Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757593Ab1DAOpA (ORCPT ); Fri, 1 Apr 2011 10:45:00 -0400 Received: from e28smtp07.in.ibm.com ([122.248.162.7]:50296 "EHLO e28smtp07.in.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757066Ab1DAOo6 (ORCPT ); Fri, 1 Apr 2011 10:44:58 -0400 From: Srikar Dronamraju To: Peter Zijlstra , Ingo Molnar Cc: Steven Rostedt , Srikar Dronamraju , Linux-mm , Arnaldo Carvalho de Melo , Linus Torvalds , Masami Hiramatsu , Ananth N Mavinakayanahalli , Christoph Hellwig , Andi Kleen , Thomas Gleixner , Jonathan Corbet , Oleg Nesterov , Andrew Morton , Jim Keniston , Roland McGrath , SystemTap , LKML Date: Fri, 01 Apr 2011 20:05:17 +0530 Message-Id: <20110401143517.15455.88373.sendpatchset@localhost6.localdomain6> In-Reply-To: <20110401143223.15455.19844.sendpatchset@localhost6.localdomain6> References: <20110401143223.15455.19844.sendpatchset@localhost6.localdomain6> Subject: [PATCH v3 2.6.39-rc1-tip 14/26] 14: x86: x86 specific probe handling Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8190 Lines: 241 Provides x86 specific implementations for setting the current instruction pointer, pre single-step and post-singlestep handling, enabling and disabling singlestep. This patch also introduces TIF_UPROBE which is set by uprobes notifier code. TIF_UPROBE indicates that there is pending work that needs to be done at do_notify_resume time. Signed-off-by: Srikar Dronamraju --- arch/x86/include/asm/thread_info.h | 2 arch/x86/include/asm/uprobes.h | 5 + arch/x86/kernel/uprobes.c | 171 ++++++++++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+), 0 deletions(-) diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 1f2e61e..2dc1921 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -84,6 +84,7 @@ struct thread_info { #define TIF_SECCOMP 8 /* secure computing */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_USER_RETURN_NOTIFY 11 /* notify kernel of userspace return */ +#define TIF_UPROBE 12 /* breakpointed or singlestepping */ #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ @@ -107,6 +108,7 @@ struct thread_info { #define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY) +#define _TIF_UPROBE (1 << TIF_UPROBE) #define _TIF_NOTSC (1 << TIF_NOTSC) #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h index e38950f..0c9c8b6 100644 --- a/arch/x86/include/asm/uprobes.h +++ b/arch/x86/include/asm/uprobes.h @@ -44,4 +44,9 @@ struct uprobe_task_arch_info {}; #endif struct uprobe; extern int analyze_insn(struct task_struct *tsk, struct uprobe *uprobe); +extern void set_ip(struct pt_regs *regs, unsigned long vaddr); +extern int pre_xol(struct uprobe *uprobe, struct pt_regs *regs); +extern int post_xol(struct uprobe *uprobe, struct pt_regs *regs); +extern void arch_uprobe_enable_sstep(struct pt_regs *regs); +extern void arch_uprobe_disable_sstep(struct pt_regs *regs); #endif /* _ASM_UPROBES_H */ diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index f81e940..bf98841 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -412,3 +413,173 @@ int analyze_insn(struct task_struct *tsk, struct uprobe *uprobe) prepare_fixups(uprobe, &insn); return 0; } + +/* + * @reg: reflects the saved state of the task + * @vaddr: the virtual address to jump to. + * Return 0 on success or a -ve number on error. + */ +void set_ip(struct pt_regs *regs, unsigned long vaddr) +{ + regs->ip = vaddr; +} + +/* + * pre_xol - prepare to execute out of line. + * @uprobe: the probepoint information. + * @regs: reflects the saved user state of @tsk. + * + * If we're emulating a rip-relative instruction, save the contents + * of the scratch register and store the target address in that register. + * + * Returns true if @uprobe->opcode is @bkpt_insn. + */ +#ifdef CONFIG_X86_64 +int pre_xol(struct uprobe *uprobe, struct pt_regs *regs) +{ + struct uprobe_task_arch_info *tskinfo = ¤t->utask->tskinfo; + + regs->ip = current->utask->xol_vaddr; + if (uprobe->fixups & UPROBES_FIX_RIP_AX) { + tskinfo->saved_scratch_register = regs->ax; + regs->ax = current->utask->vaddr; + regs->ax += uprobe->arch_info.rip_rela_target_address; + } else if (uprobe->fixups & UPROBES_FIX_RIP_CX) { + tskinfo->saved_scratch_register = regs->cx; + regs->cx = current->utask->vaddr; + regs->cx += uprobe->arch_info.rip_rela_target_address; + } + return 0; +} +#else +int pre_xol(struct uprobe *uprobe, struct pt_regs *regs) +{ + regs->ip = current->utask->xol_vaddr; + return 0; +} +#endif + +/* + * Called by post_xol() to adjust the return address pushed by a call + * instruction executed out of line. + */ +static int adjust_ret_addr(unsigned long sp, long correction) +{ + int rasize, ncopied; + long ra = 0; + + if (is_32bit_app(current)) + rasize = 4; + else + rasize = 8; + ncopied = copy_from_user(&ra, (void __user *) sp, rasize); + if (unlikely(ncopied)) + goto fail; + ra += correction; + ncopied = copy_to_user((void __user *) sp, &ra, rasize); + if (unlikely(ncopied)) + goto fail; + return 0; + +fail: + printk(KERN_ERR + "uprobes: Failed to adjust return address after" + " single-stepping call instruction;" + " pid=%d, sp=%#lx\n", current->pid, sp); + return -EFAULT; +} + +#ifdef CONFIG_X86_64 +static bool is_riprel_insn(struct uprobe *uprobe) +{ + return ((uprobe->fixups & + (UPROBES_FIX_RIP_AX | UPROBES_FIX_RIP_CX)) != 0); +} + +static void handle_riprel_post_xol(struct uprobe *uprobe, + struct pt_regs *regs, long *correction) +{ + if (is_riprel_insn(uprobe)) { + struct uprobe_task_arch_info *tskinfo; + tskinfo = ¤t->utask->tskinfo; + + if (uprobe->fixups & UPROBES_FIX_RIP_AX) + regs->ax = tskinfo->saved_scratch_register; + else + regs->cx = tskinfo->saved_scratch_register; + /* + * The original instruction includes a displacement, and so + * is 4 bytes longer than what we've just single-stepped. + * Fall through to handle stuff like "jmpq *...(%rip)" and + * "callq *...(%rip)". + */ + *correction += 4; + } +} +#else +static void handle_riprel_post_xol(struct uprobe *uprobe, + struct pt_regs *regs, long *correction) +{ +} +#endif + +/* + * Called after single-stepping. To avoid the SMP problems that can + * occur when we temporarily put back the original opcode to + * single-step, we single-stepped a copy of the instruction. + * + * This function prepares to resume execution after the single-step. + * We have to fix things up as follows: + * + * Typically, the new ip is relative to the copied instruction. We need + * to make it relative to the original instruction (FIX_IP). Exceptions + * are return instructions and absolute or indirect jump or call instructions. + * + * If the single-stepped instruction was a call, the return address that + * is atop the stack is the address following the copied instruction. We + * need to make it the address following the original instruction (FIX_CALL). + * + * If the original instruction was a rip-relative instruction such as + * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent + * instruction using a scratch register -- e.g., "movl %edx,(%rax)". + * We need to restore the contents of the scratch register and adjust + * the ip, keeping in mind that the instruction we executed is 4 bytes + * shorter than the original instruction (since we squeezed out the offset + * field). (FIX_RIP_AX or FIX_RIP_CX) + */ +int post_xol(struct uprobe *uprobe, struct pt_regs *regs) +{ + struct uprobe_task *utask = current->utask; + int result = 0; + long correction; + + correction = (long)(utask->vaddr - utask->xol_vaddr); + handle_riprel_post_xol(uprobe, regs, &correction); + if (uprobe->fixups & UPROBES_FIX_IP) + regs->ip += correction; + if (uprobe->fixups & UPROBES_FIX_CALL) + result = adjust_ret_addr(regs->sp, correction); + return result; +} + +void arch_uprobe_enable_sstep(struct pt_regs *regs) +{ + /* + * Enable single-stepping by + * - Set TF on stack + * - Set TIF_SINGLESTEP: Guarantees that TF is set when + * returning to user mode. + * - Indicate that TF is set by us. + */ + regs->flags |= X86_EFLAGS_TF; + set_thread_flag(TIF_SINGLESTEP); + set_thread_flag(TIF_FORCED_TF); +} + +void arch_uprobe_disable_sstep(struct pt_regs *regs) +{ + /* Disable single-stepping by clearing what we set */ + clear_thread_flag(TIF_SINGLESTEP); + clear_thread_flag(TIF_FORCED_TF); + regs->flags &= ~X86_EFLAGS_TF; +} -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/