Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 11 Jun 2002 17:40:32 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 11 Jun 2002 17:40:31 -0400 Received: from 205-158-62-105.outblaze.com ([205.158.62.105]:27284 "HELO ws4-4.us4.outblaze.com") by vger.kernel.org with SMTP id ; Tue, 11 Jun 2002 17:40:30 -0400 Message-ID: <20020611214026.28765.qmail@linuxmail.org> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) From: "Paolo Ciarrocchi" To: linux-kernel@vger.kernel.org Date: Wed, 12 Jun 2002 05:40:26 +0800 Subject: [2.4.18] hdc: command error X-Originating-Ip: 193.76.202.244 X-Originating-Server: ws4-4.us4.outblaze.com Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi all, this is my dmesg output: Linux version 2.4.18 (root@penguin.work) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Fri May 17 19:43:07 BST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data) BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=2418 ro root=306 devfs=mount Initializing CPU#0 Detected 647.193 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1291.05 BogoMIPS Memory: 255620k/262080k available (1223k kernel code, 6072k reserved, 324k data, 204k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd980, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 10 for device 00:0a.0 PCI: Sharing IRQ 10 with 00:0b.0 PCI: Sharing IRQ 10 with 00:0b.1 PCI: Found IRQ 10 for device 00:0a.1 PCI: Sharing IRQ 10 with 01:00.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded NTFS driver v1.1.22 [Flags: R/W] ACPI: APM is already active, exiting parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c20-0x1c27, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c28-0x1c2f, BIOS settings: hdc:pio, hdd:pio hda: IC25N020ATDA04-0, ATA DISK drive hdc: TOSHIBA CD/DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39070080 sectors (20004 MB) w/1806KiB Cache, CHS=2584/240/63, UDMA(33) hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 es1371: version v0.30 time 19:45:41 May 17 2002 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 10 for device 00:0a.0 PCI: Sharing IRQ 10 with 00:0b.0 PCI: Sharing IRQ 10 with 00:0b.1 PCI: Found IRQ 10 for device 00:0a.1 PCI: Sharing IRQ 10 with 01:00.0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 0898, PCI irq10 Socket status: 30000006 Yenta IRQ list 0898, PCI irq10 Socket status: 30000006 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 204k freed Adding Swap: 264560k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal VFS: Disk change detected on device ide1(22,0) hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only PCI: Found IRQ 10 for device 00:0b.0 PCI: Sharing IRQ 10 with 00:0a.0 PCI: Sharing IRQ 10 with 00:0b.1 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0b.0: 3Com PCI 3c556 Laptop Tornado at 0x1000. Vers LK1.1.16 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x398-0x39f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. maestro3: version 1.22 built at 19:51:46 May 17 2002 PCI: Found IRQ 5 for device 00:0d.0 maestro3: Configuring ESS Maestro3(i) found at IO 0x1800 IRQ 5 maestro3: subvendor id: 0x0010103c ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 0 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev 16:00 (hdc), sector 4 What do these error mean? Some time I got this error running make install or rebooti. The machine is work with _no_ problem. Let me know if you need further information and, please cc' me 'cause I'm not a subscriber of the list. Thanks and regards, -- PC -- Get your free email from www.linuxmail.org Powered by Outblaze - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/