Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932192Ab1C3JSH (ORCPT ); Wed, 30 Mar 2011 05:18:07 -0400 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:51157 "EHLO localhost.localdomain" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932176Ab1C3JSB (ORCPT ); Wed, 30 Mar 2011 05:18:01 -0400 From: Alan Cox Subject: [PATCH 02/18] gma500: Add moorestown lvds driver code To: greg@kroah.com, linux-kernel@vger.kernel.org Date: Wed, 30 Mar 2011 09:59:17 +0100 Message-ID: <20110330085913.5897.52373.stgit@localhost.localdomain> In-Reply-To: <20110330085539.5897.67919.stgit@localhost.localdomain> References: <20110330085539.5897.67919.stgit@localhost.localdomain> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31051 Lines: 1017 Add the new files needed for the GMA500 driver to support Moorestown LVDS displays. Don't wire them in yet. Signed-off-by: Alan Cox --- drivers/staging/gma500/mrst_crtc.c | 623 ++++++++++++++++++++++++++++++++++++ drivers/staging/gma500/mrst_lvds.c | 364 +++++++++++++++++++++ 2 files changed, 987 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/gma500/mrst_crtc.c create mode 100644 drivers/staging/gma500/mrst_lvds.c diff --git a/drivers/staging/gma500/mrst_crtc.c b/drivers/staging/gma500/mrst_crtc.c new file mode 100644 index 0000000..89b9cac --- /dev/null +++ b/drivers/staging/gma500/mrst_crtc.c @@ -0,0 +1,623 @@ +/* + * Copyright © 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include + +#include +#include "psb_fb.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_intel_display.h" +#include "psb_powermgmt.h" + +struct psb_intel_range_t { + int min, max; +}; + +struct mrst_limit_t { + struct psb_intel_range_t dot, m, p1; +}; + +struct mrst_clock_t { + /* derived values */ + int dot; + int m; + int p1; +}; + +#define MRST_LIMIT_LVDS_100L 0 +#define MRST_LIMIT_LVDS_83 1 +#define MRST_LIMIT_LVDS_100 2 + +#define MRST_DOT_MIN 19750 +#define MRST_DOT_MAX 120000 +#define MRST_M_MIN_100L 20 +#define MRST_M_MIN_100 10 +#define MRST_M_MIN_83 12 +#define MRST_M_MAX_100L 34 +#define MRST_M_MAX_100 17 +#define MRST_M_MAX_83 20 +#define MRST_P1_MIN 2 +#define MRST_P1_MAX_0 7 +#define MRST_P1_MAX_1 8 + +static const struct mrst_limit_t mrst_limits[] = { + { /* MRST_LIMIT_LVDS_100L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + }, + { /* MRST_LIMIT_LVDS_83L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0}, + }, + { /* MRST_LIMIT_LVDS_100 */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + }, +}; + +#define MRST_M_MIN 10 +static const u32 mrst_m_converts[] = { + 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C, + 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25, + 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c, +}; + +static const struct mrst_limit_t *mrst_limit(struct drm_crtc *crtc) +{ + const struct mrst_limit_t *limit = NULL; + struct drm_device *dev = crtc->dev; + DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private; + + if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) + || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) { + switch (dev_priv->core_freq) { + case 100: + limit = &mrst_limits[MRST_LIMIT_LVDS_100L]; + break; + case 166: + limit = &mrst_limits[MRST_LIMIT_LVDS_83]; + break; + case 200: + limit = &mrst_limits[MRST_LIMIT_LVDS_100]; + break; + } + } else { + limit = NULL; + PSB_DEBUG_ENTRY("mrst_limit Wrong display type.\n"); + } + + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ +static void mrst_clock(int refclk, struct mrst_clock_t *clock) +{ + clock->dot = (refclk * clock->m) / (14 * clock->p1); +} + +void mrstPrintPll(char *prefix, struct mrst_clock_t *clock) +{ + PSB_DEBUG_ENTRY("%s: dotclock = %d, m = %d, p1 = %d.\n", + prefix, clock->dot, clock->m, clock->p1); +} + +/** + * Returns a set of divisors for the desired target clock with the given refclk, + * or FALSE. Divisor values are the actual divisors for + */ +static bool +mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk, + struct mrst_clock_t *best_clock) +{ + struct mrst_clock_t clock; + const struct mrst_limit_t *limit = mrst_limit(crtc); + int err = target; + + memset(best_clock, 0, sizeof(*best_clock)); + + for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { + for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; + clock.p1++) { + int this_err; + + mrst_clock(refclk, &clock); + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + DRM_DEBUG("mrstFindBestPLL err = %d.\n", err); + + return err != target; +} + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void mrst_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + int pipe = psb_intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + bool enabled; + + PSB_DEBUG_ENTRY("mode = %d, pipe = %d\n", mode, pipe); + + if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND, + OSPM_UHB_FORCE_POWER_ON)) + return; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable the DPLL */ + temp = REG_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE(dpll_reg, temp); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + /* Enable the pipe */ + temp = REG_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + /* Enable the plane */ + temp = REG_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(dspcntr_reg, + temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); + } + + psb_intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable + if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, true); TODO */ + break; + case DRM_MODE_DPMS_OFF: + /* Give the overlay scaler a chance to disable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + /* Disable display plane */ + temp = REG_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(dspcntr_reg, + temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); + REG_READ(dspbase_reg); + } + + /* Next, disable display pipes */ + temp = REG_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + REG_READ(pipeconf_reg); + } + /* Wait for for the pipe disable to take effect. */ + psb_intel_wait_for_vblank(dev); + + temp = REG_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; + + /*Set FIFO Watermarks*/ + REG_WRITE(DSPARB, 0x3FFF); + REG_WRITE(DSPFW1, 0x3F88080A); + REG_WRITE(DSPFW2, 0x0b060808); + REG_WRITE(DSPFW3, 0x0); + REG_WRITE(DSPFW4, 0x08030404); + REG_WRITE(DSPFW5, 0x04040404); + REG_WRITE(DSPFW6, 0x78); + REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000); + /* Must write Bit 14 of the Chicken Bit Register */ + + ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND); +} + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int mrst_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + return (pfit_control >> 29) & 3; +} + +static int mrst_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private; + int pipe = psb_intel_crtc->pipe; + int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk = 0; + struct mrst_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + bool is_mipi = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct psb_intel_output *psb_intel_output = NULL; + uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; + struct drm_encoder *encoder; + + PSB_DEBUG_ENTRY("pipe = 0x%x\n", pipe); + + if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND, + OSPM_UHB_FORCE_POWER_ON)) + return 0; + + memcpy(&psb_intel_crtc->saved_mode, + mode, + sizeof(struct drm_display_mode)); + memcpy(&psb_intel_crtc->saved_adjusted_mode, + adjusted_mode, + sizeof(struct drm_display_mode)); + + list_for_each_entry(encoder, &mode_config->encoder_list, head) { + + if (encoder->crtc != crtc) + continue; + + psb_intel_output = enc_to_psb_intel_output(encoder); + switch (psb_intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + case INTEL_OUTPUT_MIPI: + is_mipi = true; + break; + } + } + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable the panel fitter if it was on our pipe */ + if (mrst_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + REG_WRITE(pipesrc_reg, + ((mode->crtc_hdisplay - 1) << 16) | + (mode->crtc_vdisplay - 1)); + + if (psb_intel_output) + drm_connector_property_get_value(&psb_intel_output->base, + dev->mode_config.scaling_mode_property, &scalingType); + + if (scalingType == DRM_MODE_SCALE_NO_SCALE) { + /* Moorestown doesn't have register support for centering so + * we need to mess with the h/vblank and h/vsync start and + * ends to get centering */ + int offsetX = 0, offsetY = 0; + + offsetX = (adjusted_mode->crtc_hdisplay - + mode->crtc_hdisplay) / 2; + offsetY = (adjusted_mode->crtc_vdisplay - + mode->crtc_vdisplay) / 2; + + REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(hblank_reg, + (adjusted_mode->crtc_hblank_start - offsetX - 1) | + ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16)); + REG_WRITE(hsync_reg, + (adjusted_mode->crtc_hsync_start - offsetX - 1) | + ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16)); + REG_WRITE(vblank_reg, + (adjusted_mode->crtc_vblank_start - offsetY - 1) | + ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16)); + REG_WRITE(vsync_reg, + (adjusted_mode->crtc_vsync_start - offsetY - 1) | + ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16)); + } else { + REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + } + + /* Flush the plane changes */ + { + struct drm_crtc_helper_funcs *crtc_funcs = + crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + /* setup pipeconf */ + pipeconf = REG_READ(pipeconf_reg); + + /* Set up the display plane register */ + dspcntr = REG_READ(dspcntr_reg); + dspcntr |= DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE; + dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE; + + if (is_mipi) + goto mrst_crtc_mode_set_exit; + + refclk = dev_priv->core_freq * 1000; + + dpll = 0; /*BIT16 = 0 for 100MHz reference */ + + ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock); + + if (!ok) { + PSB_DEBUG_ENTRY( + "mrstFindBestPLL fail in mrst_crtc_mode_set.\n"); + } else { + PSB_DEBUG_ENTRY("mrst_crtc_mode_set pixel clock = %d," + "m = %x, p1 = %x.\n", clock.dot, clock.m, + clock.p1); + } + + fp = mrst_m_converts[(clock.m - MRST_M_MIN)] << 8; + + dpll |= DPLL_VGA_MODE_DIS; + + + dpll |= DPLL_VCO_ENABLE; + + if (is_lvds) + dpll |= DPLLA_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + + if (is_sdvo) { + int sdvo_pixel_multiply = + adjusted_mode->clock / mode->clock; + + dpll |= DPLL_DVO_HIGH_SPEED; + dpll |= + (sdvo_pixel_multiply - + 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 2)) << 17; + + dpll |= DPLL_VCO_ENABLE; + + mrstPrintPll("chosen", &clock); + + if (dpll & DPLL_VCO_ENABLE) { + REG_WRITE(fp_reg, fp); + REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + REG_READ(dpll_reg); + /* Check the DPLLA lock bit PIPEACONF[29] */ + udelay(150); + } + + REG_WRITE(fp_reg, fp); + REG_WRITE(dpll_reg, dpll); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + /* write it again -- the BIOS does, after all */ + REG_WRITE(dpll_reg, dpll); + REG_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + REG_WRITE(pipeconf_reg, pipeconf); + REG_READ(pipeconf_reg); + psb_intel_wait_for_vblank(dev); + + REG_WRITE(dspcntr_reg, dspcntr); + psb_intel_wait_for_vblank(dev); + +mrst_crtc_mode_set_exit: + ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND); + return 0; +} + +static bool mrst_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +int mrst_pipe_set_base(struct drm_crtc *crtc, + int x, int y, struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + /* struct drm_i915_master_private *master_priv; */ + struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); + struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); + struct psb_intel_mode_device *mode_dev = psb_intel_crtc->mode_dev; + int pipe = psb_intel_crtc->pipe; + unsigned long Start, Offset; + /* FIXME: check if we need this surely MRST is pipe 0 only */ + int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + u32 dspcntr; + int ret = 0; + + PSB_DEBUG_ENTRY("\n"); + + /* no fb bound */ + if (!crtc->fb) { + DRM_DEBUG("No FB bound\n"); + return 0; + } + + if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND, + OSPM_UHB_FORCE_POWER_ON)) + return 0; + + Start = mode_dev->bo_offset(dev, psbfb); + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + + REG_WRITE(dspstride, crtc->fb->pitch); + + dspcntr = REG_READ(dspcntr_reg); + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + DRM_ERROR("Unknown color depth\n"); + ret = -EINVAL; + goto pipe_set_base_exit; + } + REG_WRITE(dspcntr_reg, dspcntr); + + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + if (0 /* FIXMEAC - check what PSB needs */) { + REG_WRITE(dspbase, Offset); + REG_READ(dspbase); + REG_WRITE(dspsurf, Start); + REG_READ(dspsurf); + } else { + REG_WRITE(dspbase, Start + Offset); + REG_READ(dspbase); + } + +pipe_set_base_exit: + ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND); + return ret; +} + +static void mrst_crtc_prepare(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void mrst_crtc_commit(struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +const struct drm_crtc_helper_funcs mrst_helper_funcs = { + .dpms = mrst_crtc_dpms, + .mode_fixup = mrst_crtc_mode_fixup, + .mode_set = mrst_crtc_mode_set, + .mode_set_base = mrst_pipe_set_base, + .prepare = mrst_crtc_prepare, + .commit = mrst_crtc_commit, +}; + diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c new file mode 100644 index 0000000..4628b01 --- /dev/null +++ b/drivers/staging/gma500/mrst_lvds.c @@ -0,0 +1,364 @@ +/* + * Copyright © 2006-2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Authors: + * Eric Anholt + * Dave Airlie + * Jesse Barnes + */ + +#include +#include + +#include "psb_intel_bios.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_powermgmt.h" +#include + +/* The max/min PWM frequency in BPCR[31:17] - */ +/* The smallest number is 1 (not 0) that can fit in the + * 15-bit field of the and then*/ +/* shifts to the left by one bit to get the actual 16-bit + * value that the 15-bits correspond to.*/ +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BRIGHTNESS_MAX_LEVEL 100 + +/** + * Sets the power state for the panel. + */ +static void mrst_lvds_set_power(struct drm_device *dev, + struct psb_intel_output *output, bool on) +{ + u32 pp_status; + DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private; + PSB_DEBUG_ENTRY("\n"); + + if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND, + OSPM_UHB_FORCE_POWER_ON)) + return; + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); + dev_priv->is_lvds_on = true; + } else { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + dev_priv->is_lvds_on = false; + pm_request_idle(&dev->pdev->dev); + } + + ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND); +} + +static void mrst_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + + PSB_DEBUG_ENTRY("\n"); + + if (mode == DRM_MODE_DPMS_ON) + mrst_lvds_set_power(dev, output, true); + else + mrst_lvds_set_power(dev, output, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void mrst_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct psb_intel_mode_device *mode_dev = + enc_to_psb_intel_output(encoder)->mode_dev; + struct drm_device *dev = encoder->dev; + u32 lvds_port; + uint64_t v = DRM_MODE_SCALE_FULLSCREEN; + + PSB_DEBUG_ENTRY("\n"); + + if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND, + OSPM_UHB_FORCE_POWER_ON)) + return; + + /* + * The LVDS pin pair will already have been turned on in the + * psb_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + lvds_port = (REG_READ(LVDS) & + (~LVDS_PIPEB_SELECT)) | + LVDS_PORT_EN | + LVDS_BORDER_EN; + + if (mode_dev->panel_wants_dither) + lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(LVDS, lvds_port); + + drm_connector_property_get_value( + &enc_to_psb_intel_output(encoder)->base, + dev->mode_config.scaling_mode_property, + &v); + + if (v == DRM_MODE_SCALE_NO_SCALE) + REG_WRITE(PFIT_CONTROL, 0); + else if (v == DRM_MODE_SCALE_ASPECT) { + if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || + (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { + if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == + (mode->hdisplay * adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + else if ((adjusted_mode->crtc_hdisplay * + mode->vdisplay) > (mode->hdisplay * + adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_PILLARBOX); + else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_LETTERBOX); + } else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + + ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND); +} + + +static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = { + .dpms = mrst_lvds_dpms, + .mode_fixup = psb_intel_lvds_mode_fixup, + .prepare = psb_intel_lvds_prepare, + .mode_set = mrst_lvds_mode_set, + .commit = psb_intel_lvds_commit, +}; + +static struct drm_display_mode lvds_configuration_modes[] = { + /* hard coded fixed mode for TPO LTPS LPJ040K001A */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836, + 846, 1056, 0, 480, 489, 491, 525, 0, 0) }, + /* hard coded fixed mode for LVDS 800x480 */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801, + 802, 1024, 0, 480, 481, 482, 525, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072, + 1104, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104, + 1136, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124, + 1204, 1312, 0, 600, 607, 610, 621, 0, 0) }, + /* hard coded fixed mode for LVDS 1024x768 */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, 0) }, + /* hard coded fixed mode for LVDS 1366x768 */ + { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430, + 1558, 1664, 0, 768, 769, 770, 776, 0, 0) }, +}; + +/* Returns the panel fixed mode from configuration. */ + +static struct drm_display_mode * +mrst_lvds_get_configuration_mode(struct drm_device *dev) +{ + struct drm_display_mode *mode = NULL; + struct drm_psb_private *dev_priv = dev->dev_private; + struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; + + if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/ + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; + mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; + mode->hsync_start = mode->hdisplay + \ + ((ti->hsync_offset_hi << 8) | \ + ti->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + \ + ((ti->hsync_pulse_width_hi << 8) | \ + ti->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ + ti->hblank_lo); + mode->vsync_start = \ + mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ + ti->vsync_offset_lo); + mode->vsync_end = \ + mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ + ti->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + \ + ((ti->vblank_hi << 8) | ti->vblank_lo); + mode->clock = ti->pixel_clock * 10; +#if 0 + printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay); + printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay); + printk(KERN_INFO "HSS is %d\n", mode->hsync_start); + printk(KERN_INFO "HSE is %d\n", mode->hsync_end); + printk(KERN_INFO "htotal is %d\n", mode->htotal); + printk(KERN_INFO "VSS is %d\n", mode->vsync_start); + printk(KERN_INFO "VSE is %d\n", mode->vsync_end); + printk(KERN_INFO "vtotal is %d\n", mode->vtotal); + printk(KERN_INFO "clock is %d\n", mode->clock); +#endif + } else + mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]); + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +/** + * mrst_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void mrst_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct psb_intel_output *psb_intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_psb_private *dev_priv = + (struct drm_psb_private *) dev->dev_private; + struct edid *edid; + int ret = 0; + struct i2c_adapter *i2c_adap; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + + PSB_DEBUG_ENTRY("\n"); + + psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); + if (!psb_intel_output) + return; + + psb_intel_output->mode_dev = mode_dev; + connector = &psb_intel_output->base; + encoder = &psb_intel_output->enc; + dev_priv->is_lvds_on = true; + drm_connector_init(dev, &psb_intel_output->base, + &psb_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + drm_mode_connector_attach_encoder(&psb_intel_output->base, + &psb_intel_output->enc); + psb_intel_output->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &mrst_lvds_helper_funcs); + drm_connector_helper_add(connector, + &psb_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_connector_attach_property(connector, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_connector_attach_property(connector, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + mode_dev->panel_wants_dither = false; + if (dev_priv->vbt_data.size != 0x00) + mode_dev->panel_wants_dither = (dev_priv->gct_data. + Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + i2c_adap = i2c_get_adapter(2); + if (i2c_adap == NULL) + printk(KERN_ALERT "No ddc adapter available!\n"); + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + if (i2c_adap) { + edid = drm_get_edid(connector, i2c_adap); + if (edid) { + drm_mode_connector_update_edid_property(connector, + edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + } + + /* + * If we didn't get EDID, try geting panel timing + * from configuration data + */ + mode_dev->panel_fixed_mode = mrst_lvds_get_configuration_mode(dev); + + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + DRM_DEBUG + ("Found no modes on the lvds, ignoring the LVDS\n"); + goto failed_find; + } + +out: + drm_sysfs_connector_add(connector); + return; + +failed_find: + DRM_DEBUG("No LVDS modes found, disabling.\n"); + if (psb_intel_output->ddc_bus) + psb_intel_i2c_destroy(psb_intel_output->ddc_bus); + +/* failed_ddc: */ + + drm_encoder_cleanup(encoder); + drm_connector_cleanup(connector); + kfree(connector); +} + -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/