Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756969Ab1BANsq (ORCPT ); Tue, 1 Feb 2011 08:48:46 -0500 Received: from wolverine02.qualcomm.com ([199.106.114.251]:47235 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756950Ab1BANsn (ORCPT ); Tue, 1 Feb 2011 08:48:43 -0500 X-IronPort-AV: E=McAfee;i="5400,1158,6243"; a="72570763" From: Anirudh Ghayal To: linux-kernel@vger.kernel.org Cc: linux-input@vger.kernel.org, rtc-linux@googlegroups.com, linux-arm-msm@vger.kernel.org, Anirudh Ghayal , Shubhrajyoti Datta , Dmitry Torokhov Subject: [RFC v2 PATCH 5/7] input: pmic8058-othc: Add support for PM8058 based OTHC Date: Tue, 1 Feb 2011 19:17:41 +0530 Message-Id: <1296568063-12010-6-git-send-email-aghayal@codeaurora.org> X-Mailer: git-send-email 1.7.3.5 In-Reply-To: <1296568063-12010-1-git-send-email-aghayal@codeaurora.org> References: <1296568063-12010-1-git-send-email-aghayal@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20874 Lines: 722 One-touch headset controller is a hardware module in Qualcomm's PMIC8058. It supports headset insert/remove and switch press/release detection events over 3 MIC BIAS lines. The MIC BIAS lines can be configured to support headset detection or act as regular BIAS lines. Cc: Shubhrajyoti Datta Cc: Dmitry Torokhov Signed-off-by: Anirudh Ghayal --- Addressed review comments from Dimitry. removed IRQF_ONESHOT, const pdata. drivers/input/misc/Kconfig | 9 + drivers/input/misc/Makefile | 1 + drivers/input/misc/pmic8058-othc.c | 535 +++++++++++++++++++++++++++++++++++ include/linux/input/pmic8058-othc.h | 117 ++++++++ 4 files changed, 662 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/pmic8058-othc.c create mode 100644 include/linux/input/pmic8058-othc.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index d70a7be..3802f54 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -465,4 +465,13 @@ config INPUT_CMA3000_I2C To compile this driver as a module, choose M here: the module will be called cma3000_d0x_i2c. +config INPUT_PMIC8058_OTHC + tristate "Qualcomm PMIC8058 OTHC support" + depends on PMIC8058 + help + Say Y here if you want support PMIC8058 One-touch Headset Controller + (OTHC) + + To compile this driver as a module, choose M here: the + module will be called pmic8058-othc. endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0348704..df9a679 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_PMIC8058_OTHC) += pmic8058-othc.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_PMIC8058_PWRKEY) += pmic8058-pwrkey.o diff --git a/drivers/input/misc/pmic8058-othc.c b/drivers/input/misc/pmic8058-othc.c new file mode 100644 index 0000000..83fd8a1 --- /dev/null +++ b/drivers/input/misc/pmic8058-othc.c @@ -0,0 +1,535 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#define pr_fmt(fmt) "%s:" fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define PM8058_OTHC_LOW_CURR_MASK 0xF0 +#define PM8058_OTHC_HIGH_CURR_MASK 0x0F +#define PM8058_OTHC_EN_SIG_MASK 0x3F +#define PM8058_OTHC_HYST_PREDIV_MASK 0xC7 +#define PM8058_OTHC_CLK_PREDIV_MASK 0xF8 +#define PM8058_OTHC_HYST_CLK_MASK 0x0F +#define PM8058_OTHC_PERIOD_CLK_MASK 0xF0 + +#define PM8058_OTHC_LOW_CURR_SHIFT 0x4 +#define PM8058_OTHC_EN_SIG_SHIFT 0x6 +#define PM8058_OTHC_HYST_PREDIV_SHIFT 0x3 +#define PM8058_OTHC_HYST_CLK_SHIFT 0x4 + +#define PM8058_OTHC_LOW_CURR_MIRROR 10 +#define PM8058_OTHC_HIGH_CURR_MIRROR 100 +#define PM8058_OTHC_CLK_SRC_SHIFT 10 + +/** + * struct pm8058_othc - othc driver data structure + * @othc_ipd: input device for othc + * @othc_pdata: a pointer to the platform data + * @othc_base: base address of the OTHC controller + * @othc_irq_sw: switch detect irq number + * @othc_irq_ir: headset jack detect irq number + * @othc_sw_state: current state of the switch + * @othc_ir_state: current state of the headset + * @switch_reject: indicates if valid switch press + * @switch_debounce_ms: the debounce time for the switch + * @lock: spin lock variable + * @timer: timer for switch debounce time + * @pm_chip: pointer to the pm8058 parent chip + */ +struct pm8058_othc { + struct input_dev *othc_ipd; + const struct pmic8058_othc_config_pdata *othc_pdata; + int othc_base; + int othc_irq_sw; + int othc_irq_ir; + bool othc_sw_state; + bool othc_ir_state; + bool switch_reject; + unsigned long switch_debounce_ms; + spinlock_t lock; + struct timer_list timer; + struct pm8058_chip *pm_chip; +}; + +static struct pm8058_othc *config[OTHC_MICBIAS_MAX]; + +/** + * pm8058_micbias_enable() - Enables/Disables the MIC_BIAS + * @micbias: MIC BIAS line which needs to be enabled + * @enable: operational state for the MIC BIAS line + * + * The API pm8058_micbias_enable() configures the MIC_BIAS. Only the lines + * which are not used for headset detection can be configured using this API. + * The API returns an error code if it fails to configure, else it returns 0. + */ +int pm8058_micbias_enable(enum othc_micbias micbias, + enum othc_micbias_enable enable) +{ + int rc; + u8 reg; + struct pm8058_othc *dd = config[micbias]; + + if (dd == NULL) { + pr_err("MIC_BIAS not registered, cannot enable\n"); + return -ENODEV; + } + + if (dd->othc_pdata->micbias_capability != OTHC_MICBIAS) { + pr_err("MIC_BIAS enable capability not supported\n"); + return -EINVAL; + } + + rc = pm8058_read(dd->pm_chip, dd->othc_base + 1, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + reg &= PM8058_OTHC_EN_SIG_MASK; + reg |= (enable << PM8058_OTHC_EN_SIG_SHIFT); + + rc = pm8058_write(dd->pm_chip, dd->othc_base + 1, ®, 1); + if (rc < 0) { + pr_err("PM8058 write failed\n"); + return rc; + } + + return rc; +} +EXPORT_SYMBOL_GPL(pm8058_micbias_enable); + +#ifdef CONFIG_PM +static int pm8058_othc_suspend(struct device *dev) +{ + struct pm8058_othc *dd = dev_get_drvdata(dev); + + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) { + if (device_may_wakeup(dev)) { + enable_irq_wake(dd->othc_irq_sw); + enable_irq_wake(dd->othc_irq_ir); + } + } + + return 0; +} + +static int pm8058_othc_resume(struct device *dev) +{ + struct pm8058_othc *dd = dev_get_drvdata(dev); + + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) { + if (device_may_wakeup(dev)) { + disable_irq_wake(dd->othc_irq_sw); + disable_irq_wake(dd->othc_irq_ir); + } + } + + return 0; +} + +static const struct dev_pm_ops pm8058_othc_pm_ops = { + .suspend = pm8058_othc_suspend, + .resume = pm8058_othc_resume, +}; +#endif + +static int __devexit pm8058_othc_remove(struct platform_device *pd) +{ + struct pm8058_othc *dd = platform_get_drvdata(pd); + + if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) { + device_init_wakeup(&pd->dev, 0); + free_irq(dd->othc_irq_sw, dd); + free_irq(dd->othc_irq_ir, dd); + del_timer_sync(&dd->timer); + input_unregister_device(dd->othc_ipd); + } + + kfree(dd); + + return 0; +} + +static void pm8058_othc_timer(unsigned long handle) +{ + unsigned long flags; + struct pm8058_othc *dd = (struct pm8058_othc *)handle; + + spin_lock_irqsave(&dd->lock, flags); + dd->switch_reject = false; + spin_unlock_irqrestore(&dd->lock, flags); +} + +static irqreturn_t pm8058_no_sw(int irq, void *dev_id) +{ + struct pm8058_othc *dd = dev_id; + unsigned long flags; + + /* + * Due to a hardware bug, spurious switch interrutps are seen while + * inserting the headset slowly. A timer based logic rejects these + * switch interrutps. + */ + spin_lock_irqsave(&dd->lock, flags); + if (dd->switch_reject == true) { + spin_unlock_irqrestore(&dd->lock, flags); + return IRQ_HANDLED; + } + spin_unlock_irqrestore(&dd->lock, flags); + + dd->othc_sw_state = !dd->othc_sw_state; + input_report_key(dd->othc_ipd, KEY_MEDIA, dd->othc_sw_state); + input_sync(dd->othc_ipd); + + return IRQ_HANDLED; +} + +static irqreturn_t pm8058_nc_ir(int irq, void *dev_id) +{ + unsigned long flags; + struct pm8058_othc *dd = dev_id; + + spin_lock_irqsave(&dd->lock, flags); + dd->switch_reject = true; + spin_unlock_irqrestore(&dd->lock, flags); + + mod_timer(&dd->timer, jiffies + + msecs_to_jiffies(dd->switch_debounce_ms)); + + dd->othc_ir_state = !dd->othc_ir_state; + input_report_key(dd->othc_ipd, SW_HEADPHONE_INSERT, dd->othc_ir_state); + input_sync(dd->othc_ipd); + + return IRQ_HANDLED; +} + +static int __devinit +pm8058_configure_othc(struct pm8058_othc *dd) +{ + int rc; + u8 reg, value; + u32 value1; + u16 base_addr = dd->othc_base; + const struct othc_hsed_config *hsed_config = + dd->othc_pdata->hsed_config; + + /* Control Register 1*/ + rc = pm8058_read(dd->pm_chip, base_addr, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + if (hsed_config->othc_headset == OTHC_HEADSET_NO) { + /* set iDAC high current threshold */ + value = (hsed_config->othc_highcurr_thresh_uA / + PM8058_OTHC_HIGH_CURR_MIRROR) - 2; + reg = (reg & PM8058_OTHC_HIGH_CURR_MASK) | value; + } else { + /* set iDAC low current threshold */ + value = (hsed_config->othc_lowcurr_thresh_uA / + PM8058_OTHC_LOW_CURR_MIRROR) - 1; + reg &= PM8058_OTHC_LOW_CURR_MASK; + reg |= (value << PM8058_OTHC_LOW_CURR_SHIFT); + } + + rc = pm8058_write(dd->pm_chip, base_addr, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + /* Control register 2*/ + rc = pm8058_read(dd->pm_chip, base_addr + 1, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + value = dd->othc_pdata->micbias_enable; + reg &= PM8058_OTHC_EN_SIG_MASK; + reg |= (value << PM8058_OTHC_EN_SIG_SHIFT); + + value = 0; + value1 = (hsed_config->othc_hyst_prediv_us << + PM8058_OTHC_CLK_SRC_SHIFT) / USEC_PER_SEC; + while (value1 != 0) { + value1 = value1 >> 1; + value++; + } + if (value > 7) { + pr_err("Invalid input argument - othc_hyst_prediv_us\n"); + return -EINVAL; + } + reg &= PM8058_OTHC_HYST_PREDIV_MASK; + reg |= (value << PM8058_OTHC_HYST_PREDIV_SHIFT); + + value = 0; + value1 = (hsed_config->othc_period_clkdiv_us << + PM8058_OTHC_CLK_SRC_SHIFT) / USEC_PER_SEC; + while (value1 != 1) { + value1 = value1 >> 1; + value++; + } + if (value > 8) { + pr_err("Invalid input argument - othc_period_clkdiv_us\n"); + return -EINVAL; + } + reg = (reg & PM8058_OTHC_CLK_PREDIV_MASK) | (value - 1); + + rc = pm8058_write(dd->pm_chip, base_addr + 1, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + /* Control register 3 */ + rc = pm8058_read(dd->pm_chip, base_addr + 2 , ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + value = hsed_config->othc_hyst_clk_us / + hsed_config->othc_hyst_prediv_us; + if (value > 15) { + pr_err("Invalid input argument - othc_hyst_prediv_us\n"); + return -EINVAL; + } + reg &= PM8058_OTHC_HYST_CLK_MASK; + reg |= value << PM8058_OTHC_HYST_CLK_SHIFT; + + value = hsed_config->othc_period_clk_us / + hsed_config->othc_period_clkdiv_us; + if (value > 15) { + pr_err("Invalid input argument - othc_hyst_prediv_us\n"); + return -EINVAL; + } + reg = (reg & PM8058_OTHC_PERIOD_CLK_MASK) | value; + + rc = pm8058_write(dd->pm_chip, base_addr + 2, ®, 1); + if (rc < 0) { + pr_err("PM8058 read failed\n"); + return rc; + } + + return 0; +} + +static int __devinit +pm8058_othc_configure_hsed(struct pm8058_othc *dd, struct platform_device *pd) +{ + int rc; + struct input_dev *ipd; + const struct pmic8058_othc_config_pdata *pdata = pd->dev.platform_data; + const struct othc_hsed_config *hsed_config = pdata->hsed_config; + + ipd = input_allocate_device(); + if (ipd == NULL) { + dev_err(&pd->dev, "Memory allocate to input device failed!\n"); + rc = -ENOMEM; + goto fail_input_alloc; + } + + dd->othc_irq_sw = platform_get_irq(pd, 0); + dd->othc_irq_ir = platform_get_irq(pd, 1); + if (dd->othc_irq_ir < 0 || dd->othc_irq_sw < 0) { + dev_err(&pd->dev, "othc resource:IRQ_IR absent!\n"); + rc = -ENXIO; + goto fail_othc_config; + } + + ipd->name = "pmic8058_othc"; + ipd->phys = "pmic8058_othc/input0"; + ipd->dev.parent = &pd->dev; + + input_set_capability(ipd, EV_SW, SW_HEADPHONE_INSERT); + input_set_capability(ipd, EV_KEY, KEY_MEDIA); + + input_set_drvdata(ipd, dd); + + dd->othc_ipd = ipd; + dd->othc_sw_state = false; + dd->othc_ir_state = false; + spin_lock_init(&dd->lock); + dd->switch_debounce_ms = hsed_config->switch_debounce_ms; + setup_timer(&dd->timer, pm8058_othc_timer, (unsigned long) dd); + + rc = pm8058_configure_othc(dd); + if (rc < 0) + goto fail_othc_config; + + rc = input_register_device(ipd); + if (rc) { + dev_err(&pd->dev, "Register OTHC device failed!\n"); + goto fail_othc_config; + } + + /* Check if the headset is already inserted during boot up */ + rc = pm8058_irq_get_rt_status(dd->pm_chip, dd->othc_irq_ir); + if (rc < 0) { + dev_err(&pd->dev, "Unable to get headset status at boot!\n"); + goto fail_ir_irq; + } + if (rc) { + dev_dbg(&pd->dev, "Headset inserted during boot up!\n"); + dd->othc_ir_state = true; + input_report_switch(dd->othc_ipd, SW_HEADPHONE_INSERT, 1); + input_sync(dd->othc_ipd); + } + + rc = request_any_context_irq(dd->othc_irq_ir, pm8058_nc_ir, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "pm8058_othc_ir", dd); + if (rc < 0) { + dev_err(&pd->dev, "Request pm8058_othc_ir IRQ failed!\n"); + goto fail_ir_irq; + } + + rc = request_any_context_irq(dd->othc_irq_sw, pm8058_no_sw, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "pm8058_othc_sw", dd); + if (rc < 0) { + dev_err(&pd->dev, "Request pm8058_othc_sw IRQ failed!\n"); + goto fail_sw_irq; + } + + device_init_wakeup(&pd->dev, hsed_config->othc_wakeup); + + return 0; + +fail_sw_irq: + free_irq(dd->othc_irq_ir, dd); +fail_ir_irq: + input_unregister_device(ipd); + dd->othc_ipd = NULL; +fail_othc_config: + input_free_device(ipd); +fail_input_alloc: + return rc; +} + +static int __devinit pm8058_othc_probe(struct platform_device *pd) +{ + int rc; + struct pm8058_othc *dd; + struct pm8058_chip *chip; + struct resource *res; + struct pmic8058_othc_config_pdata *pdata = pd->dev.platform_data; + + chip = platform_get_drvdata(pd); + if (chip == NULL) { + dev_err(&pd->dev, "Invalid driver information!\n"); + return -EINVAL; + } + + /* PMIC8058 version 1.0 not supported */ + if (pm8058_rev(chip) == PM_8058_REV_1p0) { + dev_err(&pd->dev, "PMIC8058 version not supported!\n"); + return -ENODEV; + } + + if (pdata == NULL) { + dev_err(&pd->dev, "Platform data not present!\n"); + return -EINVAL; + } + + dd = kzalloc(sizeof(*dd), GFP_KERNEL); + if (dd == NULL) { + dev_err(&pd->dev, "Unable to allocate memory!\n"); + return -ENOMEM; + } + + res = platform_get_resource_byname(pd, IORESOURCE_IO, "othc_base"); + if (res == NULL) { + dev_err(&pd->dev, "OTHC Base address, resource absent!\n"); + rc = -ENXIO; + goto fail_get_res; + } + + dd->othc_pdata = pdata; + dd->pm_chip = chip; + dd->othc_base = res->start; + + platform_set_drvdata(pd, dd); + + if (pdata->micbias_capability == OTHC_MICBIAS_HSED) { + /* HSED to be supported on this MICBIAS line */ + if (pdata->hsed_config != NULL) { + rc = pm8058_othc_configure_hsed(dd, pd); + if (rc < 0) + goto fail_get_res; + } else { + dev_err(&pd->dev, "HSED config data absent!\n"); + rc = -EINVAL; + goto fail_get_res; + } + } + + /* Store the local driver data structure */ + if (dd->othc_pdata->micbias_select < OTHC_MICBIAS_MAX) + config[dd->othc_pdata->micbias_select] = dd; + + dev_dbg(&pd->dev, "Device %s:%d successfully registered\n", + pd->name, pd->id); + return 0; + +fail_get_res: + kfree(dd); + return rc; +} + +static struct platform_driver pm8058_othc_driver = { + .driver = { + .name = "pm8058-othc", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &pm8058_othc_pm_ops, +#endif + }, + .probe = pm8058_othc_probe, + .remove = __devexit_p(pm8058_othc_remove), +}; + +static int __init pm8058_othc_init(void) +{ + return platform_driver_register(&pm8058_othc_driver); +} +module_init(pm8058_othc_init); + +static void __exit pm8058_othc_exit(void) +{ + platform_driver_unregister(&pm8058_othc_driver); +} +module_exit(pm8058_othc_exit); + +MODULE_ALIAS("platform:pmic8058_othc"); +MODULE_DESCRIPTION("PMIC8058 OTHC"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Anirudh Ghayal "); diff --git a/include/linux/input/pmic8058-othc.h b/include/linux/input/pmic8058-othc.h new file mode 100644 index 0000000..2d7ff79 --- /dev/null +++ b/include/linux/input/pmic8058-othc.h @@ -0,0 +1,117 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __PMIC8058_OTHC_H__ +#define __PMIC8058_OTHC_H__ + +/** + * enum othc_micbias_enable - MIC BIAS operational states + * + * This enum describes the different configurations of the BIAS line. + */ +enum othc_micbias_enable { + /* Turn off BIAS */ + OTHC_SIGNAL_OFF, + /* Turn on BIAS if TCXO_EN is high */ + OTHC_SIGNAL_TCXO, + /* Turn on BIAS if TCXO_EN or PWN is high */ + OTHC_SIGNAL_PWM_TCXO, + /* Turn on BIAS always */ + OTHC_SIGNAL_ALWAYS_ON, +}; + +/** + * enum othc_headset_type - Different type of supported headset + * + * This enum describes the different types of supported headsets. + */ +enum othc_headset_type { + OTHC_HEADSET_NO, + OTHC_HEADSET_NC, +}; + +/** + * enum othc_micbias - Lists the number of MIC BIAS lines. + * + * This enum lists all the total number of BIAS lines. + */ +enum othc_micbias { + OTHC_MICBIAS_0, + OTHC_MICBIAS_1, + OTHC_MICBIAS_2, + OTHC_MICBIAS_MAX, +}; + +/** + * enum othc_micbias_capability - Capability of the MIC BIAS line + * + * This enum describes the capability of the MIC BIAS line, it can either be + * used for headset or a regular speaker MIC BIAS. + */ +enum othc_micbias_capability { + OTHC_MICBIAS, + OTHC_MICBIAS_HSED, +}; + +/** + * struct othc_hsed_config - headset specific configuration structure + * @othc_headset: type of headset + * @othc_lowcurr_thresh_uA: low current threshold for the headset + * @othc_highcurr_thresh_uA: high current threshold for the headset + * @othc_hyst_prediv_us: hysterisis time pre-divider + * @othc_period_clkdiv_us: pwm period pre-divider + * @othc_hyst_clk_us: hysterisis clock period + * @othc_hyst_clk_us: hysterisis clock period + * @othc_period_clk_us: pwm clock period + * @othc_wakeup: wakeup capability + * @switch_debounce_ms: specifies the switch debounce time + * + * This structure provides the configurable parameters for headset. This is a + * part of the platform data. + */ +struct othc_hsed_config { + enum othc_headset_type othc_headset; + u16 othc_lowcurr_thresh_uA; + u16 othc_highcurr_thresh_uA; + u32 othc_hyst_prediv_us; + u32 othc_period_clkdiv_us; + u32 othc_hyst_clk_us; + u32 othc_period_clk_us; + int othc_wakeup; + unsigned long switch_debounce_ms; +}; + +/** + * struct pmic8058_othc_config_pdata - platform data for OTHC + * @micbias_select: selects the MIC BIAS + * @micbias_enable: default operational configuration of the MIC BIAS + * @micbias_capability: capability supported by the MIC BIAS + * @hsed_config: pointer to headset configuration + * + * This structure is the platform data provided to the OTHC driver + */ +struct pmic8058_othc_config_pdata { + enum othc_micbias micbias_select; + enum othc_micbias_enable micbias_enable; + enum othc_micbias_capability micbias_capability; + struct othc_hsed_config *hsed_config; +}; + +int pm8058_micbias_enable(enum othc_micbias micbias, + enum othc_micbias_enable enable); + +#endif /* __PMIC8058_OTHC_H__ */ -- 1.7.3.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/