Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932169Ab0KLNbY (ORCPT ); Fri, 12 Nov 2010 08:31:24 -0500 Received: from smtp.nokia.com ([147.243.1.47]:27356 "EHLO mgw-sa01.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757555Ab0KLNbS (ORCPT ); Fri, 12 Nov 2010 08:31:18 -0500 From: Emeltchenko Andrei To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm@lists.arm.linux.org.uk, linux-serial@vger.kernel.org Subject: [PATCHv5] OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers Date: Fri, 12 Nov 2010 15:29:17 +0200 Message-Id: <1289568557-9727-1-git-send-email-Andrei.Emeltchenko.news@gmail.com> X-Mailer: git-send-email 1.7.0.4 X-Nokia-AV: Clean Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5948 Lines: 149 From: Andrei Emeltchenko Define MDR1 register serial definitions used in serial and bluetooth drivers. Change magic number to ones defined in serial_reg for omap1/2 serial driver. Remove redefined MDR1 register definitions in omap-serial driver. Signed-off-by: Andrei Emeltchenko --- arch/arm/mach-omap1/serial.c | 6 ++++-- arch/arm/mach-omap2/serial.c | 15 +++++++++------ arch/arm/plat-omap/include/plat/omap-serial.h | 3 --- drivers/serial/omap-serial.c | 6 +++--- include/linux/serial_reg.h | 12 ++++++++++++ 5 files changed, 28 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b78d074..c73d1b7 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -52,9 +52,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, */ static void __init omap_serial_reset(struct plat_serial8250_port *p) { - omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_DISABLE); /* disable UART */ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ - omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); /* enable UART */ if (!cpu_is_omap15xx()) { omap_serial_outp(p, UART_OMAP_SYSC, 0x01); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e3..edd7c99 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -168,9 +168,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset, static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_write_reg(uart, UART_OMAP_SCR, 0x08); - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -246,9 +246,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) uart->context_valid = 0; if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x07, 0xA0); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0); else - serial_write_reg(uart, UART_OMAP_MDR1, 0x7); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ efr = serial_read_reg(uart, UART_EFR); serial_write_reg(uart, UART_EFR, UART_EFR_ECB); @@ -267,11 +268,13 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) serial_write_reg(uart, UART_OMAP_SCR, uart->scr); serial_write_reg(uart, UART_OMAP_WER, uart->wer); serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); + if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x00, 0xA1); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1); else /* UART 16x mode */ - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index c8dae02..6a17880 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -31,9 +31,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MDR1_DISABLE 0x07 -#define OMAP_MDR1_MODE13X 0x03 -#define OMAP_MDR1_MODE16X 0x00 #define OMAP_MODE13X_SPEED 230400 /* diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c index 14365f7..03a96db 100644 --- a/drivers/serial/omap-serial.c +++ b/drivers/serial/omap-serial.c @@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); up->efr = serial_in(up, UART_EFR); @@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); else - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); /* Hardware Flow Control Configuration */ diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index c7a0ce1..6f38234 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -341,5 +341,17 @@ #define UART_OMAP_SYSS 0x16 /* System status register */ #define UART_OMAP_WER 0x17 /* Wake-up enable register */ +/* + * These are the definitions for the MDR1 register + */ +#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ +#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ +#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ +#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ +#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ +#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ +#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ +#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ + #endif /* _LINUX_SERIAL_REG_H */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/