Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932583Ab1CWOGi (ORCPT ); Wed, 23 Mar 2011 10:06:38 -0400 Received: from rcsinet10.oracle.com ([148.87.113.121]:50421 "EHLO rcsinet10.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756103Ab1CWOGg convert rfc822-to-8bit (ORCPT ); Wed, 23 Mar 2011 10:06:36 -0400 Subject: Re: [bisect] kernel 2.6.38 regression with root nfs mounting Mime-Version: 1.0 (Apple Message framework v1082) Content-Type: text/plain; charset=utf-8 From: Chuck Lever In-Reply-To: Date: Wed, 23 Mar 2011 10:06:23 -0400 Cc: Trond.Myklebust@netapp.com, broonie@opensource.wolfsonmicro.com, bdowning@lavos.net, linux-nfs@vger.kernel.org, LKML Content-Transfer-Encoding: 8BIT Message-Id: <977C528D-4540-4EB2-92F9-6DAF357D8C81@oracle.com> References: <43F07477-9075-444D-9BBB-368650538EA8@oracle.com> To: Belisko Marek X-Mailer: Apple Mail (2.1082) X-Source-IP: acsmt356.oracle.com [141.146.40.156] X-Auth-Type: Internal IP X-CT-RefId: str=0001.0A090206.4D89FE63.00D3,ss=1,fgs=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11252 Lines: 253 On Mar 23, 2011, at 9:46 AM, Belisko Marek wrote: > On Wed, Mar 23, 2011 at 2:44 PM, Chuck Lever wrote: >> >> On Mar 23, 2011, at 2:30 AM, Belisko Marek wrote: >> >>> Added linux-nfs to CC (to keep history) add added log with nfsdebugroot enabled. >>> >>> On Tue, Mar 22, 2011 at 1:34 PM, Chuck Lever wrote: >>>> >>>> On Mar 22, 2011, at 3:51 AM, Belisko Marek wrote: >>>> >>>>> After update from 2.6.38-rc8 to 2.6.38 is mounting rootfs over nfs not possible. >>>>> Log: >>>>> VFS: Mounted root (nfs filesystem) on device 0:14. >>>>> Freeing init memory: 132K >>>>> nfs: server 10.146.1.21 not responding, still trying >>>>> nfs: server 10.146.1.21 not responding, still trying >>>>> >>>>> This is never ending. I make short bisect (not too much commits >>>>> between versions) >>>>> and bad commit was reported: 53d4737580535e073963b91ce87d4216e434fab5 >>>>> >>>>> NFS: NFSROOT should default to "proto=udp" >>>>> >>>>> I've tested on mini2440 board (DM9000, static IP). >>>>> Is there some missing option or something else to be checked? >>>> >>>> NFSROOT is supposed to work as it did before 2.6.37. >>>> >>>> Enable NFSROOT debugging (see the description of nfsrootdebug in Documentation/filesystems/nfs/nfsroot.txt), try your boot, and then post the contents of your system log to linux-nfs@vger.kernel.org. >>>> >>>> -- >>>> Chuck Lever >>>> chuck[dot]lever[at]oracle[dot]com >>>> >>>> >>>> >>>> >>>> >>> >>> Linux version 2.6.38-rc7+ (open-nandra@host) (gcc version 4.5.1 >>> (Sourcery G++ Lite 2010.09-50) ) #1 Wed Mar 23 07:23:36 CET 2011 >>> CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 >>> CPU: VIVT data cache, VIVT instruction cache >>> Machine: MINI2440 >>> Memory policy: ECC disabled, Data cache writeback >>> CPU S3C2440A (id 0x32440001) >>> S3C24XX Clocks, Copyright 2004 Simtec Electronics >>> S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz >>> CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 >>> Kernel command line: console=ttySAC0,115200 noinitrd init=/sbin/init >>> mini2440=1b nfsrootdebug root=/dev/nfs rw >>> nfsroot=10.146.1.21:/home/open-nandra/rootfs >>> ip=10.146.1.199:10.146.1.21::255.20 >>> PID hash table entries: 256 (order: -2, 1024 bytes) >>> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) >>> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) >>> Memory: 64MB = 64MB total >>> Memory: 60536k/60536k available, 5000k reserved, 0K highmem >>> Virtual kernel memory layout: >>> vector : 0xffff0000 - 0xffff1000 ( 4 kB) >>> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >>> DMA : 0xffc00000 - 0xffe00000 ( 2 MB) >>> vmalloc : 0xc4800000 - 0xf6000000 ( 792 MB) >>> lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) >>> modules : 0xbf000000 - 0xc0000000 ( 16 MB) >>> .init : 0xc0008000 - 0xc0029000 ( 132 kB) >>> .text : 0xc0029000 - 0xc03e9bb4 (3843 kB) >>> .data : 0xc03ea000 - 0xc040e220 ( 145 kB) >>> SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 >>> NR_IRQS:85 >>> irq: clearing pending status 02000000 >>> irq: clearing subpending status 00000002 >>> Console: colour dummy device 80x30 >>> console [ttySAC0] enabled >>> Calibrating delay loop... 201.93 BogoMIPS (lpj=504832) >>> pid_max: default: 32768 minimum: 301 >>> Mount-cache hash table entries: 512 >>> CPU: Testing write buffer coherency: ok >>> gpiochip_add: gpios 288..303 (GPIOK) failed to register >>> gpiochip_add: gpios 320..334 (GPIOL) failed to register >>> gpiochip_add: gpios 352..353 (GPIOM) failed to register >>> NET: Registered protocol family 16 >>> MINI2440: Option string mini2440=1b >>> MINI2440: LCD 0:240x320 [1:800x480] 2:1024x768 >>> S3C2440: Initialising architecture >>> S3C2440: IRQ Support >>> S3C244X: Clock Support, DVS off >>> bio: create slab at 0 >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> s3c-i2c s3c2440-i2c: slave address 0x10 >>> s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz >>> s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter >>> Advanced Linux Sound Architecture Driver Version 1.0.23. >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>> TCP established hash table entries: 2048 (order: 2, 16384 bytes) >>> TCP bind hash table entries: 2048 (order: 1, 8192 bytes) >>> TCP: Hash tables configured (established 2048 bind 2048) >>> TCP reno registered >>> UDP hash table entries: 256 (order: 0, 4096 bytes) >>> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >>> NET: Registered protocol family 1 >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>> JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. >>> ROMFS MTD (C) 2007 Red Hat, Inc. >>> msgmni has been set to 118 >>> io scheduler noop registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> Console: switching to colour frame buffer device 200x80 >>> fb0: s3c2410fb frame buffer device >>> s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 >>> s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 >>> s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 >>> brd: module loaded >>> at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write >>> S3C24XX NAND Driver, (c) 2004 Simtec Electronics >>> s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns >>> s3c24xx-nand s3c2440-nand: NAND soft ECC >>> NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB >>> 3,3V 8-bit) >>> Creating 4 MTD partitions on "nand": >>> 0x000000000000-0x000000040000 : "u-boot" >>> ftl_cs: FTL header not found. >>> 0x000000040000-0x000000060000 : "u-boot-env" >>> ftl_cs: FTL header not found. >>> 0x000000060000-0x000000560000 : "kernel" >>> ftl_cs: FTL header not found. >>> 0x000000560000-0x000010000000 : "root" >>> ftl_cs: FTL header not found. >>> dm9000 Ethernet Driver, V1.31 >>> eth0: dm9000e at c486a300,c486e304 IRQ 51 MAC: 08:08:11:18:12:27 (chip) >>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> s3c2410-ohci s3c2410-ohci: S3C24XX OHCI >>> s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 >>> s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 2 ports detected >>> usbcore: registered new interface driver libusual >>> s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes >>> mousedev: PS/2 mouse device common for all mice >>> input: gpio-keys as /devices/platform/gpio-keys/input/input0 >>> S3C24XX RTC, (c) 2004,2006 Simtec Electronics >>> s3c-rtc s3c2410-rtc: rtc disabled, re-enabling >>> s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 >>> i2c /dev entries driver >>> S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics >>> s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled >>> cpuidle: using governor ladder >>> sdhci: Secure Digital Host Controller Interface driver >>> sdhci: Copyright(c) Pierre Ossman >>> s3c-sdi s3c2440-sdi: powered down. >>> s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ >>> s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> usbcore: registered new interface driver usbhid >>> usbhid: USB HID core driver >>> ALSA device list: >>> No soundcards found. >>> TCP cubic registered >>> NET: Registered protocol family 17 >>> Registering the dns_resolver key type >>> s3c-rtc s3c2410-rtc: setting system clock to 2011-03-23 06:01:06 UTC >>> (1300860066) >>> s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). >>> s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz). >>> s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz). >>> mmc0: new SD card at address b368 >>> mmcblk0: mmc0:b368 SD 970 MiB >>> mmcblk0: p1 p2 p3 >>> eth0: link down >>> IP-Config: Complete: >>> device=eth0, addr=10.146.1.199, mask=255.255.255.0, gw=255.255.255.255, >>> host=mini2440, domain=, nis-domain=(none), >>> bootserver=10.146.1.21, rootserver=10.146.1.21, rootpath= >>> Root-NFS: nfsroot=/home/open-nandra/rootfs >>> NFS: nfs mount opts='udp,nolock,addr=10.146.1.21' >>> NFS: parsing nfs mount option 'udp' >>> NFS: parsing nfs mount option 'nolock' >>> NFS: parsing nfs mount option 'addr=10.146.1.21' >>> NFS: MNTPATH: '/home/open-nandra/rootfs' >>> NFS: sending MNT request for 10.146.1.21:/home/open-nandra/rootfs >>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >>> NFS: received 1 auth flavors >>> NFS: auth flavor[0]: 1 >>> NFS: MNT request succeeded >>> NFS: using auth flavor 1 >>> VFS: Mounted root (nfs filesystem) on device 0:14. >>> Freeing init memory: 132K >>> nfs: server 10.146.1.21 not responding, still trying >>> nfs: server 10.146.1.21 not responding, still trying >>> >>> This is behavior for commit 53d4737580535e073963b91ce87d4216e434fab5 >>> For commit before it works properly. >> >> What does "rpcinfo -p 10.146.1.21" output look like? Is NFS over UDP enabled on your server? > program vers proto port > 100000 2 tcp 111 portmapper > 100000 2 udp 111 portmapper > 100024 1 udp 40517 status > 100024 1 tcp 51397 status > 100021 1 udp 44516 nlockmgr > 100021 3 udp 44516 nlockmgr > 100021 4 udp 44516 nlockmgr > 100021 1 tcp 55152 nlockmgr > 100021 3 tcp 55152 nlockmgr > 100021 4 tcp 55152 nlockmgr > 100003 2 tcp 2049 nfs > 100003 3 tcp 2049 nfs > 100003 4 tcp 2049 nfs > 100227 2 tcp 2049 > 100227 3 tcp 2049 > 100003 2 udp 2049 nfs > 100003 3 udp 2049 nfs > 100003 4 udp 2049 nfs > 100227 2 udp 2049 > 100227 3 udp 2049 > 100005 1 udp 58278 mountd > 100005 1 tcp 37178 mountd > 100005 2 udp 58278 mountd > 100005 2 tcp 37178 mountd > 100005 3 udp 58278 mountd > 100005 3 tcp 37178 mountd Can you boot if you specify either the "tcp" or "proto=tcp" NFSROOT mount options? Perhaps a network trace would be probative. Capture on the server with "tcpdump -s0 -w /tmp/foo ip 10.146.1.199" (untested, but I think you get the idea) while the client is attempting to boot, and post. -- Chuck Lever chuck[dot]lever[at]oracle[dot]com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/