Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754295Ab1BHM0F (ORCPT ); Tue, 8 Feb 2011 07:26:05 -0500 Received: from mail-ey0-f174.google.com ([209.85.215.174]:48060 "EHLO mail-ey0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754231Ab1BHM0A (ORCPT ); Tue, 8 Feb 2011 07:26:00 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:date:message-id:in-reply-to:references:subject; b=rYswcJq1OfYWN7KB/vGBmEkMuxKl5tx6jRJ2e+QZOxtRq4pQzr6pqUeMBVufIcwR4/ 1jWxCzT1mPs8a6yh6pBU3uwpE8JIpjtHdmCpqds2vscqJPym69lR9YLY9fIlxxdTQAYz s8ejyRX8bL95vlFKYojxl+p2jsh312cilBY0g= From: Bartlomiej Zolnierkiewicz To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org Date: Tue, 08 Feb 2011 13:25:49 +0100 Message-Id: <20110208122549.19110.48619.sendpatchset@linux-mhg7.site> In-Reply-To: <20110208122314.19110.4092.sendpatchset@linux-mhg7.site> References: <20110208122314.19110.4092.sendpatchset@linux-mhg7.site> Subject: [PATCH 18/20] ata_piix: add RDC support Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14587 Lines: 492 >From 4cc4234e2049fa6e97d5a2d3643bb5499e52f838 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 8 Feb 2011 12:39:28 +0100 Subject: [PATCH 18/20] ata_piix: add RDC support Add RDC PATA support to ata_piix and remove no longer needed pata_rdc driver. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/Kconfig | 1 + drivers/ata/Makefile | 1 - drivers/ata/ata_piix.c | 14 ++- drivers/ata/pata_rdc.c | 384 ------------------------------------------------ 4 files changed, 13 insertions(+), 387 deletions(-) delete mode 100644 drivers/ata/pata_rdc.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5a92f24..dc9038d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -567,6 +567,7 @@ config PATA_RADISYS config PATA_RDC tristate "RDC PATA support" depends on PCI + select ATA_PIIX help This option enables basic support for the later RDC PATA controllers controllers via the new ATA layer. For the RDC 1010, you need to diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 7e78491..e627f6d 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -58,7 +58,6 @@ obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o -obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_SCH) += pata_sch.o diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index deb7c96..86d12c2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1,6 +1,9 @@ /* * ata_piix.c - Intel PATA/SATA controllers * + * This is actually a driver for hardware meeting + * INCITS 370-2004 (1510D): ATA Host Adapter Standards + * * Maintained by: Jeff Garzik * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. @@ -249,6 +252,10 @@ static const struct pci_device_id piix_pci_tbl[] = { /* IT8213 */ { 0x1283, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, it8213_pata }, + /* RDC is ICH like */ + { 0x17F3, 0x1011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x17F3, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* SATA ports */ /* 82801EB (ICH5) */ @@ -665,6 +672,7 @@ MODULE_DEVICE_TABLE(pci, piix_pci_tbl); MODULE_VERSION(DRV_VERSION); MODULE_ALIAS("pata_efar"); MODULE_ALIAS("pata_it8213"); +MODULE_ALIAS("pata_rdc"); struct ich_laptop { u16 device; @@ -1670,7 +1678,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, * because some ACPI implementations mess up cable related * bits on _STM. Reported on kernel bz#11879. */ - if (pdev->vendor == PCI_VENDOR_ID_INTEL) + if (pdev->vendor == PCI_VENDOR_ID_INTEL || + pdev->vendor == PCI_VENDOR_ID_RDC) pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg); /* ICH6R may be driven by either ata_piix or ahci driver @@ -1735,7 +1744,8 @@ static void piix_remove_one(struct pci_dev *pdev) struct ata_host *host = dev_get_drvdata(&pdev->dev); struct piix_host_priv *hpriv = host->private_data; - if (pdev->vendor == PCI_VENDOR_ID_INTEL) + if (pdev->vendor == PCI_VENDOR_ID_INTEL || + pdev->vendor == PCI_VENDOR_ID_RDC) pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg); ata_pci_remove_one(pdev); diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c deleted file mode 100644 index a4a0d88..0000000 --- a/drivers/ata/pata_rdc.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * pata_rdc - Driver for later RDC PATA controllers - * - * This is actually a driver for hardware meeting - * INCITS 370-2004 (1510D): ATA Host Adapter Standards - * - * Based on ata_piix. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata_rdc" -#define DRV_VERSION "0.01" - -struct rdc_host_priv { - u32 saved_iocfg; -}; - -/** - * rdc_pata_cable_detect - Probe host controller cable detect info - * @ap: Port for which cable detect info is desired - * - * Read 80c cable indicator from ATA PCI device's PCI config - * register. This register is normally set by firmware (BIOS). - * - * LOCKING: - * None (inherited from caller). - */ - -static int rdc_pata_cable_detect(struct ata_port *ap) -{ - struct rdc_host_priv *hpriv = ap->host->private_data; - u8 mask; - - /* check BIOS cable detect results */ - mask = 0x30 << (2 * ap->port_no); - if ((hpriv->saved_iocfg & mask) == 0) - return ATA_CBL_PATA40; - return ATA_CBL_PATA80; -} - -/** - * rdc_pata_prereset - prereset for PATA host controller - * @link: Target link - * @deadline: deadline jiffies for the operation - * - * LOCKING: - * None (inherited from caller). - */ -static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - static const struct pci_bits rdc_enable_bits[] = { - { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ - { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ - }; - - if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no])) - return -ENOENT; - return ata_sff_prereset(link, deadline); -} - -static DEFINE_SPINLOCK(rdc_lock); - -static void rdc_set_timings(struct ata_port *ap, struct ata_device *adev, - u8 pio, bool use_mwdma) -{ - struct pci_dev *dev = to_pci_dev(ap->host->dev); - unsigned long flags; - unsigned int is_slave = (adev->devno != 0); - unsigned int master_port= ap->port_no ? 0x42 : 0x40; - unsigned int slave_port = 0x44; - u16 master_data; - u8 slave_data; - u8 udma_enable; - int control = 0; - - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - if (pio >= 2 || use_mwdma) - control |= 1; /* TIME1 enable */ - if (ata_pio_need_iordy(adev) || use_mwdma) - control |= 2; /* IE enable */ - if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ - /* If the drive MWDMA is faster than it can do PIO then - we must force PIO into PIO0 */ - if (use_mwdma && adev->pio_mode < (XFER_PIO_0 + pio)) - /* Enable DMA timing only */ - control |= 8; /* PIO cycles in PIO0 */ - - spin_lock_irqsave(&rdc_lock, flags); - - /* PIO configuration clears DTE unconditionally. It will be - * programmed in set_dmamode which is guaranteed to be called - * after set_piomode if any DMA mode is available. - */ - pci_read_config_word(dev, master_port, &master_data); - if (is_slave) { - /* clear TIME1|IE1|PPE1|DTE1 */ - master_data &= 0xff0f; - /* Enable SITRE (separate slave timing register) */ - master_data |= 0x4000; - /* enable PPE1, IE1 and TIME1 as needed */ - master_data |= (control << 4); - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->port_no ? 0x0f : 0xf0); - /* Load the timing nibble for this slave */ - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) - << (ap->port_no ? 4 : 0); - } else { - /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */ - master_data &= 0xccf0; - /* Enable PPE, IE and TIME as appropriate */ - master_data |= control; - /* load ISP and RCT */ - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); - - /* Ensure the UDMA bit is off - it will be turned back on if - UDMA is selected */ - - pci_read_config_byte(dev, 0x48, &udma_enable); - udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); - pci_write_config_byte(dev, 0x48, udma_enable); - - spin_unlock_irqrestore(&rdc_lock, flags); -} - -/** - * rdc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: Drive in question - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - rdc_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0, 0); -} - -/** - * rdc_set_dmamode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: Drive in question - * - * Set UDMA mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - struct pci_dev *dev = to_pci_dev(ap->host->dev); - unsigned long flags; - u8 speed = adev->dma_mode; - int devid = adev->devno + 2 * ap->port_no; - u8 udma_enable = 0; - - if (speed >= XFER_UDMA_0) { - unsigned int udma = speed - XFER_UDMA_0; - u16 udma_timing; - u16 ideconf; - int u_clock, u_speed; - - spin_lock_irqsave(&rdc_lock, flags); - - pci_read_config_byte(dev, 0x48, &udma_enable); - - /* - * UDMA is handled by a combination of clock switching and - * selection of dividers - * - * Handy rule: Odd modes are UDMATIMx 01, even are 02 - * except UDMA0 which is 00 - */ - u_speed = min(2 - (udma & 1), udma); - if (udma == 5) - u_clock = 0x1000; /* 100Mhz */ - else if (udma > 2) - u_clock = 1; /* 66Mhz */ - else - u_clock = 0; /* 33Mhz */ - - udma_enable |= (1 << devid); - - /* Load the CT/RP selection */ - pci_read_config_word(dev, 0x4A, &udma_timing); - udma_timing &= ~(3 << (4 * devid)); - udma_timing |= u_speed << (4 * devid); - pci_write_config_word(dev, 0x4A, udma_timing); - - /* Select a 33/66/100Mhz clock */ - pci_read_config_word(dev, 0x54, &ideconf); - ideconf &= ~(0x1001 << devid); - ideconf |= u_clock << devid; - pci_write_config_word(dev, 0x54, ideconf); - - pci_write_config_byte(dev, 0x48, udma_enable); - - spin_unlock_irqrestore(&rdc_lock, flags); - } else { - /* MWDMA is driven by the PIO timings. */ - unsigned int mwdma = speed - XFER_MW_DMA_0; - const unsigned int needed_pio[3] = { - XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 - }; - int pio = needed_pio[mwdma] - XFER_PIO_0; - - rdc_set_timings(ap, adev, pio, 1); - } -} - -static struct ata_port_operations rdc_pata_ops = { - .inherits = &ata_bmdma32_port_ops, - .cable_detect = rdc_pata_cable_detect, - .set_piomode = rdc_set_piomode, - .set_dmamode = rdc_set_dmamode, - .prereset = rdc_pata_prereset, -}; - -static struct ata_port_info rdc_port_info = { - - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA12_ONLY, - .udma_mask = ATA_UDMA5, - .port_ops = &rdc_pata_ops, -}; - -static struct scsi_host_template rdc_sht = { - ATA_BMDMA_SHT(DRV_NAME), -}; - -/** - * rdc_init_one - Register PIIX ATA PCI device with kernel services - * @pdev: PCI device to register - * @ent: Entry in rdc_pci_tbl matching with @pdev - * - * Called from kernel PCI layer. We probe for combined mode (sigh), - * and then hand over control to libata, for it to do the rest. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int __devinit rdc_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version; - struct device *dev = &pdev->dev; - struct ata_port_info port_info[2]; - const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; - unsigned long port_flags; - struct ata_host *host; - struct rdc_host_priv *hpriv; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, - "version " DRV_VERSION "\n"); - - port_info[0] = rdc_port_info; - port_info[1] = rdc_port_info; - - port_flags = port_info[0].flags; - - /* enable device and prepare host */ - rc = pcim_enable_device(pdev); - if (rc) - return rc; - - hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) - return -ENOMEM; - - /* Save IOCFG, this will be used for cable detection, quirk - * detection and restoration on detach. - */ - pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg); - - rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); - if (rc) - return rc; - host->private_data = hpriv; - - pci_intx(pdev, 1); - - host->flags |= ATA_HOST_PARALLEL_SCAN; - - pci_set_master(pdev); - return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht); -} - -static void rdc_remove_one(struct pci_dev *pdev) -{ - struct ata_host *host = dev_get_drvdata(&pdev->dev); - struct rdc_host_priv *hpriv = host->private_data; - - pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg); - - ata_pci_remove_one(pdev); -} - -static const struct pci_device_id rdc_pci_tbl[] = { - { PCI_DEVICE(0x17F3, 0x1011), }, - { PCI_DEVICE(0x17F3, 0x1012), }, - { } /* terminate list */ -}; - -static struct pci_driver rdc_pci_driver = { - .name = DRV_NAME, - .id_table = rdc_pci_tbl, - .probe = rdc_init_one, - .remove = rdc_remove_one, -#ifdef CONFIG_PM - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -#endif -}; - - -static int __init rdc_init(void) -{ - return pci_register_driver(&rdc_pci_driver); -} - -static void __exit rdc_exit(void) -{ - pci_unregister_driver(&rdc_pci_driver); -} - -module_init(rdc_init); -module_exit(rdc_exit); - -MODULE_AUTHOR("Alan Cox (based on ata_piix)"); -MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, rdc_pci_tbl); -MODULE_VERSION(DRV_VERSION); -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/