Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 16 Jul 2002 13:28:49 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 16 Jul 2002 13:28:49 -0400 Received: from host.greatconnect.com ([209.239.40.135]:64773 "EHLO host.greatconnect.com") by vger.kernel.org with ESMTP id ; Tue, 16 Jul 2002 13:28:47 -0400 Subject: Re: Problems with Promise PDC 20265 and 2.4.19-rc1 From: Samuel Flory To: Ernst Lehmann Cc: linux-kernel In-Reply-To: <1026818162.1039.19.camel@hadley> References: <1026818162.1039.19.camel@hadley> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 (1.0.3-6) Date: 16 Jul 2002 10:31:08 -0700 Message-Id: <1026840669.2294.2723.camel@flory.corp.rackablelabs.com> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2525 Lines: 86 Have you tried 2.4.19-rc1-ac(whatever # it is today)? On Tue, 2002-07-16 at 04:16, Ernst Lehmann wrote: > Hi, > > sorry, if this has been asked before, but I could not find any in the > archives. > > I have a Gigabyte GA7DXR with a onboard Promise PDC20265 IDE-Controller. > > Attached to this Controller are 4 Maxtor 120 GB Disks. > > Booting with 2.4.18 works fine. The partitons of the disk are detecded, > and I can access them. > > Booting with 2.4.19-rc1 hangs on bootup. > > The Promise is detected correctly. > > But when it comes to the partition-check the systems hangs: > > looks like this: > > ------snippel------- > PDC20265: chipset revision 2 > PDC20265: not 100% native mode: will probe irqs later > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. > ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio > ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:DMA, hdh:DMA > hda: IBM-DHEA-36481, ATA DISK drive > hde: Maxtor 4G120J6, ATA DISK drive > hdf: Maxtor 4G120J6, ATA DISK drive > hdg: Maxtor 4G120J6, ATA DISK drive > hdh: Maxtor 4G120J6, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide2 at 0xb800-0xb807,0xbc02 on irq 11 > ide3 at 0xc000-0xc007,0xc402 on irq 11 > hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33) > hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, > UDMA(100) > hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, > UDMA(100) > hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, > UDMA(100) > hdh: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, > UDMA(100) > Partition check: > hda: hda1 hda2 hda3 > hde: > > -------------- > > And here it hangs > > > Because the patch between 2.4.18 and 2.4.19-rc1 is very big, there seem > to be a lot of changes. > > > Thanks in andvance for any help..... > > > > > -- > > Bye > > Ernst > --------- > Ernst Lehmann Email: lehmann@acheron.franken.de > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/