Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757656Ab0KPTkJ (ORCPT ); Tue, 16 Nov 2010 14:40:09 -0500 Received: from na3sys009aog102.obsmtp.com ([74.125.149.69]:42922 "HELO na3sys009aog102.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1756309Ab0KPTjn (ORCPT ); Tue, 16 Nov 2010 14:39:43 -0500 From: Ben Gardiner To: Kevin Hilman , davinci-linux-open-source@linux.davincidsp.com, linux-input@vger.kernel.org, Dmitry Torokhov Cc: linux-kernel@vger.kernel.org, Chris Cordahi , Paul Mundt , Alexander Clouter , "Govindarajan, Sriramakrishnan" Subject: [PATCH v2 2/4] da850-evm: add UI Expander pushbuttons Date: Tue, 16 Nov 2010 14:39:35 -0500 Message-Id: <95f48a32a0256ecdb7148aa08d16f64928a7e5d8.1289935504.git.bengardiner@nanometrics.ca> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6194 Lines: 186 This patch adds EV_KEYs for each of the 8 pushbuttons on the UI board via a gpio-key device. The expander is a tca6416; it controls the SEL_{A,B,C} lines which enable and disable the peripherals found on the UI board in addition to the 8 pushbuttons mentioned above. The reason the existing tca6416-keypad driver is not employed is because there was no aparent way to keep the gpio lines used as SEL_{A,B,C} registered while simultaneously registering the pushbuttons as a tca6416-keypad instance. Some experimentation with the polling interval was performed; we were searching for the largest polling interval that did not affect the feel of the responsiveness of the buttons. It is very subjective but 200ms seems to be a good value that accepts firm pushes but rejects very light ones. The key values assigned to the buttons were arbitrarily chosen to be F1-F8. Signed-off-by: Ben Gardiner Reviewed-by: Chris Cordahi CC: Govindarajan, Sriramakrishnan --- Changes since v1: * set INPUT_POLLDEV default for DA850_EVM machine, but don't select it unconditionally * adding note to description about why tca6416-keypad was not used * adding Govindarajan, Sriramakrishnan, the author of the tca6416-keypad driver --- arch/arm/mach-davinci/Kconfig | 3 + arch/arm/mach-davinci/board-da850-evm.c | 76 +++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index b77b860..5163a1c 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -178,6 +178,9 @@ config DA850_UI_RMII endchoice +config INPUT_POLLDEV + default MACH_DAVINCI_DA850_EVM + config MACH_TNETV107X bool "TI TNETV107X Reference Platform" default ARCH_DAVINCI_TNETV107X diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c6e11c6..ff71ffd 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -17,8 +17,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -272,6 +274,63 @@ static inline void da850_evm_setup_emac_rmii(int rmii_sel) static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } #endif + +#define DA850_PB_DEBOUNCE_MS 10 +/* + * At 200ms polling interval it is possible to miss an + * event by tapping very lightly on the push button but most + * pushes do result in an event; longer intervals require the + * user to hold the button whereas shorter intervals require + * more CPU time for polling. + */ +#define DA850_PB_POLL_MS 200 +/* No need to poll switches anywhere near as fast */ +#define DA850_SW_POLL_MS 700 + +static const char const *ui_expander_names[] = { + "dgnd", "dgnd", "dgnd", "dgnd", "nc", "sel_c", "sel_b", "sel_a", "pb8", + "pb7", "pb6", "pb5", "pb4", "pb3", "pb2", "pb1" +}; + +#define DA850_UI_PB8_OFFSET 8 +#define DA850_N_UI_PB 8 + +static struct gpio_keys_button user_ui_pbs_gpio_keys[DA850_N_UI_PB]; + +static struct gpio_keys_platform_data user_ui_pbs_gpio_key_platform_data = { + .buttons = user_ui_pbs_gpio_keys, + .nbuttons = ARRAY_SIZE(user_ui_pbs_gpio_keys), + .rep = 0, /* disable auto-repeat */ + .poll_interval = DA850_PB_POLL_MS, +}; + +static struct platform_device user_ui_pb_gpio_key_device = { + .name = "gpio-keys", + .id = 0, + .dev = { + .platform_data = &user_ui_pbs_gpio_key_platform_data + } +}; + +static void da850_ui_pushbuttons_init(unsigned gpio) +{ + int i; + struct gpio_keys_button *button; + + for (i = 0; i < DA850_N_UI_PB; i++) { + button = &user_ui_pbs_gpio_keys[i]; + + button->code = KEY_F8 - i; + button->type = EV_KEY; + button->active_low = 1; + button->wakeup = 0; + button->debounce_interval = DA850_PB_DEBOUNCE_MS; + button->desc = (char *) + ui_expander_names[DA850_UI_PB8_OFFSET + i]; + button->gpio = gpio + DA850_UI_PB8_OFFSET + i; + } +} + static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) { @@ -304,6 +363,14 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, gpio_direction_output(sel_b, 1); gpio_direction_output(sel_c, 1); + da850_ui_pushbuttons_init(gpio); + ret = platform_device_register(&user_ui_pb_gpio_key_device); + if (ret) { + pr_warning("Could not register UI GPIO expander push-buttons" + " device\n"); + goto exp_setup_keys_fail; + } + ui_card_detected = 1; pr_info("DA850/OMAP-L138 EVM UI card detected\n"); @@ -313,6 +380,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, return 0; +exp_setup_keys_fail: + gpio_free(sel_c); exp_setup_selc_fail: gpio_free(sel_b); exp_setup_selb_fail: @@ -324,6 +393,8 @@ exp_setup_sela_fail: static int da850_evm_ui_expander_teardown(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) { + platform_device_unregister(&user_ui_pb_gpio_key_device); + /* deselect all functionalities */ gpio_set_value(gpio + 5, 1); gpio_set_value(gpio + 6, 1); @@ -340,6 +411,7 @@ static struct pca953x_platform_data da850_evm_ui_expander_info = { .gpio_base = DAVINCI_N_GPIO, .setup = da850_evm_ui_expander_setup, .teardown = da850_evm_ui_expander_teardown, + .names = ui_expander_names, }; static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { @@ -349,6 +421,10 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { { I2C_BOARD_INFO("tca6416", 0x20), .platform_data = &da850_evm_ui_expander_info, + /* + * TODO : populate at runtime using + * .irq = gpio_to_irq(GPIO_TO_PIN(2,7)), + */ }, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/