if (status & (1 << CPL_RX_DDP_STATUS_DCRC_SHIFT)) + cxgbi_skcb_set_flag(skb, SKCBF_RX_DCRC_ERR); + if (status & (1 << CPL_RX_DDP_STATUS_PAD_SHIFT)) + cxgbi_skcb_set_flag(skb, SKCBF_RX_PAD_ERR); + + if (skb->len > (hdr_len + sizeof(ddp_cpl))) { + err = skb_copy_bits(skb, hdr_len, &data_cpl, sizeof(data_cpl)); + if (err < 0) { + cxgb3i_log_error("%s: tid %u, cp %lu/%u failed %d.\n", + csk->cdev->ports[csk->port_id]->name, + csk->tid, sizeof(data_cpl), skb->len, err); + goto abort_conn; + } + data_len = ntohs(data_cpl.len); + cxgb3i_log_debug(1 << CXGBI_DBG_DDP | 1 << CXGBI_DBG_PDU_RX, + "skb 0x%p, pdu not ddp'ed %u/%u, status 0x%x.\n", + skb, data_len, cxgbi_skcb_rx_pdulen(skb), status); + len += sizeof(data_cpl) + data_len; + } else if (status & (1 << CPL_RX_DDP_STATUS_DDP_SHIFT)) + cxgbi_skcb_set_flag(skb, SKCBF_RX_DATA_DDPD); + + csk->rcv_nxt = ntohl(ddp_cpl.seq) + cxgbi_skcb_rx_pdulen(skb); + __pskb_trim(skb, len); + __skb_queue_tail(&csk->receive_queue, skb); + cxgbi_conn_pdu_ready(csk); + + spin_unlock_bh(&csk->lock); + return 0; + +abort_conn: + send_abort_req(csk); +discard: + spin_unlock_bh(&csk->lock); + __kfree_skb(skb); + return 0; +} + +/* + * Process TX_DATA_ACK CPL messages: -> host + * Process an acknowledgment of WR completion. Advance snd_una and send the + * next batch of work requests from the write queue. + */ +static int do_wr_ack(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct cxgbi_sock *csk = ctx; + struct cpl_wr_ack *hdr = cplhdr(skb); + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_PDU_RX, + "csk 0x%p,%u,0x%lx,%u, cr %u.\n", + csk, csk->state, csk->flags, csk->tid, + ntohs(hdr->credits)); + + cxgbi_sock_rcv_wr_ack(csk, ntohs(hdr->credits), ntohl(hdr->snd_una), 1); + __kfree_skb(skb); + return 0; +} + +/* + * for each connection, pre-allocate skbs needed for close/abort requests. So + * that we can service the request right away. + */ +static int alloc_cpls(struct cxgbi_sock *csk) +{ + csk->cpl_close = alloc_cpl(sizeof(struct cpl_close_con_req), 0, + GFP_KERNEL); + if (!csk->cpl_close) + return -ENOMEM; + csk->cpl_abort_req = alloc_cpl(sizeof(struct cpl_abort_req), 0, + GFP_KERNEL); + if (!csk->cpl_abort_req) + goto free_cpl_skbs; + + csk->cpl_abort_rpl = alloc_cpl(sizeof(struct cpl_abort_rpl), 0, + GFP_KERNEL); + if (!csk->cpl_abort_rpl) + goto free_cpl_skbs; + + return 0; + +free_cpl_skbs: + cxgbi_sock_free_cpl_skbs(csk); + return -ENOMEM; +} + +/** + * release_offload_resources - release offload resource + * @c3cn: the offloaded iscsi tcp connection. + * Release resources held by an offload connection (TID, L2T entry, etc.) + */ +static void l2t_put(struct cxgbi_sock *csk) +{ + struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev; + + if (csk->l2t) { + l2t_release(L2DATA(t3dev), csk->l2t); + csk->l2t = NULL; + cxgbi_sock_put(csk); + } +} + +static void release_offload_resources(struct cxgbi_sock *csk) +{ + struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx,%u.\n", + csk, csk->state, csk->flags, csk->tid); + + csk->rss_qid = 0; + cxgbi_sock_free_cpl_skbs(csk); + + if (csk->wr_cred != csk->wr_max_cred) { + cxgbi_sock_purge_wr_queue(csk); + cxgbi_sock_reset_wr_list(csk); + } + l2t_put(csk); + if (cxgbi_sock_flag(csk, CTPF_HAS_ATID)) + free_atid(csk); + else if (cxgbi_sock_flag(csk, CTPF_HAS_TID)) { + cxgb3_remove_tid(t3dev, (void *)csk, csk->tid); + cxgbi_sock_clear_flag(csk, CTPF_HAS_TID); + cxgbi_sock_put(csk); + } + csk->dst = NULL; + csk->cdev = NULL; +} + +static int init_act_open(struct cxgbi_sock *csk) +{ + struct dst_entry *dst = csk->dst; + struct cxgbi_device *cdev = csk->cdev; + struct t3cdev *t3dev = (struct t3cdev *)cdev->lldev; + struct net_device *ndev = cdev->ports[csk->port_id]; + struct sk_buff *skb = NULL; + + cxgb3i_log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, + "csk 0x%p,%u,0x%lx.\n", + csk, csk->state, csk->flags); + + csk->rss_qid = 0; + csk->l2t = t3_l2t_get(t3dev, dst->neighbour, ndev); + if (!csk->l2t) { + cxgb3i_log_error("NO l2t available.\n"); + return -EINVAL; + } + cxgbi_sock_get(csk); + + csk->atid = cxgb3_alloc_atid(t3dev, &t3_client, csk); + if (csk->atid < 0) { + cxgb3i_log_error("NO atid available.\n"); + goto rel_resource; + } + cxgbi_sock_set_flag(csk, CTPF_HAS_ATID); + cxgbi_sock_get(csk); + + skb = alloc_cpl(sizeof(struct cpl_act_open_req), 0, GFP_KERNEL); + if (!skb) + goto rel_resource; + skb->sk = (struct sock *)csk; + set_arp_failure_handler(skb, act_open_arp_failure); + + csk->wr_max_cred = csk->wr_cred = T3C_DATA(t3dev)->max_wrs - 1; + csk->wr_una_cred = 0; + csk->mss_idx = cxgbi_sock_select_mss(csk, dst_mtu(dst)); + cxgbi_sock_reset_wr_list(csk); + csk->err = 0; + + cxgbi_sock_set_state(csk, CTP_ACTIVE_OPEN); + send_act_open_req(csk, skb, csk->l2t); + return 0; + +rel_resource: + if (skb) + __kfree_skb(skb); + return -EINVAL; +} + +cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS] = { + [CPL_ACT_ESTABLISH] = do_act_establish, + [CPL_ACT_OPEN_RPL] = do_act_open_rpl, + [CPL_PEER_CLOSE] = do_peer_close, + [CPL_ABORT_REQ_RSS] = do_abort_req, + [CPL_ABORT_RPL_RSS] = do_abort_rpl, + [CPL_CLOSE_CON_RPL] = do_close_con_rpl, + [CPL_TX_DMA_ACK] = do_wr_ack, + [CPL_ISCSI_HDR] = do_iscsi_hdr, +}; + +/** + * cxgb3i_ofld_init - allocate and initialize resources for each adapter found + * @cdev: cxgbi adapter + */ +int cxgb3i_ofld_init(struct cxgbi_device *cdev) +{ + struct t3cdev *t3dev = (struct t3cdev *)cdev->lldev; + struct adap_ports port; + struct ofld_page_info rx_page_info; + unsigned int wr_len; + int rc; + + if (t3dev->ctl(t3dev, GET_WR_LEN, &wr_len) < 0 || + t3dev->ctl(t3dev, GET_PORTS, &port) < 0 || + t3dev->ctl(t3dev, GET_RX_PAGE_INFO, &rx_page_info) < 0) { + cxgb3i_log_warn("t3 0x%p, offload up, ioctl failed.\n", + t3dev); + return -EINVAL; + } + + if (cxgb3i_max_connect > CXGBI_MAX_CONN) + cxgb3i_max_connect = CXGBI_MAX_CONN; + + rc = cxgbi_device_portmap_create(cdev, cxgb3i_sport_base, + cxgb3i_max_connect); + if (rc < 0) + return rc; + + init_wr_tab(wr_len); + cdev->csk_release_offload_resources = release_offload_resources; + cdev->csk_push_tx_frames = push_tx_frames; + cdev->csk_send_abort_req = send_abort_req; + cdev->csk_send_close_req = send_close_req; + cdev->csk_send_rx_credits = send_rx_credits; + cdev->csk_alloc_cpls = alloc_cpls; + cdev->csk_init_act_open = init_act_open; + + cxgb3i_log_info("cdev 0x%p, offload up, added.\n", cdev); + return 0; +} + +/* + * functions to program the pagepod in h/w + */ +static inline void ulp_mem_io_set_hdr(struct sk_buff *skb, unsigned int addr) +{ + struct ulp_mem_io *req = (struct ulp_mem_io *)skb->head; + + memset(req, 0, sizeof(*req)); + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_BYPASS)); + req->cmd_lock_addr = htonl(V_ULP_MEMIO_ADDR(addr >> 5) | + V_ULPTX_CMD(ULP_MEM_WRITE)); + req->len = htonl(V_ULP_MEMIO_DATA_LEN(PPOD_SIZE >> 5) | + V_ULPTX_NFLITS((PPOD_SIZE >> 3) + 1)); +} + +static int ddp_set_map(struct cxgbi_sock *csk, struct cxgbi_pagepod_hdr *hdr, + unsigned int idx, unsigned int npods, + struct cxgbi_gather_list *gl) +{ + struct cxgbi_device *cdev = csk->cdev; + struct cxgbi_ddp_info *ddp = cdev->ddp; + unsigned int pm_addr = (idx << PPOD_SIZE_SHIFT) + ddp->llimit; + int i; + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "csk 0x%p, idx %u, npods %u, gl 0x%p.\n", + csk, idx, npods, gl); + + for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) { + struct sk_buff *skb = ddp->gl_skb[idx]; + + /* hold on to the skb until we clear the ddp mapping */ + skb_get(skb); + + ulp_mem_io_set_hdr(skb, pm_addr); + cxgbi_ddp_ppod_set((struct cxgbi_pagepod *)(skb->head + + sizeof(struct ulp_mem_io)), + hdr, gl, i * PPOD_PAGES_MAX); + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(cdev->lldev, skb); + } + return 0; +} + +static void ddp_clear_map(struct cxgbi_hba *chba, unsigned int tag, + unsigned int idx, unsigned int npods) +{ + struct cxgbi_device *cdev = chba->cdev; + struct cxgbi_ddp_info *ddp = cdev->ddp; + unsigned int pm_addr = (idx << PPOD_SIZE_SHIFT) + ddp->llimit; + int i; + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "cdev 0x%p, idx %u, npods %u, tag 0x%x.\n", + cdev, idx, npods, tag); + + for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) { + struct sk_buff *skb = ddp->gl_skb[idx]; + + if (!skb) { + cxgb3i_log_error("tag 0x%x, 0x%x, %d/%u, skb NULL.\n", + tag, idx, i, npods); + continue; + } + ddp->gl_skb[idx] = NULL; + memset(skb->head + sizeof(struct ulp_mem_io), 0, PPOD_SIZE); + ulp_mem_io_set_hdr(skb, pm_addr); + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(cdev->lldev, skb); + } +} + +static void ddp_free_gl_skb(struct cxgbi_ddp_info *ddp, int idx, int cnt) +{ + int i; + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "ddp 0x%p, idx %d, cnt %d.\n", + ddp, idx, cnt); + + for (i = 0; i < cnt; i++, idx++) + if (ddp->gl_skb[idx]) { + kfree_skb(ddp->gl_skb[idx]); + ddp->gl_skb[idx] = NULL; + } +} + +static int ddp_alloc_gl_skb(struct cxgbi_ddp_info *ddp, int idx, + int cnt, gfp_t gfp) +{ + int i; + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "ddp 0x%p, idx %d, cnt %d.\n", + ddp, idx, cnt); + + for (i = 0; i < cnt; i++) { + struct sk_buff *skb = alloc_cpl(sizeof(struct ulp_mem_io) + + PPOD_SIZE, 0, gfp); + if (skb) { + ddp->gl_skb[idx + i] = skb; + } else { + ddp_free_gl_skb(ddp, idx, i); + return -ENOMEM; + } + } + return 0; +} + +static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, + unsigned int tid, int pg_idx, bool reply) +{ + struct sk_buff *skb = alloc_cpl(sizeof(struct cpl_set_tcb_field), 0, + GFP_KERNEL); + struct cpl_set_tcb_field *req; + u64 val = pg_idx < DDP_PGIDX_MAX ? pg_idx : 0; + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "csk 0x%p, tid %u, pg_idx %d.\n", + csk, tid, pg_idx); + + if (!skb) + return -ENOMEM; + + /* set up ulp submode and page size */ + req = (struct cpl_set_tcb_field *)skb->head; + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = V_NO_REPLY(reply ? 0 : 1); + req->cpu_idx = 0; + req->word = htons(31); + req->mask = cpu_to_be64(0xF0000000); + req->val = cpu_to_be64(val << 28); + skb->priority = CPL_PRIORITY_CONTROL; + + cxgb3_ofld_send(csk->cdev->lldev, skb); + return 0; +} + +/** + * cxgb3i_setup_conn_digest - setup conn. digest setting + * @csk: cxgb tcp socket + * @tid: connection id + * @hcrc: header digest enabled + * @dcrc: data digest enabled + * @reply: request reply from h/w + * set up the iscsi digest settings for a connection identified by tid + */ +static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, + int hcrc, int dcrc, int reply) +{ + struct sk_buff *skb = alloc_cpl(sizeof(struct cpl_set_tcb_field), 0, + GFP_KERNEL); + struct cpl_set_tcb_field *req; + u64 val = (hcrc ? 1 : 0) | (dcrc ? 2 : 0); + + cxgb3i_log_debug(1 << CXGBI_DBG_DDP, + "csk 0x%p, tid %u, crc %d,%d.\n", + csk, tid, hcrc, dcrc); + if (!skb) + return -ENOMEM; + + /* set up ulp submode and page size */ + req = (struct cpl_set_tcb_field *)skb->head; + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = V_NO_REPLY(reply ? 0 : 1); + req->cpu_idx = 0; + req->word = htons(31); + req->mask = cpu_to_be64(0x0F000000); + req->val = cpu_to_be64(val << 24); + skb->priority = CPL_PRIORITY_CONTROL; + + cxgb3_ofld_send(csk->cdev->lldev, skb); + return 0; +} + +/** + * t3_ddp_cleanup - release the cxgb3 adapter's ddp resource + * @cdev: cxgb3i adapter + * release all the resource held by the ddp pagepod manager for a given + * adapter if needed + */ + +static void t3_ddp_cleanup(struct cxgbi_device *cdev) +{ + struct t3cdev *tdev = (struct t3cdev *)cdev->lldev; + + if (cxgbi_ddp_cleanup(cdev)) { + cxgb3i_log_info("t3dev 0x%p, ulp_iscsi no more user.\n", + tdev); + tdev->ulp_iscsi = NULL; + } +} + +/** + * ddp_init - initialize the cxgb3 adapter's ddp resource + * @cdev: cxgb3i adapter + * initialize the ddp pagepod manager for a given adapter + */ +static int cxgb3i_ddp_init(struct cxgbi_device *cdev) +{ + struct t3cdev *tdev = (struct t3cdev *)cdev->lldev; + struct cxgbi_ddp_info *ddp = tdev->ulp_iscsi; + struct ulp_iscsi_info uinfo; + unsigned int pgsz_factor[4]; + int err; + + if (ddp) { + kref_get(&ddp->refcnt); + cxgb3i_log_warn("t3dev 0x%p, ddp 0x%p already set up.\n", + tdev, tdev->ulp_iscsi); + cdev->ddp = ddp; + return -EALREADY; + } + + err = tdev->ctl(tdev, ULP_ISCSI_GET_PARAMS, &uinfo); + if (err < 0) { + cxgb3i_log_error("%s, failed to get iscsi param err=%d.\n", + tdev->name, err); + return err; + } + + err = cxgbi_ddp_init(cdev, uinfo.llimit, uinfo.ulimit, + uinfo.max_txsz, uinfo.max_rxsz); + if (err < 0) + return err; + + ddp = cdev->ddp; + + uinfo.tagmask = ddp->idx_mask << PPOD_IDX_SHIFT; + cxgbi_ddp_page_size_factor(pgsz_factor); + uinfo.ulimit = uinfo.llimit + (ddp->nppods << PPOD_SIZE_SHIFT); + + err = tdev->ctl(tdev, ULP_ISCSI_SET_PARAMS, &uinfo); + if (err < 0) { + cxgb3i_log_warn("%s unable to set iscsi param err=%d, " + "ddp disabled.\n", tdev->name, err); + cxgbi_ddp_cleanup(cdev); + return err; + } + tdev->ulp_iscsi = ddp; + + cdev->csk_ddp_free_gl_skb = ddp_free_gl_skb; + cdev->csk_ddp_alloc_gl_skb = ddp_alloc_gl_skb; + cdev->csk_ddp_setup_digest = ddp_setup_conn_digest; + cdev->csk_ddp_setup_pgidx = ddp_setup_conn_pgidx; + cdev->csk_ddp_set = ddp_set_map; + cdev->csk_ddp_clear = ddp_clear_map; + + cxgb3i_log_info("tdev 0x%p, nppods %u, bits %u, mask 0x%x,0x%x " + "pkt %u/%u, %u/%u.\n", + tdev, ddp->nppods, ddp->idx_bits, ddp->idx_mask, + ddp->rsvd_tag_mask, ddp->max_txsz, uinfo.max_txsz, + ddp->max_rxsz, uinfo.max_rxsz); + return 0; +} + +static void cxgb3i_dev_close(struct t3cdev *t3dev) +{ + struct cxgbi_device *cdev = cxgbi_device_find_by_lldev(t3dev); + + if (!cdev || cdev->flags & CXGBI_FLAG_ADAPTER_RESET) { + cxgb3i_log_info("t3 0x%p close, f 0x%x.\n", + cdev, cdev ? cdev->flags : 0); + return; + } + + cxgbi_device_unregister(cdev); +} + +/** + * cxgb3i_dev_open - init a t3 adapter structure and any h/w settings + * @t3dev: t3cdev adapter + */ +static void cxgb3i_dev_open(struct t3cdev *t3dev) +{ + static int vers_printed; + + struct cxgbi_device *cdev = cxgbi_device_find_by_lldev(t3dev); + struct adapter *adapter = tdev2adap(t3dev); + int i, err; + + if (!vers_printed) { + printk(KERN_INFO "%s", version); + vers_printed = 1; + } + + if (cdev) { + cxgb3i_log_info("t3 0x%p, updating.\n", cdev); + return; + } + + cdev = cxgbi_device_register(0, adapter->params.nports); + if (!cdev) { + cxgb3i_log_warn("t3 device 0x%p register failed.\n", t3dev); + return; + } + + cdev->flags = CXGBI_FLAG_DEV_T3; + cdev->lldev = t3dev; + cdev->pdev = adapter->pdev; + cdev->ports = adapter->port; + cdev->nports = adapter->params.nports; + cdev->mtus = adapter->params.mtus; + cdev->nmtus = NMTUS; + cdev->snd_win = cxgb3i_snd_win; + cdev->rcv_win = cxgb3i_rcv_win; + cdev->rx_credit_thres = cxgb3i_rx_credit_thres; + cdev->skb_tx_rsvd = CXGB3I_TX_HEADER_LEN; + cdev->skb_rx_extra = sizeof(struct cpl_iscsi_hdr_norss); + cdev->dev_ddp_cleanup = t3_ddp_cleanup; + cdev->itp = &cxgb3i_iscsi_transport; + + err = cxgb3i_ddp_init(cdev); + if (err) { + cxgb3i_log_info("t3 0x%p ddp init failed\n", cdev); + goto err_out; + } + + err = cxgb3i_ofld_init(cdev); + if (err) { + cxgb3i_log_info("t3 0x%p offload init failed\n", cdev); + goto err_out; + } + + err = cxgbi_hbas_add(cdev, CXGB3I_MAX_LUN, CXGBI_MAX_CONN, + &cxgb3i_host_template, cxgb3i_stt); + if (err) + goto err_out; + + for (i = 0; i < cdev->nports; i++) + cdev->hbas[i]->ipv4addr = + cxgb3i_get_private_ipv4addr(cdev->ports[i]); + + cxgb3i_log_info("cdev 0x%p, f 0x%x, t3dev 0x%p open, err %d.\n", + cdev, cdev ? cdev->flags : 0, t3dev, err); + return; + +err_out: + cxgbi_device_unregister(cdev); +} + +static void cxgb3i_dev_event_handler(struct t3cdev *t3dev, u32 event, u32 port) +{ + struct cxgbi_device *cdev = cxgbi_device_find_by_lldev(t3dev); + + cxgb3i_log_debug(CXGBI_DBG_TOE, + "t3dev 0x%p, cdev 0x%p, event 0x%x, port 0x%x.\n", + t3dev, cdev, event, port); + if (!cdev) + return; + + switch (event) { + case OFFLOAD_STATUS_DOWN: + cdev->flags |= CXGBI_FLAG_ADAPTER_RESET; + break; + case OFFLOAD_STATUS_UP: + cdev->flags &= ~CXGBI_FLAG_ADAPTER_RESET; + break; + } +} + +/** + * cxgb3i_init_module - module init entry point + * + * initialize any driver wide global data structures and register itself + * with the cxgb3 module + */ +static int __init cxgb3i_init_module(void) +{ + int rc; + + rc = cxgbi_iscsi_init(&cxgb3i_iscsi_transport, &cxgb3i_stt); + if (rc < 0) + return rc; + + cxgb3_register_client(&t3_client); + return 0; +} + +/** + * cxgb3i_exit_module - module cleanup/exit entry point + * + * go through the driver hba list and for each hba, release any resource held. + * and unregisters iscsi transport and the cxgb3 module + */ +static void __exit cxgb3i_exit_module(void) +{ + cxgb3_unregister_client(&t3_client); + cxgbi_device_unregister_all(CXGBI_FLAG_DEV_T3); + cxgbi_iscsi_cleanup(&cxgb3i_iscsi_transport, &cxgb3i_stt); +} + +module_init(cxgb3i_init_module); +module_exit(cxgb3i_exit_module); diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h new file mode 100644 index 0000000..5f5e339 --- /dev/null +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h @@ -0,0 +1,51 @@ +/* + * cxgb3i.h: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#ifndef __CXGB3I_H__ +#define __CXGB3I_H__ + +#define CXGB3I_SCSI_HOST_QDEPTH 1024 +#define CXGB3I_MAX_LUN 512 +#define ISCSI_PDU_NONPAYLOAD_MAX \ + (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE + 2*ISCSI_DIGEST_SIZE) + +/*for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */ +#define CXGB3I_TX_HEADER_LEN \ + (sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr)) + +extern cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS]; + +#define cxgb3i_get_private_ipv4addr(ndev) \ + (((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr) +#define cxgb3i_set_private_ipv4addr(ndev, addr) \ + (((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr) = addr + +struct cpl_iscsi_hdr_norss { + union opcode_tid ot; + u16 pdu_len_ddp; + u16 len; + u32 seq; + u16 urg; + u8 rsvd; + u8 status; +}; + +struct cpl_rx_data_ddp_norss { + union opcode_tid ot; + u16 urg; + u16 len; + u32 seq; + u32 nxt_seq; + u32 ulp_crc; + u32 ddp_status; +}; +#endif -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/