Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754531Ab0KJGaM (ORCPT <rfc822;w@1wt.eu>);
	Wed, 10 Nov 2010 01:30:12 -0500
Received: from mail-iw0-f174.google.com ([209.85.214.174]:34464 "EHLO
	mail-iw0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1752107Ab0KJGaI convert rfc822-to-8bit (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Wed, 10 Nov 2010 01:30:08 -0500
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=gmail.com; s=gamma;
        h=mime-version:in-reply-to:references:date:message-id:subject:from:to
         :cc:content-type:content-transfer-encoding;
        b=phSYxOf/AscAUNykO47eqLtPMLMixAe10xGErwzNZoTC1cI4/AV8MflxwXQyccRWuJ
         0jbi9wjzNUQXYniAepeqI1pOdkxKZwwRJmyoylIPTN8e7W2ABE4rwncvEjRHkIUfU+oW
         1qBlKGKfTqzPwzwgjjvw7arJbc+RyLJN4bNNA=
MIME-Version: 1.0
In-Reply-To: <AANLkTi=vTg1HPNvScvCTaK09pbTYunK-Spc-gKAhUrhu@mail.gmail.com>
References: <AANLkTimm0d2fQMkdw9gA+rOqEcBHtJpAB9JRpYDKOxw=@mail.gmail.com>
	<AANLkTi=bkzZd0c+kM4ZsQ-y0xmMedfB5AhTS+4ohen_P@mail.gmail.com>
	<AANLkTi=vTg1HPNvScvCTaK09pbTYunK-Spc-gKAhUrhu@mail.gmail.com>
Date: Wed, 10 Nov 2010 07:30:07 +0100
Message-ID: <AANLkTi=3RO_ONhx9pebXG57GhrFVqcOFC3nG-MwstWyk@mail.gmail.com>
Subject: Re: error in dmesg
From: Sasa Ostrouska <casaxa@gmail.com>
To: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8BIT
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 6139
Lines: 135

On Wed, Nov 10, 2010 at 1:30 AM, Haojian Zhuang
<haojian.zhuang@gmail.com> wrote:
> On Wed, Nov 10, 2010 at 7:30 AM, Sasa Ostrouska <casaxa@gmail.com> wrote:
>> Sorry, I forgot to mntion that thi is on a 2.6.33.4 slackware 64bit linux.
>>
>>
>> On Wed, Nov 10, 2010 at 12:26 AM, Sasa Ostrouska <casaxa@gmail.com> wrote:
>>> Hi I get this eror during boot on my machine:
>>>
>>> TCP cubic registered
>>> Initializing XFRM netlink socket
>>> NET: Registered protocol family 17
>>> ata1: softreset failed (device not ready)
>>> ata3: softreset failed (device not ready)
>>> ata3: applying SB600 PMP SRST workaround and retrying
>>> ata1: applying SB600 PMP SRST workaround and retrying
>>> usb 1-1: New USB device found, idVendor=0424, idProduct=2502
>>> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>> hub 1-1:1.0: USB hub found
>>> hub 1-1:1.0: 2 ports detected
>>> irq 16: nobody cared (try booting with the "irqpoll" option)
>>> Pid: 0, comm: swapper Not tainted 2.6.33.4 #3
>>> Call Trace:
>>> ?<IRQ> ?[<ffffffff81098d3b>] __report_bad_irq+0x2b/0xa0
>>> ?[<ffffffff81098f3c>] note_interrupt+0x18c/0x1d0
>>> ?[<ffffffff8106c54b>] ? sched_clock_tick+0x5b/0x90
>>> ?[<ffffffff8109961d>] handle_fasteoi_irq+0xbd/0xf0
>>> ?[<ffffffff81005ab2>] handle_irq+0x22/0x30
>>> ?[<ffffffff81a0347c>] do_IRQ+0x6c/0xf0
>>> ?[<ffffffff81a02f93>] ret_from_intr+0x0/0xa
>>> ?<EOI> ?[<ffffffff8100c058>] ? default_idle+0x38/0x80
>>> ?[<ffffffff8100c123>] c1e_idle+0x83/0x100
>>> ?[<ffffffff8106b3da>] ? atomic_notifier_call_chain+0x1a/0x20
>>> ?[<ffffffff8100155d>] cpu_idle+0xad/0x100
>>> ?[<ffffffff819fb727>] start_secondary+0x17b/0x17f
>>> handlers:
>>> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
>>> Disabling IRQ #16
>>> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> ata3.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
>>> ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>>> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata3.00: configured for UDMA/133
>>> ata1.00: ATA-8: WDC WD3200AAKS-00YGA0, 12.01C02, max UDMA/133
>>> ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>>> ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata1.00: configured for UDMA/133
>>> scsi 0:0:0:0: Direct-Access ? ? ATA ? ? ?WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
>>> sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>>> support DPO or FUA
>>> ?sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>>> sd 0:0:0:0: [sda] Attached SCSI disk
>>> usb 5-2: new low speed USB device using ohci_hcd and address 2
>>> ata2: softreset failed (device not ready)
>>> ata2: applying SB600 PMP SRST workaround and retrying
>>> usb 5-2: New USB device found, idVendor=413c, idProduct=3016
>>> usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>>> usb 5-2: Product: Dell Premium USB Optical Mouse
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> ata2.00: ATAPI: Optiarc DVD RW AD-7191S, 1.01, max UDMA/100
>>> ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>>> ata2.00: configured for UDMA/100
>>> scsi 1:0:0:0: CD-ROM ? ? ? ? ? ?Optiarc ?DVD RW AD-7191S ?1.01 PQ: 0 ANSI: 5
>>> sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>>> Uniform CD-ROM driver Revision: 3.20
>>> sr 1:0:0:0: Attached scsi CD-ROM sr0
>>> scsi 2:0:0:0: Direct-Access ? ? ATA ? ? ?WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
>>> sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>>> sd 2:0:0:0: [sdb] Write Protect is off
>>> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>>> sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
>>> support DPO or FUA
>>> ?sdb: sdb1
>>> sd 2:0:0:0: [sdb] Attached SCSI disk
>>> irq 17: nobody cared (try booting with the "irqpoll" option)
>>> Pid: 0, comm: swapper Not tainted 2.6.33.4 #3
>>> Call Trace:
>>> ?<IRQ> ?[<ffffffff81098d3b>] __report_bad_irq+0x2b/0xa0
>>> ?[<ffffffff81098f3c>] note_interrupt+0x18c/0x1d0
>>> ?[<ffffffff8106c54b>] ? sched_clock_tick+0x5b/0x90
>>> ?[<ffffffff8109961d>] handle_fasteoi_irq+0xbd/0xf0
>>> ?[<ffffffff81005ab2>] handle_irq+0x22/0x30
>>> ?[<ffffffff81a0347c>] do_IRQ+0x6c/0xf0
>>> ?[<ffffffff81a02f93>] ret_from_intr+0x0/0xa
>>> ?<EOI> ?[<ffffffff8100c058>] ? default_idle+0x38/0x80
>>> ?[<ffffffff8100c123>] c1e_idle+0x83/0x100
>>> ?[<ffffffff8106b3da>] ? atomic_notifier_call_chain+0x1a/0x20
>>> ?[<ffffffff8100155d>] cpu_idle+0xad/0x100
>>> ?[<ffffffff819fb727>] start_secondary+0x17b/0x17f
>>> handlers:
>>> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
>>> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
>>> Disabling IRQ #17
> Did you return IRQ_HANDLED or IRQ_NONE for #16 & #17 in your irq handler?
>

I have no idea on how to do hat ? I have not touched anything, its a
stock kernel.
If you or somebody else can help me out with that I would appreciate.

>>> registered taskstats version 1
>>> md: Waiting for all devices to be available before autodetect
>>> md: If you don't use raid, use raid=noautodetect
>>> md: Autodetecting RAID arrays.
>>> md: Scanned 0 and added 0 devices.
>>> md: autorun ...
>>> md: ... autorun DONE.
>>>
>>>
>>> Whats going wrong ?
>>>
>>> Rgds
>>> Saxa
>>>
>>> PS: CC me since I'm not on the list.
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at ?http://www.tux.org/lkml/
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/