Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753499Ab1BHELs (ORCPT ); Mon, 7 Feb 2011 23:11:48 -0500 Received: from sm-d311v.smileserver.ne.jp ([203.211.202.206]:24025 "EHLO sm-d311v.smileserver.ne.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750758Ab1BHELr (ORCPT ); Mon, 7 Feb 2011 23:11:47 -0500 From: "Tomoya MORINAGA" To: "'Bhupesh SHARMA'" , "'Wolfgang Grandegger'" Cc: , , References: <20110204124233.GB334@e-circ.dyndns.org><20110204.130649.112613896.davem@davemloft.net><5009516791F146C49C73FAC57C437313@hacdom.okisemi.com><4D4FDEF9.2030305@grandegger.com> Subject: RE: About bittiming calculation result Date: Tue, 8 Feb 2011 13:11:44 +0900 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 In-Reply-To: Thread-Index: AcvGvnY9D/1fOfusQtWXGnU3k7EAIQAar9MgAAWxPiAAAXb6gA== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5994 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 690 Lines: 21 Hi Bhupesh, On Tuesday, February 08, 2011 12:30 PM, Bhupesh SHARMA wrote: > AFAIK pch uses the Bosch C_CAN core internally. > As per Bosch C_CAN user manual tseg1= prop_seg + phase_seg1 > So, ideally tseg1_min should be 2. My version of Bosch C_CAN > driver Uses the value 2. Thank you for your suggestions. I will submit the patch. With Best Regards, ----------------------------------------- Tomoya MORINAGA OKI SEMICONDUCTOR CO., LTD. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/