Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 11 Jul 2002 22:32:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 11 Jul 2002 22:32:45 -0400 Received: from klaatu.zianet.com ([204.134.124.201]:5264 "HELO zianet.com") by vger.kernel.org with SMTP id ; Thu, 11 Jul 2002 22:32:45 -0400 Message-ID: <3D2E41EB.6040504@zianet.com> Date: Thu, 11 Jul 2002 20:41:47 -0600 From: kwijibo@zianet.com User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.1a+) Gecko/20020709 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Donald Becker CC: Matthew Hall , Kernel , jgarzik@mandrakesoft.com Subject: Re: [PROBLEM] sundance on d-link dfe-580tx References: Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2539 Lines: 73 Just to give some confirmation of the operation of this new driver. I had had the same error messages as Matthew did. I followed the instructions on Donald's site on making the new drivers and it works great now. It found everything correctly with the following output: sundance.c:v1.07 7/3/2002 Written by Donald Becker http://www.scyld.com/network/sundance.html eth0: OEM Sundance Technology ST201 at 0xdc00, 00:05:5d:e6:2b:19, IRQ 11. eth0: MII PHY found at address 0, status 0x782d advertising 01e1. eth0: MII PHY found at address 1, status 0x782d advertising 01e1. eth1: OEM Sundance Technology ST201 at 0xd880, 00:05:5d:e6:2b:1a, IRQ 10. eth1: MII PHY found at address 0, status 0x7809 advertising 01e1. eth1: MII PHY found at address 1, status 0x7809 advertising 01e1. eth2: OEM Sundance Technology ST201 at 0xd800, 00:05:5d:e6:2b:1b, IRQ 9. eth2: MII PHY found at address 0, status 0x7809 advertising 01e1. eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. eth3: OEM Sundance Technology ST201 at 0xd480, 00:05:5d:e6:2b:1c, IRQ 11. eth3: MII PHY found at address 0, status 0x7809 advertising 01e1. eth3: MII PHY found at address 1, status 0x7809 advertising 01e1. I am now sending this message over it. Any idea when this will be merged into mainstream kernel? Thanks, Steven Donald Becker wrote: >On 11 Jun 2002, Matthew Hall wrote: > > > >>To: Kernel >>Cc: becker@scyld.com, jgarzik@mandrakesoft.com >> >> >... > > >>I have been testing the D-Link DFE-580TX Quad channel server card (4 >>port nic), on kernel 2.4.18 with little success. >> >>Attached are the appropriate results of dmesg, ifconfig, lspci and >>modules.conf; aswell as the results of the pci-testing tool found on >>scyld.com, however the card does not support mii testing, claiming to >>have no MII transceiver. >> >> > >Please provide the full detection message. > >It appears that you are using a driver that doesn't correctly read the >EEPROM, and has additional problems. Try a current driver from > http://www.scyld.com/network/ethercard.html > ftp://www.scyld.com/pub/network/sundance.c > http://www.scyld.com/network/updates.html > >and run diagnostic program from > http://www.scyld.com/diag/index.html > > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/