Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755706Ab0LIM2E (ORCPT ); Thu, 9 Dec 2010 07:28:04 -0500 Received: from mga01.intel.com ([192.55.52.88]:52128 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755523Ab0LIM2B (ORCPT ); Thu, 9 Dec 2010 07:28:01 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.59,319,1288594800"; d="scan'208";a="866315823" Date: Thu, 9 Dec 2010 20:24:26 +0800 From: Chuanxiao Dong To: linux-mmc@vger.kernel.org Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org, cjb@laptop.org, kmpark@infradead.org, leonard.mai@intel.com Subject: [PATCH v5 1/4]enable HW reset cap for supported eMMC card Message-ID: <20101209122426.GB13236@intel.com> Reply-To: Chuanxiao Dong MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.19 (2009-01-05) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2937 Lines: 92 HW reset capability enable bit is byte 162 in card EXT_CSD register, only version4.4 card or later can support to enable this feature. HW reset feature can be used to reset eMMC card when occurs timeout error during read/write/erase even eMMC card cannot correspond any command Signed-off-by: Chuanxiao Dong --- drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++ include/linux/mmc/card.h | 1 + include/linux/mmc/mmc.h | 1 + 3 files changed, 31 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 76bb621..1d138b3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -310,6 +310,10 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; card->ext_csd.trim_timeout = 300 * ext_csd[EXT_CSD_TRIM_MULT]; + /* + * check Hardware reset cap + */ + card->ext_csd.rst = ext_csd[EXT_CSD_RST]; } if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) @@ -484,6 +488,31 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * eMMC4.4 version card has HW reset capability. + * Enable this feature here: + * RST_N_FUNCTION register is W/R, one time programmable + * or readable. + * So need to enable this register only once after power on + */ + if (card->csd.mmca_vsn >= CSD_SPEC_VER_4 && + card->ext_csd.rev >= 5 && + card->ext_csd.rst == 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_RST, 1); + + if (err && err != -EBADMSG) + goto free_card; + + if (err) { + printk(KERN_WARNING "%s: switch to rst enable " + "failed %d\n", + mmc_hostname(card->host), err); + err = 0; + } else + card->ext_csd.rst = 1; + } + + /* * Activate high speed (if supported) */ if ((card->ext_csd.hs_max_dtr != 0) && diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 8ce0827..ebee676 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -54,6 +54,7 @@ struct mmc_ext_csd { unsigned int sec_trim_mult; /* Secure trim multiplier */ unsigned int sec_erase_mult; /* Secure erase multiplier */ unsigned int trim_timeout; /* In milliseconds */ + unsigned int rst; /* hardware reset enable bit */ }; struct sd_scr { diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 956fbd8..b7ab0da 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -251,6 +251,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_RST 162 /* onetime programmable R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ -- 1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/