Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754575Ab0LDG5l (ORCPT ); Sat, 4 Dec 2010 01:57:41 -0500 Received: from tomasu.net ([64.85.170.234]:39710 "EHLO mail.tomasu.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753659Ab0LDG5j (ORCPT ); Sat, 4 Dec 2010 01:57:39 -0500 From: Thomas Fjellstrom Reply-To: thomas@fjellstrom.ca To: David Milburn Subject: Re: mvsas errors in 2.6.36 Date: Fri, 3 Dec 2010 23:57:18 -0700 User-Agent: KMail/1.13.5 (Linux/2.6.36.1+; KDE/4.5.2; x86_64; svn-1188918; 2010-10-21) Cc: Andre Tomt , Linux Kernel List , linux-scsi@vger.kernel.org References: <201010290650.32892.thomas@fjellstrom.ca> <201012030939.44858.thomas@fjellstrom.ca> <4CF95394.7010400@redhat.com> In-Reply-To: <4CF95394.7010400@redhat.com> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201012032357.18970.thomas@fjellstrom.ca> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12174 Lines: 240 On December 3, 2010, David Milburn wrote: > Thomas Fjellstrom wrote: > > On December 2, 2010, Thomas Fjellstrom wrote: > >> On December 1, 2010, Thomas Fjellstrom wrote: > >>> On November 17, 2010, you wrote: > >>>> On 11/17/2010 08:53 AM, Thomas Fjellstrom wrote: > >>>> [snip] > >>>> > >>>>> Still no fatal errors, but the problem is still happening regularly. > >>>>> It causes a pause in disk io of a couple seconds at least. Really > >>>>> quite annoying. > >>>>> > >>>>> One thing thats got me wondering, is could this be a power issue? > >>>>> It almost seems like (from the messages) that a single drive (any > >>>>> drive) is freaking out, and returning an error that probably > >>>>> shouldn't happen (no CHS 0?), which could mean the drive is > >>>>> underpowered and the firmware is flipping out. I'm not entirely > >>>>> sure. The system has a 750w decent quality Antec power supply. The > >>>>> total power use of the system shouldn't come over half that (phenom > >>>>> II x4 810 cpu, gigabyte ma790fxtud5p mb, low profile nvidia 9400GS > >>>>> gpu, 8 sata hdds, 3 fans, etc). I'm mostly sure the 12v rails are > >>>>> spread out evenly, but I have yet to make absolutely sure. > >>> > >>> Made absolute sure. I had been worrying that I was overloading one of > >>> the rails on the PSU, but it turns out that it isn't a multi 12v rail > >>> PSU after all. The box and advertising says it is, but the electronics > >>> inside all say its a single 12v rail device. > >>> > >>>> [snip] > >>>> > >>>> After the mvsas update in 2.6.35 this started happening to me as well; > >>>> at least its better than the previous state - not working.. ;-) > >>>> However, after rolling a new 2.6.35 with the following fix that is > >>>> queued up for the upcoming 2.6.35 and 2.6.36 stable releases, they > >>>> seem to have dissapeared - 3 days and counting. > >>>> > >>>> http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=bl > >>>> o b_ pl > >>>> ain;f=queue-2.6.33/libsas-fix-ncq-mixing-with-non-ncq.patch;h=b6d7c920 > >>>> 9 4 d95 ad67a3b23c2e09c25d4fbd0f46b;hb=HEAD > >>>> > >>>> The fix is queued up for the next 2.6.36 and 2.6.35 stable > >>>> point-releases. > >>> > >>> Ahah. I wonder how I missed that when I first read it. I'll have to > >>> give the stable .36 kernel a try. Thanks! > >> > >> No fix so far: > >> > >> [ 2539.040104] drivers/scsi/mvsas/mv_sas.c 1703:<7>mv_abort_task() > >> mvi=ffff880222f00000 task=ffff88018b3e2980 slot=ffff880222f265d0 > >> slot_idx=x2 [ 2539.040118] drivers/scsi/mvsas/mv_sas.c > >> 1632:mvs_query_task:rc= 5 [ 2539.040154] drivers/scsi/mvsas/mv_sas.c > >> 2083:port 7 ctrl sts=0x89800. [ 2539.040163] drivers/scsi/mvsas/mv_sas.c > >> 2085:Port 7 irq sts = 0x1001001 [ 2539.040176] > >> drivers/scsi/mvsas/mv_sas.c 2111:phy7 Unplug Notice [ 2539.050220] > >> drivers/scsi/mvsas/mv_sas.c > > The controller is reporting a phy ready state change, which is why you see > the unplug notice. > > Can you enable SCSI_SAS_LIBSAS_DEBUG and see if libsas reports anything > before the abort? > > You should be able to turn on in your kernel config: > > Device Drivers > SCSI device support > SCSI Transports > Compile the SAS Domain Transport Attributes in debug mode Hi, I've done as you requested. here's all of the output from the first (and currently only) event: [ 1428.000080] sas: command 0xffff880184ed1680, task 0xffff88017a0f2680, timed out: BLK_EH_NOT_HANDLED [ 1428.080051] sas: command 0xffff880224e03880, task 0xffff88017a0f24c0, timed out: BLK_EH_NOT_HANDLED [ 1428.080077] sas: Enter sas_scsi_recover_host [ 1428.080085] sas: trying to find task 0xffff88017a0f2680 [ 1428.080092] sas: sas_scsi_find_task: aborting task 0xffff88017a0f2680 [ 1428.080102] drivers/scsi/mvsas/mv_sas.c 1703:<7>mv_abort_task() mvi=ffff880224040000 task=ffff88017a0f2680 slot=ffff880224066680 slot_idx=x4 [ 1428.080113] sas: sas_scsi_find_task: querying task 0xffff88017a0f2680 [ 1428.080119] drivers/scsi/mvsas/mv_sas.c 1632:mvs_query_task:rc= 5 [ 1428.080125] sas: sas_scsi_find_task: task 0xffff88017a0f2680 failed to abort [ 1428.080130] sas: task 0xffff88017a0f2680 is not at LU: I_T recover [ 1428.080135] sas: I_T nexus reset for dev 0000000000000000 [ 1428.080172] drivers/scsi/mvsas/mv_sas.c 2083:port 0 ctrl sts=0x89800. [ 1428.080180] drivers/scsi/mvsas/mv_sas.c 2085:Port 0 irq sts = 0x1001 [ 1428.080193] drivers/scsi/mvsas/mv_sas.c 2111:phy0 Unplug Notice [ 1428.090228] drivers/scsi/mvsas/mv_sas.c 2083:port 0 ctrl sts=0x199800. [ 1428.090236] drivers/scsi/mvsas/mv_sas.c 2085:Port 0 irq sts = 0x1081 [ 1428.111954] drivers/scsi/mvsas/mv_sas.c 2083:port 0 ctrl sts=0x199800. [ 1428.111962] drivers/scsi/mvsas/mv_sas.c 2085:Port 0 irq sts = 0x10000 [ 1428.111969] drivers/scsi/mvsas/mv_sas.c 2138:notify plug in on phy[0] [ 1428.146351] drivers/scsi/mvsas/mv_sas.c 1224:port 0 attach dev info is 20004 [ 1428.146351] drivers/scsi/mvsas/mv_sas.c 1226:port 0 attach sas addr is 0 [ 1428.222044] drivers/scsi/mvsas/mv_sas.c 378:phy 0 byte dmaded. [ 1428.222109] sas: sas_form_port: phy0 belongs to port0 already(1)! [ 1430.300028] drivers/scsi/mvsas/mv_sas.c 1586:mvs_I_T_nexus_reset for device[0]:rc= 0 [ 1430.300040] sas: I_T 0000000000000000 recovered [ 1430.300048] sas: sas_ata_task_done: SAS error 8d [ 1430.300059] ata9: translated ATA stat/err 0x01/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [ 1430.300883] ata9.00: device reported invalid CHS sector 0 [ 1430.300888] ata9: status=0x01 { Error } [ 1430.300894] ata9: error=0x04 { DriveStatusError } [ 1430.300950] sas: trying to find task 0xffff88017a0f24c0 [ 1430.300956] sas: sas_scsi_find_task: aborting task 0xffff88017a0f24c0 [ 1430.300963] sas: sas_scsi_find_task: task 0xffff88017a0f24c0 is done [ 1430.300968] sas: sas_eh_handle_sas_errors: task 0xffff88017a0f24c0 is done [ 1430.300974] sas: sas_ata_task_done: SAS error 8d [ 1430.300982] ata12: translated ATA stat/err 0x01/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [ 1430.301777] ata12.00: device reported invalid CHS sector 0 [ 1430.301782] ata12: status=0x01 { Error } [ 1430.301788] ata12: error=0x04 { DriveStatusError } [ 1430.301808] sas: --- Exit sas_scsi_recover_host Thanks. > Thanks, > David > > >> 2083:port 7 ctrl sts=0x199800. [ 2539.050229] > >> drivers/scsi/mvsas/mv_sas.c 2085:Port 7 irq sts = 0x1001081 [ > >> 2539.071157] drivers/scsi/mvsas/mv_sas.c 2083:port 7 ctrl sts=0x199800. > >> [ 2539.071165] drivers/scsi/mvsas/mv_sas.c 2085:Port 7 irq sts = > >> 0x10000 [ 2539.071173] drivers/scsi/mvsas/mv_sas.c 2138:notify plug in > >> on phy[7] [ 2539.081142] drivers/scsi/mvsas/mv_sas.c 1224:port 7 attach > >> dev info is 5000002 [ 2539.081142] > >> drivers/scsi/mvsas/mv_sas.c 1226:port 7 attach sas addr is 7 [ > >> 2539.081142] drivers/scsi/mvsas/mv_sas.c 378:phy 7 byte dmaded. > >> [ 2541.270047] drivers/scsi/mvsas/mv_sas.c 1586:mvs_I_T_nexus_reset for > >> device[5]:rc= 0 [ 2541.270066] ata14: translated ATA stat/err 0x01/04 to > >> SCSI SK/ASC/ASCQ 0xb/00/00 [ 2541.270926] ata14: status=0x01 { Error } > >> [ 2541.271747] ata14: error=0x04 { DriveStatusError } > >> > >> That appeared after about 42 minutes of uptime. > > > > So after about 32 hours of uptime theres been 36 separate events. Each > > spits out similar messages as above, and each comes with a noticeable > > pause while the drive is reset. > > > > There are a number of possible reasons that I'm still having issues: > > - I managed to mess up the git checkout > > - My problem isn't related to the fix > > - The fix doesn't cover all cases of the problem it meant to fix > > > > I'm not certain which of them it is, I'd be more inclined to think I > > messed up the checkout, as I did patch something in, but the patches > > were completely unrelated and shouldn't have affected the scsi or ata > > systems at all. At this point I'm just grasping at straws. > > > > In case my card is somehow different than expected, I'll paste the lspci > > info for it: (AOC-SASLP-MV8) > > > > 04:00.0 SCSI storage controller: Marvell Technology Group Ltd. > > MV64460/64461/64462 System Controller, Revision B (rev 01) > > > > Subsystem: Super Micro Computer Inc Device 0500 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > > ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- > > UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >SERR- > Interrupt: pin A routed to IRQ 19 > > Region 2: I/O ports at df00 [size=128] > > Region 4: Memory at fdef0000 (64-bit, non-prefetchable) > > [size=64K] [virtual] Expansion ROM at fdd00000 [disabled] > > [size=256K] Capabilities: [48] Power Management version 2 > > > > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > > PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- > > PME-Enable- DSel=0 DScale=1 PME- > > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > > > > Address: 0000000000000000 Data: 0000 > > > > Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > > unlimited, L1 unlimited > > > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > > > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > > Unsupported- > > > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 2048 bytes > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > > TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, > > ASPM L0s, Latency L0 <256ns, L1 unlimited > > > > ClockPM- Surprise- LLActRep- BwNot- > > > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > > CommClk+ > > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ > > DLActive- BWMgmt- ABWMgmt- > > > > Capabilities: [100 v1] Advanced Error Reporting > > > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: > > DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ > > SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > > MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- > > BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- > > BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: > > First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > > > > Kernel driver in use: mvsas > > > > Its installed in a Phenom II X4 810 based system with a 790FX/SB750 > > chipset, 8G DDR3 1333 RAM, 6 1TB Seagate 7200.12 SATAII drives connected > > to the card via sas->sata breakout cables, and a couple 4 drive SATA > > hotswap bays. There are also two Seagate 7200.12 500G drives hooked up > > to the motherboard SATA controller. The system is powered via an Antec > > Neopower Blue 650W PSU which is probably only half loaded. System also > > has a discreet gfx card, but its a low end, low profile, fanless card > > that takes up next to no power. > > > > I'm still willing to help test any fixes for the mvsas driver on this > > card. > > > > Thank you. -- Thomas Fjellstrom thomas@fjellstrom.ca -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/