Date: Wed, 16 Feb 2011 08:25:14 +0100
From: Dominik Brodowski <linux@dominikbrodowski.net>
To: Pavel Machek <pma@sysgo.com>
Cc: Russell King <rmk@arm.linux.org.uk>,
        kernel list <linux-kernel@vger.kernel.org>, cko@sysgo.com,
        eric.miao@marvell.com, Andrew Morton <akpm@osdl.org>
Subject: Re: pcmcia vs. MECR on pxa25x/sa1111
Message-ID: <20110216072514.GB27029@comet.dominikbrodowski.net>
Mail-Followup-To: Dominik Brodowski <linux@dominikbrodowski.net>,
	Pavel Machek <pma@sysgo.com>, Russell King <rmk@arm.linux.org.uk>,
	kernel list <linux-kernel@vger.kernel.org>, cko@sysgo.com,
	eric.miao@marvell.com, Andrew Morton <akpm@osdl.org>
References: <20110201120303.GA30464@pma.sysgo.com>
 <20110201125921.GA7984@flint.arm.linux.org.uk>
 <20110204080343.GA31740@pma.sysgo.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20110204080343.GA31740@pma.sysgo.com>
User-Agent: Mutt/1.5.20 (2009-06-14)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 867
Lines: 29

Russell,

On Fri, Feb 04, 2011 at 09:03:43AM +0100, Pavel Machek wrote:
> 
> After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by
> sa1111_pcmcia_add(). That unfortunately means that configure_sockets()
> is not called, leading to MECR not being set properly, leading to
> strange crashes.
> 
> Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps
> cleaner solution exists?
> 
> Signed-off-by: Pavel Machek <pma@sysgo.com>
> 
> ---
> 
> Here's updated version. I'd prefer not to do too extensive changes as
> I do not have lubbock nearby.

will you pick this up, or shall I?

Best,
	Dominik

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/