Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932066Ab1CLU0F (ORCPT ); Sat, 12 Mar 2011 15:26:05 -0500 Received: from mail-iy0-f174.google.com ([209.85.210.174]:42964 "EHLO mail-iy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755668Ab1CLUXs (ORCPT ); Sat, 12 Mar 2011 15:23:48 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=SOy7em68oeVyp3zOVnKLgSczGqCNl0nkRIELjaL0ZDOUIgvPChywuznXLcOXDt+Tv2 u5xutP+cX03My0Qn+5qCMJ9wJRP25jMlw/HgCmqn7/ZJ/qdtwg89S5VRb4Cj2bWu3Wi/ 47FF5zpAzaCQGcJ9Icpw8tkRSlxY0BCjA6l0Q= From: dirk.brandewie@gmail.com To: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: Dirk Brandewie Subject: [PATCH 05/13] i2c-designware: split of i2c-designware.c into core and bus specific parts Date: Sat, 12 Mar 2011 12:23:19 -0800 Message-Id: <1299961407-26852-6-git-send-email-dirk.brandewie@gmail.com> X-Mailer: git-send-email 1.7.3.4 In-Reply-To: <1299961407-26852-1-git-send-email-dirk.brandewie@gmail.com> References: <1299961407-26852-1-git-send-email-dirk.brandewie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28254 Lines: 931 From: Dirk Brandewie This patch splits i2c-designware.c into three pieces: i2c-designware-core.c, contains the code that interacts directly with the core. i2c-designware-platdrv.c, contains the code specific to the platform driver using the core. i2c-designware-core.h contains the definitions and declareations shared by i2c-designware-core.c and i2c-designware-platdrv.c. This patch is the first in a set to allow multiple instances of the designware I2C core in the system. Signed-off-by: Dirk Brandewie --- drivers/i2c/busses/Kconfig | 6 +- drivers/i2c/busses/Makefile | 3 +- .../{i2c-designware.c => i2c-designware-core.c} | 353 +------------------- drivers/i2c/busses/i2c-designware-core.h | 194 +++++++++++ drivers/i2c/busses/i2c-designware-platdrv.c | 199 +++++++++++ 5 files changed, 412 insertions(+), 343 deletions(-) rename drivers/i2c/busses/{i2c-designware.c => i2c-designware-core.c} (60%) create mode 100644 drivers/i2c/busses/i2c-designware-core.h create mode 100644 drivers/i2c/busses/i2c-designware-platdrv.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 113505a..35b5e6b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -347,15 +347,15 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci -config I2C_DESIGNWARE - tristate "Synopsys DesignWare" +config I2C_DESIGNWARE_PLATFORM + tristate "Synopsys DesignWare Platfrom" depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. This driver can also be built as a module. If so, the module - will be called i2c-designware. + will be called i2c-designware-platform. config I2C_GPIO tristate "GPIO-based bitbanging I2C" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 9d2d0ec..effbcc7 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -33,7 +33,8 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o -obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o +obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o +i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware-core.c similarity index 60% rename from drivers/i2c/busses/i2c-designware.c rename to drivers/i2c/busses/i2c-designware-core.c index 85517c5..432bfdd 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -25,127 +25,13 @@ * ---------------------------------------------------------------------------- * */ -#include -#include -#include -#include #include #include -#include #include +#include #include -#include #include -#include -#include - -/* - * Registers offset - */ -#define DW_IC_CON 0x0 -#define DW_IC_TAR 0x4 -#define DW_IC_DATA_CMD 0x10 -#define DW_IC_SS_SCL_HCNT 0x14 -#define DW_IC_SS_SCL_LCNT 0x18 -#define DW_IC_FS_SCL_HCNT 0x1c -#define DW_IC_FS_SCL_LCNT 0x20 -#define DW_IC_INTR_STAT 0x2c -#define DW_IC_INTR_MASK 0x30 -#define DW_IC_RAW_INTR_STAT 0x34 -#define DW_IC_RX_TL 0x38 -#define DW_IC_TX_TL 0x3c -#define DW_IC_CLR_INTR 0x40 -#define DW_IC_CLR_RX_UNDER 0x44 -#define DW_IC_CLR_RX_OVER 0x48 -#define DW_IC_CLR_TX_OVER 0x4c -#define DW_IC_CLR_RD_REQ 0x50 -#define DW_IC_CLR_TX_ABRT 0x54 -#define DW_IC_CLR_RX_DONE 0x58 -#define DW_IC_CLR_ACTIVITY 0x5c -#define DW_IC_CLR_STOP_DET 0x60 -#define DW_IC_CLR_START_DET 0x64 -#define DW_IC_CLR_GEN_CALL 0x68 -#define DW_IC_ENABLE 0x6c -#define DW_IC_STATUS 0x70 -#define DW_IC_TXFLR 0x74 -#define DW_IC_RXFLR 0x78 -#define DW_IC_COMP_PARAM_1 0xf4 -#define DW_IC_COMP_TYPE 0xfc -#define DW_IC_TX_ABRT_SOURCE 0x80 - -#define DW_IC_CON_MASTER 0x1 -#define DW_IC_CON_SPEED_STD 0x2 -#define DW_IC_CON_SPEED_FAST 0x4 -#define DW_IC_CON_10BITADDR_MASTER 0x10 -#define DW_IC_CON_RESTART_EN 0x20 -#define DW_IC_CON_SLAVE_DISABLE 0x40 - -#define DW_IC_INTR_RX_UNDER 0x001 -#define DW_IC_INTR_RX_OVER 0x002 -#define DW_IC_INTR_RX_FULL 0x004 -#define DW_IC_INTR_TX_OVER 0x008 -#define DW_IC_INTR_TX_EMPTY 0x010 -#define DW_IC_INTR_RD_REQ 0x020 -#define DW_IC_INTR_TX_ABRT 0x040 -#define DW_IC_INTR_RX_DONE 0x080 -#define DW_IC_INTR_ACTIVITY 0x100 -#define DW_IC_INTR_STOP_DET 0x200 -#define DW_IC_INTR_START_DET 0x400 -#define DW_IC_INTR_GEN_CALL 0x800 - -#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_EMPTY | \ - DW_IC_INTR_TX_ABRT | \ - DW_IC_INTR_STOP_DET) - -#define DW_IC_STATUS_ACTIVITY 0x1 - -#define DW_IC_ERR_TX_ABRT 0x1 - -/* - * status codes - */ -#define STATUS_IDLE 0x0 -#define STATUS_WRITE_IN_PROGRESS 0x1 -#define STATUS_READ_IN_PROGRESS 0x2 - -#define TIMEOUT 20 /* ms */ - -/* - * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register - * - * only expected abort codes are listed here - * refer to the datasheet for the full list - */ -#define ABRT_7B_ADDR_NOACK 0 -#define ABRT_10ADDR1_NOACK 1 -#define ABRT_10ADDR2_NOACK 2 -#define ABRT_TXDATA_NOACK 3 -#define ABRT_GCALL_NOACK 4 -#define ABRT_GCALL_READ 5 -#define ABRT_SBYTE_ACKDET 7 -#define ABRT_SBYTE_NORSTRT 9 -#define ABRT_10B_RD_NORSTRT 10 -#define ABRT_MASTER_DIS 11 -#define ARB_LOST 12 - -#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) -#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) -#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) -#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) -#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) -#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) -#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) -#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) -#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) -#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) -#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) - -#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ - DW_IC_TX_ABRT_10ADDR1_NOACK | \ - DW_IC_TX_ABRT_10ADDR2_NOACK | \ - DW_IC_TX_ABRT_TXDATA_NOACK | \ - DW_IC_TX_ABRT_GCALL_NOACK) +#include "i2c-designware-core.h" static char *abort_sources[] = { [ABRT_7B_ADDR_NOACK] = @@ -172,59 +58,7 @@ static char *abort_sources[] = { "lost arbitration", }; -/** - * struct dw_i2c_dev - private i2c-designware data - * @dev: driver model device node - * @base: IO registers pointer - * @cmd_complete: tx completion indicator - * @lock: protect this struct and IO registers - * @clk: input reference clock - * @cmd_err: run time hadware error code - * @msgs: points to an array of messages currently being transfered - * @msgs_num: the number of elements in msgs - * @msg_write_idx: the element index of the current tx message in the msgs - * array - * @tx_buf_len: the length of the current tx buffer - * @tx_buf: the current tx buffer - * @msg_read_idx: the element index of the current rx message in the msgs - * array - * @rx_buf_len: the length of the current rx buffer - * @rx_buf: the current rx buffer - * @msg_err: error status of the current transfer - * @status: i2c master status, one of STATUS_* - * @abort_source: copy of the TX_ABRT_SOURCE register - * @irq: interrupt number for the i2c master - * @swab: true if the instantiated IP is of different endianess - * @adapter: i2c subsystem adapter node - * @tx_fifo_depth: depth of the hardware tx fifo - * @rx_fifo_depth: depth of the hardware rx fifo - */ -struct dw_i2c_dev { - struct device *dev; - void __iomem *base; - struct completion cmd_complete; - struct mutex lock; - struct clk *clk; - int cmd_err; - struct i2c_msg *msgs; - int msgs_num; - int msg_write_idx; - u32 tx_buf_len; - u8 *tx_buf; - int msg_read_idx; - u32 rx_buf_len; - u8 *rx_buf; - int msg_err; - unsigned int status; - u32 abort_source; - int irq; - int swab; - struct i2c_adapter adapter; - unsigned int tx_fifo_depth; - unsigned int rx_fifo_depth; -}; - -static u32 dw_readl(struct dw_i2c_dev *dev, int offset) +u32 dw_readl(struct dw_i2c_dev *dev, int offset) { u32 value = readl(dev->base + offset); @@ -234,7 +68,7 @@ static u32 dw_readl(struct dw_i2c_dev *dev, int offset) return value; } -static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) { if (dev->swab) b = swab32(b); @@ -305,7 +139,7 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) * This function is called during I2C init function, and in case of timeout at * run time. */ -static int i2c_dw_init(struct dw_i2c_dev *dev) +int i2c_dw_init(struct dw_i2c_dev *dev) { u32 input_clock_khz = clk_get_rate(dev->clk) / 1000; u32 ic_con, hcnt, lcnt; @@ -419,7 +253,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) * messages into the tx buffer. Even if the size of i2c_msg data is * longer than the size of the tx buffer, it handles everything. */ -static void +void i2c_dw_xfer_msg(struct dw_i2c_dev *dev) { struct i2c_msg *msgs = dev->msgs; @@ -427,7 +261,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) int tx_limit, rx_limit; u32 addr = msgs[dev->msg_write_idx].addr; u32 buf_len = dev->tx_buf_len; - u8 *buf = dev->tx_buf;; + u8 *buf = dev->tx_buf; intr_mask = DW_IC_INTR_DEFAULT_MASK; @@ -490,7 +324,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) if (dev->msg_err) intr_mask = 0; - dw_writel(dev, intr_mask, DW_IC_INTR_MASK); + dw_writel(dev, intr_mask, DW_IC_INTR_MASK); } static void @@ -555,7 +389,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) /* * Prepare controller for a transaction and call i2c_dw_xfer_msg */ -static int +int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); @@ -618,7 +452,7 @@ done: return ret; } -static u32 i2c_dw_func(struct i2c_adapter *adap) +u32 i2c_dw_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | @@ -638,9 +472,9 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * in the IC_RAW_INTR_STAT register. * * That is, - * stat = readl(IC_INTR_STAT); + * stat = dw_readl(IC_INTR_STAT); * equals to, - * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK); + * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK); * * The raw version might be useful for debugging purposes. */ @@ -649,7 +483,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) /* * Do not use the IC_CLR_INTR register to clear interrupts, or * you'll miss some interrupts, triggered during the period from - * readl(IC_INTR_STAT) to readl(IC_CLR_INTR). + * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR). * * Instead, use the separately-prepared IC_CLR_* registers. */ @@ -687,7 +521,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * Interrupt service routine. This gets called whenever an I2C interrupt * occurs. */ -static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) { struct dw_i2c_dev *dev = dev_id; u32 stat; @@ -726,162 +560,3 @@ tx_aborted: return IRQ_HANDLED; } -static struct i2c_algorithm i2c_dw_algo = { - .master_xfer = i2c_dw_xfer, - .functionality = i2c_dw_func, -}; - -static int __devinit dw_i2c_probe(struct platform_device *pdev) -{ - struct dw_i2c_dev *dev; - struct i2c_adapter *adap; - struct resource *mem, *ioarea; - int irq, r; - u32 reg; - - /* NOTE: driver uses the static register mapping */ - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq resource?\n"); - return irq; /* -ENXIO */ - } - - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "I2C region already claimed\n"); - return -EBUSY; - } - - dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL); - if (!dev) { - r = -ENOMEM; - goto err_release_region; - } - - init_completion(&dev->cmd_complete); - mutex_init(&dev->lock); - dev->dev = get_device(&pdev->dev); - dev->irq = irq; - platform_set_drvdata(pdev, dev); - - dev->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(dev->clk)) { - r = -ENODEV; - goto err_free_mem; - } - clk_enable(dev->clk); - - dev->base = ioremap(mem->start, resource_size(mem)); - if (dev->base == NULL) { - dev_err(&pdev->dev, "failure mapping io resources\n"); - r = -EBUSY; - goto err_unuse_clocks; - } - - r = i2c_dw_init(dev); - if (r) - goto err_unuse_clocks; - - reg = dw_readl(dev, DW_IC_COMP_PARAM_1); - dev->tx_fifo_depth = ((reg >> 16) & 0xff) + 1; - dev->rx_fifo_depth = ((reg >> 8) & 0xff) + 1; - - - dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */ - r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev); - if (r) { - dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); - goto err_iounmap; - } - - adap = &dev->adapter; - i2c_set_adapdata(adap, dev); - adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON; - strlcpy(adap->name, "Synopsys DesignWare I2C adapter", - sizeof(adap->name)); - adap->algo = &i2c_dw_algo; - adap->dev.parent = &pdev->dev; - - adap->nr = pdev->id; - r = i2c_add_numbered_adapter(adap); - if (r) { - dev_err(&pdev->dev, "failure adding adapter\n"); - goto err_free_irq; - } - - return 0; - -err_free_irq: - free_irq(dev->irq, dev); -err_iounmap: - iounmap(dev->base); -err_unuse_clocks: - clk_disable(dev->clk); - clk_put(dev->clk); - dev->clk = NULL; -err_free_mem: - platform_set_drvdata(pdev, NULL); - put_device(&pdev->dev); - kfree(dev); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); - - return r; -} - -static int __devexit dw_i2c_remove(struct platform_device *pdev) -{ - struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - struct resource *mem; - - platform_set_drvdata(pdev, NULL); - i2c_del_adapter(&dev->adapter); - put_device(&pdev->dev); - - clk_disable(dev->clk); - clk_put(dev->clk); - dev->clk = NULL; - - dw_writel(dev, 0, DW_IC_ENABLE); - free_irq(dev->irq, dev); - kfree(dev); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:i2c_designware"); - -static struct platform_driver dw_i2c_driver = { - .remove = __devexit_p(dw_i2c_remove), - .driver = { - .name = "i2c_designware", - .owner = THIS_MODULE, - }, -}; - -static int __init dw_i2c_init_driver(void) -{ - return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); -} -module_init(dw_i2c_init_driver); - -static void __exit dw_i2c_exit_driver(void) -{ - platform_driver_unregister(&dw_i2c_driver); -} -module_exit(dw_i2c_exit_driver); - -MODULE_AUTHOR("Baruch Siach "); -MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h new file mode 100644 index 0000000..4e37031 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -0,0 +1,194 @@ +/* + * Synopsys DesignWare I2C adapter driver (master only). + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + * + */ + +/* + * Registers offset + */ +#define DW_IC_CON 0x0 +#define DW_IC_TAR 0x4 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 + +#define DW_IC_CON_MASTER 0x1 +#define DW_IC_CON_SPEED_STD 0x2 +#define DW_IC_CON_SPEED_FAST 0x4 +#define DW_IC_CON_10BITADDR_MASTER 0x10 +#define DW_IC_CON_RESTART_EN 0x20 +#define DW_IC_CON_SLAVE_DISABLE 0x40 + +#define DW_IC_INTR_RX_UNDER 0x001 +#define DW_IC_INTR_RX_OVER 0x002 +#define DW_IC_INTR_RX_FULL 0x004 +#define DW_IC_INTR_TX_OVER 0x008 +#define DW_IC_INTR_TX_EMPTY 0x010 +#define DW_IC_INTR_RD_REQ 0x020 +#define DW_IC_INTR_TX_ABRT 0x040 +#define DW_IC_INTR_RX_DONE 0x080 +#define DW_IC_INTR_ACTIVITY 0x100 +#define DW_IC_INTR_STOP_DET 0x200 +#define DW_IC_INTR_START_DET 0x400 +#define DW_IC_INTR_GEN_CALL 0x800 + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_EMPTY | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) + +#define DW_IC_STATUS_ACTIVITY 0x1 + +#define DW_IC_ERR_TX_ABRT 0x1 + +/* + * status codes + */ +#define STATUS_IDLE 0x0 +#define STATUS_WRITE_IN_PROGRESS 0x1 +#define STATUS_READ_IN_PROGRESS 0x2 + +#define TIMEOUT 20 /* ms */ + +/* + * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * + * only expected abort codes are listed here + * refer to the datasheet for the full list + */ +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 + +#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) +#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) +#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) +#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) +#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) +#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) +#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) +#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) +#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) +#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) + +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) +/** + * struct dw_i2c_dev - private i2c-designware data + * @dev: driver model device node + * @base: IO registers pointer + * @cmd_complete: tx completion indicator + * @lock: protect this struct and IO registers + * @clk: input reference clock + * @cmd_err: run time hadware error code + * @msgs: points to an array of messages currently being transfered + * @msgs_num: the number of elements in msgs + * @msg_write_idx: the element index of the current tx message in the msgs + * array + * @tx_buf_len: the length of the current tx buffer + * @tx_buf: the current tx buffer + * @msg_read_idx: the element index of the current rx message in the msgs + * array + * @rx_buf_len: the length of the current rx buffer + * @rx_buf: the current rx buffer + * @msg_err: error status of the current transfer + * @status: i2c master status, one of STATUS_* + * @abort_source: copy of the TX_ABRT_SOURCE register + * @irq: interrupt number for the i2c master + * @adapter: i2c subsystem adapter node + * @tx_fifo_depth: depth of the hardware tx fifo + * @rx_fifo_depth: depth of the hardware rx fifo + */ +struct dw_i2c_dev { + struct device *dev; + void __iomem *base; + struct completion cmd_complete; + struct mutex lock; + struct clk *clk; + int cmd_err; + struct i2c_msg *msgs; + int msgs_num; + int msg_write_idx; + u32 tx_buf_len; + u8 *tx_buf; + int msg_read_idx; + u32 rx_buf_len; + u8 *rx_buf; + int msg_err; + unsigned int status; + u32 abort_source; + int irq; + int swab; + struct i2c_adapter adapter; + unsigned int tx_fifo_depth; + unsigned int rx_fifo_depth; +}; + +extern u32 dw_readl(struct dw_i2c_dev *dev, int offset); +extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); +extern int i2c_dw_init(struct dw_i2c_dev *dev); +extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num); +extern u32 i2c_dw_func(struct i2c_adapter *adap); +extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c new file mode 100644 index 0000000..9d10ae8 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -0,0 +1,199 @@ +/* + * Synopsys DesignWare I2C adapter driver (master only). + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "i2c-designware-core.h" + +static struct i2c_algorithm i2c_dw_algo = { + .master_xfer = i2c_dw_xfer, + .functionality = i2c_dw_func, +}; + +static int __devinit dw_i2c_probe(struct platform_device *pdev) +{ + struct dw_i2c_dev *dev; + struct i2c_adapter *adap; + struct resource *mem, *ioarea; + int irq, r; + + /* NOTE: driver uses the static register mapping */ + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + return irq; /* -ENXIO */ + } + + ioarea = request_mem_region(mem->start, resource_size(mem), + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "I2C region already claimed\n"); + return -EBUSY; + } + + dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL); + if (!dev) { + r = -ENOMEM; + goto err_release_region; + } + + init_completion(&dev->cmd_complete); + mutex_init(&dev->lock); + dev->dev = get_device(&pdev->dev); + dev->irq = irq; + platform_set_drvdata(pdev, dev); + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) { + r = -ENODEV; + goto err_free_mem; + } + clk_enable(dev->clk); + + dev->base = ioremap(mem->start, resource_size(mem)); + if (dev->base == NULL) { + dev_err(&pdev->dev, "failure mapping io resources\n"); + r = -EBUSY; + goto err_unuse_clocks; + } + { + u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1); + + dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; + dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; + } + r = i2c_dw_init(dev); + if (r) + goto err_iounmap; + + dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */ + r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev); + if (r) { + dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); + goto err_iounmap; + } + + adap = &dev->adapter; + i2c_set_adapdata(adap, dev); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON; + strlcpy(adap->name, "Synopsys DesignWare I2C adapter", + sizeof(adap->name)); + adap->algo = &i2c_dw_algo; + adap->dev.parent = &pdev->dev; + + adap->nr = pdev->id; + r = i2c_add_numbered_adapter(adap); + if (r) { + dev_err(&pdev->dev, "failure adding adapter\n"); + goto err_free_irq; + } + + return 0; + +err_free_irq: + free_irq(dev->irq, dev); +err_iounmap: + iounmap(dev->base); +err_unuse_clocks: + clk_disable(dev->clk); + clk_put(dev->clk); + dev->clk = NULL; +err_free_mem: + platform_set_drvdata(pdev, NULL); + put_device(&pdev->dev); + kfree(dev); +err_release_region: + release_mem_region(mem->start, resource_size(mem)); + + return r; +} + +static int __devexit dw_i2c_remove(struct platform_device *pdev) +{ + struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + struct resource *mem; + + platform_set_drvdata(pdev, NULL); + i2c_del_adapter(&dev->adapter); + put_device(&pdev->dev); + + clk_disable(dev->clk); + clk_put(dev->clk); + dev->clk = NULL; + + dw_writel(dev, 0, DW_IC_ENABLE); + free_irq(dev->irq, dev); + kfree(dev); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:i2c_designware"); + +static struct platform_driver dw_i2c_driver = { + .remove = __devexit_p(dw_i2c_remove), + .driver = { + .name = "i2c_designware", + .owner = THIS_MODULE, + }, +}; + +static int __init dw_i2c_init_driver(void) +{ + return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); +} +module_init(dw_i2c_init_driver); + +static void __exit dw_i2c_exit_driver(void) +{ + platform_driver_unregister(&dw_i2c_driver); +} +module_exit(dw_i2c_exit_driver); + +MODULE_AUTHOR("Baruch Siach "); +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter"); +MODULE_LICENSE("GPL"); -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/