Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756891Ab0HQJxh (ORCPT ); Tue, 17 Aug 2010 05:53:37 -0400 Received: from eu1sys200aog118.obsmtp.com ([207.126.144.145]:49440 "EHLO eu1sys200aog118.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753808Ab0HQJxf (ORCPT ); Tue, 17 Aug 2010 05:53:35 -0400 From: Mattias Wallin To: Samuel Ortiz Cc: , Mattias Wallin Subject: [PATCH 1/2] MFD: Align ab8500 with the abx500 interface Date: Tue, 17 Aug 2010 11:24:37 +0200 Message-ID: <1282037077-29255-1-git-send-email-mattias.wallin@stericsson.com> X-Mailer: git-send-email 1.6.3.3 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33248 Lines: 1010 This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin --- drivers/mfd/Kconfig | 4 +- drivers/mfd/ab8500-core.c | 286 ++++++++++++++++++++++++++------------------ drivers/regulator/ab8500.c | 86 ++++++++------ drivers/rtc/rtc-ab8500.c | 103 ++++++++-------- include/linux/mfd/ab8500.h | 28 ++++- include/linux/mfd/abx500.h | 3 +- 6 files changed, 301 insertions(+), 209 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index db51ea1..c957c3a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -433,7 +433,7 @@ config PCF50633_GPIO config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" - default y if ARCH_U300 + default y if ARCH_U300 || ARCH_U8500 help Say yes here if you have the ABX500 Mixed Signal IC family chips. This core driver expose register access functions. @@ -473,7 +473,7 @@ config EZX_PCAP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on SPI=y && GENERIC_HARDIRQS + depends on SPI=y && GENERIC_HARDIRQS && ABX500_CORE select MFD_CORE help Select this option to enable access to AB8500 power management diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index defa786..6548f50 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -4,6 +4,7 @@ * License Terms: GNU General Public License v2 * Author: Srinidhi Kasagar * Author: Rabin Vincent + * Changes: Mattias Wallin */ #include @@ -15,6 +16,7 @@ #include #include #include +#include #include #include @@ -22,71 +24,71 @@ * Interrupt register offsets * Bank : 0x0E */ -#define AB8500_IT_SOURCE1_REG 0x0E00 -#define AB8500_IT_SOURCE2_REG 0x0E01 -#define AB8500_IT_SOURCE3_REG 0x0E02 -#define AB8500_IT_SOURCE4_REG 0x0E03 -#define AB8500_IT_SOURCE5_REG 0x0E04 -#define AB8500_IT_SOURCE6_REG 0x0E05 -#define AB8500_IT_SOURCE7_REG 0x0E06 -#define AB8500_IT_SOURCE8_REG 0x0E07 -#define AB8500_IT_SOURCE19_REG 0x0E12 -#define AB8500_IT_SOURCE20_REG 0x0E13 -#define AB8500_IT_SOURCE21_REG 0x0E14 -#define AB8500_IT_SOURCE22_REG 0x0E15 -#define AB8500_IT_SOURCE23_REG 0x0E16 -#define AB8500_IT_SOURCE24_REG 0x0E17 +#define AB8500_IT_SOURCE1_REG 0x00 +#define AB8500_IT_SOURCE2_REG 0x01 +#define AB8500_IT_SOURCE3_REG 0x02 +#define AB8500_IT_SOURCE4_REG 0x03 +#define AB8500_IT_SOURCE5_REG 0x04 +#define AB8500_IT_SOURCE6_REG 0x05 +#define AB8500_IT_SOURCE7_REG 0x06 +#define AB8500_IT_SOURCE8_REG 0x07 +#define AB8500_IT_SOURCE19_REG 0x12 +#define AB8500_IT_SOURCE20_REG 0x13 +#define AB8500_IT_SOURCE21_REG 0x14 +#define AB8500_IT_SOURCE22_REG 0x15 +#define AB8500_IT_SOURCE23_REG 0x16 +#define AB8500_IT_SOURCE24_REG 0x17 /* * latch registers */ -#define AB8500_IT_LATCH1_REG 0x0E20 -#define AB8500_IT_LATCH2_REG 0x0E21 -#define AB8500_IT_LATCH3_REG 0x0E22 -#define AB8500_IT_LATCH4_REG 0x0E23 -#define AB8500_IT_LATCH5_REG 0x0E24 -#define AB8500_IT_LATCH6_REG 0x0E25 -#define AB8500_IT_LATCH7_REG 0x0E26 -#define AB8500_IT_LATCH8_REG 0x0E27 -#define AB8500_IT_LATCH9_REG 0x0E28 -#define AB8500_IT_LATCH10_REG 0x0E29 -#define AB8500_IT_LATCH19_REG 0x0E32 -#define AB8500_IT_LATCH20_REG 0x0E33 -#define AB8500_IT_LATCH21_REG 0x0E34 -#define AB8500_IT_LATCH22_REG 0x0E35 -#define AB8500_IT_LATCH23_REG 0x0E36 -#define AB8500_IT_LATCH24_REG 0x0E37 +#define AB8500_IT_LATCH1_REG 0x20 +#define AB8500_IT_LATCH2_REG 0x21 +#define AB8500_IT_LATCH3_REG 0x22 +#define AB8500_IT_LATCH4_REG 0x23 +#define AB8500_IT_LATCH5_REG 0x24 +#define AB8500_IT_LATCH6_REG 0x25 +#define AB8500_IT_LATCH7_REG 0x26 +#define AB8500_IT_LATCH8_REG 0x27 +#define AB8500_IT_LATCH9_REG 0x28 +#define AB8500_IT_LATCH10_REG 0x29 +#define AB8500_IT_LATCH19_REG 0x32 +#define AB8500_IT_LATCH20_REG 0x33 +#define AB8500_IT_LATCH21_REG 0x34 +#define AB8500_IT_LATCH22_REG 0x35 +#define AB8500_IT_LATCH23_REG 0x36 +#define AB8500_IT_LATCH24_REG 0x37 /* * mask registers */ -#define AB8500_IT_MASK1_REG 0x0E40 -#define AB8500_IT_MASK2_REG 0x0E41 -#define AB8500_IT_MASK3_REG 0x0E42 -#define AB8500_IT_MASK4_REG 0x0E43 -#define AB8500_IT_MASK5_REG 0x0E44 -#define AB8500_IT_MASK6_REG 0x0E45 -#define AB8500_IT_MASK7_REG 0x0E46 -#define AB8500_IT_MASK8_REG 0x0E47 -#define AB8500_IT_MASK9_REG 0x0E48 -#define AB8500_IT_MASK10_REG 0x0E49 -#define AB8500_IT_MASK11_REG 0x0E4A -#define AB8500_IT_MASK12_REG 0x0E4B -#define AB8500_IT_MASK13_REG 0x0E4C -#define AB8500_IT_MASK14_REG 0x0E4D -#define AB8500_IT_MASK15_REG 0x0E4E -#define AB8500_IT_MASK16_REG 0x0E4F -#define AB8500_IT_MASK17_REG 0x0E50 -#define AB8500_IT_MASK18_REG 0x0E51 -#define AB8500_IT_MASK19_REG 0x0E52 -#define AB8500_IT_MASK20_REG 0x0E53 -#define AB8500_IT_MASK21_REG 0x0E54 -#define AB8500_IT_MASK22_REG 0x0E55 -#define AB8500_IT_MASK23_REG 0x0E56 -#define AB8500_IT_MASK24_REG 0x0E57 - -#define AB8500_REV_REG 0x1080 +#define AB8500_IT_MASK1_REG 0x40 +#define AB8500_IT_MASK2_REG 0x41 +#define AB8500_IT_MASK3_REG 0x42 +#define AB8500_IT_MASK4_REG 0x43 +#define AB8500_IT_MASK5_REG 0x44 +#define AB8500_IT_MASK6_REG 0x45 +#define AB8500_IT_MASK7_REG 0x46 +#define AB8500_IT_MASK8_REG 0x47 +#define AB8500_IT_MASK9_REG 0x48 +#define AB8500_IT_MASK10_REG 0x49 +#define AB8500_IT_MASK11_REG 0x4A +#define AB8500_IT_MASK12_REG 0x4B +#define AB8500_IT_MASK13_REG 0x4C +#define AB8500_IT_MASK14_REG 0x4D +#define AB8500_IT_MASK15_REG 0x4E +#define AB8500_IT_MASK16_REG 0x4F +#define AB8500_IT_MASK17_REG 0x50 +#define AB8500_IT_MASK18_REG 0x51 +#define AB8500_IT_MASK19_REG 0x52 +#define AB8500_IT_MASK20_REG 0x53 +#define AB8500_IT_MASK21_REG 0x54 +#define AB8500_IT_MASK22_REG 0x55 +#define AB8500_IT_MASK23_REG 0x56 +#define AB8500_IT_MASK24_REG 0x57 + +#define AB8500_REV_REG 0x80 /* * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt @@ -99,96 +101,132 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21, }; -static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) +static int ab8500_get_chip_id(struct device *dev) +{ + struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); + return (int)ab8500->chip_id; +} + +static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, + u8 reg, u8 data) { int ret; + /* + * Put the u8 bank and u8 register together into a an u16. + * The bank on higher 8 bits and register in lower 8 bits. + * */ + u16 addr = ((u16)bank) << 8 | reg; dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); + ret = mutex_lock_interruptible(&ab8500->lock); + if (ret) + return ret; + ret = ab8500->write(ab8500, addr, data); if (ret < 0) dev_err(ab8500->dev, "failed to write reg %#x: %d\n", addr, ret); + mutex_unlock(&ab8500->lock); return ret; } -/** - * ab8500_write() - write an AB8500 register - * @ab8500: device to write to - * @addr: address of the register - * @data: value to write - */ -int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) +static int ab8500_set_register(struct device *dev, u8 bank, + u8 reg, u8 value) { - int ret; - - mutex_lock(&ab8500->lock); - ret = __ab8500_write(ab8500, addr, data); - mutex_unlock(&ab8500->lock); + struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); - return ret; + return set_register_interruptible(ab8500, bank, reg, value); } -EXPORT_SYMBOL_GPL(ab8500_write); -static int __ab8500_read(struct ab8500 *ab8500, u16 addr) +static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, + u8 reg, u8 *value) { int ret; + /* put the u8 bank and u8 reg together into a an u16. + * bank on higher 8 bits and reg in lower */ + u16 addr = ((u16)bank) << 8 | reg; + + ret = mutex_lock_interruptible(&ab8500->lock); + if (ret) + return ret; ret = ab8500->read(ab8500, addr); if (ret < 0) dev_err(ab8500->dev, "failed to read reg %#x: %d\n", addr, ret); + else + *value = ret; + mutex_unlock(&ab8500->lock); dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret); return ret; } -/** - * ab8500_read() - read an AB8500 register - * @ab8500: device to read from - * @addr: address of the register - */ -int ab8500_read(struct ab8500 *ab8500, u16 addr) +static int ab8500_get_register(struct device *dev, u8 bank, + u8 reg, u8 *value) { - int ret; - - mutex_lock(&ab8500->lock); - ret = __ab8500_read(ab8500, addr); - mutex_unlock(&ab8500->lock); + struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); - return ret; + return get_register_interruptible(ab8500, bank, reg, value); } -EXPORT_SYMBOL_GPL(ab8500_read); - -/** - * ab8500_set_bits() - set a bitfield in an AB8500 register - * @ab8500: device to read from - * @addr: address of the register - * @mask: mask of the bitfield to modify - * @data: value to set to the bitfield - */ -int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data) + +static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, + u8 reg, u8 bitmask, u8 bitvalues) { int ret; + u8 data; + /* put the u8 bank and u8 reg together into a an u16. + * bank on higher 8 bits and reg in lower */ + u16 addr = ((u16)bank) << 8 | reg; - mutex_lock(&ab8500->lock); + ret = mutex_lock_interruptible(&ab8500->lock); + if (ret) + return ret; - ret = __ab8500_read(ab8500, addr); - if (ret < 0) + ret = ab8500->read(ab8500, addr); + if (ret < 0) { + dev_err(ab8500->dev, "failed to read reg %#x: %d\n", + addr, ret); goto out; + } - ret &= ~mask; - ret |= data; + data = (u8)ret; + data = (~bitmask & data) | (bitmask & bitvalues); - ret = __ab8500_write(ab8500, addr, ret); + ret = ab8500->write(ab8500, addr, data); + if (ret < 0) + dev_err(ab8500->dev, "failed to write reg %#x: %d\n", + addr, ret); + dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data); out: mutex_unlock(&ab8500->lock); return ret; } -EXPORT_SYMBOL_GPL(ab8500_set_bits); + +static int ab8500_mask_and_set_register(struct device *dev, + u8 bank, u8 reg, u8 bitmask, u8 bitvalues) +{ + struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); + + return mask_and_set_register_interruptible(ab8500, bank, reg, + bitmask, bitvalues); + +} + +static struct abx500_ops ab8500_ops = { + .get_chip_id = ab8500_get_chip_id, + .get_register = ab8500_get_register, + .set_register = ab8500_set_register, + .get_register_page = NULL, + .set_register_page = NULL, + .mask_and_set_register = ab8500_mask_and_set_register, + .event_registers_startup_state_get = NULL, + .startup_irq_enabled = NULL, +}; static void ab8500_irq_lock(unsigned int irq) { @@ -213,7 +251,7 @@ static void ab8500_irq_sync_unlock(unsigned int irq) ab8500->oldmask[i] = new; reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; - ab8500_write(ab8500, reg, new); + set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new); } mutex_unlock(&ab8500->irq_lock); @@ -257,9 +295,11 @@ static irqreturn_t ab8500_irq(int irq, void *dev) for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { int regoffset = ab8500_irq_regoffset[i]; int status; + u8 value; - status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset); - if (status <= 0) + status = get_register_interruptible(ab8500, AB8500_INTERRUPT, + AB8500_IT_LATCH1_REG + regoffset, &value); + if (status < 0 || value == 0) continue; do { @@ -267,8 +307,8 @@ static irqreturn_t ab8500_irq(int irq, void *dev) int line = i * 8 + bit; handle_nested_irq(ab8500->irq_base + line); - status &= ~(1 << bit); - } while (status); + value &= ~(1 << bit); + } while (value); } return IRQ_HANDLED; @@ -339,6 +379,11 @@ static struct resource ab8500_rtc_resources[] = { }; static struct mfd_cell ab8500_devs[] = { +#ifdef CONFIG_DEBUG_FS + { + .name = "ab8500-debug", + }, +#endif { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), @@ -361,6 +406,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500) struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); int ret; int i; + u8 value; if (plat) ab8500->irq_base = plat->irq_base; @@ -368,7 +414,8 @@ int __devinit ab8500_init(struct ab8500 *ab8500) mutex_init(&ab8500->lock); mutex_init(&ab8500->irq_lock); - ret = ab8500_read(ab8500, AB8500_REV_REG); + ret = get_register_interruptible(ab8500, AB8500_MISC, + AB8500_REV_REG, &value); if (ret < 0) return ret; @@ -377,28 +424,37 @@ int __devinit ab8500_init(struct ab8500 *ab8500) * 0x10 - Cut 1.0 * 0x11 - Cut 1.1 */ - if (ret == 0x0 || ret == 0x10 || ret == 0x11) { - ab8500->revision = ret; - dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret); + if (value == 0x0 || value == 0x10 || value == 0x11) { + ab8500->revision = value; + dev_info(ab8500->dev, "detected chip, revision: %#x\n", value); } else { - dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret); + dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value); return -EINVAL; } + ab8500->chip_id = value; if (plat && plat->init) plat->init(ab8500); /* Clear and mask all interrupts */ for (i = 0; i < 10; i++) { - ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); - ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); + get_register_interruptible(ab8500, AB8500_INTERRUPT, + AB8500_IT_LATCH1_REG + i, &value); + set_register_interruptible(ab8500, AB8500_INTERRUPT, + AB8500_IT_MASK1_REG + i, 0xff); } for (i = 18; i < 24; i++) { - ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); - ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); + get_register_interruptible(ab8500, AB8500_INTERRUPT, + AB8500_IT_LATCH1_REG + i, &value); + set_register_interruptible(ab8500, AB8500_INTERRUPT, + AB8500_IT_MASK1_REG + i, 0xff); } + ret = abx500_register_ops(ab8500->dev, &ab8500_ops); + if (ret) + return ret; + for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) ab8500->mask[i] = ab8500->oldmask[i] = 0xff; diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index cc7cbaf..86d2e1a 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -33,9 +34,11 @@ * @max_uV: maximum voltage (for variable voltage supplies) * @min_uV: minimum voltage (for variable voltage supplies) * @fixed_uV: typical voltage (for fixed voltage supplies) + * @update_bank: bank to control on/off * @update_reg: register to control on/off * @mask: mask to enable/disable regulator * @enable: bits to enable the regulator in normal(high power) mode + * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage * @supported_voltages: supported voltage table @@ -49,11 +52,13 @@ struct ab8500_regulator_info { int max_uV; int min_uV; int fixed_uV; - int update_reg; - int mask; - int enable; - int voltage_reg; - int voltage_mask; + u8 update_bank; + u8 update_reg; + u8 mask; + u8 enable; + u8 voltage_bank; + u8 voltage_reg; + u8 voltage_mask; int const *supported_voltages; int voltages_len; }; @@ -97,8 +102,8 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev) if (regulator_id >= AB8500_NUM_REGULATORS) return -EINVAL; - ret = ab8500_set_bits(info->ab8500, info->update_reg, - info->mask, info->enable); + ret = abx500_mask_and_set_register_interruptible(info->dev, + info->update_bank, info->update_reg, info->mask, info->enable); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set enable bits for regulator\n"); @@ -114,8 +119,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev) if (regulator_id >= AB8500_NUM_REGULATORS) return -EINVAL; - ret = ab8500_set_bits(info->ab8500, info->update_reg, - info->mask, 0x0); + ret = abx500_mask_and_set_register_interruptible(info->dev, + info->update_bank, info->update_reg, info->mask, 0x0); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set disable bits for regulator\n"); @@ -126,19 +131,21 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev) { int regulator_id, ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + u8 value; regulator_id = rdev_get_id(rdev); if (regulator_id >= AB8500_NUM_REGULATORS) return -EINVAL; - ret = ab8500_read(info->ab8500, info->update_reg); + ret = abx500_get_register_interruptible(info->dev, + info->update_bank, info->update_reg, &value); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't read 0x%x register\n", info->update_reg); return ret; } - if (ret & info->mask) + if (value & info->mask) return true; else return false; @@ -165,14 +172,16 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector) static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) { - int regulator_id, ret, val; + int regulator_id, ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + u8 value; regulator_id = rdev_get_id(rdev); if (regulator_id >= AB8500_NUM_REGULATORS) return -EINVAL; - ret = ab8500_read(info->ab8500, info->voltage_reg); + ret = abx500_get_register_interruptible(info->dev, info->voltage_bank, + info->voltage_reg, &value); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't read voltage reg for regulator\n"); @@ -180,11 +189,11 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) } /* vintcore has a different layout */ - val = ret & info->voltage_mask; + value &= info->voltage_mask; if (regulator_id == AB8500_LDO_INTCORE) - ret = info->supported_voltages[val >> 0x3]; + ret = info->supported_voltages[value >> 0x3]; else - ret = info->supported_voltages[val]; + ret = info->supported_voltages[value]; return ret; } @@ -224,8 +233,9 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev, } /* set the registers for the request */ - ret = ab8500_set_bits(info->ab8500, info->voltage_reg, - info->voltage_mask, ret); + ret = abx500_mask_and_set_register_interruptible(info->dev, + info->voltage_bank, info->voltage_reg, + info->voltage_mask, (u8)ret); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set voltage reg for regulator\n"); @@ -262,9 +272,9 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { .list_voltage = ab8500_list_voltage, }; -#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \ - volt_reg, volt_mask, voltages, \ - len_volts) \ +#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \ + reg_enable, volt_bank, volt_reg, volt_mask, \ + voltages, len_volts) \ { \ .desc = { \ .name = "LDO-" #_id, \ @@ -275,9 +285,11 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { }, \ .min_uV = (min) * 1000, \ .max_uV = (max) * 1000, \ + .update_bank = bank, \ .update_reg = reg, \ .mask = reg_mask, \ .enable = reg_enable, \ + .voltage_bank = volt_bank, \ .voltage_reg = volt_reg, \ .voltage_mask = volt_mask, \ .supported_voltages = voltages, \ @@ -285,8 +297,8 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { .fixed_uV = 0, \ } -#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \ - reg_enable) \ +#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \ + reg_mask, reg_enable) \ { \ .desc = { \ .name = "LDO-" #_id, \ @@ -296,6 +308,7 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { .owner = THIS_MODULE, \ }, \ .fixed_uV = fixed * 1000, \ + .update_bank = bank, \ .update_reg = reg, \ .mask = reg_mask, \ .enable = reg_enable, \ @@ -304,28 +317,29 @@ static struct regulator_ops ab8500_ldo_fixed_ops = { static struct ab8500_regulator_info ab8500_regulator_info[] = { /* * Variable Voltage LDOs - * name, min uV, max uV, ctrl reg, reg mask, enable mask, - * volt ctrl reg, volt ctrl mask, volt table, num supported volts + * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask, + * volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table, + * num supported volts */ - AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf, + AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf, ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), - AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf, + AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf, ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), - AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf, + AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf, ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), - AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38, + AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38, ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)), /* * Fixed Voltage LDOs - * name, o/p uV, ctrl reg, enable, disable + * name, o/p uV, ctrl bank, ctrl reg, enable, disable */ - AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2), - AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2), - AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4), - AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8), - AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10), - AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4), + AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x2, 0x2), + AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2), + AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x4, 0x4), + AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x8, 0x8), + AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x10, 0x10), + AB8500_FIXED_LDO(ANA, 1200, 0x03, 0x83, 0xc, 0x4), }; static inline struct ab8500_regulator_info *find_regulator_info(int id) diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c index 2fda031..e346705 100644 --- a/drivers/rtc/rtc-ab8500.c +++ b/drivers/rtc/rtc-ab8500.c @@ -14,26 +14,26 @@ #include #include #include +#include #include #include -#define AB8500_RTC_SOFF_STAT_REG 0x0F00 -#define AB8500_RTC_CC_CONF_REG 0x0F01 -#define AB8500_RTC_READ_REQ_REG 0x0F02 -#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03 -#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04 -#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05 -#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06 -#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07 -#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08 -#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09 -#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A -#define AB8500_RTC_STAT_REG 0x0F0B -#define AB8500_RTC_BKUP_CHG_REG 0x0F0C -#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D -#define AB8500_RTC_CALIB_REG 0x0F0E -#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F -#define AB8500_REV_REG 0x1080 +#define AB8500_RTC_SOFF_STAT_REG 0x00 +#define AB8500_RTC_CC_CONF_REG 0x01 +#define AB8500_RTC_READ_REQ_REG 0x02 +#define AB8500_RTC_WATCH_TSECMID_REG 0x03 +#define AB8500_RTC_WATCH_TSECHI_REG 0x04 +#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05 +#define AB8500_RTC_WATCH_TMIN_MID_REG 0x06 +#define AB8500_RTC_WATCH_TMIN_HI_REG 0x07 +#define AB8500_RTC_ALRM_MIN_LOW_REG 0x08 +#define AB8500_RTC_ALRM_MIN_MID_REG 0x09 +#define AB8500_RTC_ALRM_MIN_HI_REG 0x0A +#define AB8500_RTC_STAT_REG 0x0B +#define AB8500_RTC_BKUP_CHG_REG 0x0C +#define AB8500_RTC_FORCE_BKUP_REG 0x0D +#define AB8500_RTC_CALIB_REG 0x0E +#define AB8500_RTC_SWITCH_STAT_REG 0x0F /* RtcReadRequest bits */ #define RTC_READ_REQUEST 0x01 @@ -46,13 +46,13 @@ #define COUNTS_PER_SEC (0xF000 / 60) #define AB8500_RTC_EPOCH 2000 -static const unsigned long ab8500_rtc_time_regs[] = { +static const u8 ab8500_rtc_time_regs[] = { AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG, AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG, AB8500_RTC_WATCH_TSECMID_REG }; -static const unsigned long ab8500_rtc_alarm_regs[] = { +static const u8 ab8500_rtc_alarm_regs[] = { AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG, AB8500_RTC_ALRM_MIN_LOW_REG }; @@ -76,29 +76,30 @@ static unsigned long get_elapsed_seconds(int year) static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); unsigned long timeout = jiffies + HZ; int retval, i; unsigned long mins, secs; unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; + u8 value; /* Request a data read */ - retval = ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, - RTC_READ_REQUEST); + retval = abx500_set_register_interruptible(dev, + AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST); if (retval < 0) return retval; /* Early AB8500 chips will not clear the rtc read request bit */ - if (ab8500->revision == 0) { + if (abx500_get_chip_id(dev) == 0) { msleep(1); } else { /* Wait for some cycles after enabling the rtc read in ab8500 */ while (time_before(jiffies, timeout)) { - retval = ab8500_read(ab8500, AB8500_RTC_READ_REQ_REG); + retval = abx500_get_register_interruptible(dev, + AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value); if (retval < 0) return retval; - if (!(retval & RTC_READ_REQUEST)) + if (!(value & RTC_READ_REQUEST)) break; msleep(1); @@ -107,10 +108,11 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) /* Read the Watchtime registers */ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { - retval = ab8500_read(ab8500, ab8500_rtc_time_regs[i]); + retval = abx500_get_register_interruptible(dev, + AB8500_RTC, ab8500_rtc_time_regs[i], &value); if (retval < 0) return retval; - buf[i] = retval; + buf[i] = value; } mins = (buf[0] << 16) | (buf[1] << 8) | buf[2]; @@ -128,7 +130,6 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); int retval, i; unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; unsigned long no_secs, no_mins, secs = 0; @@ -162,27 +163,29 @@ static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm) buf[0] = (no_mins >> 16) & 0xFF; for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { - retval = ab8500_write(ab8500, ab8500_rtc_time_regs[i], buf[i]); + retval = abx500_set_register_interruptible(dev, AB8500_RTC, + ab8500_rtc_time_regs[i], buf[i]); if (retval < 0) return retval; } /* Request a data write */ - return ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST); + return abx500_set_register_interruptible(dev, AB8500_RTC, + AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST); } static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); int retval, i; - int rtc_ctrl; + u8 rtc_ctrl, value; unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; unsigned long secs, mins; /* Check if the alarm is enabled or not */ - rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG); - if (rtc_ctrl < 0) - return rtc_ctrl; + retval = abx500_get_register_interruptible(dev, AB8500_RTC, + AB8500_RTC_STAT_REG, &rtc_ctrl); + if (retval < 0) + return retval; if (rtc_ctrl & RTC_ALARM_ENA) alarm->enabled = 1; @@ -192,10 +195,11 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) alarm->pending = 0; for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { - retval = ab8500_read(ab8500, ab8500_rtc_alarm_regs[i]); + retval = abx500_get_register_interruptible(dev, AB8500_RTC, + ab8500_rtc_alarm_regs[i], &value); if (retval < 0) return retval; - buf[i] = retval; + buf[i] = value; } mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]); @@ -211,15 +215,13 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); - - return ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_ALARM_ENA, - enabled ? RTC_ALARM_ENA : 0); + return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC, + AB8500_RTC_STAT_REG, RTC_ALARM_ENA, + enabled ? RTC_ALARM_ENA : 0); } static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); int retval, i; unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; unsigned long mins, secs = 0; @@ -247,7 +249,8 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) /* Set the alarm time */ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { - retval = ab8500_write(ab8500, ab8500_rtc_alarm_regs[i], buf[i]); + retval = abx500_set_register_interruptible(dev, AB8500_RTC, + ab8500_rtc_alarm_regs[i], buf[i]); if (retval < 0) return retval; } @@ -276,10 +279,9 @@ static const struct rtc_class_ops ab8500_rtc_ops = { static int __devinit ab8500_rtc_probe(struct platform_device *pdev) { - struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); int err; struct rtc_device *rtc; - int rtc_ctrl; + u8 rtc_ctrl; int irq; irq = platform_get_irq_byname(pdev, "ALARM"); @@ -287,17 +289,18 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) return irq; /* For RTC supply test */ - err = ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_STATUS_DATA, - RTC_STATUS_DATA); + err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC, + AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA); if (err < 0) return err; /* Wait for reset by the PorRtc */ msleep(1); - rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG); - if (rtc_ctrl < 0) - return rtc_ctrl; + err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC, + AB8500_RTC_STAT_REG, &rtc_ctrl); + if (err < 0) + return err; /* Check if the RTC Supply fails */ if (!(rtc_ctrl & RTC_STATUS_DATA)) { diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index f5cec45..d63b605 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -10,6 +10,29 @@ #include /* + * AB8500 bank addresses + */ +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_OTP_EMUL 0x15 + +/* * Interrupts */ @@ -99,6 +122,7 @@ struct ab8500 { int revision; int irq_base; int irq; + u8 chip_id; int (*write) (struct ab8500 *a8500, u16 addr, u8 data); int (*read) (struct ab8500 *a8500, u16 addr); @@ -124,10 +148,6 @@ struct ab8500_platform_data { struct regulator_init_data *regulator[AB8500_NUM_REGULATORS]; }; -extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data); -extern int ab8500_read(struct ab8500 *a8500, u16 addr); -extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data); - extern int __devinit ab8500_init(struct ab8500 *ab8500); extern int __devexit ab8500_exit(struct ab8500 *ab8500); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 390726f..be7373c 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -6,8 +6,7 @@ * * ABX500 core access functions. * The abx500 interface is used for the Analog Baseband chip - * ab3100, ab3550, ab5500 and possibly comming. It is not used for - * ab4500 and ab8500 since they are another family of chip. + * ab3100, ab3550, ab5500, and ab8500. * * Author: Mattias Wallin * Author: Mattias Nilsson -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/