Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754718Ab1BMRPm (ORCPT ); Sun, 13 Feb 2011 12:15:42 -0500 Received: from miraculix-out.informatik.uni-kiel.de ([134.245.248.209]:36246 "EHLO miraculix.informatik.uni-kiel.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754657Ab1BMRPf (ORCPT ); Sun, 13 Feb 2011 12:15:35 -0500 From: Timo von Holtz To: gregkh@suse.de Cc: dilinger@queued.net, akpm@linux-foundation.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, cjb@laptop.org, jon.nettleton@gmail.com, Timo von Holtz Subject: [PATCH] Staging: olpc_dcon: fixed some coding style issues Date: Sun, 13 Feb 2011 18:14:58 +0100 Message-Id: <1297617298-25238-1-git-send-email-tvh@informatik.uni-kiel.de> X-Mailer: git-send-email 1.7.4.1 X-Null-Tag: 0ddedf12cb2ce4ec19d6bb9e775c9853 X-Authenticated-Sender: user tvh from 86.103.150.22 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6424 Lines: 184 Fixed all coding style issues in the files drivers/staging/olpc_dcon/olpc_dcon_xo_1.c drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c Signed-off-by: Timo von Holtz --- drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 2 +- drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 51 +++++++++++++------------- 2 files changed, 26 insertions(+), 27 deletions(-) diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c index 043198d..fab7643 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c @@ -152,7 +152,7 @@ static void dcon_wiggle_xo_1(void) * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and * GPIO15. - */ + */ cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE); diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c index 4f56098..368b838 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c @@ -9,10 +9,10 @@ #include /* Hardware setup on the XO 1.5: - * DCONLOAD connects to + * DCONLOAD connects to * VX855_GPO12 (not nCR_PWOFF) (rev A) * VX855_GPIO1 (not SMBCK2) (rev B) - * DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver + * DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver * DCONSTAT0 connects to VX855_GPI10 (not SSPISDI) * DCONSTAT1 connects to VX855_GPI11 (not nSSPISS) * DCONIRQ connects to VX855_GPIO12 (on B3. on B2, it goes to @@ -21,11 +21,11 @@ * DCONSMBCLK connects to VX855 graphics CRTSPCLK */ -#define TEST_B2 0 // define to test B3 paths on a modded B2 board +#define TEST_B2 0 /* define to test B3 paths on a modded B2 board */ -#define VX855_GENL_PURPOSE_OUTPUT 0x44c // PMIO_Rx4c-4f -#define VX855_GPI_STATUS_CHG 0x450 // PMIO_Rx50 -#define VX855_GPI_SCI_SMI 0x452 // PMIO_Rx52 +#define VX855_GENL_PURPOSE_OUTPUT 0x44c /* PMIO_Rx4c-4f */ +#define VX855_GPI_STATUS_CHG 0x450 /* PMIO_Rx50 */ +#define VX855_GPI_SCI_SMI 0x452 /* PMIO_Rx52 */ #define BIT_GPIO12 0x40 #define PREFIX "OLPC DCON:" @@ -44,7 +44,7 @@ static struct dcon_platform_data dcon_pdata_xo_1_5; static void dcon_clear_irq(void) { if (TEST_B2 || olpc_board_at_least(olpc_board(BOARD_XO_1_5_B3))) { - // irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 + /* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */ outb(BIT_GPIO12, VX855_GPI_STATUS_CHG); } } @@ -54,7 +54,7 @@ static int dcon_was_irq(void) u_int8_t tmp; if (TEST_B2 || olpc_board_at_least(olpc_board(BOARD_XO_1_5_B3))) { - // irq status will appear in PMIO_Rx50[6] on gpio12 + /* irq status will appear in PMIO_Rx50[6] on gpio12 */ tmp = inb(VX855_GPI_STATUS_CHG); return !!(tmp & BIT_GPIO12); } @@ -67,8 +67,8 @@ static int dcon_init_xo_1_5(void) unsigned int irq; u_int8_t tmp; struct pci_dev *pdev; - - + + pdev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855, NULL); if (!pdev) { @@ -94,8 +94,8 @@ static int dcon_init_xo_1_5(void) pci_write_config_byte(pdev, 0xe4, tmp|0x08); if (TEST_B2 || olpc_board_at_least(olpc_board(BOARD_XO_1_5_B3))) { - // clear PMU_RxE1[6] to select SCI on GPIO12 - // clear PMU_RxE0[6] to choose falling edge + /* clear PMU_RxE1[6] to select SCI on GPIO12 */ + /* clear PMU_RxE0[6] to choose falling edge */ pci_read_config_byte(pdev, 0xe1, &tmp); pci_write_config_byte(pdev, 0xe1, tmp & ~BIT_GPIO12); pci_read_config_byte(pdev, 0xe0, &tmp); @@ -103,18 +103,18 @@ static int dcon_init_xo_1_5(void) dcon_clear_irq(); - // set PMIO_Rx52[6] to enable SCI/SMI on gpio12 + /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); } /* Determine the current state of DCONLOAD, likely set by firmware */ if (olpc_board_at_least(olpc_board(BOARD_XO_1_5_B1))) { - // GPIO1 + /* GPIO1 */ dcon_source = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ? DCON_SOURCE_CPU : DCON_SOURCE_DCON; } else { - // GPO12 + /* GPO12 */ dcon_source = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x04000000) ? DCON_SOURCE_CPU : DCON_SOURCE_DCON; } @@ -124,7 +124,8 @@ static int dcon_init_xo_1_5(void) /* we're sharing the IRQ with ACPI */ irq = acpi_gbl_FADT.sci_interrupt; - if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", &dcon_driver)) { + if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, + "DCON", &dcon_driver)) { printk(KERN_ERR PREFIX "DCON (IRQ%d) allocation failed\n", irq); return 1; } @@ -169,7 +170,7 @@ static void dcon_wiggle_xo_1_5(void) * state machine to reset to a (sane) initial state. Mitch Bradley * did some testing and discovered that holding for 16 SMB_CLK cycles * worked a lot more reliably, so that's what we do here. - */ + */ set_i2c_line(1, 1); for (x = 0; x < 16; x++) { @@ -180,31 +181,29 @@ static void dcon_wiggle_xo_1_5(void) } udelay(5); - if (TEST_B2 || olpc_board_at_least(olpc_board(BOARD_XO_1_5_B3))) { - // set PMIO_Rx52[6] to enable SCI/SMI on gpio12 + if (TEST_B2 || olpc_board_at_least(olpc_board(BOARD_XO_1_5_B3))) + /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); - } } static void dcon_set_dconload_xo_1_5(int val) { - if (olpc_board_at_least(olpc_board(BOARD_XO_1_5_B1))) { + if (olpc_board_at_least(olpc_board(BOARD_XO_1_5_B1))) gpio_set_value(VX855_GPIO(1), val); - } else { + else gpio_set_value(VX855_GPO(12), val); - } } static u8 dcon_read_status_xo_1_5(void) { u8 status; - + if (!dcon_was_irq()) return -1; - // i believe this is the same as "inb(0x44b) & 3" + /* i believe this is the same as "inb(0x44b) & 3" */ status = gpio_get_value(VX855_GPI(10)); - status |= gpio_get_value(VX855_GPI(11)) << 1; + status |= gpio_get_value(VX855_GPI(11)) << 1; dcon_clear_irq(); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/