Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754693Ab0HXJpa (ORCPT ); Tue, 24 Aug 2010 05:45:30 -0400 Received: from torres.zugschlus.de ([85.214.131.164]:52191 "EHLO torres.zugschlus.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754069Ab0HXJpZ (ORCPT ); Tue, 24 Aug 2010 05:45:25 -0400 Date: Tue, 24 Aug 2010 11:45:24 +0200 From: Marc Haber To: Linux Kernel Developers , Linux Kernel Network Developers , "e1000-devel@lists.sourceforge.net" Subject: No link on e1000e with 2.6.35.3 and ThinkPad T60 Message-ID: <20100824094524.GA17608@torres.zugschlus.de> References: <20100724092644.GA13353@torres.zugschlus.de> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20100724092644.GA13353@torres.zugschlus.de> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 62082 Lines: 983 Hi, On Sat, Jul 24, 2010 at 11:26:44AM +0200, Marc Haber wrote: > Additionally, sometimes, probably after suspend/resume, the wired > ethernet does not come up properly again, ip addr claims "NO CARRIER" > even if the LEDs on the interface and on the switch claim that there > was a link. No packets are received by the interface when it's at this > stage. As of 2.6.35.3, this issue has become worse. It now even happens directly after freshly booting the system that I cannot get a link on the wired ethernet. What information do you need to find out what's going on there? Please Cc: me on replies Greetings Marc $ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbag Wake-on: g Current message level: 0x00000001 (1) Link detected: no $ [ 0.000000] #38 [0002810840 - 0002810850] BOOTMEM [ 0.000000] #39 [0002810880 - 00028108f3] BOOTMEM [ 0.000000] #40 [0002810900 - 0002810973] BOOTMEM [ 0.000000] #41 [0002c00000 - 0002c10000] BOOTMEM [ 0.000000] #42 [0002e00000 - 0002e10000] BOOTMEM [ 0.000000] #43 [0002812980 - 0002812984] BOOTMEM [ 0.000000] #44 [00028129c0 - 00028129c4] BOOTMEM [ 0.000000] #45 [0002812a00 - 0002812a08] BOOTMEM [ 0.000000] #46 [0002812a40 - 0002812a48] BOOTMEM [ 0.000000] #47 [0002812a80 - 0002812b28] BOOTMEM [ 0.000000] #48 [0002812b40 - 0002812ba8] BOOTMEM [ 0.000000] #49 [0002812bc0 - 0002816bc0] BOOTMEM [ 0.000000] #50 [0002816bc0 - 0002896bc0] BOOTMEM [ 0.000000] #51 [0002896bc0 - 00028d6bc0] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfed0) [ 0.000000] Memory: 3106840k/3144512k available (2664k kernel code, 37280k reserved, 1196k data, 468k init, 2235208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc04c6000 - 0xc053b000 ( 468 kB) [ 0.000000] .data : 0xc039a0a3 - 0xc04c50dc (1196 kB) [ 0.000000] .text : 0xc0100000 - 0xc039a0a3 (2664 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:384 [ 0.000000] CPU 0 irqstacks, hard=c2c00000 soft=c2c01000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2161.193 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.38 BogoMIPS (lpj=8644772) [ 0.004018] pid_max: default: 32768 minimum: 301 [ 0.004107] Security Framework initialized [ 0.004150] Mount-cache hash table entries: 512 [ 0.004406] CPU: Physical Processor ID: 0 [ 0.004410] CPU: Processor Core ID: 0 [ 0.004417] mce: CPU supports 6 MCE banks [ 0.004433] CPU0: Thermal monitoring enabled (TM2) [ 0.004440] using mwait in idle threads. [ 0.004451] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.004463] PEBS disabled due to CPU errata. [ 0.004474] ... version: 2 [ 0.004478] ... bit width: 40 [ 0.004482] ... generic registers: 2 [ 0.004486] ... value mask: 000000ffffffffff [ 0.004491] ... max period: 000000007fffffff [ 0.004496] ... fixed-purpose events: 3 [ 0.004500] ... event mask: 0000000700000003 [ 0.006434] ACPI: Core revision 20100428 [ 0.040017] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040027] ftrace: allocating 13849 entries in 28 pages [ 0.044069] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086084] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.104036] CPU 1 irqstacks, hard=c2e00000 soft=c2e01000 [ 0.104047] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.196000] TSC synchronization [CPU#0 -> CPU#1]: [ 0.196000] Measured 668564 cycles TSC warp between CPUs, turning off TSC clock. [ 0.196000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.196032] Brought up 2 CPUs [ 0.196037] Total of 2 processors activated (8644.99 BogoMIPS). [ 0.200073] devtmpfs: initialized [ 0.200266] regulator: core version 0.5 [ 0.200266] NET: Registered protocol family 16 [ 0.200266] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.200266] ACPI: bus type pci registered [ 0.200266] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.200266] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.200266] PCI: Using MMCONFIG for extended config space [ 0.200266] PCI: Using configuration type 1 for base access [ 0.204080] bio: create slab at 0 [ 0.212480] ACPI: EC: EC description table is found, configuring boot EC [ 0.237152] ACPI: SSDT bfef1d36 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.237613] ACPI: Dynamic OEM Table Load: [ 0.237613] ACPI: SSDT (null) 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.237613] ACPI: SSDT bfef203d 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.241054] ACPI: Dynamic OEM Table Load: [ 0.241062] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.241866] ACPI: SSDT bfef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.243315] ACPI: Dynamic OEM Table Load: [ 0.243323] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.243609] ACPI: SSDT bfef1fb8 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.245058] ACPI: Dynamic OEM Table Load: [ 0.245065] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.245281] ACPI: Interpreter enabled [ 0.245288] ACPI: (supports S0 S3 S4 S5) [ 0.245336] ACPI: Using IOAPIC for interrupt routing [ 0.264726] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.268107] ACPI: Power Resource [PUBS] (on) [ 0.272897] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.272907] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.273751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.273817] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.273817] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored) [ 0.273817] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:01.0: PME# disabled [ 0.273817] pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit] [ 0.273817] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1b.0: PME# disabled [ 0.273817] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1c.0: PME# disabled [ 0.273817] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1c.1: PME# disabled [ 0.273817] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1c.2: PME# disabled [ 0.273817] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1c.3: PME# disabled [ 0.273817] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.273817] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.273817] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.273817] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.273817] pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff] [ 0.273817] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.273817] pci 0000:00:1d.7: PME# disabled [ 0.273820] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.273828] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.273836] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.273844] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.273852] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.273924] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.273937] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.273950] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.273962] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.273974] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f] [ 0.274053] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf] [ 0.274066] pci 0000:00:1f.2: reg 14: [io 0x18ac-0x18af] [ 0.274078] pci 0000:00:1f.2: reg 18: [io 0x18c0-0x18c7] [ 0.274091] pci 0000:00:1f.2: reg 1c: [io 0x18a8-0x18ab] [ 0.274103] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] [ 0.274116] pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff] [ 0.274168] pci 0000:00:1f.2: PME# supported from D3hot [ 0.276009] pci 0000:00:1f.2: PME# disabled [ 0.276093] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] [ 0.276281] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.276308] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.276335] pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff] [ 0.276425] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.276539] pci 0000:01:00.0: supports D1 D2 [ 0.276596] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.276603] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.276611] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff] [ 0.276621] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.276770] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff] [ 0.276801] pci 0000:02:00.0: reg 18: [io 0x3000-0x301f] [ 0.276930] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.276941] pci 0000:02:00.0: PME# disabled [ 0.276979] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.276987] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.276996] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.277010] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.277240] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff] [ 0.277507] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.277523] pci 0000:03:00.0: PME# disabled [ 0.277585] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.277593] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff] [ 0.277602] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.277616] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.277699] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.277708] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff] [ 0.277717] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.277730] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.277814] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.277823] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff] [ 0.277832] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.277845] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.277937] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff] [ 0.277977] pci 0000:15:00.0: supports D1 D2 [ 0.277982] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277992] pci 0000:15:00.0: PME# disabled [ 0.278087] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.278096] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff] [ 0.278105] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.278118] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.278124] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.278130] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.278251] pci_bus 0000:00: on NUMA node 0 [ 0.278260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.278529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.278670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.278810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.278949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.279103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.279257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.288571] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.292074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.292440] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11) [ 0.292802] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11) [ 0.293164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11) [ 0.293527] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.293888] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.294249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.294410] HEST: Table is not found! [ 0.294410] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.294410] vgaarb: loaded [ 0.294410] SCSI subsystem initialized [ 0.294410] usbcore: registered new interface driver usbfs [ 0.294410] usbcore: registered new interface driver hub [ 0.294410] usbcore: registered new device driver usb [ 0.294410] PCI: Using ACPI for IRQ routing [ 0.294410] PCI: pci_cache_line_size set to 64 bytes [ 0.296085] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.296091] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff [ 0.296141] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.296141] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.296141] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.300078] Switching to clocksource hpet [ 0.304122] pnp: PnP ACPI init [ 0.304141] ACPI: bus type pnp registered [ 0.311754] pnp: PnP ACPI: found 11 devices [ 0.311759] ACPI: ACPI bus type pnp unregistered [ 0.311780] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.311788] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.311794] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.311801] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.311807] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.311813] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.311820] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.311826] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.311833] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.311839] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.311845] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.311852] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.311859] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.311866] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved [ 0.311881] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.311887] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.311893] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.311900] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.311906] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.311912] system 00:02: [io 0x1600-0x165f] could not be reserved [ 0.311919] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.311925] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.311932] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.311940] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.311947] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.347522] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.347531] pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref] [ 0.347538] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.347544] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.347553] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff] [ 0.347560] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.347570] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.347577] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.347588] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.347597] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.347610] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.347616] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff] [ 0.347627] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.347636] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.347649] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.347656] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff] [ 0.347666] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.347675] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.347688] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.347695] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff] [ 0.347705] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.347714] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.347729] pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref] [ 0.347736] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff] [ 0.347742] pci 0000:15:00.0: BAR 7: assigned [io 0xa000-0xa0ff] [ 0.347748] pci 0000:15:00.0: BAR 8: assigned [io 0xa400-0xa4ff] [ 0.347753] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.347758] pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff] [ 0.347768] pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff] [ 0.347778] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] [ 0.347788] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] [ 0.347798] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.347804] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff] [ 0.347815] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.347824] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.347852] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.347860] pci 0000:00:01.0: setting latency timer to 64 [ 0.347879] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.347888] pci 0000:00:1c.0: setting latency timer to 64 [ 0.347906] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.347915] pci 0000:00:1c.1: setting latency timer to 64 [ 0.347934] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.347942] pci 0000:00:1c.2: setting latency timer to 64 [ 0.347961] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.347969] pci 0000:00:1c.3: setting latency timer to 64 [ 0.347979] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.347990] pci 0000:00:1e.0: setting latency timer to 64 [ 0.348030] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348042] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.348047] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.348053] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.348058] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff] [ 0.348064] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.348070] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.348075] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] [ 0.348080] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.348086] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff] [ 0.348091] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] [ 0.348096] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.348102] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff] [ 0.348107] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] [ 0.348112] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.348118] pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff] [ 0.348123] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] [ 0.348128] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.348134] pci_bus 0000:15: resource 0 [io 0xa000-0xdfff] [ 0.348139] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] [ 0.348145] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.348150] pci_bus 0000:15: resource 4 [io 0x0000-0xffff] [ 0.348155] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffff] [ 0.348161] pci_bus 0000:16: resource 0 [io 0xa000-0xa0ff] [ 0.348166] pci_bus 0000:16: resource 1 [io 0xa400-0xa4ff] [ 0.348171] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] [ 0.348176] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.348287] NET: Registered protocol family 2 [ 0.348426] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.348925] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.349601] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.349908] TCP: Hash tables configured (established 131072 bind 65536) [ 0.349913] TCP reno registered [ 0.349919] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.349933] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.350100] NET: Registered protocol family 1 [ 0.350304] pci 0000:01:00.0: Boot video device [ 0.350376] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.350463] Unpacking initramfs... [ 3.062966] Freeing initrd memory: 6812k freed [ 3.067836] Simple Boot Flag at 0x35 set to 0x1 [ 3.069089] apm: BIOS not found. [ 3.069861] audit: initializing netlink socket (disabled) [ 3.069891] type=2000 audit(1282647962.068:1): initialized [ 3.070257] highmem bounce pool size: 64 pages [ 3.070840] msgmni has been set to 1715 [ 3.071183] alg: No test for stdrng (krng) [ 3.071313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 3.071319] io scheduler noop registered [ 3.071324] io scheduler deadline registered [ 3.071363] io scheduler cfq registered (default) [ 3.071594] pcieport 0000:00:01.0: setting latency timer to 64 [ 3.071652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 3.071889] pcieport 0000:00:1c.0: setting latency timer to 64 [ 3.071962] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 3.072320] pcieport 0000:00:1c.1: setting latency timer to 64 [ 3.072393] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 3.072739] pcieport 0000:00:1c.2: setting latency timer to 64 [ 3.072812] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 3.073265] pcieport 0000:00:1c.3: setting latency timer to 64 [ 3.073338] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 3.074482] intel_idle: MWAIT substates: 0x22220 [ 3.074487] intel_idle: does not run on family 6 model 15 [ 3.075065] ACPI: AC Adapter [AC] (off-line) [ 3.075347] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 3.075581] ACPI: Lid Switch [LID] [ 3.075753] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.075759] ACPI: Sleep Button [SLPB] [ 3.075945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.075950] ACPI: Power Button [PWRF] [ 3.076153] ACPI: acpi_idle registered with cpuidle [ 3.081107] Monitor-Mwait will be used to enter C-1 state [ 3.081162] Monitor-Mwait will be used to enter C-2 state [ 3.081215] Monitor-Mwait will be used to enter C-3 state [ 3.092443] thermal LNXTHERM:01: registered as thermal_zone0 [ 3.092463] ACPI: Thermal Zone [THM0] (52 C) [ 3.094942] thermal LNXTHERM:02: registered as thermal_zone1 [ 3.094959] ACPI: Thermal Zone [THM1] (49 C) [ 3.095152] ERST: Table is not found! [ 3.095156] GHES: HEST is not enabled! [ 3.095160] EINJ: Table is not found! [ 3.095179] isapnp: Scanning for PnP cards... [ 3.113146] ACPI: Battery Slot [BAT0] (battery present) [ 3.451028] isapnp: No Plug & Play device found [ 3.458735] nsc_gpio initializing [ 3.458739] ramoops: invalid size specification [ 3.458874] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 6.472033] floppy0: no floppy controllers found [ 6.472750] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 6.481694] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.481707] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.481939] mice: PS/2 mouse device common for all mice [ 6.482663] cpuidle: using governor ladder [ 6.483850] cpuidle: using governor menu [ 6.484079] GACT probability on [ 6.484578] NET: Registered protocol family 17 [ 6.484605] NET: Registered protocol family 15 [ 6.484623] Using IPI No-Shortcut mode [ 6.486844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 6.493504] registered taskstats version 1 [ 6.494296] Freeing unused kernel memory: 468k freed [ 6.494644] Write protecting the kernel text: 2668k [ 6.494728] Write protecting the kernel read-only data: 940k [ 6.609172] udev: starting version 161 [ 6.715258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.756657] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 6.759457] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 6.759481] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 6.759518] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.759525] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.759638] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.759673] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 6.759693] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.763589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 6.763623] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 6.840043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.840110] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.840116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.840122] usb usb1: Product: EHCI Host Controller [ 6.840127] usb usb1: Manufacturer: Linux 2.6.35.3-zgws1 ehci_hcd [ 6.840131] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.840358] hub 1-0:1.0: USB hub found [ 6.840368] hub 1-0:1.0: 8 ports detected [ 6.849725] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 6.849731] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 6.849794] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.849826] e1000e 0000:02:00.0: setting latency timer to 64 [ 6.850080] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 6.850579] e1000e 0000:02:00.0: Disabling ASPM L0s [ 6.877757] uhci_hcd: USB Universal Host Controller Interface driver [ 6.878071] Linux agpgart interface v0.103 [ 6.878410] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6.878778] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6.878792] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.878806] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.878813] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.878965] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.879030] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 6.879096] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.879102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.879108] usb usb2: Product: UHCI Host Controller [ 6.879112] usb usb2: Manufacturer: Linux 2.6.35.3-zgws1 uhci_hcd [ 6.879117] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.879454] hub 2-0:1.0: USB hub found [ 6.879465] hub 2-0:1.0: 2 ports detected [ 6.879601] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.879613] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.879620] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.879752] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.879806] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 6.879867] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.879873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.879878] usb usb3: Product: UHCI Host Controller [ 6.879883] usb usb3: Manufacturer: Linux 2.6.35.3-zgws1 uhci_hcd [ 6.879888] usb usb3: SerialNumber: 0000:00:1d.1 [ 6.880249] hub 3-0:1.0: USB hub found [ 6.880260] hub 3-0:1.0: 2 ports detected [ 6.880652] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 6.880917] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 6.880932] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.880944] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.880951] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.881023] libata version 3.00 loaded. [ 6.881116] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 6.881178] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 6.881268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.881274] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.881280] usb usb4: Product: UHCI Host Controller [ 6.881284] usb usb4: Manufacturer: Linux 2.6.35.3-zgws1 uhci_hcd [ 6.881289] usb usb4: SerialNumber: 0000:00:1d.2 [ 6.881651] hub 4-0:1.0: USB hub found [ 6.881661] hub 4-0:1.0: 2 ports detected [ 6.881806] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 6.881818] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6.881831] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 6.881978] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 6.882028] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 6.882101] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.882107] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.882112] usb usb5: Product: UHCI Host Controller [ 6.882123] usb usb5: Manufacturer: Linux 2.6.35.3-zgws1 uhci_hcd [ 6.882127] usb usb5: SerialNumber: 0000:00:1d.3 [ 6.882487] hub 5-0:1.0: USB hub found [ 6.882497] hub 5-0:1.0: 2 ports detected [ 6.892735] acpi device:05: registered as cooling_device2 [ 6.893113] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input4 [ 6.893127] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 6.910914] ata_piix 0000:00:1f.1: version 2.13 [ 6.910938] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 6.911005] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 6.917860] scsi0 : ata_piix [ 6.918154] scsi1 : ata_piix [ 6.919479] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 6.919486] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 6.920126] ata2: port disabled. ignoring. [ 6.969136] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:6a:07:60 [ 6.969144] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.969287] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 7.084852] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60R, max UDMA/100 [ 7.084860] ata1.00: 156301488 sectors, multi 16: LBA48 [ 7.101820] ata1.00: configured for UDMA/100 [ 7.102087] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5 [ 7.112470] ahci 0000:00:1f.2: version 3.0 [ 7.112500] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 7.112615] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 7.112710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 7.112718] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 7.112729] ahci 0000:00:1f.2: setting latency timer to 64 [ 7.112908] scsi2 : ahci [ 7.113167] scsi3 : ahci [ 7.113370] scsi4 : ahci [ 7.113560] scsi5 : ahci [ 7.113797] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 46 [ 7.113803] ata4: DUMMY [ 7.113806] ata5: DUMMY [ 7.113809] ata6: DUMMY [ 7.120460] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 7.120577] sd 0:0:0:0: [sda] Write Protect is off [ 7.120584] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.120633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.121056] sda: sda1 [ 7.150518] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.432091] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.433439] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7.433448] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7.433456] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7.434500] ata3.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133 [ 7.434507] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.436094] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7.436102] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7.436110] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7.437207] ata3.00: configured for UDMA/133 [ 7.454719] ata3.00: configured for UDMA/133 [ 7.454729] ata3: EH complete [ 7.454986] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 [ 7.455442] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.455670] sd 2:0:0:0: [sdb] Write Protect is off [ 7.455677] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.455768] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.456239] sdb: sdb1 [ 7.480412] sd 2:0:0:0: [sdb] Attached SCSI disk [ 7.585062] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 7.755103] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 7.755111] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.755117] usb 5-1: Product: BCM2045B [ 7.755121] usb 5-1: Manufacturer: Broadcom Corp [ 7.790852] [drm] Initialized drm 1.1.0 20060810 [ 7.855680] [drm] radeon kernel modesetting enabled. [ 7.855863] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 7.855946] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 7.855967] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.855989] radeon 0000:01:00.0: setting latency timer to 64 [ 7.857936] [drm] initializing kernel modesetting (RV515 0x1002:0x7145). [ 7.860170] [drm] register mmio base: 0xEE100000 [ 7.860175] [drm] register mmio size: 65536 [ 7.860549] ATOM BIOS: M54CSP/M52CSP [ 7.860606] [drm] Generation 2 PCI interface, using max accessible memory [ 7.860619] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used) [ 7.860626] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF [ 7.860922] radeon 0000:01:00.0: irq 47 for MSI/MSI-X [ 7.860948] [drm] radeon: using MSI. [ 7.861057] [drm] radeon: irq initialized. [ 7.863061] [drm] Detected VRAM RAM=128M, BAR=128M [ 7.863067] [drm] RAM width 128bits DDR [ 7.863211] [TTM] Zone kernel: Available graphics memory: 439456 kiB. [ 7.863217] [TTM] Zone highmem: Available graphics memory: 1557060 kiB. [ 7.863222] [TTM] Initializing pool allocator. [ 7.863260] [drm] radeon: 128M of VRAM memory ready [ 7.863264] [drm] radeon: 512M of GTT memory ready. [ 7.863304] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.865023] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 7.867491] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 7.867576] [drm] Loading R500 Microcode [ 7.873408] [drm] radeon: ring at 0x0000000008000000 [ 7.873460] [drm] ring test succeeded in 3 usecs [ 7.873789] [drm] radeon: ib pool ready. [ 7.873944] [drm] ib test succeeded in 0 usecs [ 7.873992] [drm] Unknown TV standard; defaulting to NTSC [ 7.874293] [drm] Radeon Display Connectors [ 7.874297] [drm] Connector 0: [ 7.874301] [drm] VGA [ 7.874306] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 7.874311] [drm] Encoders: [ 7.874314] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.874318] [drm] Connector 1: [ 7.874321] [drm] LVDS [ 7.874327] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 7.874331] [drm] Encoders: [ 7.874334] [drm] LCD1: INTERNAL_LVTM1 [ 7.874338] [drm] Connector 2: [ 7.874341] [drm] DVI-I [ 7.874344] [drm] HPD1 [ 7.874349] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 7.874354] [drm] Encoders: [ 7.874357] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 7.946407] [drm] radeon: power management initialized [ 7.997113] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 8.175138] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 8.175145] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.175151] usb 5-2: Product: Biometric Coprocessor [ 8.175155] usb 5-2: Manufacturer: STMicroelectronics [ 8.331765] [drm] fb mappable at 0xD80C0000 [ 8.331771] [drm] vram apper at 0xD8000000 [ 8.331775] [drm] size 7258112 [ 8.331778] [drm] fb depth is 24 [ 8.331782] [drm] pitch is 6912 [ 8.429339] Console: switching to colour frame buffer device 210x65 [ 8.445192] fb0: radeondrmfb frame buffer device [ 8.445197] drm: registered panic notifier [ 8.445203] Slow work thread pool: Starting up [ 8.445400] Slow work thread pool: Ready [ 8.445411] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0 [ 10.473092] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 11.565764] md: raid1 personality registered for level 1 [ 11.637106] raid6: int32x1 342 MB/s [ 11.704077] raid6: int32x2 392 MB/s [ 11.772140] raid6: int32x4 313 MB/s [ 11.840083] raid6: int32x8 236 MB/s [ 11.908044] raid6: mmxx1 1310 MB/s [ 11.976036] raid6: mmxx2 1456 MB/s [ 12.044023] raid6: sse1x1 883 MB/s [ 12.112016] raid6: sse1x2 1069 MB/s [ 12.180037] raid6: sse2x1 1637 MB/s [ 12.248026] raid6: sse2x2 1933 MB/s [ 12.248031] raid6: using algorithm sse2x2 (1933 MB/s) [ 12.250448] xor: automatically using best checksumming function: pIII_sse [ 12.268012] pIII_sse : 3321.000 MB/sec [ 12.268018] xor: using function: pIII_sse (3321.000 MB/sec) [ 12.277791] md: raid6 personality registered for level 6 [ 12.277797] md: raid5 personality registered for level 5 [ 12.277802] md: raid4 personality registered for level 4 [ 15.340383] PM: Starting manual resume from disk [ 15.366451] EXT3-fs: barriers not enabled [ 15.374907] EXT3-fs (dm-12): mounted filesystem with writeback data mode [ 15.375253] kjournald starting. Commit interval 5 seconds [ 17.783591] udev: starting version 161 [ 18.152924] intel_rng: FWH not detected [ 18.169437] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 18.171617] Non-volatile memory driver v1.3 [ 18.246631] cfg80211: Calling CRDA to update world regulatory domain [ 18.320418] rtc_cmos 00:07: RTC can wake from S4 [ 18.320600] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 18.320647] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 18.351034] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012] [ 18.477938] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 18.477947] yenta_cardbus 0000:15:00.0: Socket status: 30000007 [ 18.477959] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff] [ 18.477967] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff: excluding 0xa000-0xa0ff 0xa400-0xa4ff [ 18.489211] Bluetooth: Core ver 2.15 [ 18.489250] NET: Registered protocol family 31 [ 18.489254] Bluetooth: HCI device and connection manager initialized [ 18.489260] Bluetooth: HCI socket layer initialized [ 18.519523] [ 18.519532] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] [ 18.519540] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff [ 18.519576] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 18.519583] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff [ 18.564431] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 18.593117] usbcore: registered new interface driver btusb [ 18.876574] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 18.876581] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 18.876714] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 18.876733] iwl3945 0000:03:00.0: setting latency timer to 64 [ 18.891135] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 [ 18.895704] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f [ 18.898073] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff [ 18.900120] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff [ 18.900246] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 18.900368] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 18.900496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.946627] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 18.946635] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 18.946798] iwl3945 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.017088] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 19.017094] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 19.017099] thinkpad_acpi: ThinkPad BIOS 7IET27WW (1.08 ), EC 79HT50WW-1.07 [ 19.017104] thinkpad_acpi: Lenovo ThinkPad T60, model 87424SG [ 19.017109] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 19.017113] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 19.019448] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 19.019828] thinkpad_acpi: radio switch found; radios are enabled [ 19.019857] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 19.019863] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 19.029712] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 19.030340] Registered led device: tpacpi::thinklight [ 19.030844] Registered led device: tpacpi::power [ 19.031008] Registered led device: tpacpi::standby [ 19.031485] Registered led device: tpacpi::thinkvantage [ 19.033342] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 19.034176] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 19.036324] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 19.039736] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0 [ 19.039744] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 19.054150] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 19.086649] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 19.159271] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 19.159281] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 19.159385] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 19.159443] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.237188] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 20.129173] EXT3-fs (dm-12): using internal journal [ 24.800507] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 25.033225] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 [ 30.181486] coretemp coretemp.0: TjMax is assumed as 100 C! [ 30.181759] coretemp coretemp.1: TjMax is assumed as 100 C! [ 31.836619] Adding 3145208k swap on /dev/mapper/swap0. Priority:-1 extents:1 across:3145208k [ 321.367151] EXT3-fs: barriers not enabled [ 321.376517] kjournald starting. Commit interval 5 seconds [ 321.393057] EXT3-fs (dm-14): using internal journal [ 321.393069] EXT3-fs (dm-14): mounted filesystem with writeback data mode [ 321.419083] EXT3-fs: barriers not enabled [ 321.435435] kjournald starting. Commit interval 5 seconds [ 321.460192] EXT3-fs (dm-17): using internal journal [ 321.460204] EXT3-fs (dm-17): mounted filesystem with writeback data mode [ 321.524249] EXT3-fs: barriers not enabled [ 321.543665] kjournald starting. Commit interval 5 seconds [ 321.548233] EXT3-fs (dm-15): using internal journal [ 321.548244] EXT3-fs (dm-15): mounted filesystem with writeback data mode [ 321.599109] EXT3-fs: barriers not enabled [ 321.607378] kjournald starting. Commit interval 5 seconds [ 321.616163] EXT3-fs (dm-16): using internal journal [ 321.616174] EXT3-fs (dm-16): mounted filesystem with writeback data mode [ 321.663580] EXT3-fs: barriers not enabled [ 321.681868] kjournald starting. Commit interval 5 seconds [ 321.682267] EXT3-fs (dm-18): using internal journal [ 321.682278] EXT3-fs (dm-18): mounted filesystem with writeback data mode [ 321.735516] EXT3-fs: barriers not enabled [ 321.740345] kjournald starting. Commit interval 5 seconds [ 321.744142] EXT3-fs (dm-20): using internal journal [ 321.744152] EXT3-fs (dm-20): mounted filesystem with writeback data mode [ 321.797878] EXT3-fs: barriers not enabled [ 321.815500] kjournald starting. Commit interval 5 seconds [ 321.856253] EXT3-fs (dm-19): using internal journal [ 321.856266] EXT3-fs (dm-19): mounted filesystem with writeback data mode [ 327.426517] NET: Registered protocol family 10 [ 327.427443] lo: Disabled Privacy Extensions [ 327.838732] Bridge firewalling registered [ 329.163680] 802.1Q VLAN Support v1.8 Ben Greear [ 329.163687] All bugs added by David S. Miller [ 330.741567] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 330.797308] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 330.797980] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 331.444515] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 331.530618] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 333.845719] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 333.845728] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 333.845731] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 333.845734] vboxdrv: the usage of hardware performance counters by [ 333.845736] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 333.845744] vboxdrv: Found 2 processor cores. [ 333.845851] vboxdrv: fAsync=1 offMin=0xa2b67 offMax=0xa2b67 [ 333.845951] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 333.845956] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001). [ 335.826167] ip_tables: (C) 2000-2006 Netfilter Core Team [ 335.921665] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 335.921864] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 335.921869] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 335.921874] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 338.833025] br0: no IPv6 routers present [ 339.044693] Bluetooth: L2CAP ver 2.14 [ 339.044698] Bluetooth: L2CAP socket layer initialized [ 339.730088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 339.730095] Bluetooth: BNEP filters: protocol multicast [ 339.931941] Bluetooth: SCO (Voice Link) ver 0.6 [ 339.931947] Bluetooth: SCO socket layer initialized [ 340.499754] Bluetooth: RFCOMM TTY layer initialized [ 340.499765] Bluetooth: RFCOMM socket layer initialized [ 340.499769] Bluetooth: RFCOMM ver 1.11 [ 341.004158] lp: driver loaded but no devices found [ 341.169361] ppdev: user-space parallel port driver [ 343.773076] device eth0 entered promiscuous mode [ 356.000029] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 356.129554] usb 1-6: New USB device found, idVendor=04b3, idProduct=4485 [ 356.129558] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 356.129848] hub 1-6:1.0: USB hub found [ 356.129922] hub 1-6:1.0: 4 ports detected [ 356.401685] usb 1-6.1: new low speed USB device using ehci_hcd and address 5 [ 356.476017] Monitor-Mwait will be used to enter C-3 state [ 356.517315] usb 1-6.1: New USB device found, idVendor=1bcf, idProduct=0007 [ 356.517319] usb 1-6.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 356.517321] usb 1-6.1: Product: USB Optical Mouse [ 356.566607] usbcore: registered new interface driver hiddev [ 356.569998] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/input/input9 [ 356.570458] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.1/input0 [ 356.570675] usbcore: registered new interface driver usbhid [ 356.570678] usbhid: USB HID core driver [ 357.408983] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 359.597108] usb 1-6.3: new high speed USB device using ehci_hcd and address 6 [ 359.693085] usb 1-6.3: New USB device found, idVendor=13fd, idProduct=1340 [ 359.693089] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 359.693092] usb 1-6.3: Product: External [ 359.693094] usb 1-6.3: Manufacturer: Generic [ 359.693096] usb 1-6.3: SerialNumber: 9QG1Z559 [ 359.784921] Initializing USB Mass Storage driver... [ 359.801850] scsi6 : usb-storage 1-6.3:1.0 [ 359.802034] usbcore: registered new interface driver usb-storage [ 359.802037] USB Mass Storage support registered. [ 360.812627] scsi 6:0:0:0: Direct-Access Generic External 1.04 PQ: 0 ANSI: 4 [ 360.814600] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 360.815345] sd 6:0:0:0: [sdc] Write Protect is off [ 360.815349] sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00 [ 360.815352] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 360.816727] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 360.816734] sdc: sdc1 sdc2 sdc3 [ 360.837748] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 360.837752] sd 6:0:0:0: [sdc] Attached SCSI disk [ 364.085084] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 364.086101] input: Logitech Elite Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:11/input10 [ 364.086229] generic-bluetooth 0005:046D:B301.0002: input,hidraw1: BLUETOOTH HID v23.02 Keyboard [Logitech Elite Keyboard] on 00:19:7E:F6:0F:2D [ 371.961530] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 372.538486] device eth0 left promiscuous mode [ 372.622183] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 372.677242] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 372.677773] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 372.879954] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 377.850201] wlan0: authenticate with 00:24:fe:01:97:12 (try 1) [ 377.853703] wlan0: authenticated [ 377.854219] wlan0: associate with 00:24:fe:01:97:12 (try 1) [ 377.874032] wlan0: RX AssocResp from 00:24:fe:01:97:12 (capab=0x431 status=0 aid=1) [ 377.874035] wlan0: associated [ 377.876283] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 384.269049] CE: hpet increased min_delta_ns to 7500 nsec [ 387.936024] wlan0: no IPv6 routers present [ 412.458666] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:12/input11 [ 412.458793] generic-bluetooth 0005:046D:B001.0003: input,hidraw2: BLUETOOTH HID v22.00 Mouse [Logitech MX900 Mouse] on 00:19:7E:F6:0F:2D [ 415.386604] tun: Universal TUN/TAP device driver, 1.6 [ 415.386607] tun: (C) 1999-2004 Max Krasnyansky [ 415.387661] tun0: Disabled Privacy Extensions [ 448.565074] wlan0: deauthenticating from 00:24:fe:01:97:12 by local choice (reason=3) [ 448.611692] cfg80211: Calling CRDA to update world regulatory domain [ 448.704992] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 448.952477] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 449.008212] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 449.008883] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 449.244497] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 449.300213] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 449.300899] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 512.719141] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 512.893054] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 513.145602] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 513.201263] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 513.201930] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 516.041691] CE: hpet increased min_delta_ns to 11250 nsec [ 517.785033] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 518.032489] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 518.089220] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 518.089925] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 518.276821] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 525.979923] wlan0: authenticate with 00:24:fe:01:97:12 (try 1) [ 525.983876] wlan0: authenticated [ 525.983914] wlan0: associate with 00:24:fe:01:97:12 (try 1) [ 525.986924] wlan0: RX AssocResp from 00:24:fe:01:97:12 (capab=0x431 status=0 aid=1) [ 525.986930] wlan0: associated [ 525.988635] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 536.388020] wlan0: no IPv6 routers present [ 678.841587] CE: hpet increased min_delta_ns to 16875 nsec [ 712.538091] usb 1-6: USB disconnect, address 4 [ 712.538098] usb 1-6.1: USB disconnect, address 5 [ 712.560502] usb 1-6.3: USB disconnect, address 6 [ 724.069150] wlan0: deauthenticating from 00:24:fe:01:97:12 by local choice (reason=3) [ 724.224797] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 724.224816] cfg80211: Calling CRDA to update world regulatory domain [ 724.456592] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 724.513342] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 724.514012] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 724.737607] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 724.793247] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 724.793783] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 788.790038] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 788.953160] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 789.204655] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 789.261316] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 789.261998] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 907.217156] usb 1-6: new high speed USB device using ehci_hcd and address 7 [ 907.348507] usb 1-6: New USB device found, idVendor=04b3, idProduct=4485 [ 907.348515] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 907.349162] hub 1-6:1.0: USB hub found [ 907.349342] hub 1-6:1.0: 4 ports detected [ 907.620215] usb 1-6.1: new low speed USB device using ehci_hcd and address 8 [ 907.716957] usb 1-6.1: New USB device found, idVendor=1bcf, idProduct=0007 [ 907.716961] usb 1-6.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 907.716964] usb 1-6.1: Product: USB Optical Mouse [ 907.721160] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/input/input12 [ 907.721328] generic-usb 0003:1BCF:0007.0004: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.1/input0 [ 910.964131] usb 1-6.3: new high speed USB device using ehci_hcd and address 9 [ 911.057374] usb 1-6.3: New USB device found, idVendor=13fd, idProduct=1340 [ 911.057378] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 911.057381] usb 1-6.3: Product: External [ 911.057383] usb 1-6.3: Manufacturer: Generic [ 911.057385] usb 1-6.3: SerialNumber: 9QG1Z559 [ 911.059506] scsi7 : usb-storage 1-6.3:1.0 [ 912.058328] scsi 7:0:0:0: Direct-Access Generic External 1.04 PQ: 0 ANSI: 4 [ 912.061133] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 912.062537] sd 7:0:0:0: [sdc] Write Protect is off [ 912.062540] sd 7:0:0:0: [sdc] Mode Sense: 21 00 00 00 [ 912.062543] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 912.066724] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 912.066732] sdc: sdc1 sdc2 sdc3 [ 912.082246] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 912.082251] sd 7:0:0:0: [sdc] Attached SCSI disk [ 921.728801] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 921.972508] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 922.028259] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 922.028914] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 922.253501] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 922.308255] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 922.308924] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 985.765192] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 986.012471] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 986.065649] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 986.066209] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 994.748266] e1000e 0000:02:00.0: PCI INT A disabled [ 998.921330] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 998.921333] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 998.921442] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 998.921469] e1000e 0000:02:00.0: setting latency timer to 64 [ 998.921746] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 998.921923] e1000e 0000:02:00.0: Disabling ASPM L0s [ 999.036845] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:6a:07:60 [ 999.036849] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 999.036988] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 1002.765033] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1002.897510] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1002.952256] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1002.952921] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1003.144462] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1003.200238] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1003.201139] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1003.433530] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1003.488266] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 1003.488933] ADDRCONF(NETDEV_UP): eth0: link is not ready -- ----------------------------------------------------------------------------- Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/