From: Pratheesh Gangadhar <pratheesh@ti.com>
To: davinci-linux-open-source@linux.davincidsp.com
Cc: hjk@hansjkoch.de, gregkh@suse.de, pratheesh@ti.com, amit.chatterjee@ti.com,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] Add PRUSS UIO driver support
Date: Mon, 21 Feb 2011 23:05:13 +0530
Message-Id: <1298309715-21362-1-git-send-email-pratheesh@ti.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1755
Lines: 34

This patch series add support for PRUSS (Programmable Real-time Unit Sub
System) UIO driver in Texas Instruments DA850, AM18xx and OMAPL1-38 processors.
PRUSS is programmable RISC core which can be used to implement Soft IPs
(eg:- DMA, CAN, UART,SmartCard) and Industrial communications data link layers
(eg:- PROFIBUS). UIO driver exposes PRUSS resources like memory and 
interrupts to user space application.PRUSS UIO application API can be used 
to control PRUs in PRUSS, setup PRU INTC, load firmware to PRUs and implement
 IPC between Host processor and PRUs. More information on PRUSS and UIO linux
 user space API available in the links below

http://processors.wiki.ti.com/index.php/Programmable_Realtime_Unit_Subsystem
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader_API_Guide 


Pratheesh Gangadhar (2):
  PRUSS UIO driver support
  Defines DA850/AM18xx/OMAPL1-38 SOC resources used by PRUSS UIO driver

 arch/arm/mach-davinci/board-da850-evm.c    |    4 +
 arch/arm/mach-davinci/da850.c              |   35 ++++
 arch/arm/mach-davinci/devices-da8xx.c      |   73 +++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |    3 +
 drivers/uio/Kconfig                        |    9 +
 drivers/uio/Makefile                       |    1 +
 drivers/uio/uio_pruss.c                    |  231 ++++++++++++++++++++++++++++
 7 files changed, 356 insertions(+), 0 deletions(-)
 create mode 100644 drivers/uio/uio_pruss.c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/