Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 3 Jun 2002 19:24:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 3 Jun 2002 19:24:51 -0400 Received: from email.careercast.com ([216.39.101.233]:2217 "HELO email.careercast.com") by vger.kernel.org with SMTP id ; Mon, 3 Jun 2002 19:24:44 -0400 Subject: Re: Another -pre From: Matt Simonsen To: Alan Cox , lkml In-Reply-To: <1023149710.6773.82.camel@irongate.swansea.linux.org.uk> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 (1.0.3-4) Date: 03 Jun 2002 16:24:45 -0700 Message-Id: <1023146686.1373.18.camel@mattswork> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On the IDE fixes note, I am using a HighPoint card with the HPT302 chipset - I can get the primary IDE channel to work perfectly, but the secondary doesn't show up. Below is a DMESG: Matt PS - I'm trying to be helpful and think this is the proper way to do it. Please let me know if I am mistaken or need to do something differently. Linux version 2.4.19-pre9-ac2 (root@mattswork) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 SMP Mon Jun 3 11:57:00 PDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffd000 (usable) BIOS-e820: 000000003fffd000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6e50 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 262141 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32765 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: auto BOOT_IMAGE=linux-2.4.19p9 ro root=806 BOOT_FILE=/boot/vmlinuz-2.4.19.pre9-ac hda=ide-scsi ide_setup: hda=ide-scsi Initializing CPU#0 Detected 451.034 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 1030600k/1048564k available (1823k kernel code, 17576k reserved, 549k data, 288k init, 131060k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 1461.42 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 901.12 BogoMIPS CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (1798.96 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-13, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 71 0f 003 03 0 0 0 0 0 1 1 79 10 003 03 1 1 0 1 0 1 1 81 11 003 03 1 1 0 1 0 1 1 89 12 003 03 1 1 0 1 0 1 1 91 13 003 03 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:18 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:19 IRQ10 -> 0:17 IRQ11 -> 0:16 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 451.0322 MHz. ..... host bus clock speed is 100.2291 MHz. cpu: 0, clocks: 1002291, slice: 334097 CPU0 cpu: 1, clocks: 1002291, slice: 334097 CPU1 checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 PCI: PCI BIOS revision 2.10 entry at 0xf0730, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio HPT302: IDE controller on PCI bus 00 dev 60 HPT302: chipset revision 1 HPT302: not 100% native mode: will probe irqs later HPT37X: using 33MHz PCI clock ide2: BM-DMA at 0x9800-0x9807, BIOS settings: hde:DMA, hdf:pio hda: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive hde: WDC WD400BB-00CFC0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide2 at 0xb000-0xb007,0xa802 on irq 11 hde: host protected area => 1 hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) Partition check: hde: [PTBL] [4865/255/63] hde1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) eth0: Macronix 98715 PMAC rev 32 at 0xd000, 00:80:C6:F7:82:05, IRQ 9. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected Intel 440BX chipset agpgart: AGP aperture is 64M @ 0xe4000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 on Intel 440BX @ 0xe4000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 SCSI subsystem driver Revision: 1.00 scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.06I, I/O Address: 0xB400, IRQ Channel: 10/Level scsi0: PCI Bus: 0, Device: 11, Address: 0xDE800000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled scsi0: SCSI Bus Termination: Both Enabled, SCAM: Enabled, Level 1 scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi0 : BusLogic BT-958 Vendor: SEAGATE Model: ST318451LW Rev: 0003 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST39103LW Rev: 0001 Type: Direct-Access ANSI SCSI revision: 02 scsi0: Target 0: Queue Depth 28, Wide Synchronous at 40.0 MB/sec, offset 15 scsi0: Target 14: Queue Depth 28, Wide Synchronous at 40.0 MB/sec, offset 15 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8110 Type: Sequential-Access ANSI SCSI revision: 03 (scsi1:A:4): 10.000MB/s transfers (10.000MHz, offset 15) scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g Type: CD-ROM ANSI SCSI revision: 02 st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16 Attached scsi tape st0 at scsi1, channel 0, id 4, lun 0 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 14, lun 0 SCSI device sda: 35843671 512-byte hdwr sectors (18352 MB) sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB) sdb: sdb1 sdb2 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 288k freed scsi0: Tagged Queuing now active for Target 0 Adding Swap: 2048248k swap-space (priority -1) On Mon, 2002-06-03 at 17:15, Alan Cox wrote: > On Mon, 2002-06-03 at 15:55, Marcelo Tosatti wrote: > > On Mon, 3 Jun 2002, Pawel Kot wrote: > > > > > On Mon, 3 Jun 2002, Marcelo Tosatti wrote: > > > > > > > Due to some missing network fixes and -ac merge, I'll release another -pre > > > > later today. > > > > > > > > -rc should be out by the end of the week. > > > > > > Would you please consider merging some IDE updates before releasing > > > 2.4.19? Current version remains unusable for me. > > > See http://marc.theaimsgroup.com/?l=linux-kernel&m=102277249800423&w=2 > > > and followers for more detailes. > > > > Andre, > > > > Have you looked into this problem ? > > With the current code I've got these items on my list I class as > problematic. > > 1 Weird corruption report with AMD chipset in PIO mode > 1 NULL pointer crash report on SiS chipset > 2 Intel 845G issues (PIO only, incorrect BIOS setup) > 1 set of requested Promise changes > > The 845G and Promise ones are present in both. The AMD one is utterly > weird and I'm still looking at the SiS one. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/