Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757922Ab1DHUcK (ORCPT ); Fri, 8 Apr 2011 16:32:10 -0400 Received: from mail-iw0-f174.google.com ([209.85.214.174]:42736 "EHLO mail-iw0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757895Ab1DHUcI (ORCPT ); Fri, 8 Apr 2011 16:32:08 -0400 From: mathieu.poirier@linaro.org To: linux-kernel@vger.kernel.org Cc: ohad@wizery.com, mathieu.poirier@linaro.org, lee.jones@linaro.org, patches@linaro.org, linus.walleij@stericsson.com Subject: [PATCH] ux500: Adding support for u8500 Hsem functionality. Date: Fri, 8 Apr 2011 14:31:53 -0600 Message-Id: <1302294713-6626-1-git-send-email-mathieu.poirier@linaro.org> X-Mailer: git-send-email 1.7.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8572 Lines: 322 From: Mathieu J. Poirier The driver is folded in the hwspinlock framework and implements protocol 1 without interrupts. Signed-off-by: Mathieu Poirier --- drivers/hwspinlock/Kconfig | 23 +++- drivers/hwspinlock/Makefile | 1 + drivers/hwspinlock/u8500_hsem.c | 241 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 261 insertions(+), 4 deletions(-) create mode 100644 drivers/hwspinlock/u8500_hsem.c diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig index 1f29bab..aa62055 100644 --- a/drivers/hwspinlock/Kconfig +++ b/drivers/hwspinlock/Kconfig @@ -2,10 +2,11 @@ # Generic HWSPINLOCK framework # -config HWSPINLOCK - tristate "Generic Hardware Spinlock framework" - depends on ARCH_OMAP4 - help +menuconfig HWSPINLOCK + bool "Generic Hardware Spinlock framework" + depends on ARCH_OMAP4 || ARCH_U8500 + default n + ---help--- Say y here to support the generic hardware spinlock framework. You only need to enable this if you have hardware spinlock module on your system (usually only relevant if your system has remote slave @@ -13,6 +14,8 @@ config HWSPINLOCK If unsure, say N. +if HWSPINLOCK + config HWSPINLOCK_OMAP tristate "OMAP Hardware Spinlock device" depends on HWSPINLOCK && ARCH_OMAP4 @@ -21,3 +24,15 @@ config HWSPINLOCK_OMAP introduced in OMAP4). If unsure, say N. + +config HSEM_U8500 + tristate "STE Hardware Semaphore functionality" + depends on HWSPINLOCK && ARCH_U8500 + help + Say y here to support the STE Hardware Semaphore functionality. They + provide a synchronisation mechanism for the various processor on the + SoC. + + If unsure, say N. + +endif # HWSPINLOCK diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile index 5729a3f..93eb64b 100644 --- a/drivers/hwspinlock/Makefile +++ b/drivers/hwspinlock/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o +obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c new file mode 100644 index 0000000..3963f2a --- /dev/null +++ b/drivers/hwspinlock/u8500_hsem.c @@ -0,0 +1,241 @@ +/* + * u8500 HWSEM driver + * + * Copyright (C) 2010-2011 ST-Ericsson + * + * Implements u8500 semaphore handling for protocol 1, no interrupts. + * + * Author: Mathieu Poirier + * Heavily borrowed from the work of : + * Simon Que + * Hddari Kanigeri + * Ohad Ben-Cohen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hwspinlock_internal.h" + +#define U8500_MAX_SEMAPHORE 32 /* a total of 32 semaphore */ +#define RESET_SEMAPHORE (0) /* free */ + +/* CPU ID for master running u8500 kernel. + * Hswpinlocks should only be used to synchonise operations + * between the Cortex A9 core and the other CPUs. Hence + * forcing the masterID to a preset value. + */ +#define HSEM_MASTER_ID 0x01 + +#define HSEM_REGISTER_OFFSET 0x08 + +#define HSEM_CTRL_REG 0x00 +#define HSEM_ICRALL 0x90 +#define HSEM_PROTOCOL_1 0x01 + +#define to_u8500_hsem(lock) \ + container_of(lock, struct u8500_hsem, lock) + +struct u8500_hsem { + struct hwspinlock lock; + void __iomem *addr; +}; + +struct u8500_hsem_state { + void __iomem *io_base; /* Mapped base address */ +}; + +static int u8500_hsem_trylock(struct hwspinlock *lock) +{ + struct u8500_hsem *u8500_lock = to_u8500_hsem(lock); + + writel(HSEM_MASTER_ID, u8500_lock->addr); + + /* get only first 4 bit and compare to masterID. + * if equal, we have the semaphore, otherwise + * someone else has it. + */ + return (HSEM_MASTER_ID == (0x0F & readl(u8500_lock->addr))); +} + +static void u8500_hsem_unlock(struct hwspinlock *lock) +{ + struct u8500_hsem *u8500_lock = to_u8500_hsem(lock); + + /* release the lock by writing 0 to it */ + writel(RESET_SEMAPHORE, u8500_lock->addr); +} + +/* + * u8500: what value is recommended here ? + */ +static void u8500_hsem_relax(struct hwspinlock *lock) +{ + ndelay(50); +} + +static const struct hwspinlock_ops u8500_hwspinlock_ops = { + .trylock = u8500_hsem_trylock, + .unlock = u8500_hsem_unlock, + .relax = u8500_hsem_relax, +}; + +static int __devinit u8500_hsem_probe(struct platform_device *pdev) +{ + + struct u8500_hsem *u8500_lock; + struct u8500_hsem_state *state; + struct hwspinlock *lock; + struct resource *res; + void __iomem *io_base; + int i, ret; + ulong offset, val; + + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + state = kzalloc(sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + io_base = ioremap(res->start, resource_size(res)); + if (!io_base) { + ret = -ENOMEM; + goto free_state; + } + + /* make sure protocol 1 is selected */ + val = readl(io_base + HSEM_CTRL_REG); + writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG); + + /* clear all interrupts */ + writel(0xFFFF, io_base + HSEM_ICRALL); + + state->io_base = io_base; + + platform_set_drvdata(pdev, state); + + /* no pm needed for HSem but required to comply + * with hwspilock core. + */ + pm_runtime_enable(&pdev->dev); + + offset = HSEM_REGISTER_OFFSET; + + for (i = 0; i < U8500_MAX_SEMAPHORE; i++) { + u8500_lock = kzalloc(sizeof(*u8500_lock), GFP_KERNEL); + if (!u8500_lock) { + ret = -ENOMEM; + goto free_locks; + } + + u8500_lock->lock.dev = &pdev->dev; + u8500_lock->lock.owner = THIS_MODULE; + u8500_lock->lock.id = i; + u8500_lock->lock.ops = &u8500_hwspinlock_ops; + u8500_lock->addr = io_base + offset + sizeof(u32) * i; + + ret = hwspin_lock_register(&u8500_lock->lock); + if (ret) { + kfree(u8500_lock); + goto free_locks; + } + } + + return 0; + +free_locks: + while (--i >= 0) { + lock = hwspin_lock_unregister(i); + /* this should't happen, but let's give our best effort */ + if (!lock) { + dev_err(&pdev->dev, "%s: cleanups failed\n", __func__); + continue; + } + u8500_lock = to_u8500_hsem(lock); + kfree(u8500_lock); + } + + iounmap(io_base); +free_state: + kfree(state); + return ret; +} + +static int u8500_hsem_remove(struct platform_device *pdev) +{ + struct u8500_hsem_state *state = platform_get_drvdata(pdev); + struct hwspinlock *lock; + struct u8500_hsem *u8500_lock; + void __iomem *io_base; + int i; + + io_base = state->io_base; + + /* clear all interrupts */ + writel(0xFFFF, io_base + HSEM_ICRALL); + + for (i = 0; i < U8500_MAX_SEMAPHORE; i++) { + lock = hwspin_lock_unregister(i); + /* this shouldn't happen at this point. if it does, at least + * don't continue with the remove */ + if (!lock) { + dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i); + return -EBUSY; + } + + u8500_lock = to_u8500_hsem(lock); + kfree(u8500_lock); + } + + iounmap(io_base); + kfree(state); + + return 0; +} + +static struct platform_driver u8500_hsem_driver = { + .probe = u8500_hsem_probe, + .remove = u8500_hsem_remove, + .driver = { + .name = "u8500_hsem", + }, +}; + +static int __init u8500_hsem_init(void) +{ + return platform_driver_register(&u8500_hsem_driver); +} +/* board init code might need to reserve hwspinlocks for predefined purposes */ +postcore_initcall(u8500_hsem_init); + +static void __exit u8500_hsem_exit(void) +{ + platform_driver_unregister(&u8500_hsem_driver); +} +module_exit(u8500_hsem_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hardware Semaphore driver for u8500"); +MODULE_AUTHOR("Mathieu Poirier