Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752639Ab1BUSoj (ORCPT ); Mon, 21 Feb 2011 13:44:39 -0500 Received: from www.hansjkoch.de ([178.63.77.200]:38892 "EHLO www.hansjkoch.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751889Ab1BUSoi (ORCPT ); Mon, 21 Feb 2011 13:44:38 -0500 Date: Mon, 21 Feb 2011 19:44:32 +0100 From: "Hans J. Koch" To: Pratheesh Gangadhar Cc: davinci-linux-open-source@linux.davincidsp.com, hjk@hansjkoch.de, gregkh@suse.de, amit.chatterjee@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v2 1/2] PRUSS UIO driver support Message-ID: <20110221184432.GA2773@local> References: <1298309715-21362-1-git-send-email-pratheesh@ti.com> <1298309715-21362-2-git-send-email-pratheesh@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1298309715-21362-2-git-send-email-pratheesh@ti.com> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10303 Lines: 325 On Mon, Feb 21, 2011 at 11:05:14PM +0530, Pratheesh Gangadhar wrote: > This patch implements PRUSS (Programmable Real-time Unit Sub System) > UIO driver which exports SOC resources associated with PRUSS like > I/O, memories and IRQs to user space. PRUSS is dual 32-bit RISC > processors which is efficient in performing embedded tasks that > require manipulation of packed memory mapped data structures and > efficient in handling system events that have tight real time > constraints. This driver is currently supported on Texas Instruments > DA850, AM18xx and OMAPL1-38 devices. > For example, PRUSS runs firmware for real-time critical industrial > communication data link layer and communicates with application stack > running in user space via shared memory and IRQs. > > Signed-off-by: Pratheesh Gangadhar Looks much better now. Just some minor issues, see below. Thanks, Hans > --- > drivers/uio/Kconfig | 9 ++ > drivers/uio/Makefile | 1 + > drivers/uio/uio_pruss.c | 231 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 241 insertions(+), 0 deletions(-) > create mode 100644 drivers/uio/uio_pruss.c > > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig > index bb44079..f92f20d 100644 > --- a/drivers/uio/Kconfig > +++ b/drivers/uio/Kconfig > @@ -94,4 +94,13 @@ config UIO_NETX > To compile this driver as a module, choose M here; the module > will be called uio_netx. > > +config UIO_PRUSS > + tristate "Texas Instruments PRUSS driver" > + depends on ARCH_DAVINCI_DA850 > + help > + PRUSS driver for OMAPL138/DA850/AM18XX devices > + PRUSS driver requires user space components It would be nice to mention a link here where these user space components are available. > + To compile this driver as a module, choose M here: the module > + will be called uio_pruss. > + > endif > diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile > index 18fd818..d4dd9a5 100644 > --- a/drivers/uio/Makefile > +++ b/drivers/uio/Makefile > @@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_AEC) += uio_aec.o > obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o > obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o > obj-$(CONFIG_UIO_NETX) += uio_netx.o > +obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o > diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c > new file mode 100644 > index 0000000..b402197 > --- /dev/null > +++ b/drivers/uio/uio_pruss.c > @@ -0,0 +1,231 @@ > +/* > + * Programmable Real-Time Unit Sub System (PRUSS) UIO driver (uio_pruss) > + * > + * This driver exports PRUSS host event out interrupts and PRUSS, L3 RAM, > + * and DDR RAM to user space for applications interacting with PRUSS firmware > + * > + * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define DRV_NAME "pruss" > +#define DRV_VERSION "0.50" > + > +/* > + * Host event IRQ numbers from PRUSS - PRUSS can generate upto 8 interrupt > + * events to AINTC of ARM host processor - which can be used for IPC b/w PRUSS > + * firmware and user space application, async notification from PRU firmware > + * to user space application > + * 3 PRU_EVTOUT0 > + * 4 PRU_EVTOUT1 > + * 5 PRU_EVTOUT2 > + * 6 PRU_EVTOUT3 > + * 7 PRU_EVTOUT4 > + * 8 PRU_EVTOUT5 > + * 9 PRU_EVTOUT6 > + * 10 PRU_EVTOUT7 > +*/ > + > +#define MAX_PRUSS_EVTOUT_INSTANCE 8 > + > +#define PRUSS_INTC_HIPIR 0x4900 > +#define PRUSS_INTC_HIPIR_INTPEND_MASK 0x80000000 > +#define PRUSS_INTC_HIER 0x5500 > + > +struct clk *pruss_clk; > +struct uio_info *info; > +void *ddr_virt_addr; > +dma_addr_t ddr_phy_addr; > + > +static irqreturn_t pruss_handler(int irq, struct uio_info *dev_info) > +{ > + void __iomem *int_enable_reg = dev_info->mem[0].internal_addr > + + PRUSS_INTC_HIER; > + void __iomem *int_status_reg = dev_info->mem[0].internal_addr > + + PRUSS_INTC_HIPIR+((irq-1) << 2); Blank line between variable definitions and code, please. > + /* Is interrupt enabled and active ? */ > + if (!(ioread32(int_enable_reg) & (1<<(irq-1))) && Hmm. I'd prefer blanks around operands, like (1 << (irq - 1))). I won't be too picky about that, noticing that checkpatch.pl doesn't complain. If you want to do me a favor, you can fix it ;-) > + (ioread32(int_status_reg) & PRUSS_INTC_HIPIR_INTPEND_MASK)) > + return IRQ_NONE; > + > + /* Disable interrupt */ > + iowrite32(ioread32(int_enable_reg) & ~(1<<(irq-1)), If you save the return value of the first ioread32(int_enable_reg) in a variable, you don't need the second hardware access. > + int_enable_reg); > + return IRQ_HANDLED; > +} > + > +static void pruss_cleanup(struct platform_device *dev, struct uio_info *info) > +{ > + int count; Blank line between variable definitions and code, please. > + if (info) { > + for (count = 0; count < MAX_PRUSS_EVTOUT_INSTANCE; count++) { > + uio_unregister_device(&info[count]); > + kfree(info[count].name); > + iounmap(info[count].mem[0].internal_addr); > + > + } > + if (ddr_virt_addr) > + dma_free_coherent(&dev->dev, info[0].mem[2].size, > + info[0].mem[2].internal_addr, > + info[0].mem[2].addr); > + kfree(info); > + } > + if (pruss_clk != NULL) > + clk_put(pruss_clk); > +} > + > +static int __devinit pruss_probe(struct platform_device *dev) > +{ > + int ret = -ENODEV, count = 0; > + struct resource *regs_pruram, *regs_l3ram, *regs_ddr; > + char *string; > + > + /* Power on PRU in case its not done as part of boot-loader */ > + pruss_clk = clk_get(&dev->dev, "pruss"); > + if (IS_ERR(pruss_clk)) { > + dev_err(&dev->dev, "Failed to get clock\n"); > + ret = PTR_ERR(pruss_clk); > + return ret; > + } else { > + clk_enable(pruss_clk); > + } > + > + info = kzalloc(sizeof(struct uio_info) * MAX_PRUSS_EVTOUT_INSTANCE, > + GFP_KERNEL); > + if (info == NULL) if (!info) looks better. > + return -ENOMEM; > + > + regs_pruram = platform_get_resource(dev, IORESOURCE_MEM, 0); > + if (!regs_pruram) { > + dev_err(&dev->dev, "No memory resource specified\n"); > + goto out_free; > + } > + > + regs_l3ram = platform_get_resource(dev, IORESOURCE_MEM, 1); > + if (!regs_l3ram) { > + dev_err(&dev->dev, "No memory resource specified\n"); > + goto out_free; > + } > + > + regs_ddr = platform_get_resource(dev, IORESOURCE_MEM, 2); > + if (!regs_ddr) { > + dev_err(&dev->dev, "No memory resource specified\n"); > + goto out_free; > + } > + ddr_virt_addr = > + dma_alloc_coherent(&dev->dev, regs_ddr->end - regs_ddr->start + 1, > + &ddr_phy_addr, GFP_KERNEL | GFP_DMA); > + if (!ddr_virt_addr) { > + dev_err(&dev->dev, "Could not allocate external memory\n"); > + goto out_free; > + } > + > + for (count = 0; count < MAX_PRUSS_EVTOUT_INSTANCE; count++) { > + info[count].mem[0].addr = regs_pruram->start; > + info[count].mem[0].size = > + regs_pruram->end - regs_pruram->start + 1; > + if (!info[count].mem[0].addr || > + !(info[count].mem[0].size - 1)) { > + dev_err(&dev->dev, "Invalid memory resource\n"); > + goto out_free; > + } > + info[count].mem[0].internal_addr = > + ioremap(regs_pruram->start, info[count].mem[0].size); > + if (!info[count].mem[0].internal_addr) { > + dev_err(&dev->dev, > + "Can't remap memory address range\n"); > + goto out_free; > + } > + info[count].mem[0].memtype = UIO_MEM_PHYS; > + > + info[count].mem[1].addr = regs_l3ram->start; > + info[count].mem[1].size = > + regs_l3ram->end - regs_l3ram->start + 1; > + if (!info[count].mem[1].addr || > + !(info[count].mem[1].size - 1)) { > + dev_err(&dev->dev, "Invalid memory resource\n"); > + goto out_free; > + } > + info[count].mem[1].memtype = UIO_MEM_PHYS; > + > + info[count].mem[2].internal_addr = ddr_virt_addr; > + info[count].mem[2].addr = ddr_phy_addr; > + info[count].mem[2].size = regs_ddr->end - regs_ddr->start + 1; > + info[count].mem[2].memtype = UIO_MEM_PHYS; > + > + string = kzalloc(20, GFP_KERNEL); > + sprintf(string, "pruss_evt%d", count); > + info[count].name = string; > + info[count].version = "0.50"; > + > + /* Register PRUSS IRQ lines */ > + info[count].irq = IRQ_DA8XX_EVTOUT0 + count; > + > + info[count].irq_flags = 0; > + info[count].handler = pruss_handler; > + > + ret = uio_register_device(&dev->dev, &info[count]); > + > + if (ret < 0) > + goto out_free; > + } > + > + platform_set_drvdata(dev, info); > + return 0; > + > +out_free: > + pruss_cleanup(dev, info); > + return ret; > +} > + > +static int __devexit pruss_remove(struct platform_device *dev) > +{ > + struct uio_info *info = platform_get_drvdata(dev); Blank line, please. > + pruss_cleanup(dev, info); > + platform_set_drvdata(dev, NULL); > + return 0; > +} > + > +static struct platform_driver pruss_driver = { > + .probe = pruss_probe, > + .remove = __devexit_p(pruss_remove), > + .driver = { > + .name = DRV_NAME, > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init pruss_init_module(void) > +{ > + return platform_driver_register(&pruss_driver); > +} > + > +module_init(pruss_init_module); > + > +static void __exit pruss_exit_module(void) > +{ > + platform_driver_unregister(&pruss_driver); > +} > + > +module_exit(pruss_exit_module); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_VERSION(DRV_VERSION); > +MODULE_AUTHOR("Amit Chatterjee "); > +MODULE_AUTHOR("Pratheesh Gangadhar "); > -- > 1.6.0.6 > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/