Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932968Ab1C3RBl (ORCPT ); Wed, 30 Mar 2011 13:01:41 -0400 Received: from mail-pv0-f174.google.com ([74.125.83.174]:49582 "EHLO mail-pv0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932932Ab1C3RBh (ORCPT ); Wed, 30 Mar 2011 13:01:37 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=GarINmMS3s2HHJLZ824g1dphcyQjYMXpP9Q+mPvgPJswQAwcMDmHDEUhe4qegsgpS7 tFXn6K7kOSJ2JTdtcYiV56aTqtdAACf6ns8wuDsU55irj5d4ZfjZ9PY5X6q+DD8WZ/e1 UrUSvX4pYStjzSW0B2/jbwoAcZiGGIDy6PAvA= From: "Justin P. Mattock" To: trivial@kernel.org Cc: linux-kernel@vger.kernel.org, "Justin P. Mattock" Subject: [PATCH 4/5]remove one to many ttt's. Date: Wed, 30 Mar 2011 10:01:17 -0700 Message-Id: <1301504478-3450-4-git-send-email-justinmattock@gmail.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1301504478-3450-1-git-send-email-justinmattock@gmail.com> References: <1301504478-3450-1-git-send-email-justinmattock@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9753 Lines: 230 The patch below removes one to many ttt's in some comments. Signed-off-by: Justin P. Mattock --- arch/ia64/hp/common/sba_iommu.c | 2 +- drivers/firmware/efivars.c | 2 +- drivers/macintosh/therm_pm72.c | 4 ++-- drivers/media/dvb/dvb-usb/dw2102.c | 2 +- drivers/message/i2o/README.ioctl | 2 +- drivers/net/s2io.c | 2 +- drivers/net/ucc_geth_ethtool.c | 2 +- drivers/net/usb/usbnet.c | 2 +- drivers/scsi/lpfc/lpfc_hw.h | 2 +- drivers/tty/n_gsm.c | 2 +- drivers/usb/host/imx21-dbg.c | 2 +- drivers/usb/misc/usbtest.c | 2 +- fs/nfsd/stats.c | 2 +- fs/xfs/xfs_inode.c | 2 +- include/linux/posix-clock.h | 2 +- 15 files changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 4ce8d13..ab3ccab 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, /* ** Address does not fall w/in IOVA, must be bypassing */ - DBG_BYPASS("sba_unmap_single_atttrs() bypass addr: 0x%lx\n", + DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n", iova); #ifdef ENABLE_MARK_CLEAN diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index ff0c373..5629a0c 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf) /* * Generic read/write functions that call the specific functions of - * the atttributes... + * the attributes... */ static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index bca2af2..7cd50bf 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -44,11 +44,11 @@ * TODO: - Check MPU structure version/signature * - Add things like /sbin/overtemp for non-critical * overtemp conditions so userland can take some policy - * decisions, like slewing down CPUs + * decisions, like slowing down CPUs * - Deal with fan and i2c failures in a better way * - Maybe do a generic PID based on params used for * U3 and Drives ? Definitely need to factor code a bit - * bettter... also make sensor detection more robust using + * better... also make sensor detection more robust using * the device-tree to probe for them * - Figure out how to get the slots consumption and set the * slots fan accordingly diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index f5b9da1..d312323 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = { { 0x0f, KEY_BLUE }, /* bottom yellow button */ { 0x14, KEY_AUDIO }, /* Snapshot */ { 0x38, KEY_TV }, /* TV/Radio */ - { 0x0c, KEY_ESC } /* upper Red buttton */ + { 0x0c, KEY_ESC } /* upper Red button */ }; static struct rc_map_dvb_usb_table_table keys_tables[] = { diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl index 65c0c47..5fb195af4 100644 --- a/drivers/message/i2o/README.ioctl +++ b/drivers/message/i2o/README.ioctl @@ -110,7 +110,7 @@ V. Getting Logical Configuration Table ENOBUFS Buffer not large enough. If this occurs, the required buffer length is written into *(lct->reslen) -VI. Settting Parameters +VI. Setting Parameters SYNOPSIS diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 356e74d..8874914 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io) /* As per the HW requirement we need to replenish the * receive buffer to avoid the ring bump. Since there is * no intention of processing the Rx frame at this pointwe are - * just settting the ownership bit of rxd in Each Rx + * just setting the ownership bit of rxd in Each Rx * ring to HW and set the appropriate buffer size * based on the ring mode */ diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 6f92e48..cfd8881 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -6,7 +6,7 @@ * Author: Li Yang * * Limitation: - * Can only get/set setttings of the first queue. + * Can only get/set settings of the first queue. * Need to re-open the interface manually after changing some parameters. * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 95c41d5..1919a6d 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) /* take the first altsetting with in-bulk + out-bulk; * remember any status endpoint, just in case; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 95f11ed..86b6f7e 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */ #define SLI_MGMT_GRPL 0x102 /* Get registered Port list */ #define SLI_MGMT_GPAT 0x110 /* Get Port attributes */ #define SLI_MGMT_RHBA 0x200 /* Register HBA */ -#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */ +#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */ #define SLI_MGMT_RPRT 0x210 /* Register Port */ #define SLI_MGMT_RPA 0x211 /* Register Port attributes */ #define SLI_MGMT_DHBA 0x300 /* De-register HBA */ diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 176f632..be75b95 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2124,7 +2124,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) /** * gsmld_detach_gsm - stop doing 0710 mux - * @tty: tty atttached to the mux + * @tty: tty attached to the mux * @gsm: mux * * Shutdown and then clean up the resources used by the line discipline diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index 512f647..6d75334 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s, seq_printf(s, "%s %d:\n" "cc=0X%02X\n" "scheduled frame %d (%d)\n" - "submittted frame %d (%d)\n" + "submitted frame %d (%d)\n" "completed frame %d (%d)\n" "requested length=%d\n" "completed length=%d\n\n", diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 388cc12..ff9a01f 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) alt = intf->altsetting + tmp; /* take the first altsetting with in-bulk + out-bulk; - * ignore other endpoints and altsetttings. + * ignore other endpoints and altsettings. */ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; diff --git a/fs/nfsd/stats.c b/fs/nfsd/stats.c index 5232d3e..a2e2402 100644 --- a/fs/nfsd/stats.c +++ b/fs/nfsd/stats.c @@ -8,7 +8,7 @@ * Statistsics for the reply cache * fh * statistics for filehandle lookup - * io + * io * statistics for IO throughput * th <10%-20%> <20%-30%> ... <90%-100%> <100%> * time (seconds) when nfsd thread usage above thresholds diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 742c833..8f335b1 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1470,7 +1470,7 @@ xfs_itruncate_finish( * file but the log buffers containing the free and reallocation * don't, then we'd end up with garbage in the blocks being freed. * As long as we make the new_size permanent before actually - * freeing any blocks it doesn't matter if they get writtten to. + * freeing any blocks it doesn't matter if they get written to. * * The callers must signal into us whether or not the size * setting here must be synchronous. There are a few cases diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h index 369e19d..29ff1fa 100644 --- a/include/linux/posix-clock.h +++ b/include/linux/posix-clock.h @@ -44,7 +44,7 @@ struct posix_clock; * @timer_create: Create a new timer * @timer_delete: Remove a previously created timer * @timer_gettime: Get remaining time and interval of a timer - * @timer_setttime: Set a timer's initial expiration and interval + * @timer_settime: Set a timer's initial expiration and interval * @fasync: Optional character device fasync method * @mmap: Optional character device mmap method * @open: Optional character device open method -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/