Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756999Ab1BANs5 (ORCPT ); Tue, 1 Feb 2011 08:48:57 -0500 Received: from wolverine01.qualcomm.com ([199.106.114.254]:27646 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752430Ab1BANsz (ORCPT ); Tue, 1 Feb 2011 08:48:55 -0500 X-IronPort-AV: E=McAfee;i="5400,1158,6243"; a="72780283" From: Anirudh Ghayal To: linux-kernel@vger.kernel.org Cc: linux-input@vger.kernel.org, rtc-linux@googlegroups.com, linux-arm-msm@vger.kernel.org, Amy Maloche , Dmitry Torokhov , Mohan Pallaka Subject: [RFC v2 PATCH 7/7] input: misc: Add support for PM8058 based vibrator driver Date: Tue, 1 Feb 2011 19:17:43 +0530 Message-Id: <1296568063-12010-8-git-send-email-aghayal@codeaurora.org> X-Mailer: git-send-email 1.7.3.5 In-Reply-To: <1296568063-12010-1-git-send-email-aghayal@codeaurora.org> References: <1296568063-12010-1-git-send-email-aghayal@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10084 Lines: 368 From: Amy Maloche Add support for pmic8058 based vibrator to facilitate haptics. Cc: Dmitry Torokhov Signed-off-by: Mohan Pallaka --- drivers/input/misc/Kconfig | 12 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/pmic8058-vibrator.c | 306 ++++++++++++++++++++++++++++++++ 3 files changed, 319 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/pmic8058-vibrator.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 3802f54..e391f9e 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -74,6 +74,18 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PMIC8058_VIBRATOR + tristate "Qualcomm PM8058 vibrator support" + depends on PMIC8058 + select INPUT_FF_MEMLESS + help + This option enables device driver support for the vibrator + on Qualcomm PM8058 chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called pmic8058-vibrator. + config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index df9a679..b5fa9f6 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_PMIC8058_OTHC) += pmic8058-othc.o +obj-$(CONFIG_INPUT_PMIC8058_VIBRATOR) += pmic8058-vibrator.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_PMIC8058_PWRKEY) += pmic8058-pwrkey.o diff --git a/drivers/input/misc/pmic8058-vibrator.c b/drivers/input/misc/pmic8058-vibrator.c new file mode 100644 index 0000000..cb1a797 --- /dev/null +++ b/drivers/input/misc/pmic8058-vibrator.c @@ -0,0 +1,306 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define VIB_DRV 0x4A + +#define VIB_DRV_SEL_MASK 0xf8 +#define VIB_DRV_SEL_SHIFT 0x03 +#define VIB_DRV_EN_MANUAL_MASK 0xfc + +#define VIB_MAX_LEVEL_mV (3100) +#define VIB_MIN_LEVEL_mV (1200) +#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV) + +#define MAX_FF_SPEED 0xff + +/* + * struct pmic8058_vib - structure to hold vibrator data + * vib_input_dev: input device supporting force feedback + * work: work structure to set the vibration parameters + * dev: device supporting force feedback + * pdata: platform data + * pm_chip: reference to pmic chip to carry out read/write operations + * speed: speed of vibration set from userland + * state: state of vibrator + * level: level of vibration to set in the chip + * reg_vib_drv: VIB_DRV register value + * + */ +struct pmic8058_vib { + struct input_dev *vib_input_dev; + struct work_struct work; + struct device *dev; + const struct pmic8058_vibrator_pdata *pdata; + struct pm8058_chip *pm_chip; + int speed; + int state; + int level; + u8 reg_vib_drv; +}; + +/* + * pmic8058_vib_read_u8 - helper to read a byte from pmic chip + * vib: pointer to vibrator structure + * data: placeholder for data to be read + * reg: register address + * + */ +static int pmic8058_vib_read_u8(struct pmic8058_vib *vib, + u8 *data, u16 reg) +{ + int rc; + + rc = pm8058_read(vib->pm_chip, reg, data, 1); + if (rc < 0) + dev_warn(vib->dev, "Error reading pmic8058 reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/* + * pmic8058_vib_write_u8 - helper to write a byte to pmic chip + * vib: pointer to vibrator structure + * data: data to write + * reg: register address + * + */ +static int pmic8058_vib_write_u8(struct pmic8058_vib *vib, + u8 data, u16 reg) +{ + int rc; + + rc = pm8058_write(vib->pm_chip, reg, &data, 1); + if (rc < 0) + dev_warn(vib->dev, "Error writing pmic8058 reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/* + * pmic8058_vib_set - handler to start/stop vibration + * vib: pointer to vibrator structure + * on: state to set + * + */ +static int pmic8058_vib_set(struct pmic8058_vib *vib, int on) +{ + int rc; + u8 val; + + val = vib->reg_vib_drv; + + if (on) + val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK); + else + val &= ~VIB_DRV_SEL_MASK; + + rc = pmic8058_vib_write_u8(vib, val, VIB_DRV); + if (rc < 0) + return rc; + + vib->reg_vib_drv = val; + return rc; +} + +/* + * pmic8058_work_handler - worker to set vibration level + * work: pointer to work_struct + * + */ +static void pmic8058_work_handler(struct work_struct *work) +{ + struct pmic8058_vib *vib; + int rc; + u8 val; + + vib = container_of(work, struct pmic8058_vib, work); + + rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV); + if (rc < 0) + return; + + /* + * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so + * scale the level to fit into these ranges. + */ + if (vib->speed) { + vib->state = 1; + vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) + + VIB_MIN_LEVEL_mV; + vib->level /= 100; + } else { + vib->state = 0; + vib->level = VIB_MIN_LEVEL_mV / 100; + } + pmic8058_vib_set(vib, vib->state); +} + +/* + * pmic8058_vib_play_effect - function to handle vib effects. + * dev: input device pointer + * data: data of effect + * effect: effect to play + * + * Currently this driver supports only rumble effects. + * + */ +static int pmic8058_vib_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct pmic8058_vib *vib = input_get_drvdata(dev); + + vib->speed = effect->u.rumble.strong_magnitude >> 8; + if (!vib->speed) + vib->speed = effect->u.rumble.weak_magnitude >> 9; + schedule_work(&vib->work); + return 0; +} + +static int __devinit pmic8058_vib_probe(struct platform_device *pdev) + +{ + struct pm8058_chip *pm_chip; + struct pmic8058_vib *vib; + const struct pmic8058_vibrator_pdata *pdata = pdev->dev.platform_data; + int rc; + u8 val; + + pm_chip = platform_get_drvdata(pdev); + if (pm_chip == NULL) { + dev_err(&pdev->dev, "no parent data passed in\n"); + return -EINVAL; + } + + if (!pdata) + return -EINVAL; + + if (pdata->level_mV < VIB_MIN_LEVEL_mV || + pdata->level_mV > VIB_MAX_LEVEL_mV) + return -EINVAL; + + vib = kzalloc(sizeof(*vib), GFP_KERNEL); + if (!vib) + return -ENOMEM; + + vib->pm_chip = pm_chip; + vib->pdata = pdata; + vib->dev = &pdev->dev; + + INIT_WORK(&vib->work, pmic8058_work_handler); + + vib->vib_input_dev = input_allocate_device(); + + if (vib->vib_input_dev == NULL) { + dev_err(&pdev->dev, "couldn't allocate input device\n"); + rc = -ENOMEM; + goto err_alloc_dev; + } + + input_set_drvdata(vib->vib_input_dev, vib); + + vib->vib_input_dev->name = "pmic8058_vibrator"; + vib->vib_input_dev->id.version = 1; + vib->vib_input_dev->dev.parent = &pdev->dev; + + /* operate in manual mode */ + rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV); + if (rc < 0) + goto err_read_vib; + val &= ~VIB_DRV_EN_MANUAL_MASK; + rc = pmic8058_vib_write_u8(vib, val, VIB_DRV); + if (rc < 0) + goto err_read_vib; + + vib->reg_vib_drv = val; + + input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE); + + rc = input_ff_create_memless(vib->vib_input_dev, NULL, + pmic8058_vib_play_effect); + if (rc < 0) { + dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n"); + goto err_create_memless; + } + + platform_set_drvdata(pdev, vib); + + rc = input_register_device(vib->vib_input_dev); + if (rc < 0) { + dev_dbg(&pdev->dev, "couldn't register input device\n"); + goto err_reg_input_dev; + } + return 0; + +err_reg_input_dev: + input_ff_destroy(vib->vib_input_dev); +err_create_memless: +err_read_vib: + input_free_device(vib->vib_input_dev); +err_alloc_dev: + kfree(vib); + return rc; +} + +static int __devexit pmic8058_vib_remove(struct platform_device *pdev) +{ + struct pmic8058_vib *vib = platform_get_drvdata(pdev); + + cancel_work_sync(&vib->work); + if (vib->state) + pmic8058_vib_set(vib, 0); + + input_unregister_device(vib->vib_input_dev); + kfree(vib); + return 0; +} + +static struct platform_driver pmic8058_vib_driver = { + .probe = pmic8058_vib_probe, + .remove = __devexit_p(pmic8058_vib_remove), + .driver = { + .name = "pm8058-vib", + .owner = THIS_MODULE, + }, +}; + +static int __init pmic8058_vib_init(void) +{ + return platform_driver_register(&pmic8058_vib_driver); +} +module_init(pmic8058_vib_init); + +static void __exit pmic8058_vib_exit(void) +{ + platform_driver_unregister(&pmic8058_vib_driver); +} +module_exit(pmic8058_vib_exit); + +MODULE_ALIAS("platform:pmic8058_vib"); +MODULE_DESCRIPTION("PMIC8058 vibrator driver based on ff-memless framework"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Amy Maloche "); -- 1.7.3.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/