Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755740Ab0KOKsT (ORCPT ); Mon, 15 Nov 2010 05:48:19 -0500 Received: from canuck.infradead.org ([134.117.69.58]:60366 "EHLO canuck.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751408Ab0KOKsS convert rfc822-to-8bit (ORCPT ); Mon, 15 Nov 2010 05:48:18 -0500 Subject: Re: [PATCH] clocksource: document some basic concepts From: Peter Zijlstra To: Linus Walleij Cc: linux-kernel@vger.kernel.org, Thomas Gleixner , Nicolas Pitre , Colin Cross , John Stultz , Ingo Molnar , Rabin Vincent In-Reply-To: <1289817228-14838-1-git-send-email-linus.walleij@stericsson.com> References: <1289817228-14838-1-git-send-email-linus.walleij@stericsson.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT Date: Mon, 15 Nov 2010 11:48:14 +0100 Message-ID: <1289818094.2109.487.camel@laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.30.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2764 Lines: 64 On Mon, 2010-11-15 at 11:33 +0100, Linus Walleij wrote: > +sched_clock() > +------------- > + > +In addition to the clock sources and clock events there is a special weak > +function in the kernel called sched_clock(). This function shall return the > +number of nanoseconds since the system was started. An architecture may or > +may not provide an implementation of sched_clock() on its own. > + > +As the name suggests, sched_clock() is used for scheduling the system, > +determining the absolute timeslice for a certain process in the CFS scheduler > +for example. It is also used for printk timestamps when you have selected to > +include time information in printk for things like bootcharts. > + > +Compared to clock sources, sched_clock() has to be very fast: it is called > +much more often, especially by the scheduler. If you have to do trade-offs > +between accuracy compared to the clock source, you may sacrifice accuracy > +for speed in sched_clock(). It however require the same basic characteristics > +as the clock source, i.e. it has to be monotonic. Not so, we prefer it be synchronized and monotonic, but we don't require so, see below. > +The sched_clock() function may wrap only on unsigned long long boundaries, > +i.e. after 64 bits. Since this is a nanosecond value this will mean it wraps > +after circa 585 years. (For most practical systems this means "never".) Currently true, John Stultz was going to look into ammending this by teaching the kernel/sched_clock.c bits about early wraps (and a way for architectures to specify this) #define SCHED_CLOCK_WRAP_BITS 48 ... #ifdef SCHED_CLOCK_WRAP_BITS /* handle short wraps */ #endif foo for wrap_min/wrap_max and "delta = now - scd->tick_raw" like things might work. > +If an architecture does not provide its own implementation of this function, > +it will fall back to using jiffies, making its maximum resolution 1/HZ of the > +jiffy frequency for the architecture. This will affect scheduling accuracy > +and will likely show up in system benchmarks. sched_clock() need not be synchronized between CPUs, nor even be monotonic, we prefer a fast high res clock over a slow one, CONFIG_HAVE_UNSTABLE_SCHED_CLOCK provides infrastructure to sanitize the output of sched_clock(). [ of course we prefer a fast and synchronized clock, but we take fast over synchronized ] sched_clock() requires local IRQs to be disabled. Therefore, sched_clock() shall not be used, see kernel/sched_clock.c for detail and alternative interfaces. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/