Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 6 Jun 2002 17:07:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 6 Jun 2002 17:07:17 -0400 Received: from moutvdom00.kundenserver.de ([195.20.224.149]:58898 "EHLO moutvdom00.kundenserver.de") by vger.kernel.org with ESMTP id ; Thu, 6 Jun 2002 17:07:13 -0400 Date: Thu, 6 Jun 2002 21:21:23 +0200 From: Heinz Diehl To: linux-kernel@vger.kernel.org Cc: andre@linux-ide.org Subject: Re: Linux 2.4.19-pre10-ac2 Message-ID: <20020606192123.GA197@chiara.cavy.de> Mail-Followup-To: linux-kernel@vger.kernel.org, andre@linux-ide.org In-Reply-To: <200206051804.g55I4mK19323@devserv.devel.redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: private site in Mannheim/Germany X-PGP-Key: To get my public-key, send mail with subject 'get pgpkey' User-Agent: Mutt/1.5.1i (Linux 2.4.19-pre10-ac2 i586) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed Jun 05 2002, Alan Cox wrote: > Linux 2.4.19pre10-ac2 [....] After updating to pre10-ac2, the second harddisk gives the following error output in dmesg: VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DHEA-36481, ATA DISK drive hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive hdc: CD-540E, ATAPI CD/DVD-ROM drive hdd: CD-W54E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33) hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdb: task_no_data_intr: error=0x04 { DriveStatusError } hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=619/64/63, DMA Partition check: [....] The drive itself works without any problems and is not defective. All partitions are ext3. Here are the IDE related options from .config: CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_TASKFILE_IO=y hdparm -i says: /dev/hdb: Model=Conner Peripherals 1275MB - CFS1275A, FwRev=8.32, SerialNo=EV9228R Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=2477/16/63, TrkSize=40887, SectSize=649, ECCbytes=4 BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=16, MultSect=8 CurCHS=2477/16/63, CurSects=2496816, LBA=yes, LBAsects=2496876 IORDY=on/off, tPIO={min:270,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio3 pio4 DMA modes: mdma0 mdma1 *mdma2 Kernel Drive Geometry LogicalCHS=619/64/63 PhysicalCHS=2477/16/63 Does anybody know how to fix this/ what's the cause? Heinz -- # Heinz Diehl, 68259 Mannheim, Germany - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/