Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754325Ab1CNXrp (ORCPT ); Mon, 14 Mar 2011 19:47:45 -0400 Received: from mga02.intel.com ([134.134.136.20]:46573 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753316Ab1CNXrl (ORCPT ); Mon, 14 Mar 2011 19:47:41 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.62,319,1297065600"; d="txt'?scan'208";a="720136279" Date: Mon, 14 Mar 2011 16:47:25 -0700 From: Sarah Sharp To: "Rafael J. Wysocki" Cc: linux-pci@vger.kernel.org, LKML , Jesse Barnes , ACPI Devel Mailing List , Len Brown , Matthew Garrett Subject: Re: [RFT][PATCH] PCI / ACPI: Do not require MSI support for PCIe native features Message-ID: <20110314234725.GA4145@xanatos> References: <201103052254.48515.rjw@sisk.pl> <201103142102.11164.rjw@sisk.pl> <20110314201909.GA4937@xanatos> <201103142137.41607.rjw@sisk.pl> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="UugvWAfsgieZRqgk" Content-Disposition: inline In-Reply-To: <201103142137.41607.rjw@sisk.pl> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 81128 Lines: 1265 --UugvWAfsgieZRqgk Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Mar 14, 2011 at 09:37:41PM +0100, Rafael J. Wysocki wrote: > On Monday, March 14, 2011, Sarah Sharp wrote: > > On Mon, Mar 14, 2011 at 09:02:11PM +0100, Rafael J. Wysocki wrote: > > > On Monday, March 14, 2011, Sarah Sharp wrote: > > > > Hi Rafael, > > > > > > > > I applied this patch, on top of this patch: > > > > PCI/ACPI: Report ASPM support to BIOS if not disabled from command line > > > > > > > > Unfortunately, the Express Card still doesn't show up. The trace looks > > > > slightly different, but the irq still gets disabled. dmesg is attached. > > > > > > Hmm. It looks like, for some reason, the check against > > > pcie_aspm_support_enabled() returns false on your system. Do you have > > > ASPM enabled in .config? > > > > My .config is attached. Looks like CONFIG_PCIEASPM=y. > > Does it help if you replace "pcie_aspm_support_enabled()" with "true" in > drivers/acpi/pci_root.c:acpi_pci_root_add() ? No, it doesn't. dmesg is attached. Sarah Sharp --UugvWAfsgieZRqgk Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-rc8+ (sarah@xanatos) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #776 SMP PREEMPT Mon Mar 14 14:41:16 PDT 2011 [ 0.000000] Command line: root=UUID=7b14f772-a799-415f-a4c9-931ef81f6f0d ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable) [ 0.000000] BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bd6a7000 - 00000000bd7b7000 (usable) [ 0.000000] BIOS-e820: 00000000bd7b7000 - 00000000bd80f000 (reserved) [ 0.000000] BIOS-e820: 00000000bd80f000 - 00000000bd8c7000 (usable) [ 0.000000] BIOS-e820: 00000000bd8c7000 - 00000000bd8d2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd8d2000 - 00000000bd8d5000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd8d5000 - 00000000bd8d9000 (reserved) [ 0.000000] BIOS-e820: 00000000bd8d9000 - 00000000bd8dd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd8dd000 - 00000000bd8e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bd8e0000 - 00000000bd907000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd907000 - 00000000bd908000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb0f000 - 00000000bdb9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb9f000 - 00000000bdbff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdbff000 - 00000000bdc00000 (usable) [ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 74663HU/74663HU, BIOS 6DET44WW (2.08 ) 04/22/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 13C000000 mask FFC000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbdc00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdc00000 [ 0.000000] 0000000000 - 00bdc00000 page 2M [ 0.000000] kernel direct mapping tables up to bdc00000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ bd8c1000-bd8c7000 [ 0.000000] RAMDISK: 3600e000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bdb7bdd4 00094 (v01 LENOVO TP-6D 00002080 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bdb7bf00 000F4 (v03 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bdb7c2f4 0D881 (v01 LENOVO TP-6D 00002080 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bdb8e000 00040 [ 0.000000] ACPI: SSDT 00000000bdb7c0b4 00240 (v01 LENOVO TP-6D 00002080 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bdb89b75 00052 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bdb89bc7 00078 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bdb89c3f 0003C (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bdb89c7b 00038 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bdb89dc2 00176 (v01 LENOVO TP-6D 00002080 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bdb89f38 00028 (v01 LENOVO TP-6D 00002080 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bdb89f60 000A0 (v16 LENOVO TP-6D 00002080 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bdb8d203 0055F (v01 LENOVO TP-6D 00002080 INTL 20050513) [ 0.000000] ACPI: TCPA 00000000bd907000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000bd8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff8800b0000000-ffff8800b37fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd6a1 [ 0.000000] 0: 0x000bd6a7 -> 0x000bd7b7 [ 0.000000] 0: 0x000bd80f -> 0x000bd8c7 [ 0.000000] 0: 0x000bdbff -> 0x000bdc00 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1021944 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 757922 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd6a1000 - 00000000bd6a7000 [ 0.000000] PM: Registered nosave memory: 00000000bd7b7000 - 00000000bd80f000 [ 0.000000] PM: Registered nosave memory: 00000000bd8c7000 - 00000000bd8d2000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d2000 - 00000000bd8d5000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d5000 - 00000000bd8d9000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d9000 - 00000000bd8dd000 [ 0.000000] PM: Registered nosave memory: 00000000bd8dd000 - 00000000bd8e0000 [ 0.000000] PM: Registered nosave memory: 00000000bd8e0000 - 00000000bd907000 [ 0.000000] PM: Registered nosave memory: 00000000bd907000 - 00000000bd908000 [ 0.000000] PM: Registered nosave memory: 00000000bd908000 - 00000000bdb0f000 [ 0.000000] PM: Registered nosave memory: 00000000bdb0f000 - 00000000bdb9f000 [ 0.000000] PM: Registered nosave memory: 00000000bdb9f000 - 00000000bdbff000 [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bd400000 s75840 r8192 d22464 u1048576 [ 0.000000] pcpu-alloc: s75840 r8192 d22464 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004242 [ 0.000000] Kernel command line: root=UUID=7b14f772-a799-415f-a4c9-931ef81f6f0d ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3908256k/5177344k available (4769k kernel code, 1089568k absent, 179520k reserved, 3936k data, 524k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1862.079 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.15 BogoMIPS (lpj=7448316) [ 0.008054] pid_max: default: 32768 minimum: 301 [ 0.008421] Mount-cache hash table entries: 256 [ 0.009709] Initializing cgroup subsys ns [ 0.009757] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.009824] Initializing cgroup subsys cpuacct [ 0.009885] Initializing cgroup subsys memory [ 0.010034] Initializing cgroup subsys freezer [ 0.010250] CPU: Physical Processor ID: 0 [ 0.010297] CPU: Processor Core ID: 0 [ 0.010342] using mwait in idle threads. [ 0.010440] ACPI: Core revision 20110112 [ 0.156288] Setting APIC routing to flat [ 0.156802] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.199397] CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a [ 0.200011] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.200011] ... version: 2 [ 0.200011] ... bit width: 40 [ 0.200011] ... generic registers: 2 [ 0.200011] ... value mask: 000000ffffffffff [ 0.200011] ... max period: 000000007fffffff [ 0.200011] ... fixed-purpose events: 3 [ 0.200011] ... event mask: 0000000700000003 [ 0.208175] NMI watchdog enabled, takes one hw-pmu counter. [ 0.220029] lockdep: fixing up alternatives. [ 0.224109] Booting Node 0, Processors #1 Ok. [ 0.316089] NMI watchdog enabled, takes one hw-pmu counter. [ 0.320030] Brought up 2 CPUs [ 0.320078] Total of 2 processors activated (7448.10 BogoMIPS). [ 0.324820] NET: Registered protocol family 16 [ 0.327106] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.327176] ACPI: bus type pci registered [ 0.327862] PCI: Using configuration type 1 for base access [ 0.341091] bio: create slab at 0 [ 0.350220] ACPI: EC: EC description table is found, configuring boot EC [ 0.495771] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.540777] ACPI: SSDT 00000000bd8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.543687] ACPI: Dynamic OEM Table Load: [ 0.543800] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.547919] ACPI: SSDT 00000000bd8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.553040] ACPI: Dynamic OEM Table Load: [ 0.553153] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.589247] ACPI: SSDT 00000000bd8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.593288] ACPI: Dynamic OEM Table Load: [ 0.593401] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.611624] ACPI: SSDT 00000000bd8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.614264] ACPI: Dynamic OEM Table Load: [ 0.614377] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.634565] ACPI: Interpreter enabled [ 0.634615] ACPI: (supports S0 S3 S4 S5) [ 0.635183] ACPI: Using IOAPIC for interrupt routing [ 0.712765] ACPI: Power Resource [PUBS] (on) [ 0.774856] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.813400] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.813453] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.820369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.821204] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.821257] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.821310] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.821373] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.821436] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.821500] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.821645] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 0.821736] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 [ 0.821757] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] [ 0.821770] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.821780] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.821846] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 [ 0.821864] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit] [ 0.821956] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780 [ 0.821981] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit] [ 0.822045] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.822051] pci 0000:00:03.0: PME# disabled [ 0.822094] pci 0000:00:03.2: [8086:2a46] type 0 class 0x000101 [ 0.822115] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 0.822125] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 0.822136] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 0.822147] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 0.822157] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 0.822237] pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700 [ 0.822257] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.822268] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff] [ 0.822428] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 [ 0.822461] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 0.822476] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] [ 0.822492] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.822583] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.822590] pci 0000:00:19.0: PME# disabled [ 0.822638] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.822712] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.822804] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.822879] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.822970] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.823045] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.823152] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.823185] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff] [ 0.823302] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.823310] pci 0000:00:1a.7: PME# disabled [ 0.823366] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.823392] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.823503] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.823510] pci 0000:00:1b.0: PME# disabled [ 0.823560] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.823673] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.823679] pci 0000:00:1c.0: PME# disabled [ 0.823731] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 0.823844] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.823850] pci 0000:00:1c.1: PME# disabled [ 0.823904] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.824017] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.824023] pci 0000:00:1c.3: PME# disabled [ 0.824217] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.824292] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.824384] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.824458] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.824551] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.824625] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.824733] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.824766] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff] [ 0.824883] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.824890] pci 0000:00:1d.7: PME# disabled [ 0.824938] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.825061] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 [ 0.825267] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 [ 0.825304] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.825319] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.825334] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.825349] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.825364] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.825379] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff] [ 0.825445] pci 0000:00:1f.2: PME# supported from D3hot [ 0.825451] pci 0000:00:1f.2: PME# disabled [ 0.825497] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.825525] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit] [ 0.825564] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.825703] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.825757] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.825764] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.825774] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.826002] pci 0000:03:00.0: [8086:4237] type 0 class 0x000280 [ 0.826065] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] [ 0.826305] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.826333] pci 0000:03:00.0: PME# disabled [ 0.826452] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.826506] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.826513] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.826523] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.826616] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.826670] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.826676] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.826686] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.826822] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode) [ 0.826879] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.826886] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.826896] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.826908] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.826920] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.826931] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.826943] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.826954] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.826966] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.827000] pci_bus 0000:00: on NUMA node 0 [ 0.827023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.833648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.835070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.836566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 1.045011] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 1.047232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 1.049586] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 1.051806] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 1.054024] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 1.056363] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 1.058583] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 1.060816] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 1.062065] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.062314] vgaarb: loaded [ 1.063765] SCSI subsystem initialized [ 1.064217] libata version 3.00 loaded. [ 1.064697] PCI: Using ACPI for IRQ routing [ 1.064697] PCI: pci_cache_line_size set to 64 bytes [ 1.064773] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 1.064785] reserve RAM buffer: 00000000bd6a1000 - 00000000bfffffff [ 1.064931] reserve RAM buffer: 00000000bd7b7000 - 00000000bfffffff [ 1.065054] reserve RAM buffer: 00000000bd8c7000 - 00000000bfffffff [ 1.065157] reserve RAM buffer: 00000000bdc00000 - 00000000bfffffff [ 1.066326] Bluetooth: Core ver 2.15 [ 1.066472] NET: Registered protocol family 31 [ 1.066521] Bluetooth: HCI device and connection manager initialized [ 1.066587] Bluetooth: HCI socket layer initialized [ 1.066974] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 1.072274] Switching to clocksource hpet [ 1.072392] pnp: PnP ACPI init [ 1.072594] ACPI: bus type pnp registered [ 1.075689] Switched to NOHz mode on CPU #0 [ 1.075765] Switched to NOHz mode on CPU #1 [ 1.106031] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 1.106042] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 1.106052] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 1.106062] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 1.106072] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 1.106082] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 1.106091] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 1.106101] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 1.106110] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 1.106120] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 1.106130] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 1.106140] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 1.106149] pnp 00:00: [mem 0x000ec000-0x000effff] [ 1.106159] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 1.106169] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 1.106178] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 1.106188] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 1.106893] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.106965] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 1.107037] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 1.107107] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 1.107177] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 1.107248] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 1.107323] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 1.107399] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 1.107475] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 1.107551] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 1.107626] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 1.107702] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 1.107777] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 1.107853] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 1.107928] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 1.107984] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.108206] pnp 00:01: [bus 00-ff] [ 1.108216] pnp 00:01: [io 0x0cf8-0x0cff] [ 1.108226] pnp 00:01: [io 0x0000-0x0cf7 window] [ 1.108235] pnp 00:01: [io 0x0d00-0xffff window] [ 1.108245] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 1.108255] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 1.108264] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 1.108275] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 1.108285] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 1.108295] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 1.108304] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 1.108314] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 1.108324] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 1.108333] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 1.108343] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 1.108353] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 1.108362] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 1.108372] pnp 00:01: [mem 0xc0000000-0xfebfffff window] [ 1.108381] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 1.108748] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.130832] pnp 00:02: [io 0x0010-0x001f] [ 1.130842] pnp 00:02: [io 0x0090-0x009f] [ 1.130852] pnp 00:02: [io 0x0024-0x0025] [ 1.130861] pnp 00:02: [io 0x0028-0x0029] [ 1.130870] pnp 00:02: [io 0x002c-0x002d] [ 1.130880] pnp 00:02: [io 0x0030-0x0031] [ 1.130889] pnp 00:02: [io 0x0034-0x0035] [ 1.130898] pnp 00:02: [io 0x0038-0x0039] [ 1.130907] pnp 00:02: [io 0x003c-0x003d] [ 1.130917] pnp 00:02: [io 0x00a4-0x00a5] [ 1.130927] pnp 00:02: [io 0x00a8-0x00a9] [ 1.130936] pnp 00:02: [io 0x00ac-0x00ad] [ 1.130945] pnp 00:02: [io 0x00b0-0x00b5] [ 1.130954] pnp 00:02: [io 0x00b8-0x00b9] [ 1.130963] pnp 00:02: [io 0x00bc-0x00bd] [ 1.130973] pnp 00:02: [io 0x0050-0x0053] [ 1.130982] pnp 00:02: [io 0x0072-0x0077] [ 1.130991] pnp 00:02: [io 0x002e-0x002f] [ 1.131001] pnp 00:02: [io 0x1000-0x107f] [ 1.131010] pnp 00:02: [io 0x1180-0x11ff] [ 1.131019] pnp 00:02: [io 0x0800-0x080f] [ 1.131029] pnp 00:02: [io 0x15e0-0x15ef] [ 1.131038] pnp 00:02: [io 0x1600-0x167f] [ 1.131047] pnp 00:02: [io 0x1680-0x169f] [ 1.131057] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 1.131066] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 1.131076] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 1.131085] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 1.131095] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 1.131104] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 1.131831] system 00:02: [io 0x1000-0x107f] has been reserved [ 1.131902] system 00:02: [io 0x1180-0x11ff] has been reserved [ 1.131972] system 00:02: [io 0x0800-0x080f] has been reserved [ 1.132058] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 1.132128] system 00:02: [io 0x1600-0x167f] has been reserved [ 1.132198] system 00:02: [io 0x1680-0x169f] has been reserved [ 1.132268] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 1.132340] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.132410] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.132481] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.132552] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.132622] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 1.132677] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.133298] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.133658] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.133790] pnp 00:04: [io 0x0000-0x000f] [ 1.133800] pnp 00:04: [io 0x0080-0x008f] [ 1.133809] pnp 00:04: [io 0x00c0-0x00df] [ 1.133819] pnp 00:04: [dma 4] [ 1.134176] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.134307] pnp 00:05: [io 0x0061] [ 1.134668] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.134798] pnp 00:06: [io 0x00f0] [ 1.134816] pnp 00:06: [irq 13] [ 1.135177] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.135308] pnp 00:07: [io 0x0070-0x0071] [ 1.135324] pnp 00:07: [irq 8] [ 1.135684] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.135816] pnp 00:08: [io 0x0060] [ 1.135825] pnp 00:08: [io 0x0064] [ 1.135840] pnp 00:08: [irq 1] [ 1.136225] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.136360] pnp 00:09: [irq 12] [ 1.136732] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 1.158595] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 1.158955] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 1.162993] pnp: PnP ACPI: found 11 devices [ 1.163042] ACPI: ACPI bus type pnp unregistered [ 1.190817] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff] [ 1.190876] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.190944] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.191012] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff] [ 1.191067] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff] [ 1.191121] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.191173] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 1.191230] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 1.191286] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.191356] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.191408] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 1.191464] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 1.191520] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.191590] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 1.191642] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.191698] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 1.191754] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.191824] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] [ 1.191874] pci 0000:00:1e.0: bridge window [io disabled] [ 1.191930] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.191984] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.192081] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.192138] pci 0000:00:1c.0: setting latency timer to 64 [ 1.192159] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.192215] pci 0000:00:1c.1: setting latency timer to 64 [ 1.192236] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.192292] pci 0000:00:1c.3: setting latency timer to 64 [ 1.192302] pci 0000:00:1e.0: setting latency timer to 64 [ 1.192307] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.192310] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.192313] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.192316] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.192319] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.192322] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.192325] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.192328] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 1.192332] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.192335] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 1.192338] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] [ 1.192341] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.192344] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 1.192347] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 1.192350] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.192353] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 1.192356] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 1.192359] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 1.192362] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.192365] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.192368] pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.192501] NET: Registered protocol family 2 [ 1.192800] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.194331] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.196102] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 1.199432] TCP: Hash tables configured (established 262144 bind 65536) [ 1.199520] TCP reno registered [ 1.199588] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 1.199882] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 1.200622] NET: Registered protocol family 1 [ 1.200740] pci 0000:00:02.0: Boot video device [ 1.200812] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.200815] pci 0000:00:1a.0: Performing full reset [ 1.200846] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.200849] pci 0000:00:1a.1: Performing full reset [ 1.200879] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.200882] pci 0000:00:1a.2: Performing full reset [ 1.201039] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.201042] pci 0000:00:1d.0: Performing full reset [ 1.201072] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.201075] pci 0000:00:1d.1: Performing full reset [ 1.201105] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 1.201108] pci 0000:00:1d.2: Performing full reset [ 1.201250] PCI: CLS 64 bytes, default 64 [ 1.201625] Trying to unpack rootfs image as initramfs... [ 2.119565] Freeing initrd memory: 32648k freed [ 2.275853] DMA-API: preallocated 32768 debug entries [ 2.275910] DMA-API: debugging enabled by kernel config [ 2.275969] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.276042] Placing 64MB software IO TLB between ffff8800b8c9d000 - ffff8800bcc9d000 [ 2.276105] software IO TLB at phys 0xb8c9d000 - 0xbcc9d000 [ 2.276337] Simple Boot Flag at 0x35 set to 0x1 [ 2.277806] Scanning for low memory corruption every 60 seconds [ 2.278671] audit: initializing netlink socket (disabled) [ 2.278799] type=2000 audit(1300141136.272:1): initialized [ 2.295809] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.321025] fuse init (API version 7.16) [ 2.321992] msgmni has been set to 7697 [ 2.323276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.323348] io scheduler noop registered [ 2.323396] io scheduler deadline registered [ 2.323764] io scheduler cfq registered (default) [ 2.325345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.325756] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.326581] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.327780] ACPI: AC Adapter [AC] (on-line) [ 2.329305] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 2.364029] ACPI: Lid Switch [LID] [ 2.364737] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 2.428020] ACPI: Sleep Button [SLPB] [ 2.428743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.428819] ACPI: Power Button [PWRF] [ 2.429050] ACPI: acpi_idle registered with cpuidle [ 2.546331] Monitor-Mwait will be used to enter C-1 state [ 2.546409] Monitor-Mwait will be used to enter C-2 state [ 2.546483] Monitor-Mwait will be used to enter C-3 state [ 2.546496] Marking TSC unstable due to TSC halts in idle [ 2.643064] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.643116] ACPI: Thermal Zone [THM0] (62 C) [ 2.652727] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.652779] ACPI: Thermal Zone [THM1] (65 C) [ 2.653364] Linux agpgart interface v0.103 [ 2.669897] brd: module loaded [ 2.678003] loop: module loaded [ 2.679447] ahci 0000:00:1f.2: version 3.0 [ 2.679499] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 2.679716] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 2.679825] ahci: SSS flag set, parallel bus scan disabled [ 2.679903] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 2.679969] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 2.680126] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.690592] scsi0 : ahci [ 2.694659] scsi1 : ahci [ 2.695829] scsi2 : ahci [ 2.696986] scsi3 : ahci [ 2.706756] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.706912] ACPI: Battery Slot [BAT0] (battery present) [ 2.708163] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 40 [ 2.708228] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 40 [ 2.708290] ata3: DUMMY [ 2.708336] ata4: DUMMY [ 2.709041] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.709234] ata_generic 0000:00:03.2: setting latency timer to 64 [ 2.715450] scsi4 : ata_generic [ 2.716561] scsi5 : ata_generic [ 2.717469] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 [ 2.717522] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 [ 2.717808] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 2.717860] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 2.717988] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.718064] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.718328] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 3.028032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.031429] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.031434] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.031499] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.031801] ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102M3, max UDMA/133 [ 3.031854] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.035346] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.035351] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.035417] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.035719] ata1.00: configured for UDMA/133 [ 3.036637] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5 [ 3.039477] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.039517] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:1d:fb:eb [ 3.039520] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.039553] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 3.039712] PPP generic driver version 2.4.2 [ 3.040614] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.040652] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.041551] sd 0:0:0:0: [sda] Write Protect is off [ 3.041603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.041864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.045220] sda: sda1 sda2 [ 3.048135] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.051544] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.051975] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.052996] mousedev: PS/2 mouse device common for all mice [ 3.054459] rtc_cmos 00:07: RTC can wake from S4 [ 3.059982] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.068626] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.068743] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.068856] Linux video capture interface: v2.00 [ 3.069370] device-mapper: uevent: version 1.0.3 [ 3.070039] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 3.070297] device-mapper: multipath: version 1.2.0 loaded [ 3.070362] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.072020] cpuidle: using governor ladder [ 3.073546] cpuidle: using governor menu [ 3.074504] TCP cubic registered [ 3.075715] NET: Registered protocol family 10 [ 3.078210] NET: Registered protocol family 17 [ 3.078448] Bluetooth: L2CAP ver 2.15 [ 3.078496] Bluetooth: L2CAP socket layer initialized [ 3.078562] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.078610] Bluetooth: SCO socket layer initialized [ 3.078842] Bluetooth: RFCOMM TTY layer initialized [ 3.078909] Bluetooth: RFCOMM socket layer initialized [ 3.078959] Bluetooth: RFCOMM ver 1.11 [ 3.079007] Registering the dns_resolver key type [ 3.079955] registered taskstats version 1 [ 3.080162] kmemleak: Kernel memory leak detector initialized [ 3.080187] kmemleak: Automatic memory scanning thread started [ 3.081710] rtc_cmos 00:07: setting system clock to 2011-03-14 22:18:57 UTC (1300141137) [ 3.081775] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.081826] EDD information not available. [ 3.364108] ata2: SATA link down (SStatus 0 SControl 300) [ 3.532103] Freeing unused kernel memory: 524k freed [ 3.532353] Write protecting the kernel read-only data: 8192k [ 3.537673] Freeing unused kernel memory: 1356k freed [ 3.538431] Freeing unused kernel memory: 16k freed [ 3.558499] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.578107] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 4.010244] usbcore: registered new interface driver usbfs [ 4.011253] usbcore: registered new interface driver hub [ 4.011879] usbcore: registered new device driver usb [ 4.018682] uhci_hcd: USB Universal Host Controller Interface driver [ 4.019354] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4.019423] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4.019482] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.019590] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.019596] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.019726] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.022420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.022473] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 4.022540] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 4.028196] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.028255] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.028258] uhci_hcd 0000:00:1a.0: Performing full reset [ 4.028275] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.028418] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 4.028848] usb usb1: default language 0x0409 [ 4.028988] usb usb1: udev 1, busnum 1, minor = 0 [ 4.028991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.029043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.029104] usb usb1: Product: UHCI Host Controller [ 4.029153] usb usb1: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.029202] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.029942] usb usb1: usb_probe_device [ 4.029946] usb usb1: configuration #1 chosen from 1 choice [ 4.030060] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.030552] hub 1-0:1.0: usb_probe_interface [ 4.030555] hub 1-0:1.0: usb_probe_interface - got id [ 4.030560] hub 1-0:1.0: USB hub found [ 4.030701] hub 1-0:1.0: 2 ports detected [ 4.030768] hub 1-0:1.0: standalone hub [ 4.030770] hub 1-0:1.0: no power switching (usb 1.0) [ 4.030772] hub 1-0:1.0: individual port over-current protection [ 4.030775] hub 1-0:1.0: power on to power good time: 2ms [ 4.030877] hub 1-0:1.0: local power source is good [ 4.030892] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.032686] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.032765] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.032770] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.032861] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 4.052159] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.052213] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.052216] uhci_hcd 0000:00:1a.1: Performing full reset [ 4.052381] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 4.052711] usb usb2: default language 0x0409 [ 4.052850] usb usb2: udev 1, busnum 2, minor = 128 [ 4.052853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.052904] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.052966] usb usb2: Product: UHCI Host Controller [ 4.053015] usb usb2: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.053064] usb usb2: SerialNumber: 0000:00:1a.1 [ 4.053788] usb usb2: usb_probe_device [ 4.053791] usb usb2: configuration #1 chosen from 1 choice [ 4.053868] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.054444] hub 2-0:1.0: usb_probe_interface [ 4.054447] hub 2-0:1.0: usb_probe_interface - got id [ 4.054452] hub 2-0:1.0: USB hub found [ 4.054596] hub 2-0:1.0: 2 ports detected [ 4.054661] hub 2-0:1.0: standalone hub [ 4.054663] hub 2-0:1.0: no power switching (usb 1.0) [ 4.054665] hub 2-0:1.0: individual port over-current protection [ 4.054669] hub 2-0:1.0: power on to power good time: 2ms [ 4.054763] hub 2-0:1.0: local power source is good [ 4.054781] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.056672] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 4.056741] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 4.056813] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.056889] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.056894] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.056994] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 4.072162] uhci_hcd 0000:00:1a.2: detected 2 ports [ 4.072217] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.072220] uhci_hcd 0000:00:1a.2: Performing full reset [ 4.072237] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 4.072387] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 4.072720] usb usb3: default language 0x0409 [ 4.072860] usb usb3: udev 1, busnum 3, minor = 256 [ 4.072863] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.072914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.072976] usb usb3: Product: UHCI Host Controller [ 4.073024] usb usb3: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.073074] usb usb3: SerialNumber: 0000:00:1a.2 [ 4.073797] usb usb3: usb_probe_device [ 4.073801] usb usb3: configuration #1 chosen from 1 choice [ 4.073876] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.074345] hub 3-0:1.0: usb_probe_interface [ 4.074348] hub 3-0:1.0: usb_probe_interface - got id [ 4.074353] hub 3-0:1.0: USB hub found [ 4.074493] hub 3-0:1.0: 2 ports detected [ 4.074563] hub 3-0:1.0: standalone hub [ 4.074565] hub 3-0:1.0: no power switching (usb 1.0) [ 4.074567] hub 3-0:1.0: individual port over-current protection [ 4.074570] hub 3-0:1.0: power on to power good time: 2ms [ 4.074651] hub 3-0:1.0: local power source is good [ 4.074666] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.076327] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4.076395] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4.076451] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.076526] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.076531] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.076626] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.088071] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.088137] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.088140] uhci_hcd 0000:00:1d.0: Performing full reset [ 4.088156] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 4.088292] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 4.088621] usb usb4: default language 0x0409 [ 4.088759] usb usb4: udev 1, busnum 4, minor = 384 [ 4.088762] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.088814] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.088875] usb usb4: Product: UHCI Host Controller [ 4.088923] usb usb4: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.088973] usb usb4: SerialNumber: 0000:00:1d.0 [ 4.089691] usb usb4: usb_probe_device [ 4.089694] usb usb4: configuration #1 chosen from 1 choice [ 4.089769] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 4.090235] hub 4-0:1.0: usb_probe_interface [ 4.090238] hub 4-0:1.0: usb_probe_interface - got id [ 4.090242] hub 4-0:1.0: USB hub found [ 4.090383] hub 4-0:1.0: 2 ports detected [ 4.090452] hub 4-0:1.0: standalone hub [ 4.090454] hub 4-0:1.0: no power switching (usb 1.0) [ 4.090456] hub 4-0:1.0: individual port over-current protection [ 4.090459] hub 4-0:1.0: power on to power good time: 2ms [ 4.090540] hub 4-0:1.0: local power source is good [ 4.090556] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 4.092184] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.092260] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.092265] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.092362] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 4.108100] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.108153] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.108156] uhci_hcd 0000:00:1d.1: Performing full reset [ 4.108328] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 4.108656] usb usb5: default language 0x0409 [ 4.108793] usb usb5: udev 1, busnum 5, minor = 512 [ 4.108795] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.108847] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.108909] usb usb5: Product: UHCI Host Controller [ 4.108957] usb usb5: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.109007] usb usb5: SerialNumber: 0000:00:1d.1 [ 4.109734] usb usb5: usb_probe_device [ 4.109737] usb usb5: configuration #1 chosen from 1 choice [ 4.109814] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 4.110382] hub 5-0:1.0: usb_probe_interface [ 4.110385] hub 5-0:1.0: usb_probe_interface - got id [ 4.110389] hub 5-0:1.0: USB hub found [ 4.110532] hub 5-0:1.0: 2 ports detected [ 4.110596] hub 5-0:1.0: standalone hub [ 4.110599] hub 5-0:1.0: no power switching (usb 1.0) [ 4.110601] hub 5-0:1.0: individual port over-current protection [ 4.110604] hub 5-0:1.0: power on to power good time: 2ms [ 4.110698] hub 5-0:1.0: local power source is good [ 4.110715] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 4.112411] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.112487] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.112492] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.112590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 4.128208] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00 [ 4.128220] hub 1-0:1.0: port 1: status 0301 change 0001 [ 4.128233] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.128296] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.128299] uhci_hcd 0000:00:1d.2: Performing full reset [ 4.128355] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 4.128697] usb usb6: default language 0x0409 [ 4.128836] usb usb6: udev 1, busnum 6, minor = 640 [ 4.128839] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.128891] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.128952] usb usb6: Product: UHCI Host Controller [ 4.129001] usb usb6: Manufacturer: Linux 2.6.38-rc8+ uhci_hcd [ 4.129051] usb usb6: SerialNumber: 0000:00:1d.2 [ 4.129771] usb usb6: usb_probe_device [ 4.129775] usb usb6: configuration #1 chosen from 1 choice [ 4.129850] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 4.130320] hub 6-0:1.0: usb_probe_interface [ 4.130323] hub 6-0:1.0: usb_probe_interface - got id [ 4.130327] hub 6-0:1.0: USB hub found [ 4.130469] hub 6-0:1.0: 2 ports detected [ 4.130538] hub 6-0:1.0: standalone hub [ 4.130540] hub 6-0:1.0: no power switching (usb 1.0) [ 4.130542] hub 6-0:1.0: individual port over-current protection [ 4.130545] hub 6-0:1.0: power on to power good time: 2ms [ 4.130627] hub 6-0:1.0: local power source is good [ 4.130642] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 4.132311] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 4.132382] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 4.132440] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 4.132570] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.132575] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.132677] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 4.148223] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.148229] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.148380] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.148432] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.152406] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 4.152418] hub 2-0:1.0: port 1: status 0101 change 0001 [ 4.152468] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 4.152479] hub 2-0:1.0: port 2: status 0101 change 0001 [ 4.152523] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 4.152526] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.152683] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 4.152736] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.156607] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.168103] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.168495] usb usb7: default language 0x0409 [ 4.168631] usb usb7: udev 1, busnum 7, minor = 768 [ 4.168634] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.168686] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.168747] usb usb7: Product: EHCI Host Controller [ 4.168796] usb usb7: Manufacturer: Linux 2.6.38-rc8+ ehci_hcd [ 4.168846] usb usb7: SerialNumber: 0000:00:1a.7 [ 4.169557] usb usb7: usb_probe_device [ 4.169561] usb usb7: configuration #1 chosen from 1 choice [ 4.169636] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 4.170095] hub 7-0:1.0: usb_probe_interface [ 4.170098] hub 7-0:1.0: usb_probe_interface - got id [ 4.170102] hub 7-0:1.0: USB hub found [ 4.170257] hub 7-0:1.0: 6 ports detected [ 4.170323] hub 7-0:1.0: standalone hub [ 4.170325] hub 7-0:1.0: no power switching (usb 1.0) [ 4.170327] hub 7-0:1.0: individual port over-current protection [ 4.170330] hub 7-0:1.0: power on to power good time: 20ms [ 4.170410] hub 7-0:1.0: local power source is good [ 4.170424] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 4.171881] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 4.171894] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 4.171907] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 4.172117] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.172229] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 4.172305] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 4.172375] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.172481] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.172486] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.172577] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 4.188122] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00 [ 4.188133] hub 4-0:1.0: port 1: status 0301 change 0001 [ 4.188196] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.188202] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.188368] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.188419] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.192318] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 4.192321] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 4.192452] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 4.192505] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.196403] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.208089] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.208105] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.208476] usb usb8: default language 0x0409 [ 4.208632] usb usb8: udev 1, busnum 8, minor = 896 [ 4.208635] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.208688] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.208750] usb usb8: Product: EHCI Host Controller [ 4.208799] usb usb8: Manufacturer: Linux 2.6.38-rc8+ ehci_hcd [ 4.208850] usb usb8: SerialNumber: 0000:00:1d.7 [ 4.209630] usb usb8: usb_probe_device [ 4.209634] usb usb8: configuration #1 chosen from 1 choice [ 4.209708] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 4.210188] hub 8-0:1.0: usb_probe_interface [ 4.210191] hub 8-0:1.0: usb_probe_interface - got id [ 4.210195] hub 8-0:1.0: USB hub found [ 4.210350] hub 8-0:1.0: 6 ports detected [ 4.210412] hub 8-0:1.0: standalone hub [ 4.210414] hub 8-0:1.0: no power switching (usb 1.0) [ 4.210417] hub 8-0:1.0: individual port over-current protection [ 4.210420] hub 8-0:1.0: power on to power good time: 20ms [ 4.210510] hub 8-0:1.0: local power source is good [ 4.210528] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 4.212282] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 4.212297] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 4.212311] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 4.216024] Monitor-Mwait will be used to enter C-3 state [ 4.228170] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 4.228198] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 4.228233] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 4.268128] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 4.268142] hub 7-0:1.0: port 1: status 0501 change 0001 [ 4.268224] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 4.268236] hub 7-0:1.0: port 3: status 0501 change 0001 [ 4.268286] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 4.268295] hub 7-0:1.0: port 4: status 0501 change 0001 [ 4.308151] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 4.308164] hub 8-0:1.0: port 1: status 0501 change 0001 [ 4.356162] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 4.356174] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.356182] hub 2-0:1.0: state 7 ports 2 chg 0006 evt 0006 [ 4.356209] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 4.356248] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 4.484161] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 4.484187] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 [ 4.484225] hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 4.612161] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 4.612166] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0002 [ 4.612193] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 [ 4.612231] hub 4-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 4.740162] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 4.740172] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.740180] hub 7-0:1.0: state 7 ports 6 chg 001a evt 0000 [ 4.740212] hub 7-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 4.740288] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion [ 4.796098] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 4.796219] hub 7-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 4.852258] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 4.852263] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 4.852273] hub 7-0:1.0: port 3 not reset yet, waiting 50ms [ 4.908122] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 4.908238] hub 7-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 4.964384] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion [ 4.964388] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 4.964398] hub 7-0:1.0: port 4 not reset yet, waiting 50ms [ 5.020121] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 5.020215] hub 8-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 5.020243] hub 8-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 5.020280] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion [ 5.076120] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 5.076214] hub 7-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 5.076253] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 5.076278] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00 [ 5.076316] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 5.112094] usb usb3: suspend_rh (auto-stop) [ 5.112120] usb usb5: suspend_rh (auto-stop) [ 5.204117] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 5.316123] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 5.360066] usb usb6: suspend_rh (auto-stop) [ 5.470672] usb 1-1: skipped 1 descriptor after interface [ 5.475668] usb 1-1: default language 0x0409 [ 5.491670] usb 1-1: udev 2, busnum 1, minor = 1 [ 5.491673] usb 1-1: New USB device found, idVendor=046d, idProduct=c018 [ 5.491725] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.491777] usb 1-1: Product: USB Optical Mouse [ 5.491825] usb 1-1: Manufacturer: Logitech [ 5.492623] usb 1-1: usb_probe_device [ 5.492627] usb 1-1: configuration #1 chosen from 1 choice [ 5.495678] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 5.497227] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 5.497252] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 5.497288] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 5.507437] usbhid 1-1:1.0: usb_probe_interface [ 5.507441] usbhid 1-1:1.0: usb_probe_interface - got id [ 5.521694] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input5 [ 5.523282] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1/input0 [ 5.523471] usbcore: registered new interface driver usbhid [ 5.523522] usbhid: USB HID core driver [ 5.624089] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 5.736125] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 5.868091] usb 2-1: ep0 maxpacket = 8 [ 5.894584] usb 2-1: default language 0x0409 [ 5.903600] usb 2-1: udev 2, busnum 2, minor = 129 [ 5.903604] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 [ 5.903657] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.903715] usb 2-1: Product: Fingerprint Sensor [ 5.904382] usb 2-1: usb_probe_device [ 5.904386] usb 2-1: configuration #1 chosen from 1 choice [ 5.905610] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 5.907709] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 5.907744] hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 6.032102] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 6.144124] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 6.296684] usb 2-2: skipped 1 descriptor after interface [ 6.299594] usb 2-2: default language 0x0409 [ 6.310600] usb 2-2: udev 3, busnum 2, minor = 130 [ 6.310604] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 6.310657] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.310710] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 6.310767] usb 2-2: Manufacturer: Lenovo Computer Corp [ 6.311383] usb 2-2: usb_probe_device [ 6.311386] usb 2-2: configuration #1 chosen from 1 choice [ 6.312649] usb 2-2: adding 2-2:1.0 (config #1, interface 0) [ 6.314271] usb 2-2: adding 2-2:1.1 (config #1, interface 1) [ 6.315408] usb 2-2: adding 2-2:1.2 (config #1, interface 2) [ 6.316503] usb 2-2: adding 2-2:1.3 (config #1, interface 3) [ 6.317656] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 6.317700] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 6.317726] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00 [ 6.317764] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 6.444119] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 6.556119] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 6.713517] usb 4-1: skipped 1 descriptor after interface [ 6.713529] usb 4-1: skipped 1 descriptor after interface [ 6.718500] usb 4-1: default language 0x0409 [ 6.735518] usb 4-1: udev 2, busnum 4, minor = 385 [ 6.735521] usb 4-1: New USB device found, idVendor=046d, idProduct=c30a [ 6.735574] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.735627] usb 4-1: Product: Logitech USB Keyboard [ 6.735676] usb 4-1: Manufacturer: Logitech [ 6.736365] usb 4-1: usb_probe_device [ 6.736369] usb 4-1: configuration #1 chosen from 1 choice [ 6.739527] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 6.739944] usbhid 4-1:1.0: usb_probe_interface [ 6.739947] usbhid 4-1:1.0: usb_probe_interface - got id [ 6.740886] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 6.741268] usbhid 4-1:1.1: usb_probe_interface [ 6.741271] usbhid 4-1:1.1: usb_probe_interface - got id [ 6.743187] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 6.743233] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.743239] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 6.784728] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input6 [ 6.784852] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 6.785875] logitech 0003:046D:C30A.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0 [ 6.808118] hub 6-0:1.0: hub_suspend [ 6.808154] usb usb6: bus auto-suspend [ 6.808157] usb usb6: suspend_rh [ 6.824052] hub 3-0:1.0: hub_suspend [ 6.824061] usb usb3: bus auto-suspend [ 6.824064] usb usb3: suspend_rh [ 6.824085] hub 5-0:1.0: hub_suspend [ 6.824091] usb usb5: bus auto-suspend [ 6.824094] usb usb5: suspend_rh [ 6.824234] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input7 [ 6.824347] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 32, phase 16, 118 us [ 6.825812] logitech 0003:046D:C30A.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input1 [ 7.808084] hub 7-0:1.0: hub_suspend [ 7.808092] usb usb7: bus auto-suspend [ 7.808096] ehci_hcd 0000:00:1a.7: suspend root hub [ 8.808035] hub 8-0:1.0: hub_suspend [ 8.808043] usb usb8: bus auto-suspend [ 8.808046] ehci_hcd 0000:00:1d.7: suspend root hub [ 8.814688] EXT3-fs: barriers not enabled [ 8.815217] kjournald starting. Commit interval 5 seconds [ 8.815411] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 13.963023] Adding 1871568k swap on /dev/sda2. Priority:-1 extents:1 across:1871568k SS [ 13.985675] EXT3-fs (sda1): using internal journal [ 14.044968] udev[2723]: starting version 163 [ 14.453105] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 14.453491] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 14.515056] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 14.515591] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 15.030453] cfg80211: Calling CRDA to update world regulatory domain [ 15.113800] cfg80211: World regulatory domain updated: [ 15.113805] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.113809] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.113812] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.113816] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.113819] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.113823] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.133763] [drm] Initialized drm 1.1.0 20060810 [ 15.329639] i915 0000:00:02.0: power state changed by ACPI to D0 [ 15.329663] i915 0000:00:02.0: power state changed by ACPI to D0 [ 15.329673] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.329679] i915 0000:00:02.0: setting latency timer to 64 [ 15.365990] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 15.365994] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 15.366183] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.366194] iwlagn 0000:03:00.0: setting latency timer to 64 [ 15.366270] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 15.412979] iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 15.412984] iwlagn 0000:03:00.0: Device SKU: 0Xb [ 15.413027] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 15.413147] iwlagn 0000:03:00.0: irq 42 for MSI/MSI-X [ 15.441795] iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-5000-5.ucode' failed. [ 15.462948] iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-5000-4.ucode' failed. [ 15.477980] iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-5000-3.ucode' failed. [ 15.502355] iwlagn 0000:03:00.0: Firmware has old API version. Expected v5, got v2. New firmware can be obtained from http://www.intellinuxwireless.org. [ 15.502433] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 15.566684] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.674909] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 15.675024] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 15.675027] [drm] Driver supports precise vblank timestamp query. [ 15.865521] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 16.217865] fb0: inteldrmfb frame buffer device [ 16.217868] drm: registered panic notifier [ 16.356555] acpi device:02: registered as cooling_device2 [ 16.361692] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 16.362599] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 16.364110] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 16.364247] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.364392] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 16.364578] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.436750] Console: switching to colour frame buffer device 180x56 [ 16.831668] sshd (3155): /proc/3155/oom_adj is deprecated, please use /proc/3155/oom_score_adj instead. [ 17.184414] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 17.240272] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 17.241395] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.573382] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.984113] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 99 us [ 18.920887] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 18.920893] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 18.921436] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.796055] eth0: no IPv6 routers present [ 77.496947] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 99.023707] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 99.024074] wlan0: Trigger new scan to find an IBSS to join [ 101.615390] wlan0: Selected IBSS BSSID 2e:25:b3:96:d5:f9 based on configured SSID [ 101.631736] iwlagn 0000:03:00.0: Unable to find TIM Element in beacon [ 101.633246] iwlagn 0000:03:00.0: Unable to find TIM Element in beacon [ 109.064041] wlan0: no IPv6 routers present [ 112.060801] iwlagn 0000:03:00.0: PCI INT A disabled [ 191.990285] irq 23: nobody cared (try booting with the "irqpoll" option) [ 191.990291] Pid: 0, comm: swapper Not tainted 2.6.38-rc8+ #776 [ 191.990294] Call Trace: [ 191.990296] [] ? __report_bad_irq+0x26/0xa0 [ 191.990306] [] ? note_interrupt+0x18c/0x1d0 [ 191.990311] [] ? handle_fasteoi_irq+0xcd/0x100 [ 191.990316] [] ? handle_irq+0x1d/0x30 [ 191.990320] [] ? do_IRQ+0x58/0xd0 [ 191.990325] [] ? ret_from_intr+0x0/0xe [ 191.990327] [] ? native_sched_clock+0x27/0x80 [ 191.990337] [] ? acpi_idle_enter_simple+0xbe/0xf0 [ 191.990341] [] ? acpi_idle_enter_simple+0xb9/0xf0 [ 191.990346] [] ? cpuidle_idle_call+0x82/0xf0 [ 191.990351] [] ? cpu_idle+0x56/0xb0 [ 191.990355] [] ? rest_init+0xcb/0xe0 [ 191.990359] [] ? rest_init+0x0/0xe0 [ 191.990364] [] ? start_kernel+0x38a/0x395 [ 191.990369] [] ? x86_64_start_reservations+0x131/0x135 [ 191.990374] [] ? x86_64_start_kernel+0xf2/0xf9 [ 191.990376] handlers: [ 191.990378] [] (usb_hcd_irq+0x0/0x70 [usbcore]) [ 191.990394] Disabling IRQ #23 --UugvWAfsgieZRqgk-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/