Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 4 Jun 2002 03:03:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 4 Jun 2002 03:02:59 -0400 Received: from front1.mail.megapathdsl.net ([66.80.60.31]:55312 "EHLO front1.mail.megapathdsl.net") by vger.kernel.org with ESMTP id ; Tue, 4 Jun 2002 03:02:57 -0400 Subject: 2.5.20 -- Hanging (no oops and sysrq fails) after switching to rivafb From: Miles Lane To: linux-kernel@vger.kernel.org, jsimmons@transvirtual.com Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.5.99 Date: 04 Jun 2002 00:23:37 -0700 Message-Id: <1023175418.7859.32.camel@agate> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I tried booting both with acpi enabled and with pci=noacpi set. When the machine freezes, the VT display mode has just switched to using rivafb (video=riva:1600x1200-16). I have reported with previous 2.5 builds that my rivafb has been working for me with the exception that the colors have been wrong. This time, the video mode is wrong and the display is messed up. After the freeze, no disk activity occurs and the Caps Lock, Num Lock and so on don't work. No oops message is shown. I apologize for the size of this post. I imagine that you'll also need lspci -v and .config information, but I'll wait for someone to ask for it. Linux version 2.5.20 (root@turbulence.megapathdsl.net) (gcc version 3.0.4 (Red Hat Linux 7.2 3.0.4-1)) #22Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable) BIOS-e820: 000000000ffe0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65504 zone(0): 4096 pages. zone(1): 61408 pages. zone(2): 0 pages. ACPI: RSDP (v000 AMI ) @ 0x000fae70 ACPI: RSDT (v001 GATEWA 8DT-084 00529.06553) @ 0x0fff0000 ACPI: FADT (v001 GATEWA 8DT-084 00529.06553) @ 0x0fff1000 ACPI: MADT not present Kernel command line: ro root=/dev/hda6 hdd=ide-scsi console=ttyS0,38400 console=tty0 video=riva:1600x1200-16 ide_setup: hdd=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 848.370 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1690.82 BogoMIPS Memory: 255648k/262016k available (2231k kernel code, 5980k reserved, 566k data, 256k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Machine check exception polling timer started. Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check reporting enabled on CPU#0. WARNING: This combination of AMD processors is not suitable for SMP. CPU0: AMD Athlon(tm) Processor stepping 01 per-CPU timeslice cutoff: 1462.63 usecs. task migration cache decay timeout: 10 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 848.3522 MHz. ..... host bus clock speed is 199.6121 MHz. cpu: 0, clocks: 1996121, slice: 998060 CPU0 migration_task 0 on cpu=0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfdad1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20020517 tbxface-0100 [03] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:................................................................................... Table [DSDT] - 271 Objects with 26 Devices 83 Methods 15 Regions ACPI Namespace successfully loaded at root c0450d7c evxfevnt-0076 [04] Acpi_enable : Transition to ACPI mode successful Executing all Device _STA and_INI methods:............... exfldio-0098 [47] Ex_setup_region : Field) exfldio-0108 [47] Ex_setup_region : Field [PS2E] Base+Offset+Width 0+0+4 is beyond end of region [) uteval-0430 [34] Ut_execute_STA : No object was returned from _STA ........... 26 Devices found containing: 25 _STA, 2 _INI methods Completing Region/Field/Buffer/Package initialization:.......................................... Initialized 12/15 Regions 1/1 Fields 21/21 Buffers 8/9 Packages (271 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) exfldio-0098 [76] Ex_setup_region : Field [PS2E] access width (4 bytes) too large for region [PSRG) exfldio-0108 [76] Ex_setup_region : Field [PS2E] Base+Offset+Width 0+0+4 is beyond end of region [)pci_link-0152 [114] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [116] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [118] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [120] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:07.4 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:0f.0 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:11.0 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:11.1 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:11.2 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:12.0 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:13.0 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:14.0 PCI: No IRQ known for interrupt pin A of device 00:14.0 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 00:14.1 PCI: No IRQ known for interrupt pin B of device 00:14.1 pci_link-0465 [116] acpi_pci_link_get_irq : Invalid link context pci_irq-0288 [115] acpi_pci_irq_derive : Unable to derive IRQ for device 01:05.0 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' Starting kswapd BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec: init pool 0, 1 entries, 12 bytes biovec: init pool 1, 4 entries, 48 bytes biovec: init pool 2, 16 entries, 192 bytes biovec: init pool 3, 64 entries, 768 bytes biovec: init pool 4, 128 entries, 1536 bytes biovec: init pool 5, 256 entries, 3072 bytes Journalled Block Device driver loaded NTFS driver 2.0.7 [Flags: R/O DEBUG]. Copyright (c) 2001,2002 Anton Altaparmakov. udf: registering filesystem ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) rivafb: RIVA MTRR set to ON ----------------------------------------------------------- With "pci=noacpi" set: Linux version 2.5.20 (root@turbulence.megapathdsl.net) (gcc version 3.0.4 (Red Hat Linux 7.2 3.0.4-1)) #22Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable) BIOS-e820: 000000000ffe0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65504 zone(0): 4096 pages. zone(1): 61408 pages. zone(2): 0 pages. ACPI: RSDP (v000 AMI ) @ 0x000fae70 ACPI: RSDT (v001 GATEWA 8DT-084 00529.06553) @ 0x0fff0000 ACPI: FADT (v001 GATEWA 8DT-084 00529.06553) @ 0x0fff1000 ACPI: MADT not present Kernel command line: ro root=/dev/hda6 hdd=ide-scsi console=ttyS0,38400 console=tty0 pci=noacpi video=riva:1600x1200-16 ide_setup: hdd=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 848.372 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1690.82 BogoMIPS Memory: 255648k/262016k available (2231k kernel code, 5980k reserved, 566k data, 256k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Machine check exception polling timer started. Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check reporting enabled on CPU#0. WARNING: This combination of AMD processors is not suitable for SMP. CPU0: AMD Athlon(tm) Processor stepping 01 per-CPU timeslice cutoff: 1462.63 usecs. task migration cache decay timeout: 10 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 848.3206 MHz. ..... host bus clock speed is 199.6048 MHz. cpu: 0, clocks: 1996048, slice: 998024 CPU0 migration_task 0 on cpu=0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfdad1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20020517 tbxface-0100 [03] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:................................................................................... Table [DSDT] - 271 Objects with 26 Devices 83 Methods 15 Regions ACPI Namespace successfully loaded at root c0450d7c evxfevnt-0076 [04] Acpi_enable : Transition to ACPI mode successful Executing all Device _STA and_INI methods:............... exfldio-0098 [47] Ex_setup_region : Field) exfldio-0108 [47] Ex_setup_region : Field [PS2E] Base+Offset+Width 0+0+4 is beyond end of region [) uteval-0430 [34] Ut_execute_STA : No object was returned from _STA ........... 26 Devices found containing: 25 _STA, 2 _INI methods Completing Region/Field/Buffer/Package initialization:.......................................... Initialized 12/15 Regions 1/1 Fields 21/21 Buffers 8/9 Packages (271 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) exfldio-0098 [76] Ex_setup_region : Field [PS2E] access width (4 bytes) too large for region [PSRG) exfldio-0108 [76] Ex_setup_region : Field [PS2E] Base+Offset+Width 0+0+4 is beyond end of region [)pci_link-0152 [114] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [116] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [118] acpi_pci_link_get_poss: Resource is not an IRQ entry pci_link-0152 [120] acpi_pci_link_get_poss: Resource is not an IRQ entry PCI: Probing PCI hardware Starting kswapd BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec: init pool 0, 1 entries, 12 bytes biovec: init pool 1, 4 entries, 48 bytes biovec: init pool 2, 16 entries, 192 bytes biovec: init pool 3, 64 entries, 768 bytes biovec: init pool 4, 128 entries, 1536 bytes biovec: init pool 5, 256 entries, 3072 bytes Journalled Block Device driver loaded NTFS driver 2.0.7 [Flags: R/O DEBUG]. Copyright (c) 2001,2002 Anton Altaparmakov. udf: registering filesystem ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) rivafb: RIVA MTRR set to ON - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/