Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1755871Ab1BJKII (ORCPT <rfc822;w@1wt.eu>);
	Thu, 10 Feb 2011 05:08:08 -0500
Received: from relay03-haj2.antispameurope.com ([83.246.65.53]:37648 "EHLO
	relay03-haj2.antispameurope.com" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S1755219Ab1BJKIH (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Thu, 10 Feb 2011 05:08:07 -0500
Message-ID: <1527.88.65.119.194.1297332481.squirrel@88.65.119.194>
In-Reply-To: <AANLkTim54zTKwhTEKF-ppq-nbtPRAYRvxH3YL0RJ4Vuc@mail.gmail.com>
References: <46685.88.65.119.194.1297295587.squirrel@88.65.119.194>
    <AANLkTikHbJ+x0nEvdXQpzADwT3XfJNqR6O_WzaEtFWnh@mail.gmail.com>
    <AANLkTin1q=KP5xmj5mzEwOfHsMf=Mz4Ts1EbpGzJPcQX@mail.gmail.com>
    <AANLkTim54zTKwhTEKF-ppq-nbtPRAYRvxH3YL0RJ4Vuc@mail.gmail.com>
Date: Thu, 10 Feb 2011 11:08:01 +0100 (CET)
Subject: Re: [PATCH]ARM: mmp: add Trizeps6 board support
From: "Yupeng Schneider" <yupeng.schneider@ipms.fraunhofer.de>
To: "Eric Miao" <eric.y.miao@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Reply-To: yupeng.schneider@ipms.fraunhofer.de
User-Agent: SquirrelMail/1.5.0
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
X-Priority: 3
Importance: Normal
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 44507
Lines: 1239

Hello Eric,
>
> 2011/2/10 Eric Miao <eric.y.miao@gmail.com>
>
>> Corrected the linux-arm-kernel ML address.
>>
>> On Thu, Feb 10, 2011 at 10:24 AM, Eric Miao <eric.y.miao@gmail.com>
>> wrote:
>> > On Thu, Feb 10, 2011 at 7:53 AM, Yupeng Schneider
>> > <yupeng.schneider@ipms.fraunhofer.de> wrote:
>> >> Hi all,
>> >>
>> >> the following patch add the BSP for the Trizeps6 board with pxa168
>> Processor.
>> >>
>> >> Signed-off-by: Yupeng Schneider <yupeng.schneider@googlemail.com>
>> >
>> > Hi Yupeng,
>> >
>> > This is really a nice patch. I would be better if this can be
>> separated
>> into
>> > some smaller patches further:
>>

thank u

>>
>> > 1. some of the MFP macros in trizeps6.h, they are generic and can be
>> > placed into mfp-pxa168.h, or is there any reason that the macros in
>> > mfp-pxa168.h do not work on your board?
>>

 ok, i will place them into mfp-pxa168.h.  I just thought it is not prefered
to change the mfp-pxa168 file.

>>
>> > 2. individual patches for adding uart3, audio, and cpld
>>

 i would very glad to make them in small patchs. i am just now on travel,
and will do that in several days when i am back.

>>
>> > 3. then the patch for the board
>> >
>> > Sounds OK? Let me know your ideas.
>>

AC97+UCB1400: Sound and Touchscreen is ok. The related pxa2xx-ac97 files
have to be modified, the changes are not in this patch. If u want, i can
patch them later too.

yours,
Yupeng

>> >
>> > Thanks
>> > - eric
>> >
>> >> ---
>> >>  arch/arm/mach-mmp/Kconfig                      |   29 ++
>> >>  arch/arm/mach-mmp/Makefile                     |    1 +
>> >>  arch/arm/mach-mmp/include/mach/audio.h         |   29 ++
>> >>  arch/arm/mach-mmp/include/mach/pxa168.h        |   21 +
>> >>  arch/arm/mach-mmp/include/mach/regs-apmu.h     |    1 +
>> >>  arch/arm/mach-mmp/include/mach/trizeps6.h      |  122 ++++++
>> >>  arch/arm/mach-mmp/include/mach/trizeps6_cpld.h |   87 +++++
>> >>  arch/arm/mach-mmp/pxa168.c                     |   10 +
>> >>  arch/arm/mach-mmp/trizeps6.c                   |  469
>> >> ++++++++++++++++++++++++
>> >>  arch/arm/mach-mmp/trizeps6_cpld.c              |  145 ++++++++
>> >>  10 files changed, 914 insertions(+), 0 deletions(-)
>> >>  create mode 100755 arch/arm/mach-mmp/include/mach/audio.h
>> >>  create mode 100755 arch/arm/mach-mmp/include/mach/trizeps6.h
>> >>  create mode 100755 arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
>> create
>> >> mode 100755 arch/arm/mach-mmp/trizeps6.c
>> >>  create mode 100755 arch/arm/mach-mmp/trizeps6_cpld.c
>> >>
>> >> diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
>> index
>> >> 0711d3b..8c6be81 100644
>> >> --- a/arch/arm/mach-mmp/Kconfig
>> >> +++ b/arch/arm/mach-mmp/Kconfig
>> >> @@ -64,6 +64,35 @@ config MACH_TETON_BGA
>> >>          Say 'Y' here if you want to support the Marvell PXA168-based
>> >>          Teton BGA Development Board.
>> >>
>> >> +comment "Third Party Dev Platforms (sorted by vendor name)"
>> >> +
>> >> +config MACH_TRIZEPS6
>> >> +       bool "Keith und Koep Trizeps6 DIMM-Module"
>> >> +       select TRIZEPS6_PCMCIA
>> >> +       select CPU_PXA168
>> >> +       help
>> >> +         Say 'Y' here if you want to support TRIZEPS VI board
>> Development Board.
>> >> +
>> >> +choice
>> >> +       prompt "Select base board for Trizeps module"
>> >> +       depends on MACH_TRIZEPS6
>> >> +
>> >> +config MACH_TRIZEPS6_CONXS
>> >> +       bool "ConXS Eval Board"
>> >> +
>> >> +config MACH_TRIZEPS6_UCONXS
>> >> +       bool "uConXS Eval Board"
>> >> +
>> >> +config MACH_TRIZEPS6_ANY
>> >> +       bool "another Board"
>> >> +
>> >> +endchoice
>> >> +
>> >> +config TRIZEPS6_PCMCIA
>> >> +       bool
>> >> +       help
>> >> +         Enable PCMCIA support for Trizeps modules
>> >> +
>> >>  endmenu
>> >>
>> >>  config CPU_PXA168
>> >> diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
>> index
>> >> 751cdbf..1b8744f 100644
>> >> --- a/arch/arm/mach-mmp/Makefile
>> >> +++ b/arch/arm/mach-mmp/Makefile
>> >> @@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_TTC_DKB)    += ttc_dkb.o
>> >>  obj-$(CONFIG_MACH_FLINT)       += flint.o
>> >>  obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
>> >>  obj-$(CONFIG_MACH_TETON_BGA)   += teton_bga.o
>> >> +obj-$(CONFIG_MACH_TRIZEPS6)    += trizeps6.o trizeps6_cpld.o
>> >> diff --git a/arch/arm/mach-mmp/include/mach/audio.h
>> >> b/arch/arm/mach-mmp/include/mach/audio.h
>> >> index 0000000..6ef474f
>> >> --- /dev/null
>> >> +++ b/arch/arm/mach-mmp/include/mach/audio.h
>> >> @@ -0,0 +1,29 @@
>> >> +#ifndef __ASM_ARCH_AUDIO_H__
>> >> +#define __ASM_ARCH_AUDIO_H__
>> >> +
>> >> +#include <sound/core.h>
>> >> +#include <sound/pcm.h>
>> >> +#include <sound/ac97_codec.h>
>> >> +
>> >> +/*
>> >> + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
>> >> + *              a -1 value means no gpio will be used for reset
>> >> + * @codec_pdata: AC97 codec platform_data
>> >> +
>> >> + * reset_gpio should only be specified for pxa27x CPUs where a
>> silicon
>> +
>> >> * bug prevents correct operation of the reset line. If not specified,
>> +
>> *
>> >> the default behaviour on these CPUs is to consider gpio 113 as the +
>> *
>> >> AC97 reset line, which is the default on most boards.
>> >> + */
>> >> +struct pxa2xx_audio_ops_t {
>> >> +       int (*startup)(struct snd_pcm_substream *, void *);
>> >> +       void (*shutdown)(struct snd_pcm_substream *, void *);
>> >> +       void (*suspend)(void *);
>> >> +       void (*resume)(void *);
>> >> +       void *priv;
>> >> +       int reset_gpio;
>> >> +       void *codec_pdata[AC97_BUS_MAX_DEVICES];
>> >> +};
>> >> +
>> >> +
>> >> +#endif
>> >> diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h
>> >> b/arch/arm/mach-mmp/include/mach/pxa168.h
>> >> index 1801e42..c4a9977 100644
>> >> --- a/arch/arm/mach-mmp/include/mach/pxa168.h
>> >> +++ b/arch/arm/mach-mmp/include/mach/pxa168.h
>> >> @@ -14,9 +14,12 @@ extern void pxa168_clear_keypad_wakeup(void);
>> >>  #include <video/pxa168fb.h>
>> >>  #include <plat/pxa27x_keypad.h>
>> >>  #include <mach/cputype.h>
>> >> +#include <linux/pxa168_eth.h>
>> >> +#include <mach/audio.h>
>> >>
>> >>  extern struct pxa_device_desc pxa168_device_uart1;
>> >>  extern struct pxa_device_desc pxa168_device_uart2;
>> >> +extern struct pxa_device_desc pxa168_device_uart3;
>> >>  extern struct pxa_device_desc pxa168_device_twsi0;
>> >>  extern struct pxa_device_desc pxa168_device_twsi1;
>> >>  extern struct pxa_device_desc pxa168_device_pwm1;
>> >> @@ -31,6 +34,9 @@ extern struct pxa_device_desc pxa168_device_ssp5;
>> >>  extern struct pxa_device_desc pxa168_device_nand;
>> >>  extern struct pxa_device_desc pxa168_device_fb;
>> >>  extern struct pxa_device_desc pxa168_device_keypad;
>> >> +extern struct pxa_device_desc pxa168_device_mfu;
>> >> +extern struct pxa_device_desc pxa168_device_ac97;
>> >> +
>> >>
>> >>  static inline int pxa168_add_uart(int id)
>> >>  {
>> >> @@ -39,6 +45,7 @@ static inline int pxa168_add_uart(int id)
>> >>        switch (id) {
>> >>        case 1: d = &pxa168_device_uart1; break;
>> >>        case 2: d = &pxa168_device_uart2; break;
>> >> +       case 3: d = &pxa168_device_uart3; break;
>> >>        }
>> >>
>> >>        if (d == NULL)
>> >> @@ -117,4 +124,18 @@ static inline int pxa168_add_keypad(struct
>> >> pxa27x_keypad_platform_data *data)
>> >>        return pxa_register_device(&pxa168_device_keypad, data,
>> sizeof(*data));
>> >>  }
>> >>
>> >> +static inline int pxa168_add_mfu(struct pxa168_eth_platform_data
>> *data)
>> +{
>> >> +#if defined(CONFIG_PXA168_ETH)
>> >> +       return pxa_register_device(&pxa168_device_mfu, data,
>> sizeof(*data)); +#else
>> >> +       return 0;
>> >> +#endif
>> >> +}
>> >> +
>> >> +static inline int pxa168_add_ac97(struct pxa2xx_audio_ops_t *ops) +{
>> >> +       return pxa_register_device(&pxa168_device_ac97, ops ,
>> sizeof(*ops)); +}
>> >> +
>> >>  #endif /* __ASM_MACH_PXA168_H */
>> >> diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h
>> >> b/arch/arm/mach-mmp/include/mach/regs-apmu.h
>> >> index ac47023..68d39bc 100644
>> >> --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
>> >> +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
>> >> @@ -27,6 +27,7 @@
>> >>  #define APMU_DMA       APMU_REG(0x064)
>> >>  #define APMU_GEU       APMU_REG(0x068)
>> >>  #define APMU_BUS       APMU_REG(0x06c)
>> >> +#define APMU_MFU       APMU_REG(0x0fc)
>> >>
>> >>  #define APMU_FNCLK_EN  (1 << 4)
>> >>  #define APMU_AXICLK_EN (1 << 3)
>> >> diff --git a/arch/arm/mach-mmp/include/mach/trizeps6.h
>> >> b/arch/arm/mach-mmp/include/mach/trizeps6.h
>> >> index 0000000..40b526a
>> >> --- /dev/null
>> >> +++ b/arch/arm/mach-mmp/include/mach/trizeps6.h
>> >> @@ -0,0 +1,122 @@
>> >>
>> +/************************************************************************
>> >> + * Include file for TRIZEPS6 SoM and ConXS eval-board
>> >> + * Copyright (c) Yupeng Schneider
>> >> + * 2010
>> >> +
>> >>
>> ************************************************************************/
>> +
>> >> +/*
>> >> + * Includes/Defines
>> >> + */
>> >> +#ifndef _TRIPEPS6_H_
>> >> +#define _TRIPEPS6_H_
>> >> +
>> >> +#define STUART_SODIMM  1
>> >> +
>> >> +/* UART */
>> >> +#define GPIO104_UART1_DSR      MFP_CFG(GPIO104, AF2)
>> >> +#define GPIO105_UART1_DCD      MFP_CFG(GPIO105, AF2)
>> >> +#define GPIO107_UART2_TXD      MFP_CFG_DRV(GPIO126, AF2, FAST)
>> >> +#define GPIO107_UART2_RXD      MFP_CFG_DRV(GPIO36, AF2, FAST)
>> >> +#define GPIO109_UART2_CTS      MFP_CFG(GPIO123, AF2)
>> >> +#define GPIO109_UART2_RTS      MFP_CFG(GPIO124, AF2)
>> >> +#define GPIO30_UART3_TXD       MFP_CFG_DRV(GPIO30, AF2, FAST)
>> >> +#define GPIO31_UART3_RXD       MFP_CFG_DRV(GPIO31, AF2, FAST)
>> >> +#define GPIO32_UART3_CTS       MFP_CFG(GPIO32, AF2)
>> >> +#define GPIO33_UART3_RTS       MFP_CFG(GPIO33, AF2)
>> >> +
>> >> +/* MMC2 */
>> >> +#define        GPIO122_MMC2_DAT3       MFP_CFG_DRV(GPIO122, AF4,
>> FAST)
>> >> +#define        GPIO121_MMC2_DAT2       MFP_CFG_DRV(GPIO121, AF4,
>> FAST)
>> >> +#define        GPIO120_MMC2_DAT1       MFP_CFG_DRV(GPIO120, AF4,
>> FAST)
>> >> +#define        GPIO119_MMC2_DAT0       MFP_CFG_DRV(GPIO119, AF4,
>> FAST)
>> >> +#define        GPIO28_MMC2_CMD         MFP_CFG_DRV(GPIO28, AF6,
>> FAST)
>> >> +#define        GPIO29_MMC2_CLK         MFP_CFG_DRV(GPIO29, AF6,
>> FAST)
>> >> +#define GPIO53_MMC2_CD         MFP_CFG(GPIO53, AF0)
>> >> +
>> >> +/*MMC4*/
>> >> +#define        GPIO78_MMC4_DAT3        MFP_CFG_DRV(GPIO78, AF5,
>> FAST)
>> >> +#define        GPIO79_MMC4_DAT2        MFP_CFG_DRV(GPIO79, AF5,
>> FAST)
>> >> +#define        GPIO80_MMC4_DAT1        MFP_CFG_DRV(GPIO80, AF5,
>> FAST)
>> >> +#define        GPIO81_MMC4_DAT0        MFP_CFG_DRV(GPIO81, AF5,
>> FAST)
>> >> +#define        GPIO82_MMC4_CMD         MFP_CFG_DRV(GPIO82, AF5,
>> FAST)
>> >> +#define        GPIO83_MMC4_CLK         MFP_CFG_DRV(GPIO83, AF5,
>> FAST)
>> >> +
>> >> +/* I2C */
>> >> +#define GPIO102_CI2C_SDA       MFP_CFG(GPIO102, AF1)
>> >> +
>> >> +/* MFU */
>> >> +#define GPIO86_TX_CLK   MFP_CFG(GPIO86, AF5)
>> >> +#define GPIO87_TX_EN    MFP_CFG(GPIO87, AF5)
>> >> +#define GPIO88_TX_DQ3   MFP_CFG(GPIO88, AF5)
>> >> +#define GPIO89_TX_DQ2   MFP_CFG(GPIO89, AF5)
>> >> +#define GPIO90_TX_DQ1   MFP_CFG(GPIO90, AF5)
>> >> +#define GPIO91_TX_DQ0   MFP_CFG(GPIO91, AF5)
>> >> +#define GPIO92_MII_CRS   MFP_CFG(GPIO92, AF5)
>> >> +#define GPIO93_MII_COL   MFP_CFG(GPIO93, AF5)
>> >> +#define GPIO94_RX_CLK   MFP_CFG(GPIO94, AF5)
>> >> +#define GPIO95_RX_ER   MFP_CFG(GPIO95, AF5)
>> >> +#define GPIO96_RX_DQ3   MFP_CFG(GPIO96, AF5)
>> >> +#define GPIO97_RX_DQ2   MFP_CFG(GPIO97, AF5)
>> >> +#define GPIO98_RX_DQ1   MFP_CFG(GPIO98, AF5)
>> >> +#define GPIO99_RX_DQ0   MFP_CFG(GPIO99, AF5)
>> >> +#define GPIO100_MII_MDC   MFP_CFG(GPIO100, AF5)
>> >> +#define GPIO101_MII_MDIO   MFP_CFG(GPIO101, AF5)
>> >> +#define GPIO103_RX_DV   MFP_CFG(GPIO103, AF5)
>> >> +
>> >> +/* AC97 */
>> >> +#define GPIO115_AC97_BITCLK    MFP_CFG(GPIO115, AF6)
>> >> +#define GPIO114_AC97_SDATA_IN_0        MFP_CFG(GPIO114, AF6)
>> >> +#define GPIO116_AC97_SDATA_IN_1        MFP_CFG(GPIO116, AF6)
>> >> +#define GPIO117_AC97_SDATA_OUT MFP_CFG(GPIO117, AF6)
>> >> +#define GPIO118_AC97_SYNC      MFP_CFG(GPIO118, AF6)
>> >> +
>> >> +
>> >> +
>> >> +#define TRIZEPS6_PHYS_BASE             0xd4000000
>> >> +
>> >> +
>> >> +#define TRIZEPS6_PIC_PHYS      (0x88000000)    /* CS0-3 Logic chip
>> on
>> ConXS */
>> >> +                               /* Logic on ConXS-board CSFR
>> register*/
>> >> +#define TRIZEPS6_CFSR_PHYS     (TRIZEPS6_PIC_PHYS)
>> >> +                               /* Logic on ConXS-board BOCR
>> register*/
>> >> +#define TRIZEPS6_BOCR_PHYS     (TRIZEPS6_PIC_PHYS+0x00200000)
>> >> +                               /* Logic on ConXS-board IRCR
>> register*/
>> >> +#define TRIZEPS6_IRCR_PHYS     (TRIZEPS6_PIC_PHYS+0x00300000)
>> >> +                               /* Logic on ConXS-board UPSR
>> register*/
>> >> +#define TRIZEPS6_UPSR_PHYS     (TRIZEPS6_PIC_PHYS+0x00280000)
>> >> +                               /* Logic on ConXS-board DICR
>> register*/
>> >> +#define TRIZEPS6_DICR_PHYS     (TRIZEPS6_PIC_PHYS+0x00380000)
>> >> +
>> >> +
>> >> +#define TRIZEPS6_CPLD_PHYS  (0x8e000000) /* CPLD on Trizeps6 module
>> */
>> +
>> >> +#define TRIZEPS6_CPLD_CTRL_PHYS (TRIZEPS6_CPLD_PHYS)
>> >> +#define TRIZEPS6_CPLD_FTUR_PHYS (TRIZEPS6_CPLD_PHYS+0x4)
>> >> +#define TRIZEPS6_CPLD_HIBE_PHYS (TRIZEPS6_CPLD_PHYS+0x8)
>> >> +#define TRIZEPS6_CPLD_PWM_PHYS (TRIZEPS6_CPLD_PHYS+0xc)
>> >> +#define TRIZEPS6_CPLD_PLDR_PHYS (TRIZEPS6_CPLD_PHYS+0x10)
>> >> +#define TRIZEPS6_CPLD_PSET_PHYS (TRIZEPS6_CPLD_PHYS+0x14)
>> >> +#define TRIZEPS6_CPLD_TTLO_PHYS (TRIZEPS6_CPLD_PHYS+0x18)
>> >> +
>> >> +
>> >> +/* MMC socket */
>> >> +#define GPIO_MMC2_DET          53
>> >> +#define TRIZEPS6_MMC2_IRQ      IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO53))
>> >> +#define GPIO_MMC4_DET          41
>> >> +#define TRIZEPS6_MMC4_IRQ      IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO41)
>> >> +
>> >> +/* Off-module PIC on ConXS board */
>> >> +#define GPIO_PIC               51
>> >> +#define TRIZEPS6_PIC_IRQ       IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO51)
>> >> +
>> >> +/* PCMCIA socket Compact Flash */
>> >> +#define GPIO_PCD               43              /* PCMCIA Card Detect
>> */
>> >> +#define TRIZEPS6_CD_IRQ
>>  IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO43)
>> >> +#define GPIO_PRDY              113             /* READY / nINT */
>> >> +#define TRIZEPS6_READY_NINT    IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO113)
>> +
>> >> +#define trizeps6_GPIO_CODEC_IRQ                116
>> >> +
>> >> +extern void trizeps6_ac97_acreset(int i);
>> >> +
>> >> +#endif /* _TRIPEPS6_H_ */
>> >> diff --git a/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
>> >> b/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
>> >> index 0000000..8538a6b
>> >> --- /dev/null
>> >> +++ b/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
>> >> @@ -0,0 +1,87 @@
>> >> +#ifndef _TRIPEPS6_CPLD_H_
>> >> +#define _TRIPEPS6_CPLD_H_
>> >> +
>> >> +/* index of resource */
>> >> +#define CTRL_S         0
>> >> +#define CTRL_R         1
>> >> +#define FTUR_S         2
>> >> +#define FTUR_R         3
>> >> +#define HIBE_S         4
>> >> +#define HIBE_R         5
>> >> +#define PWM            6
>> >> +#define PLDR_S         7
>> >> +#define PLDR_R         8
>> >> +#define PSET_S         9
>> >> +#define PSET_R         10
>> >> +#define TTLO_S         11
>> >> +#define TTLO_R         12
>> >> +
>> >> +#define CPLD_CTRL_S cpld.addr[CTRL_S].val
>> >> +#define CPLD_CTRL_R cpld.addr[CTRL_R].val
>> >> +#define CPLD_CONTROL_GR                        (1 << 0)
>> >> +#define CPLD_CONTROL_CODEC             (1 << 2)
>> >> +#define CPLD_CONTROL_ETHPHY            (1 << 3)
>> >> +#define CPLD_CONTROL_RWL               (1 << 4)
>> >> +#define CPLD_CONTROL_RBT               (1 << 5)
>> >> +
>> >> +#define CPLD_FTUR_S cpld.addr[FTUR_S].val
>> >> +#define CPLD_FTUR_R cpld.addr[FTUR_R].val
>> >> +#define CPLD_FEATURE_UART3_SODIMM      (1 << 0)
>> >> +#define CPLD_FEATURE_UART3_BT          (1 << 1)
>> >> +#define CPLD_FEATURE_CF_MODE           (1 << 2)
>> >> +#define CPLD_FEATURE_TTLIO             (1 << 3)
>> >> +#define CPLD_PWM_SODIMM_P69            (1 << 4)
>> >> +#define CPLD_PWM_SODIMM_P77            (1 << 5)
>> >> +#define CPLD_PWM_SODIMM_P106   (1 << 6)
>> >> +#define CPLD_BT_PWM_SODIMM             (1 << 7)
>> >> +
>> >> +#define CPLD_HIBE_S cpld.addr[HIBE_S].val
>> >> +#define CPLD_HIBE_R cpld.addr[HIBE_R].val
>> >> +#define CPLD_HIBERNATE_MODE                            (1 << 0)
>> >> +#define CPLD_HIBERNATE_WAKE_TOUCH              (1 << 1)
>> >> +#define CPLD_HIBERNATE_WAKE_PMIC               (1 << 2)
>> >> +#define CPLD_HIBERNATE_WAKE_IRQ_P43            (1 << 3)
>> >> +
>> >> +#define CPLD_PWM cpld.addr[PWM].val
>> >> +
>> >> +#define CPLD_PINLDR    cpld.addr[PINLDR].val
>> >> +#define CPLD_PINLDR_P69                                        (1 <<
>> 0)
>> >> +#define CPLD_PINLDR_P100_PSKTSEL               (1 << 1)
>> >> +#define CPLD_PINLDR_P98_CFNREG                 (1 << 2)
>> >> +#define CPLD_PINLDR_P104_CFNIOIS16             (1 << 3)
>> >> +#define CPLD_PINLDR_P93_RDNWR                  (1 << 4)
>> >> +#define CPLD_PINLDR_P104_IRQ_P43               (1 << 5)
>> >> +
>> >> +#define CPLD_PSET_S cpld.addr[PSET_S].val
>> >> +#define CPLD_PSET_R cpld.addr[PSET_R].val
>> >> +#define CPLD_PINSET_P69                                        (1 <<
>> 0)
>> >> +#define CPLD_PINSET_P100_PSKTSEL               (1 << 1)
>> >> +#define CPLD_PINSET_P98_CFNREG                 (1 << 2)
>> >> +#define CPLD_PINSET_P104_CFNIOIS16             (1 << 3)
>> >> +#define CPLD_PINSET_P93_RDnWR                  (1 << 4)
>> >> +
>> >> +#define CPLD_TTLO_S cpld.addr[TTLO_S].val
>> >> +#define CPLD_TTLO_R cpld.addr[TTLO_R].val
>> >> +#define CPLD_TTLIO_W_A8                        (1 << 0)
>> >> +#define CPLD_TTLIO_W_A9                        (1 << 1)
>> >> +#define CPLD_TTLIO_W_A10               (1 << 2)
>> >> +#define CPLD_TTLIO_W_A11               (1 << 3)
>> >> +#define CPLD_TTLIO_W_A12               (1 << 4)
>> >> +#define CPLD_TTLIO_W_A13               (1 << 5)
>> >> +#define CPLD_TTLIO_W_A14               (1 << 6)
>> >> +#define CPLD_TTLIO_W_A15               (1 << 7)
>> >> +#define CPLD_TTLIO_r_A0                        (1 << 0)
>> >> +#define CPLD_TTLIO_r_A1                        (1 << 1)
>> >> +#define CPLD_TTLIO_r_A2                        (1 << 2)
>> >> +#define CPLD_TTLIO_r_A3                        (1 << 3)
>> >> +#define CPLD_TTLIO_r_A4                        (1 << 4)
>> >> +#define CPLD_TTLIO_r_A5                        (1 << 5)
>> >> +#define CPLD_TTLIO_r_A6                        (1 << 6)
>> >> +#define CPLD_TTLIO_r_A7                        (1 << 7)
>> >> +
>> >> +
>> >> +
>> >> +extern unsigned short trizeps6_cpld_readw(unsigned int reg);
>> >> +extern inline void trizeps6_cpld_writew(unsigned int reg, unsigned
>> short
>> >> value);
>> >> +
>> >> +#endif /* _TRIPEPS6_CPLD_H_ */
>> >> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
>> index
>> >> 72b4e76..9c2396e 100644
>> >> --- a/arch/arm/mach-mmp/pxa168.c
>> >> +++ b/arch/arm/mach-mmp/pxa168.c
>> >> @@ -66,6 +66,7 @@ void __init pxa168_init_irq(void)
>> >>  /* APB peripheral clocks */
>> >>  static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
>> >>  static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
>> >> +static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
>> >>  static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
>> >>  static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
>> >>  static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
>> >> @@ -78,14 +79,18 @@ static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
>> >>  static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
>> >>  static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
>> >>  static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
>> >> +static APBC_CLK(ac97, PXA168_AC97, 0, 24576000);
>> >> +
>> >>
>> >>  static APMU_CLK(nand, NAND, 0x01db, 208000000);
>> >>  static APMU_CLK(lcd, LCD, 0x7f, 312000000);
>> >> +static APMU_CLK(mfu, MFU, 0x9, 0);
>> >>
>> >>  /* device and clock bindings */
>> >>  static struct clk_lookup pxa168_clkregs[] = {
>> >>        INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
>> >>        INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
>> >> +       INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
>> >>        INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
>> >>        INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
>> >>        INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
>> >> @@ -100,6 +105,8 @@ static struct clk_lookup pxa168_clkregs[] = {
>> >>        INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
>> >>        INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
>> >>        INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
>> >> +       INIT_CLKREG(&clk_mfu, "pxa168-eth", "MFUCLK"),
>> >> +       INIT_CLKREG(&clk_ac97, "pxa2xx-ac97", "AC97CLK"),
>> >>  };
>> >>
>> >>  static int __init pxa168_init(void)
>> >> @@ -149,6 +156,7 @@ void pxa168_clear_keypad_wakeup(void)
>> >>  /* on-chip devices */
>> >>  PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21,
>> 22);
>> >> PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23,
>> 24);
>> >> +PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23,
>> 24);
>> >>  PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
>> >>  PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
>> >>  PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
>> >> @@ -163,3 +171,5 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4,
>> 0xd4020000,
>> >> 0x40, 58, 59);
>> >>  PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60,
>> 61);
>> >> PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
>> >>  PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000,
>> 0x4c);
>> >> +PXA168_DEVICE(mfu, "pxa168-eth", -1, MFU, 0xc0800000, 0x0FFF);
>> >> +PXA168_DEVICE(ac97, "pxa2xx-ac97", -1, AC97, 0xd402B000, 0x0fff);
>> diff
>> >> --git a/arch/arm/mach-mmp/trizeps6.c b/arch/arm/mach-mmp/trizeps6.c
>> index
>> >> 0000000..a935f14
>> >> --- /dev/null
>> >> +++ b/arch/arm/mach-mmp/trizeps6.c
>> >> @@ -0,0 +1,469 @@
>> >> +/*
>> >> + *  linux/arch/arm/mach-mmp/trizeps6.c
>> >> + *
>> >> + *  Support for the Keith und Koep Trizeps6 Modul Platform
>> >> + *  based on Marvell PXA168-CPU
>> >> + *
>> >> + *  Author:    Yupeng Schneider
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>> modify
>> >> + *  it under the terms of the GNU General Public License version 2
>> as +
>> *
>> >>  publishhed by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/init.h>
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/platform_device.h>
>> >> +#include <linux/mtd/mtd.h>
>> >> +#include <linux/mtd/partitions.h>
>> >> +#include <linux/mtd/nand.h>
>> >> +#include <linux/delay.h>
>> >> +#include <asm/mach-types.h>
>> >> +#include <asm/mach/arch.h>
>> >> +#include <mach/addr-map.h>
>> >> +#include <mach/mfp-pxa168.h>
>> >> +#include <mach/pxa168.h>
>> >> +#include <mach/gpio.h>
>> >> +#include <linux/pxa168_eth.h>
>> >> +#include <mach/irqs.h>
>> >> +#include <mach/trizeps6.h>
>> >> +#include <mach/trizeps6_cpld.h>
>> >> +#include "common.h"
>> >> +#include <linux/mmc/sdhci.h>
>> >> +#include <linux/ucb1400.h>
>> >> +#include <mach/audio.h>
>> >> +
>> >> +
>> >> +static unsigned long trizeps6_pin_config[] __initdata = {
>> >> +       /* Data Flash Interface */
>> >> +       GPIO0_DFI_D15,
>> >> +       GPIO1_DFI_D14,
>> >> +       GPIO2_DFI_D13,
>> >> +       GPIO3_DFI_D12,
>> >> +       GPIO4_DFI_D11,
>> >> +       GPIO5_DFI_D10,
>> >> +       GPIO6_DFI_D9,
>> >> +       GPIO7_DFI_D8,
>> >> +       GPIO8_DFI_D7,
>> >> +       GPIO9_DFI_D6,
>> >> +       GPIO10_DFI_D5,
>> >> +       GPIO11_DFI_D4,
>> >> +       GPIO12_DFI_D3,
>> >> +       GPIO13_DFI_D2,
>> >> +       GPIO14_DFI_D1,
>> >> +       GPIO15_DFI_D0,
>> >> +
>> >> +       /* Static Memory Controller */
>> >> +       GPIO18_SMC_nCS0,
>> >> +       GPIO34_SMC_nCS1,
>> >> +       GPIO23_SMC_nLUA,
>> >> +       GPIO25_SMC_nLLA,
>> >> +       GPIO28_SMC_RDY,
>> >> +       GPIO29_SMC_SCLK,
>> >> +       GPIO35_SMC_BE1,
>> >> +       GPIO36_SMC_BE2,
>> >> +
>> >> +
>> >> +       /* UART1 */
>> >> +       GPIO107_UART1_RXD,
>> >> +       GPIO108_UART1_TXD,
>> >> +       GPIO107_UART1_RXD,
>> >> +       GPIO108_UART1_TXD,
>> >> +       GPIO109_UART1_RTS,
>> >> +       GPIO110_UART1_CTS,
>> >> +       GPIO111_UART1_RI,
>> >> +       GPIO104_UART1_DSR,
>> >> +       GPIO112_UART1_DTR,
>> >> +       GPIO105_UART1_DCD,
>> >> +
>> >> +       /* UART2 */
>> >> +       GPIO107_UART2_TXD,
>> >> +       GPIO107_UART2_RXD,
>> >> +       GPIO109_UART2_CTS,
>> >> +       GPIO109_UART2_RTS,
>> >> +
>> >> +       /* UART3 */
>> >> +       GPIO30_UART3_TXD,
>> >> +       GPIO31_UART3_RXD,
>> >> +       GPIO32_UART3_CTS,
>> >> +       GPIO33_UART3_RTS,
>> >> +
>> >> +
>> >> +       /* MFU */
>> >> +       GPIO86_TX_CLK,
>> >> +       GPIO87_TX_EN,
>> >> +       GPIO88_TX_DQ3,
>> >> +       GPIO89_TX_DQ2,
>> >> +       GPIO90_TX_DQ1,
>> >> +       GPIO91_TX_DQ0,
>> >> +       GPIO92_MII_CRS,
>> >> +       GPIO93_MII_COL,
>> >> +       GPIO94_RX_CLK,
>> >> +       GPIO95_RX_ER,
>> >> +       GPIO96_RX_DQ3,
>> >> +       GPIO97_RX_DQ2,
>> >> +       GPIO98_RX_DQ1,
>> >> +       GPIO99_RX_DQ0,
>> >> +       GPIO100_MII_MDC,
>> >> +       GPIO101_MII_MDIO,
>> >> +       GPIO103_RX_DV,
>> >> +
>> >> +       /* USB OTG */
>> >> +       GPIO85_GPIO,
>> >> +       GPIO47_GPIO,
>> >> +
>> >> +       /* i2c bus */
>> >> +       GPIO102_CI2C_SDA,
>> >> +       GPIO106_CI2C_SCL,
>> >> +
>> >> +
>> >> +       /* MMC2 */
>> >> +       GPIO122_MMC2_DAT3 | MFP_PULL_HIGH,
>> >> +       GPIO121_MMC2_DAT2 | MFP_PULL_HIGH,
>> >> +       GPIO120_MMC2_DAT1 | MFP_PULL_HIGH,
>> >> +       GPIO119_MMC2_DAT0 | MFP_PULL_HIGH,
>> >> +       GPIO28_MMC2_CMD | MFP_PULL_HIGH,
>> >> +       GPIO29_MMC2_CLK,
>> >> +       GPIO53_MMC2_CD | MFP_PULL_LOW,                  /*
>> TRIZEPS6_MMC2_IRQ */
>> >> +
>> >> +       /* MMC4 */
>> >> +       GPIO78_MMC4_DAT3 | MFP_PULL_HIGH,
>> >> +       GPIO79_MMC4_DAT2 | MFP_PULL_HIGH,
>> >> +       GPIO80_MMC4_DAT1 | MFP_PULL_HIGH,
>> >> +       GPIO81_MMC4_DAT0 | MFP_PULL_HIGH,
>> >> +       GPIO82_MMC4_CMD | MFP_PULL_HIGH,
>> >> +       GPIO83_MMC4_CLK,
>> >> +
>> >> +       /* LCD */
>> >> +       GPIO56_LCD_FCLK_RD,
>> >> +       GPIO57_LCD_LCLK_A0,
>> >> +       GPIO58_LCD_PCLK_WR,
>> >> +       GPIO59_LCD_DENA_BIAS,
>> >> +       GPIO60_LCD_DD0,
>> >> +       GPIO61_LCD_DD1,
>> >> +       GPIO62_LCD_DD2,
>> >> +       GPIO63_LCD_DD3,
>> >> +       GPIO64_LCD_DD4,
>> >> +       GPIO65_LCD_DD5,
>> >> +       GPIO66_LCD_DD6,
>> >> +       GPIO67_LCD_DD7,
>> >> +       GPIO68_LCD_DD8,
>> >> +       GPIO69_LCD_DD9,
>> >> +       GPIO70_LCD_DD10,
>> >> +       GPIO71_LCD_DD11,
>> >> +       GPIO72_LCD_DD12,
>> >> +       GPIO73_LCD_DD13,
>> >> +       GPIO74_LCD_DD14,
>> >> +       GPIO75_LCD_DD15,
>> >> +
>> >> +
>> >> +       /* AC97 */
>> >> +       GPIO115_AC97_BITCLK,
>> >> +       GPIO114_AC97_SDATA_IN_0,
>> >> +       GPIO117_AC97_SDATA_OUT,
>> >> +       GPIO118_AC97_SYNC,
>> >> +       GPIO116_GPIO,
>> >> +
>> >> +
>> >> +       GPIO51_GPIO,                    /* TRIZEPS6_PIC_IRQ */
>> >> +       GPIO27_GPIO,                    /* Ethernet IRQ */
>> >> +};
>> >> +
>> >> +
>> >> +
>> >>
>> +/****************************************************************************
>> >> + * CPLD
>> >> +
>> >>
>> ****************************************************************************/
>> >> +
>> >> +static struct resource tri6_cpld_resources[] = {
>> >> +       [CTRL_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_CTRL_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_CTRL_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [CTRL_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_CTRL_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_CTRL_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [FTUR_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_FTUR_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_FTUR_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [FTUR_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_FTUR_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_FTUR_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [HIBE_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_HIBE_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_HIBE_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [HIBE_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_HIBE_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_HIBE_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [PWM] = {
>> >> +               .start  = TRIZEPS6_CPLD_PWM_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_PWM_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [PLDR_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_PLDR_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_PLDR_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [PLDR_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_PLDR_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_PLDR_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [PSET_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_PSET_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_PSET_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [PSET_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_PSET_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_PSET_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [TTLO_S] = {
>> >> +               .start  = TRIZEPS6_CPLD_TTLO_PHYS,
>> >> +               .end    = TRIZEPS6_CPLD_TTLO_PHYS+1,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +       [TTLO_R] = {
>> >> +               .start  = TRIZEPS6_CPLD_TTLO_PHYS+2,
>> >> +               .end    = TRIZEPS6_CPLD_TTLO_PHYS+3,
>> >> +               .flags  = IORESOURCE_MEM,
>> >> +       },
>> >> +};
>> >> +
>> >> +static int tri6_cpld_platdata = 1;
>> >> +
>> >> +static struct platform_device cpld_device = {
>> >> +       .name           = "trizeps6-cpld",
>> >> +       .id             = -1,
>> >> +       .num_resources  = ARRAY_SIZE(tri6_cpld_resources),
>> >> +       .resource       = tri6_cpld_resources,
>> >> +       .dev            = {
>> >> +               .platform_data = &tri6_cpld_platdata,
>> >> +       }
>> >> +};
>> >> +
>> >> +
>> >>
>> +/******************************************************************************
>> >> + * Audio and Touchscreen
>> >> +
>> >>
>> ******************************************************************************/
>> >> +
>> >> +static struct ucb1400_pdata trizeps6_ucb1400_pdata = {
>> >> +       .irq            =  gpio_to_irq(trizeps6_GPIO_CODEC_IRQ),
>> >> +};
>> >> +
>> >> +static struct pxa2xx_audio_ops_t trizeps6_ac97_pdata = {
>> >> +       .codec_pdata    = { &trizeps6_ucb1400_pdata, },
>> >> +};
>> >> +
>> >> +static struct platform_device trizeps6_ucb1400_device = {
>> >> +       .name           = "ucb1400_core",
>> >> +       .id             = -1,
>> >> +       .dev            = {
>> >> +               .platform_data = &trizeps6_ucb1400_pdata,
>> >> +       },
>> >> +};
>> >> +
>> >> +static void __init trizeps6_ts_init(void)
>> >> +{
>> >> +       pxa168_add_ac97(&trizeps6_ac97_pdata);
>> >> +       platform_device_register(&trizeps6_ucb1400_device);
>> >> +}
>> >> +
>> >> +void trizeps6_ac97_acreset(int i)
>> >> +{      unsigned short value;
>> >> +
>> >> +       if (i == 1) {
>> >> +
>> >> +               value = trizeps6_cpld_readw(CTRL_S);
>> >> +               trizeps6_cpld_writew(CTRL_S, value |
>> CPLD_CONTROL_CODEC);
>> >> +       }
>> >> +       if (!i) {
>> >> +               value = trizeps6_cpld_readw(CTRL_R);
>> >> +               trizeps6_cpld_writew(CTRL_R, value |
>> CPLD_CONTROL_CODEC);
>> >> +       }
>> >> +}
>> >> +
>> >>
>> +/******************************************************************************
>> >> + * Ethernet
>> >> +
>> >>
>> ******************************************************************************/
>> >> +static int trizeps6_eth_init(void)
>> >> +{
>> >> +       unsigned short value;
>> >> +
>> >> +       value = trizeps6_cpld_readw(CTRL_R);
>> >> +       trizeps6_cpld_writew(CTRL_R, value | CPLD_CONTROL_ETHPHY);
>> >> +       return 0;
>> >> +
>> >> +}
>> >> +
>> >> +static struct pxa168_eth_platform_data trizeps6_eth_data = {
>> >> +       .phy_addr       = 0x1f,
>> >> +       .port_number = 0,
>> >> +       .init           = trizeps6_eth_init,
>> >> +};
>> >> +
>> >>
>> +/******************************************************************************
>> >> + * NAND
>> >> +
>> >>
>> ******************************************************************************/
>> >> +static struct pxa3xx_nand_timing stnand02gw3b2d_timing = {
>> >> +       .tCH    = 10,
>> >> +       .tCS    = 40,
>> >> +       .tWH    = 20,
>> >> +       .tWP    = 24,
>> >> +       .tRH    = 20,
>> >> +       .tRP    = 24,
>> >> +       .tR         = 50000,
>> >> +       .tWHR   = 120,
>> >> +       .tAR    = 20,
>> >> +
>> >> +};
>> >> +
>> >> +static struct pxa3xx_nand_cmdset largepage_cmdset = {
>> >> +       .read1          = 0x3000,
>> >> +       .read2          = 0x0050,
>> >> +       .program        = 0x1080,
>> >> +       .read_status    = 0x0070,
>> >> +       .read_id        = 0x0090,
>> >> +       .erase          = 0xD060,
>> >> +       .reset          = 0x00FF,
>> >> +       .lock           = 0x002A,
>> >> +       .unlock         = 0x2423,
>> >> +       .lock_status    = 0x007A,
>> >> +};
>> >> +
>> >> +static struct pxa3xx_nand_flash trizeps6_flashes[] = {
>> >> +       {
>> >> +               .timing = &stnand02gw3b2d_timing,
>> >> +               .cmdset = &largepage_cmdset,
>> >> +               .page_per_block = 64,
>> >> +               .page_size      = 2048,
>> >> +               .flash_width    = 8,
>> >> +               .dfc_width      = 8,
>> >> +               .num_blocks     = 2048,
>> >> +               .chip_id        = 0xda20,
>> >> +       },
>> >> +};
>> >> +
>> >> +
>> >> +static struct mtd_partition trizeps6_nand_partitions[] = {
>> >> +       {
>> >> +               .name           = "bootloader",
>> >> +               .offset         = 0,
>> >> +               .size           = SZ_16M,
>> >> +               .mask_flags     = MTD_WRITEABLE,
>> >> +       }, {
>> >> +               .name           = "reserved",
>> >> +               .offset         = MTDPART_OFS_APPEND,
>> >> +               .size           = SZ_128K,
>> >> +               .mask_flags     = MTD_WRITEABLE,
>> >> +       }, {
>> >> +               .name           = "kernel",
>> >> +               .offset         = MTDPART_OFS_APPEND,
>> >> +               .size           = (2*SZ_2M + SZ_1M),
>> >> +               .mask_flags     = 0,
>> >> +       }, {
>> >> +               .name           = "filesystem",
>> >> +               .offset         = MTDPART_OFS_APPEND,
>> >> +               .size = (SZ_256M - 3*SZ_8M),
>> >> +               .mask_flags     = 0,
>> >> +       }
>> >> +};
>> >> +
>> >> +static struct pxa3xx_nand_platform_data trizeps6_nand_info = {
>> >> +       .enable_arbiter = 1,
>> >> +       .parts          = trizeps6_nand_partitions,
>> >> +       .nr_parts       = ARRAY_SIZE(trizeps6_nand_partitions),
>> >> +       .flash      = trizeps6_flashes,
>> >> +       .num_flash  = ARRAY_SIZE(trizeps6_flashes),
>> >> +       .keep_config = 0
>> >> +};
>> >> +
>> >> +
>> >> +
>> >> +static struct i2c_board_info trizeps6_i2c_devices[]  = {
>> >> +       { I2C_BOARD_INFO("pcf8593", 0x51), },
>> >> +};
>> >> +
>> >> +
>> >>
>> +/******************************************************************************
>> >> + * LCD
>> >> +
>> >>
>> ******************************************************************************/
>> >> +static struct fb_videomode trizeps6_video_modes[] = {
>> >> +       [0] = {
>> >> +               .pixclock       = 39720,
>> >> +               .refresh        = 60,
>> >> +               .xres           = 640,
>> >> +               .yres           = 480,
>> >> +               .hsync_len      = 63,
>> >> +               .left_margin    = 12,
>> >> +               .right_margin   = 12,
>> >> +               .vsync_len      = 4,
>> >> +               .upper_margin   = 32,
>> >> +               .lower_margin   = 10,
>> >> +               .sync           = FB_SYNC_VERT_HIGH_ACT |
>> FB_SYNC_HOR_HIGH_ACT,
>> >> +       },
>> >> +};
>> >> +
>> >> +static struct pxa168fb_mach_info trizeps6_lcd_info = {
>> >> +       .id                     = "Base-trizeps6",
>> >> +       .modes                  = trizeps6_video_modes,
>> >> +       .num_modes              = ARRAY_SIZE(trizeps6_video_modes),
>> >> +       .pix_fmt                = PIX_FMT_RGB565,
>> >> +       .io_pin_allocation_mode = PIN_MODE_DUMB_16_GPIO,
>> >> +       .dumb_mode              = DUMB_MODE_RGB565,
>> >> +       .active                 = 1,
>> >> +       .panel_rbswap           = 1,
>> >> +       .invert_pixclock        = 0,
>> >> +};
>> >> +
>> >> +
>> >> +static struct platform_device *trizeps6_devices[] __initdata = {
>> >> +       &cpld_device,
>> >> +};
>> >> +
>> >> +static void __init trizeps6_init(void)
>> >> +{
>> >> +       mfp_config(ARRAY_AND_SIZE(trizeps6_pin_config));
>> >> +
>> >> +       pxa168_add_uart(1);
>> >> +       pxa168_add_uart(2);
>> >> +#ifdef STUART_SODIMM
>> >> +       pxa168_add_uart(3);
>> >> +#endif
>> >> +       pxa168_add_nand(&trizeps6_nand_info);
>> >> +       platform_add_devices(trizeps6_devices,
>> >> +
>> ARRAY_SIZE(trizeps6_devices));
>> >> +
>> >> +       pxa168_add_fb(&trizeps6_lcd_info);
>> >> +       pxa168_add_mfu(&trizeps6_eth_data);
>> >> +       pxa168_add_twsi(0, NULL,
>> ARRAY_AND_SIZE(trizeps6_i2c_devices));
>> >> +       trizeps6_ts_init();
>> >> +}
>> >> +
>> >> +static void __init trizeps6_map_io(void)
>> >> +{
>> >> +       mmp_map_io();
>> >> +}
>> >> +
>> >> +MACHINE_START(TRIZEPS6, "PXA168-based Keith & Koep Trizeps VI
>> Development
>> >> Module")
>> >> +       /* MAINTAINER("Yupeng Schneider" <
>> yupeng.schneider@googlemail.com>) */
>> >> +       .map_io         = trizeps6_map_io,
>> >> +       .init_irq       = pxa168_init_irq,
>> >> +       .timer          = &pxa168_timer,
>> >> +       .init_machine   = trizeps6_init,
>> >> +MACHINE_END
>> >> +
>> >> +
>> >> diff --git a/arch/arm/mach-mmp/trizeps6_cpld.c
>> >> b/arch/arm/mach-mmp/trizeps6_cpld.c
>> >> index 0000000..2577b0f
>> >> --- /dev/null
>> >> +++ b/arch/arm/mach-mmp/trizeps6_cpld.c
>> >> @@ -0,0 +1,145 @@
>> >> +/*
>> >> + *  linux/arch/arm/mach-mmp/trizeps6_cpld.c
>> >> + *
>> >> + *
>> >> + *  Author:    Yupeng Schneider
>> >> + *  Created:   27 10, 2010
>> >> + *  Copyright: Yupeng Schneider
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>> modify
>> >> + *  it under the terms of the GNU General Public License version 2
>> as +
>> *
>> >>  published by the Free Software Foundation.*/
>> >> +
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/ioport.h>
>> >> +#include <linux/platform_device.h>
>> >> +#include <linux/device.h>
>> >> +#include <linux/module.h>
>> >> +
>> >> +#include <asm/io.h>
>> >> +#include <asm/delay.h>
>> >> +#include <mach/trizeps6.h>
>> >> +#include <mach/trizeps6_cpld.h>
>> >> +
>> >> +struct cpld_info {
>> >> +       struct region {
>> >> +               struct resource *res;
>> >> +               struct resource *req;
>> >> +               void __iomem    *iom;
>> >> +               unsigned short   val;
>> >> +       } addr[7];
>> >> +} cpld_info;
>> >> +
>> >> +static struct cpld_info cpld = { { { 0 } } };
>> >> +
>> >> +inline void trizeps6_cpld_writew(unsigned int reg, unsigned short
>> value) +{
>> >> +       if ((cpld.addr[reg].iom != NULL))
>> >> +               writew(value, cpld.addr[reg].iom);
>> >> +
>> >> +}
>> >> +
>> >> +unsigned short trizeps6_cpld_readw(unsigned int reg)
>> >> +{
>> >> +       short value = 0;
>> >> +       if (reg != HIBE_S || reg != HIBE_R || reg != PWM || reg !=
>> PSET_S || reg
>> >> != PSET_R) {
>> >> +
>> >> +               if ((cpld.addr[reg].iom != NULL))
>> >> +                       value = readw(cpld.addr[reg].iom);
>> >> +       }
>> >> +       return value;
>> >> +}
>> >> +EXPORT_SYMBOL(trizeps6_cpld_readw);
>> >> +
>> >> +static int trizeps6_cpld_probe(struct platform_device *pdev)
>> >> +{
>> >> +       int i;
>> >> +
>> >> +       CPLD_CTRL_R = CPLD_CONTROL_ETHPHY | CPLD_CONTROL_GR;
>> >> +#ifdef STUART_SODIMM
>> >> +       CPLD_FTUR_S = CPLD_FEATURE_UART3_SODIMM;
>> >> +#endif
>> >> +       for (i = CTRL_S; i <= TTLO_R; i++) {
>> >> +               cpld.addr[i].res = platform_get_resource(pdev,
>> IORESOURCE_MEM, i);
>> >> +               if (cpld.addr[i].res == NULL) {
>> >> +                       dev_err(&pdev->dev, "cannot get resource %d
>> area\n", i);
>> >> +                       return -EIO;
>> >> +               }
>> >> +               cpld.addr[i].req =
>> request_mem_region(cpld.addr[i].res->start,
>> >> +                                                       2,
>> pdev->name);
>> >> +               if (cpld.addr[i].req == NULL) {
>> >> +                       dev_err(&pdev->dev, "cannot claim addr area
>> %d\n", i);
>> >> +                       return -EIO;
>> >> +               }
>> >> +               cpld.addr[i].iom = ioremap(cpld.addr[i].res->start,
>> 2);
>> >> +               if (cpld.addr[i].iom == NULL) {
>> >> +                       dev_err(&pdev->dev, "cannot remap addr area
>> %d\n", i);
>> >> +                       return -EIO;
>> >> +               }
>> >> +               switch (i) {
>> >> +               case CTRL_R:
>> >> +                       trizeps6_cpld_writew(CTRL_R, CPLD_CTRL_R);
>> >> +                       break;
>> >> +               case FTUR_S:
>> >> +                       trizeps6_cpld_writew(FTUR_S, CPLD_FTUR_S);
>> >> +                       break;
>> >> +               default:
>> >> +                       ;
>> >> +
>> >> +               }
>> >> +               dev_dbg(&pdev->dev, "mapped region  [%d] %08x ->
>> %p\n",
>> i,
>> >> +                               (int)cpld.addr[i].req->start,
>> cpld.addr[i].iom);
>> >> +       }
>> >> +
>> >> +
>> >> +       return 0;
>> >> +}
>> >> +
>> >> +static int trizeps6_cpld_remove(struct platform_device *pdev)
>> >> +{
>> >> +       dev_dbg(&pdev->dev, "trizeps6_cpld_remove()\n");
>> >> +       return 0;
>> >> +}
>> >> +
>> >> +#ifdef CONFIG_PM
>> >> +static int trizeps6_cpld_suspend(struct platform_device *pdev,
>> >> pm_message_t state)
>> >> +{
>> >> +       return 0;
>> >> +}
>> >> +
>> >> +static int trizeps6_cpld_resume(struct platform_device *pdev)
>> >> +{
>> >> +       return 0;
>> >> +}
>> >> +#endif
>> >> +
>> >> +static struct platform_driver trizeps6_cpld_driver = {
>> >> +       .probe          = trizeps6_cpld_probe,
>> >> +       .remove         = trizeps6_cpld_remove,
>> >> +#ifdef CONFIG_PM
>> >> +       .suspend        = trizeps6_cpld_suspend,
>> >> +       .resume         = trizeps6_cpld_resume,
>> >> +#endif
>> >> +       .driver         = {
>> >> +               .name           = "trizeps6-cpld",
>> >> +       },
>> >> +};
>> >> +
>> >> +
>> >> +static int __devinit trizeps6_cpld_init(void)
>> >> +{
>> >> +
>> >> +       return platform_driver_register(&trizeps6_cpld_driver);
>> >> +}
>> >> +
>> >> +static void trizeps6_cpld_exit(void)
>> >> +{
>> >> +       platform_driver_unregister(&trizeps6_cpld_driver);
>> >> +}
>> >> +
>> >> +arch_initcall(trizeps6_cpld_init);
>> >> +module_exit(trizeps6_cpld_exit);
>> >> +
>> >> +MODULE_AUTHOR("Yupeng Schneider <yupeng.schneider@googlemail.com>");
>> >> +MODULE_DESCRIPTION("Trizeps VI CPLD");
>> >> +MODULE_LICENSE("GPL");
>> >> --
>> >> 1.6.3.3
>> >>
>> >>
>> >>
>> >>
>> >
>>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/