Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 4 Jul 2002 04:58:21 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 4 Jul 2002 04:58:20 -0400 Received: from mail.vtc.edu.hk ([202.75.80.229]:16693 "EHLO pandora.vtc.edu.hk") by vger.kernel.org with ESMTP id ; Thu, 4 Jul 2002 04:58:17 -0400 Message-ID: <3D240EB9.33B93BFA@vtc.edu.hk> Date: Thu, 04 Jul 2002 17:00:42 +0800 From: Nick Urbanik Organization: Institute of Vocational Education (Tsing Yi) X-Mailer: Mozilla 4.79 [en] (X11; U; Linux 2.4.18-5 i686) X-Accept-Language: en MIME-Version: 1.0 CC: Linux Kernel list Subject: Re: cmd649 not working with 2 CPU box References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: unlisted-recipients:; (no To-header on input) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3156 Lines: 77 Dear Folks, Andre Hedrick wrote: > On Fri, 15 Feb 2002, Nick Urbanik wrote: > > > Dear folks, > > > > I have tried cmd649 ATA pci cards; they work great with single CPU > > kernels, not at all with SMP kernels. The SMP kernel just does not make > > an entry in /proc/ide. Some details are in my post on 13 Feb, with > > subject: cmd649 ok 1 cpu, 2 cpus, not working. I would appreciate any > > pointers that may lead to getting them working. [snip] > LOL, I had the same question asked to me by CMD and probed to them it > works. Obviously you have not configured something correct :-/ I'm sorry to be so thick, but I do not understand why the CMD-649 card is not getting an interrupt with a 2-CPU kernel, but gets one with a single CPU kernel. I have spent some time on trying to get it to work. I would appreciate any pointers that anyone can offer. I will send any information that my be helpful. We have had this problem for more than a year. I have lost sleep over it! I have included excerpts from dmesg, and some files from /proc in an earlier post, but perhaps did not include sufficient info. Here is part of it again: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0x98c0-0x98c7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x98c8-0x98cf, BIOS settings: hdc:DMA, hdd:DMA CMD649: IDE controller on PCI bus 00 dev 40 CMD649: chipset revision 2 CMD649: not 100% native mode: will probe irqs later CMD649: ROM enabled at 0x82100000 ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:pio, hdh:pio hda: ATAPI CD-ROM DRIVE 50X MAXIMUM, ATAPI CD/DVD-ROM drive hdc: ST360021A, ATA DISK drive hde: ST320420A, ATA DISK drive hde: IRQ probe failed (0xfffffef8) hdf: IRQ probe failed (0xfffffef8) hdf: IRQ probe failed (0xfffffef8) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2: DISABLED, NO IRQ ^^^^^^^^^^^^^^^^^^^^^^____________Oh dear!!!! > Andre Hedrick > Linux Disk Certification Project Linux ATA Development If you can point me to any source of information about these interrupts on SMP systems, and how they are (or are not) allocated, I would be grateful. -- Nick Urbanik RHCE nicku@vtc.edu.hk Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi) Tel: (852) 2436 8576, (852) 2436 8579 Fax: (852) 2436 8526 PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/