Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755156Ab1BMWLX (ORCPT ); Sun, 13 Feb 2011 17:11:23 -0500 Received: from filtteri1.pp.htv.fi ([213.243.153.184]:57762 "EHLO filtteri1.pp.htv.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752638Ab1BMWLP (ORCPT ); Sun, 13 Feb 2011 17:11:15 -0500 From: Aaro Koskinen To: linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/6] sisfb: XGI Z9 POST Date: Mon, 14 Feb 2011 00:11:22 +0200 Message-Id: <1297635088-13224-1-git-send-email-aaro.koskinen@iki.fi> X-Mailer: git-send-email 1.5.6.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1208 Lines: 28 Here's some patches to get POST working with XGI Z9. I have tested them with the following card: http://www.roboard.com/Files/RB-100/MiniPCI-VGA-Z9s_UM_v1r1A.pdf I'm using the card on an ARM board where the bootloader knows nothing about VGA or VGA BIOS, so having POST support in the kernel driver is mandatory. With these patches the memory size is correct detected, R/W test passes and it's possible to use e.g. framebuffer console. Aaro Koskinen (6): sisfb: POST should fail if R/W test fails sisfb: move XGI POST RAM type detection into a subroutine sisfb: add subroutine for detecting XGI Z9 sisfb: add RAM type detection for XGI Z9 sisfb: move XGI POST DDR2 bootup code into subroutines sisfb: add support for XGI Z9 DDR2 POST drivers/video/sis/sis.h | 1 + drivers/video/sis/sis_main.c | 315 ++++++++++++++++++++++++++++++------------ drivers/video/sis/vgatypes.h | 1 + 3 files changed, 228 insertions(+), 89 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/